Upgrading from FrameMaker 7 to 8

Hi all,
I'm the one that posted the topic http://www.adobeforums.com/webx/.59b6575e/0 but seems that noone has a good answer to the problem.
To recap, it's a problem about FrameMaker 7 + FDK 7 + Distiller 5 (i.e. there's an external C++ program that calls the FrameMaker and comands it via FDK). The problem is about saving as PDF, that eventually causes FM to crash (same book, same conditionals -> always crash).
At this point I'm considering to switch to FM 8, FDK 8 and a compatibile Distiller (???) but I don't know how painful that could be.
Does anyone know if:
- books written into FM 7 have to be converted to be used with FM 8
- books written into FM 7 looks the same when printed with FM 8
- the FDK 7's API are compatible with the FDK 8's
- there are overall consideration to be made prior to embark in switching between 7 and 8
Any advice is appreciated, either about solving/inspecting the FM 7 crash, either about the upgrade from 7 to 8.
Thanks for your work,
n3u.

Well,
I managed to get a VC2005 and to fierce fight to get my application recompiled with FDK8.
Then, to let it run, I had to face funky errors like missing icuuc28.dll, icudt28l.dll, icuin28.dll that are actually shipped with FM8 but not into the right place (system32). I wonder if that files will have to be copied inside the system32 directory for each workstation that will need to run my application!
Besides this, the application finally run and in a certain way it worked! What's shocking is that after the PDF creation the FM8 crashes abruptly giving a nice set of new errors:
1 - The font information for your system has changed. This change may affect the format and output of your document(s);
2 - Internal Error: 8004, 6343724, 8484240, 0;
3 - The function XXXX referenced memory that was "read" (or something like that).
I wonder what's going on!
Of course the fact that the PDF is created until the last page it's a good new, but all that bunch of errors are quite scaring and however not quite a sign of stability.
Do you know the new error I am getting?
There's something that can be done to further inspect the problem?
Thanks alot,
n3u.

Similar Messages

Just upgraded from FrameMaker 7.2 to version 12. When I try to create a pdf of a book using .ps file, this crashes. When I use the SaveAsPDF option, the graphics either missing or only partially shown in the resulting PDF. Any ideas?

I just upgraded from FrameMaker 7.2 to version 12. When I create the .pdf of a book using the SaveAsPDF option, the many of the graphics are either missing or partially missing. Any ideas why?

1. Check to see whether you're fully patched (the latest release is 12.0.4 - you need to install the patches in order).
2. Use the RGB option instead of the CMYK (unless you are creating output for press production).

[error]Upgrading from FRAMEMAKER 6 to 8

Hi
I have upgrade from FRAMEMAKER 6 to FRAMEMAKER 8 with the upgrade and now all my links are broken.
The error i have is that he can't open a document because he can't find it
In FRAMEMAKER my link are openObjectID Partie11.FM:253461
and when i save the book to a PDF all my link are broken
Thanks for help

Jean-Joseph,
In all likelihood, this is just indicative of not having all of the
files converted to v.8 format when working at the book level.
The first time you open a book, you will get prompted about opening an
older version FM. The same goes for any of the book component files.
You should use the option to open all files in a book (by holding down
the shift key and select File > Open All Files), deal with the prompts
and then do a shift+File > Save All Files) to ensure that they have
been saved in the FM8 format.
As long as you haven't moved your files in between upgrades, things
should work as before.
Also, there are several patches to FM8 that you should install in
patch order. See:
http://www.adobe.com/support/downloads/product.jsp?product=22&platform=Windows

After upgrading from FM 9 to 11, FM crashes when the Print Book command is used. Suggestions?

After upgrading from FrameMaker 9 to 11, the program crashes when the Print Book command is selected to print files that were converted from FM 9 to FM11. (Resulting .pdf files are problematic, w/ broken links and non-functioning bookmarks.) Has anyone encountered this issue, and can you suggest a workaround? Thank you!

Known bug - already fixed - get the latest FM11 patch

Is there a way to export data from Framemaker 7.0 to InDesign CS3 for the MAC

I am asking this question for our Advertising department so I am not too close to the situation. Another company that is part of oujr platform designed their catalogs in Framermaker 7.0. We have Framemaker 6.0. The only reason we have it is to work with this other version of Framemaker 7.0. Our advertising people use InDesign CS3 for the Mac. Right now Advertising gives the person with Framermaker 7.0 changes to be made to their catalog. He exports the file as an IMF file and she pulls it into Framermaker 6.0.
We tried to upgrade from Framemaker 6.0 to 9.0, but that wasn't possible.
Ideally we would like to take a 600 page catalog created with Framemaker and convert it to InDesign.
We would also like to take the files created with Framemaker 7.0 and import them into InDesign.
Is there a way to do this?
Thanks in advance.
dh

You can convert FrameMaker MIF (interchange) files to InDesign with the dtptools.com MIF Filter plug-in for InDesign. The plug-in is free, because you have to pay for the pages you convert. The bigger bundle of pages you buy, the lower cost per page.
dtptools.com also has a really free plug-in for FrameMaker that converts .fm files to .mif, whole directories at a time.
The converted InDesign files usually look very close to the original FM files, but it's possible to create things in FM that fools the converter, so you'll need to look the conversions over carefully.
I reviewed MIF Filter in some detail in InDesign Magazine in a late 2007 issue.
You should be aware that InDesign CS3 is no longer sold, so you can't buy more copies for all your users to be working in the same release. While it's possible to exchange files between ID CS3 and CS4 there are some things that don't convert perfectly, so you'll still have to inspect closely. I believe the most-common issue is text reflow.
It's not clear if you intend never to go back to using FrameMaker for any of the catalog work, except perhaps for creating original text.
Without seeing an example of the catalog pages, it's impossible to recommend any useful strategies. You can post a screen shot to this forum by clicking the camera icon in the button bar above the reply entry area. Inserting with the camera puts the picture on the forum very quickly, vs. attaching the picture as a file (it takes hours or days.)
There may be other strategies for creating your catalog.
HTH
Regards,
Peter Gold
KnowHow ProServices

Moving from FrameMaker v7.2 to v11; separately licensed; can I run both on one PC?

I'm upgrading from Framemaker v7.2, after long interregnum, and have installation files for FrameMaker v11. They have separate licenses. Questions:
- What are the various installation files and folders? Or is there a doc, somewhere, that I can refer to for that info?
- Can I run both versions on one machine, and continue writing and publishing in 7.2 while learning v11?
Bill Rost

Hi Bill, I'll let others chime in on the install directories, but you can safely run multiple versions of FrameMaker on your system.
IIRC, Fm 7.2 has an Acrobat Distiller ("headless") that can coexist with installations of Acrobat Standard and Pro. That is to say, you should have no conflicts there, but installing multiple versions of Acrobat and or Acrobat/Adobe Reader is a Particularly Bad Idea.
-Matt
Matt R. Sullivan
co-author Publishing Fundamentals: Unstructured FrameMaker 11

Upgrading from TCS 2.0 to TCS v. 2.5 - Know What You're Getting!!!

I'm not the type to normally write in forums but I just went through 2 days of customer service and technical support hell and thought I would share the experience with the sole motivation being to spare fellow TCS users the aggravation and make you aware of a possible disconnect between sales and technical support - know what you`re getting!!
Yesterday I purchased the upgrade from TCS 2.0 to TCS 2.5 from the Adobe online store as an electronic download. After receiving a confirmation email I logged into my Adobe account and noted that the download page contained 2 serial numbers, one for Photoshop CS5, one for Captivate 5 and then a zip folder for UPDATES only to Framemaker and Robohelp and also 2 language packs for text-to-speech for Captivate 5. Obviously I was missing links to Framemaker, Robohelp and Acrobat.
The goal of my purchase was to procure an additional licence in order to install TCS v 2.5 on 2 additional computers so, I had a sick feeling that I may have misunderstood what was offered in the upgrade; I then had the following conversation with Adobe`s Chat Live Now (excerpted from transcript):
Me: Hi. I just purchased the upgrade from TCS 2.0 to TCS 2.5. My expectation was that this contained all programs within the suite yet on my downloads the only programs that are listed are Photoshop CS5 and Captivate 5. Does this upgrade package not include the ability to install Framemaker, Robohelp and Acrobat. I purchased on the assumption that the upgrade would constitute an additional licence for these products as well. Was I wrong?
Perkins: ...TCS includes all programs, you need to select those programs while installing.
Me: Okay, I'm just downloading it now so I will confirm that it does, in fact, include all of the programs. So just to clarify, my original understanding was correct and the upgrade provides me with 2 additional licences for TCS?
Perkins: Yes. You can install 1 copy of the software on 2 computers with same Operating System.
Okay - fair enough, I then re-visited the Adobe Technical Communication Suite 2.5 web page under Upgrade--Reasons to Upgrade where it states:
``Work with full new versions of Adobe professional tools for technical communicators and help authors, including Adobe® FrameMaker® 9, Adobe RoboHelp® 8, Adobe® Captivate® 5, Adobe Acrobat® 9 Pro Extended, and Adobe Photoshop® CS5 software``.
Now to me, FULL means full versions. I subsequently entered customer service hell and spent an hour and a half on the phone being transferred through 5 different people, none of whom were familiar with the contents of the Technical Communication Suite. It took forever jsut to get them to understand that I weas upgrading from TCS version 2.0 and NOT trying to upgrade from Photoshop CS4 and Captivate 4 directly. Eventually my question as to whether I was entitled to an additional licence for Framemaker, Robohelp and Acrobat Pro Extended was elevated to Tier 2 and I was told I would be contacted by Adobe. Today I received a voicemail and email stating that I should install Framemaker, Robohelp and Acrobat Pro Extended from my original TCS v 2.0 installer. I subsequently did so (successfully) and then installed Captivate 5 without issue.
The next challenge arose with Photshop CS5 - the serial number, according to the installer, was invalid. Back to customer support who referred me to technical support - turns out the download link on my Adobe account download page was for a Chinese language-only version of Photoshop Extended which doesn`t even come with TCS 2.5! So, another 90 minutes on the phone throughout which I keep seeking clarification, does TCS 2.5 grant me an additional licence for Framemaker 9, Robohelp 8 and Acrobat 9 Pro Extended...
Technical Service states they can send me a physical disc with installers for Photoshop CS 5 and Captivate 5 and then CONFIRMED that I am NOT entitled to any additional licences for Framemaker, Robohelp or Acrobat, I am ONLY entitled to the 2 installs under the original TCS version 2 licence. This of course runs completely contrary to the literature on the website and my conversation with Live Chat Now. In disgust, I have submitted a refund request.
Just for kicks I decided to again try to clarify with Live Chat Now what products that I, as a customer, receive a licence for by purchasing the upgrade to TCS v 2.5 and have pasted the transcript of that chat as follows;
Me: Can you please confirm for me whether upgrading from the Adobe Technical Communication Suite version 2.0 to version 2.5 entitles me to 1 additional licence for ALL of the applications that constitute the Technical Communication Suite (i.e. Robohelp, Acrobat, Framemaker, Captivate, Photoshop and Presenter) OR does it merely entitle me to 1 licence to install Photoshop CS5 and Captivate 5 in conjunction with my pre-existing TCS 2.0 installation?
Morph: Give me a minute, Im reading it.
Me: sure
Morph: When you place the order for upgrade, you will get new products.
Me: I understand that I will get Photoshop CS5 and Captivate 5 BUT do I also get Framemaker, Acrobat and Robohelp?
Morph: Adpbe eLearning Suite 2 includes: Adobe Captivate 5, Flash Professional CS5, Dreamweaver CS5, Photoshop CS5 Extended, Acrobat 9 Pro, Adobe Presenter 7 (Available only on Windows platform), Soundbooth CS5.
Morph: No.
Morph: Only Acrobat is Included.
Me: I am not talking about the e-Learning Suite, I am referring to the Technical Communication Suite
Morph: Oh okay, got you, first tell me, using which product you will be upgrading this from?
Me: TCS 2.0
Morph: Okay.
Morph: Yes, if you do this upgrade you will get Adobe FrameMaker 9, RoboHelp 8, Adobe Captivate 5, Photoshop CS5, Acrobat 9 Pro Extended, and Adobe Presenter 7
Me: so this will entitle me to 1 additional licence for all of these applications, over and above the licence I already own for the TCS version 2?
Morph: Correct, however, you may also be installing the software (Upgrade version) directly without uninstalling the previous version of the software.
Me: So just to clarify, if I purchase the upgrade and decide that I want to install on a completely different machine than the two computers that already have TCS version 2.0 installed (as entitled by my licence) then I will be able to, in effect, install the TCS 2.5 onto two completely different computers (as per the Adobe licence) so that, at the end of the day, I can actually have FOUR computers with TCS installed by virtue of the 2 licences that I should have - one from TCS version 2.0 and 1 licence from TCS version 2.5É
Morph: Purchasing the upgrade version product is nothing but a full version, but if you do not have the serial key for older version you cant Install the upgrade, but for full version you do no need previous version serial number.
Morph: Correct.
Morph: You can simply purchase your upgrade and verify that you have the qualifying older product during the installation process.
Morph: If it's installed on your computer, the Adobe installer will either find it or prompt you to help it find the software for verification.
Morph: If it's not installed, you will be prompted to enter the qualifying serial number for the older version.
Me: Is the download file one individual installer or an installer for each application
Morph: It is one Indiviidual Installer.
Morph: When you download it will automatically Install every program in the Suite one-by-one.
Me: Okay, the reason I have been asking is that yesterday I made this purchase yet my download page had links only to Photoshop (a Chinese language only version of Photoshop Extended which does not come with the Suite) and Captivate. There was no link whatsoever for the other applications. I went through customer service and technical support and no one, and I mean no one, could answer the questions I`ve asked you. According to customer support and the serialization team, the upgrade to v. 2.5 DOES NOT include Framemaker, Robohelp and Acrobat. As a consumer I have absolutely no idea what is right and what is wrong. How am I supposed to make an informed purchase...
Morph: did you check on the link and confirmed that it does not Include the upgrade to version 2.5?
Me: Sorry - not clear what you mean, my receipt from the Adobe store was for TCS v 2.5
Morph: Like I said upgrade for the Technical communicate suite Includes Adobe FrameMaker 9, RoboHelp 8, Adobe Captivate 5, Photoshop CS5, Acrobat 9 Pro Extended, and Adobe Presenter 7, and you should be getting all as a single download link, seems like you are not able to make it with the link to Install Individual products altogether, so you need to contact our Customer Service at 800-833-6687. for the
Morph: precise Info.
Me: I went through that route yesterday and today and they told me that the upgrade DOES NOT include the other applications. As well, I noticed that the download file size for the upgrade is 1 half the size of the full version - obviously something is missing
Me: The information you are telling me is the precise opposite of what they told me. How do I, as a consumer, get the proper answer
Morph: upgrade do Includes the product I have mentioned above.
Me: I know you`re trying to assist but I`m flummoxed - my case was escalated to Tier 2 and they told me it doesn`t include the other applications
Morph: up to some extent i can help being a sales team member, ant only customer people generate the links and have access to customer account to check what really went wrong.
Me: Is it possible to have a senior sales rep contact me - this matter of a `simple` upgrade has consumed a ridiculous amount of time. As far as my issue - Adobe tells me nothing was wrong and that the upgrade is only a licence for Photoshop and Captivate
Morph: Okay,Just a minute.
Morph: You can contact our Sales Team on 1-800-585-0774.
So, at the end of the day, sales tells me that upgrading to v 2.5 grants me an additional licence for ALL applications in the suite whereas Adobe`s own technical support has told me this is not true. Again I ask, how does a consumer make an informed choice...
I`ve been buying Adobe software for both Mac and PC since Creative Suite 2 came out and this has absolutely been the most frustrating experience I have ever had. I get great use out of the Techncial Communication Suite and thought it would be nice to have an additional licence but at the end of the day I have decided it certainly was not worth the hassle - particularly when Adobe itself can`t figure out what I am entitled to!!
I am a fan of Adobe`s software but honestly, is business that good that you can treat your customers this way????

Hi. I suspect that may indeed be the case. If so, that's fine but nowhere is it clearly articulated what a user gains by purchasing the upgrade (and I am specifically referring to an upgrade from TCS version 2 to v 2.5) and certainly sales (as evidenced by my chat transcripts where I believe I asked quite specific questions) are advising customers that you will, in fact, gain an additional licence to ALL components of the TCS by upgrading.
If it had been clearly articulated on the Adobe TCS 2.5 website that an upgrade from TCS version 2 only entitles users to install Photoshop CS5 and Captivate 5 in conjunction with the existing installation of the other components of TCS 2 - or - better yet, stated clearly that the upgrade from version 2 to 2.5 does not entitle the end-user to an additional licence for Acrobat Pro Extended, Framemaker, Robohelp and Presenter 7 then that would allow me, as a consumer, to make an informed decision whether to make the purchase. Since that is not the case, and Adobe's sales representatives are clearly advising customers otherwise, I felt compelled to post this so others don't waste their time as I did trying to sort it out. At one point I was advised that I should use my existing TCS version 2 installer to install Acrobat etc but received contradictory answers as to whether I was entitled to an additional licence for these products. At no time during my first hour and forty-five minute conversation, my second ninety minute conversation nor my third, and last, twenty minute conversation was anyone able to clearly articulate what you have stated - and - that still leaves the fact that the text on Adobe's website is misleading.
BTW - why I received a download link from Adobe for a Chinese-language-only version of Photoshop CS5 Extended is still a mystery
At the end of the day, I think the TCS (while not perfect) is a very useful tool and I will, in all probability, upgrade to the full version of TCS 3 which will, no doubt, constitute a full licence for all components of the suite. I am not attributing malicious intent to the Adobe employees, but I am saying that they themselves seem confused about what is included in the upgrade and provided contradictory statements. If Adobe employees can't provide a straight, cut-to-the-chase answer about what seems a straightforward question then that certainly creates unnecessary confusion for the customer.

Converting from Framemaker 7 to 8

Hello.
I've searched the net and these forums but cant find any help.
We upgraded from FM version 7 to FM version 8. IS there any fast methods to make the documents fm8 instead of FM7 without having to open and save every document?
I guess you can see by my question that Im pretty new with Framemaker, but do I have to expext trouble with my documents when going from 7 to 8, ie. cross references, EDD, DTD?
Does the edd og dtd tell Fm which version im using?
Thanks for your patience
Trying to get a grip

Hello Mr. Steine,
You could try the following:
1. Go to the directory under which all of your FM files reside
2. Do a Windows-Search for ".fm"-Files. Result: one big list of search results of all the .fm files under the mother directory
3. Create an empty book in FM and drag-and-drop all search-results into the book. If you hit "ctrl-A" in the window of search results, you can drag them all at once. Result: You have a book that contains all your FM files.
4. Save the book as FM8.
5. Press Shift and select "File>Open all Files in Book".
6. Press Shift and select "File>Save all Files in Book"
7. Press Shift and select "File>Close all files in Book".
If you have structured documents you need to do the following:
1. Open the edd
2. Save the edd as an FM8 document
3. Before saving the chapter documents as FM as described above you need to import the element defintions from the now-FM8-EDD into all chapter files.
4. Save the chapter files to FM8 as described above.
Hope this helps,
Regards,
Franz.
[excessive signature removed]

I upgraded from 3gs and want to use my old 3gs as an ipod. how can i update my new apple ID on the 3gs as it still shows a previous one that I had?

I recently upgraded from 3Gs to Iphone4 and want to use my old 3Gs as an ipod. how can i update
the user ID on the 3gs to a new one that I have as it is still showing a previous user ID?

Settings>Store...tap the ID shown...sign out...sign back in with the ID you want to use.

Is it really possible to upgrade from a Treo 650 to a Treo 750?

I am not a very happy customer at the moment, but any help would be greatly appreciated. I upgraded from my old Palm Tungsten to a Zire, then to a Cingular Treo 650, combining three devices into one. I have since discovered that the Treo 650 seems to have a faulty transmission mode, as I can rarely be clearly understood by whomever I call. Am on the second (or third, I have lost track) and continue to have the same problem. I get five bars of reception but can't be understood on the other end. A bit of a problem when one is trying to call 911. Am constantly told I am "breaking up". The repair shop says it "Can't duplicate the problem". OK, then I do not want to give up all the info I have stored in the fool thing, and the 750 seems to have a different system, so I thought I would try that. All the stuff I could find seemed to indicate it wouldn't be a problem to upgrade. When the 750 arrived, I tried to install the software from the CD on my Windows XP computer. No dice. Setup encounters an error and closes. Can't even look at the files, because setup tries to run any time I access the CD. From any drive. Gave it to my girlfiend to check on her computer, and the CD seemed to run fine. Other CDs work just fine on my computer. Must be some kind of conflict, but what? Tried calling the AT&T number that suggested they could help with setup, and was first connected to the business center, they routed me to the laptop center, who routed me to the network center, who said they would have to bring in the Palm customer service and connected me to a Mac guy that dumped me back to a menu that took me to someone for whom English is a second language with whom I was trying to communicate over a very poor satellite connection. They made no sense anyway. telling me first that I couldn't have two desktops running (wrong, my girlfriend has my old Zire and the CD worked fine) and then insisting that the serial number on my device had to start with a P, when it clearly does not have any alpha characters in it. Gave up on that route of assistance. Managed to get the new ActiveSync installed from my girlfriends computer over the network. Great. Now let's get my 650 synced with Outlook (which I have not used at home) and see if we can move on. Nope. First I have to update Outlook 2000 from the old Win98 to my current XP. Find the old CD, and square that away. OK, now sync to Outlook. Nope. The sync program gives an error, saying it will only sync with Outlook 98, 2000, and XP(2002). Good grief. I have Outlook 2000, and the software apparently does not recognize it. If the Palm doesn't work, there is no reason for me to keep this phone, and I am very close to returning it and abandoning the Palm entirely when I upgrade to something that works, although I dread re-entering all that information.
Post relates to: Treo 750 (AT&T)
This question was solved.
View Solution.

Thanks for the feedback. Today I installed an Enterprise version of Office 2007 I purchased a while back, but had not yet installed. Microsoft presented a few challenges, but they were quickly resolved. I then downloaded the appropriate conduit from Palm, and synced the 650 with the handheld overwriting the computer. Then used Active Destop to sync the 750. Satisfied I had moved as much info as possible, I called AT&T and had them move the phone number to the new Treo.
Bonus! When the guy at AT&T called me on the new phone to verify it, he said it sounded better than my landline.
Sorry for the streaming paragraph. When it is late I tend to write like I think.
Dave
Post relates to: Treo 750 (AT&T)

I upgraded from iPhone 3GS to iPhone 6. Everything converted fine until I deleted an app in error. When I downloaded it from iTunes, my account is no longer recognized by the app's host servers. Can I go back and re-sync one app from my old phone?

I upgraded from iPhone 3GS to iPhone 6. Everything converted fine. Yesterday I deleted an app in error. When I downloaded the software it from iTunes ( did this many times on the old 3GS), my account is no longer recognized by the app's host servers (Playtika), even though it did after the initial conversion. Can I go back and re-sync just one app from my old phone?

Try deleting what is called the iPod Photo Cache.
http://support.apple.com/kb/TS1314

I have just downloaded the upgrade from Mountain Lion to Yosemite. In the process i am now unable to gain access to iTunes. The app on desktop no longer works and the install is not able to be opened.

I Have downloaded the upgrade from Mountain Lion to Yosemite. In thee process of so doing I have lost access to iTunes.
The app on desktop no longer opens the program and having downloaded and installed as per Apple instructions, can not make a connection.

Hi, drjbuchanan.
Thank you for visiting Apple Support Communities.
Here are some troubleshooting steps that I would recommend going through when experiencing this issue.
iTunes: Troubleshooting issues with third-party iTunes plug-ins
http://support.apple.com/en-us/ts3430
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/en-us/ht2311
Cheers,
Jason H.

Can't print from IE 8 after upgrading from Vista to Windows 7

My laptop (HP Elitebook 8530w) uses two HP printers: Color LaserJet CP3525x (at work) and Deskjet 6940 (at home). Both printers are accessed across a local network.
I recently upgraded from Vista Enterprise to Windows 7 Enterprise.
Everything still prints fine (from Word, Adobe Reader, Windows Photo Viewer, etc.), except for IE 8! When I try to print a web page from IE, it prints only the page header, and otherwise the sheet is empty. This symptom occurs on both printers. (And of course this worked fine before the upgrade.)
Any ideas? Thanks for any help.
Jeff
This question was solved.
View Solution.

(same poster)
If anyone else is having this problem, I found the solution on another forum (http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/thread/920588e5-ccc4-4e24-83d6-606...).
Specifically, the following steps solved the problem:
1. If it doesn't already exist, create a directory named "Low" in your directory "C:\Users\<your_user_name>\AppData\Local\Temp\".
2. From a command prompt, issue this command: ICACLS C:\Users\<your_user_name>\AppData\Local\Temp\Low /setintegritylevel (OI)(CI)low
Jeff

Fields in read-only mode for BP transaction in upgrade from 4.72 to ECC6.0

Hello,
This is regarding the query for BP transaction in upgrade from 4.72 to ECC 6.0.
While creating BP / Changing BP system is disabling the fields in compnay code & sales area option. There is a SAP not provided 907860; and specified that the proplem is because of the delta customizing.
All the customization settings are as per the note. And the Synchronization Control is also activated. But still the fields are disabled only.
I have checked the field settings also in Cross-Application-Components & Logistic-Genral.
But these are not working for compnay code & sales area data.
please let me know if anyone has faced this type of problem / found any solution on this.
Best Regards,
Shubhada

SAP IMG -> Cross Application Components -> Master Data Synchronization  Synchronization Control -> Synchronization Control -> Activate Synchronization options
This setting allows you to activate synchronization of BP with R/3. Not maintaining the values may result in certain fields being read-only in BP.
Suggested Values:
Source Object: BP | Target Object: CUSTOMER | Active Indicator : X
Source Object: BP | Target Object: VENDOR | Active Indicator : X
Source Object: CUSTOMER | Target Object: BP | Active Indicator : X
Source Object: VENDOR | Target Object: BP | Active Indicator : X
Have you set all of the above settings??
BHARATH

Error in Access VBA Application when upgrading from Acrobat 8.0 to 9.0

Hello.
The company that I work for recently upgraded from Adobe Acrobat 8.0 to 9.0 and I`m experiencing some problems with my Access 2003 VBA Application that extracts text from PDF-files and insert it into a table. I have tried adding references to Adobe 9.0 Type Library, but still no luck. Anyone having any ideas for a workaround? See attatched image for error-message. Any help will be greatly appreciated!
Regards,
Steffan

Public Function lesPDF()
'On Error Resume Next
Dim MyDB As Database, EplanSet As DAO.Recordset, ResultSet As DAO.Recordset, SideSet As DAO.Recordset, TekstSet As DAO.Recordset
Dim AcroApp As CAcroApp
Dim AcroAVDoc As CAcroAVDoc
Dim AcroPDDoc As CAcroPDDoc
Dim AcroHiliteList As CAcroHiliteList
Dim AcroTextSelect As CAcroPDTextSelect
Dim PageNumber, PageContent, i, j
Dim Ferdig As Boolean
Dim StartPos, Length As Double
Dim PartSyntax() As String
Dim DocType() As String
Dim Content, strFileName, Temp As String
Dim k, Lengde As Integer
Plant = Form_Autoexec.cmbPlant.Value
Set AcroApp = CreateObject("AcroExch.App")
Set AcroAVDoc = CreateObject("AcroExch.AVDoc")
Set MyDB = DBEngine.Workspaces(0).Databases(0)
EplanSet.MoveLast
EplanSet.MoveFirst
Do Until EplanSet.EOF
    strFileName = EplanSet!path & EplanSet!File
    If AcroAVDoc.Open(strFileName, vbNull) <> True Then
        Exit Function
    End If
    Set AcroAVDoc = AcroApp.GetActiveDoc
    Set AcroPDDoc = AcroAVDoc.GetPDDoc
Here is some of the code, where the program stops is marked in red. This worked perfectly with Adobe 8.0. Thaks for any help or suggestions!

Upgrading from FrameMaker 7 to 8

Similar Messages

Maybe you are looking for