Upgrading linux-lqx with Aura
Hi,
I'm running into an issue upgrading linux-lqx with Aura..... please bare in mind though that I've just started using Aura so outside of simple pacman style commands I'm quite unfamiliar with it's more in-depth or advanced usage.
Basically the issue I'm running into is this:
patching file sound/usb/6fire/midi.h
patching file sound/usb/6fire/pcm.c
patching file sound/usb/6fire/pcm.h
patching file sound/usb/endpoint.c
patching file sound/usb/misc/ua101.c
patching file sound/usb/mixer.c
patching file sound/usb/usx2y/usbusx2yaudio.c
patching file tools/hv/hv_kvp_daemon.c
patching file tools/perf/config/utilities.mak
HOSTCC scripts/basic/fixdep
HOSTCC scripts/kconfig/conf.o
SHIPPED scripts/kconfig/zconf.tab.c
SHIPPED scripts/kconfig/zconf.lex.c
SHIPPED scripts/kconfig/zconf.hash.c
HOSTCC scripts/kconfig/zconf.tab.o
HOSTLD scripts/kconfig/conf
scripts/kconfig/conf --silentoldconfig Kconfig
* Restart config...
* DOS/FAT/NT Filesystems
MSDOS fs support (MSDOS_FS) [M/n/y/?] m
VFAT (Windows-95) fs support (VFAT_FS) [M/n/y/?] m
Default codepage for FAT (FAT_DEFAULT_CODEPAGE) [437] 437
Default iocharset for FAT (FAT_DEFAULT_IOCHARSET) [utf8] utf8
exFAT filesystem support (EXFAT_FS) [N/m/y/?] (NEW) aborted!
Console input/output is redirected. Run 'make oldconfig' to update configuration.
SYSHDR arch/x86/syscalls/../include/generated/uapi/asm/unistd_32.h
SYSHDR arch/x86/syscalls/../include/generated/uapi/asm/unistd_64.h
SYSHDR arch/x86/syscalls/../include/generated/uapi/asm/unistd_x32.h
SYSTBL arch/x86/syscalls/../include/generated/asm/syscalls_32.h
HOSTCC arch/x86/tools/relocs_32.o
HOSTCC arch/x86/tools/relocs_64.o
HOSTCC arch/x86/tools/relocs_common.o
HOSTLD arch/x86/tools/relocs
aura >>= Would you like to continue anyway? [Y/n] y
I've checked the PKGBUILD in /var/cache/aura/pkgbuilds and everything looks fine....
why is the input/output getting redirected and how do I solve this issue??
It seems to me that there are some new options which aren't in the previously configured pkgconfig, if this is the case how do I select the new options?
Of course I can build linux-lqx manually as I have done initially however, I would like to use Aura as it makes life much easier :-)
Thanks.
Using "makepkg" works no problem like I explained previously.... but that means manual download of the tar.gz file then compile and install.
I was really hoping for Aura to automate things to make life "sightly easier".
Aura is pretty good with everything else, including install/upgrade but just getting this to work.... if not then fine no worries but would be nice if it did work :-)
Last edited by JohnnySSH (2013-09-07 13:51:01)
Similar Messages
-
Upgrading Linux OS with E-Business suite deployed
We have a Redhat Linux AS 2.1 with E-Buisness suite 11.5.9 deployed. We want to upgrade Linux to version 3 or 4. How can we do it?
Can we just stop the Apps services and upgrade the OS and restart the Apps services? or Will it work with cloning method?
Thanks in AdvanceDefinately relink everything.
As oracle, cd $ORACLE_HOME/bin
relink all
As applmgr,
cd $IAS_ORACLE_HOME/bin
./adlnkiAS.sh
cd $ORACLE_HOME/bin
./adlnk806.sh
adadmin
relink executables for all product groups
This is also a good time to upgrade to DST compliant JDK (5.0 is the latest).
Using J2SE Version 5.0 with Oracle E-Business Suite 11i
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=304099.1 -
Local-repo ~ a local repository manager with AUR support
Hey people,
i want to announce the release of local-repo 1.6.2. I made it to easily build and manage my own repos with fancy features like:
caching & logging
config file support
AUR support - add & upgrade packages from the AUR
an ABS like PKGBUILD store
a buildlog store
package and database signing
localization
Maybe this is something for you, too.
Visit the projects website [1], if you want to know more about it.
The PKGBUILD is available in the AUR [2].
Much fun, ushi
[1] http://ushi.wurstcase.net/local-repo/
[2] https://aur.archlinux.org/packages.php?ID=56876
Edit:
The first run should be something like this:
$ mkdir testrepo && local-repo testrepo -A vim-html5-git
This will create a new repo in the directory testrepo and add vim-html5-git from the AUR.
Last edited by ushi (2012-03-31 12:04:40)Awesome! Looks like what I need, let's see if I can get it to work.
-
[SOLVED] Upgrading Linux 3.0.7-1 - 3.1-4 Breaks Wicd
As the subject points out, upgrading Linux from 3.0.7-1 to 3.1-4 seems to break Wicd on my laptop. When I do this, no wireless networks show up and if I plug in ethernet, I cannot connect to it either. I solved the problem by blacklisting the wicd daemon, unblacklisting the network daemon, and uncommenting interface=eth0 in /etc/rc.conf, then rebooting, downloading the older kernel (3.0.7-1) which I had unfortunately deleted from /etc/pacman/pkg, and downgrading with pacman -U. I wonder if anyone else had similar trouble with this update....
Last edited by tony5429 (2012-04-05 07:43:37)Can't connect to anything with Wicd anymore either.
Using testing with:
Atheros Communications AR8121/AR8113/AR8114 Gigabit or Fast Ethernet (rev b0)
Intel Corporation WiFi Link 5100
WLAN networks will still show up and apparently connect — LAN ones won't — but Wicd fails to retrieve a IP as all dhcp clients consistently time out.
Manual connection (dhcpcd for LAN + wpa_supplicant for WLAN) works just fine.
edit: Doesn't appear to be caused by that kernel update on my system, though.
edit2: Apparently Wicd's configuration files — which had worked perfectly for months — somehow turned insufficient. I had it create new ones and now it works again.
Last edited by misc (2011-11-13 10:42:49) -
Dicovering Intelligent Agent on Linux fails with VD-4565
I try to discover an Intelligent Agent 8.1.5 running on a Linux server with an Oracle 8.1.5 DB from an Oracle Enterprise Management Server 2.1. We just upgraded from OEM 2.0.4 to 2.1 and I had no problem with the Linux agent under 2.0.4.
After starting the Agent on the Linux server the SERVICES.ORA and SNMP_RO.ORA files contain the information about the services running on the server. When I start the Discovery Wizard it fails with the error 'Discovery Failed:VD-4565:The agent of the node is already being deleted'.
Then I stoped the agent and all service on the Linux server and did the following. I removed the SID_LIST entry from the LISTENER.ORA file and used the LOCAL_LISTENER init.ora parameter for the database. I know that the agent needs the SID_LIST to discover the database services, but I just wanted to give it a try. After restarting the database, listener and agent the SERVICE.ORA and SNMP_RO.ORA files did not contain any service information as expected. I tried to discover the agent again from the OEM 2.1 console and everything seemed to work fine. No errors this time. The Linux node was added to Nodes folder in the Navigator tree, but for sure no database or listener.
Therefore I put the SID_LIST back into the listener.ora file and restarted the listener and agent. The service information were included in SERVICES.ORA and SNMP_RO.ORA file again. So I tried a Refresh Node from the OEM console and the error VD-4565 showed up again.
Does anyone have any idea what's going on an how I can manage a Linux database from an OEM 2.1 console?
Any help is appreciated.
Thanks
Peter
nullHello Peter,
I, alas do not have the answer for you. But... your symptom is EXACTLY LIKE MINE!!I was running OEM 2.0.4 and Oracle on a linux box (unfortunately, today I did something wrong and blew the database away!!!, I do not want to tell you how many hours I spend getting the database up, connected and communitcating with Windows NT box running OEM!) I made the switch from 2.0.4 to 2.1, and everything quit. More or less. I fixed my tnsnames.ora file on the NT side. That allowed me to connect. I got the Agent (sortof) running on the linux box and then I could discover the linux host computer name and domain, but it would not find ANY database. Although I could connect from the linux box, the nt box using oem (direct to db), sqlplus, and Access odbc!!! All listeners were there, etc. I did check the snmp*.ora files, and they would not discover anything (linux side) even though the LISTENER was listening, and tnsnames were naming and instances were instancing. My guess is yet another bug.
Sorry for long reply. Now I will RELOAD THE ENTIRE DATABASE AND APP AGAIN!! I so far have been totally unable to run on the liux side, net assist and net easy config, but I could sucessfully bypass those apps by correctly using and configuring initSID.ora, etc and the other *.ora files.
Eric
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Peter C:
I try to discover an Intelligent Agent 8.1.5 running on a Linux server with an Oracle 8.1.5 DB from an Oracle Enterprise Management Server 2.1. We just upgraded from OEM 2.0.4 to 2.1 and I had no problem with the Linux agent under 2.0.4.
After starting the Agent on the Linux server the SERVICES.ORA and SNMP_RO.ORA files contain the information about the services running on the server. When I start the Discovery Wizard it fails with the error 'Discovery Failed:VD-4565:The agent of the node is already being deleted'.
Then I stoped the agent and all service on the Linux server and did the following. I removed the SID_LIST entry from the LISTENER.ORA file and used the LOCAL_LISTENER init.ora parameter for the database. I know that the agent needs the SID_LIST to discover the database services, but I just wanted to give it a try. After restarting the database, listener and agent the SERVICE.ORA and SNMP_RO.ORA files did not contain any service information as expected. I tried to discover the agent again from the OEM 2.1 console and everything seemed to work fine. No errors this time. The Linux node was added to Nodes folder in the Navigator tree, but for sure no database or listener.
Therefore I put the SID_LIST back into the listener.ora file and restarted the listener and agent. The service information were included in SERVICES.ORA and SNMP_RO.ORA file again. So I tried a Refresh Node from the OEM console and the error VD-4565 showed up again.
Does anyone have any idea what's going on an how I can manage a Linux database from an OEM 2.1 console?
Any help is appreciated.
Thanks
Peter<HR></BLOCKQUOTE>
null -
After IOS8 upgrade IPhone5s syncs with exchange but IPad2 syncs ONLY Mail and Contacts, NOT Calendar.
Also, my other tablet - Samsung TabS - has same issue - calendar wont sync. My IPhone and my desktop (windows) synch just fine.
Google calendar syncs on all devices. Totally stumped. Ideas anyone?
THANKS1. Log onto Outlook Web Access
2. Top right hand part of the screen select "Options"
3. Select "See All Options"
4. Select "Phone" menu
Check if you have 10 Devices registered.
If you have, you need to delete one of them to add your new Smart Phone to Exchange for synching
Check the "Last Sync Time" to indicate if this device is still active or not. -
I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows
Hi, stig2013.
I would recommend the steps in the article below. See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If you are receiving an error message, find the exact error number that you recieved in the article below and process the steps.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if you manually disconnect the device during the restore process. You can resolve this issue by using USB troubleshooting, using a different Dock Connector or Lightning Connector to USB cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
Cheers,
Jason H. -
Hello everyone. I downoaded PES 2012 for my iPhone (3GS) the I unlocked it by paying EUR 4.99. Yesterday I upgraded my iPhone with OS5 and restored all apps purchased from iTunes. It works everything except for PES 2012 because was restored the application locked. Now If I wish play the game I need to unlock again the application and consequently I have to spent again 4.99 EURO!! How can I do to unlock the application without paying again money?
Thank you in advance for your help.ATtempt to power off your device and power it back on, if that doesn't work reset all settings should resolve it for you
-
I bought Lightroom 3 or 4, can't remember which, as an online download. I then upgraded to 5 with a CD. I registered the upgrade on my Adobe account and that's where the serial number is. I just bought a new iMac and am trying to install Lightroom. The system is asking for my original serial number which I don't have. The point is. If I have the upgrade registered with my Adobe account, shouldn't that be proof that an earlier version was on my computer??? I'm really stuck. Need some advice! Thanks
LindaHi John,
Thanks for your response, but if you read my first mail, it's the original serial number that I don't have. I bought the original LR as download and have misplaced the serial number. Is there any way to find it???
Linda -
Steps to upgrading iphone 4 with iOS 5
Need steps to upgrading iphone 4 with iOS 5?
1. connect ur phone to ur mac/pc
2. open itunes ( make sure u have version 10.5 )
3. if it doesnt automatically ask u to update ur phone . click on summary and then click update
4. ensure that u backup ur data before updating.
5. click on download and install.
6. wait for a while and enjoy iOS5 -
I have upgraded Snow Leopard with Combo 10.6.8, the supplemental update and fixed permissions, but still can't open app store to upgrade to Mountain Lion. I am on the Cayman Islands. Thanks for the help!
Don't be afraid to bump this topic. There's also an App Store forum where you might repost this question, but give some of these details in your post. I'd rephrase the topic to something like "Can't use App Store to upgrade." (Instead of can't "open".) Then give the details.
https://discussions.apple.com/community/mac_app_store/using_mac_apple_store -
DUAL BOOT windows 7 and linux HELP with Current info on BIOS, MBR vs GPT, etc
I have a feeling this should be easier than what I'm making it. Please educate me on Lenovo's BIOS Setup menus, etc.
I have installed easyBCD in Windows 7, and plan to use it to set up my new boot menu with Linux Mint (and possibly other distros).
I am using a live DVD. I inserted the DVD and went into SETUP and selected to boot off the DVD drive. It started to boot into Linux and all was going well.
However, I realized that I had not checked on the Secure features (Secure Boot, EFI). So I shutdown again and went into BIOS. I went to the SECURITY menu and Disabled UEFI. Then I disabled Secure boot.
Tried to boot off the DVD and couldn't get anywhere. Kept putting me back into the window to select the boot device over and over again. THought I'd ruined my machine
Anyway, finally stumbled upon STARTUP menu, and put it into EFI Legacy, and I was able to get back into Windows 7.
Obviously before I pursue this further, I need some educaiton on your MENUS, Lenovo and EFI/Secure Boot.
I have a feeling that I can probably now install the Linux but want to make sure my settings are correct before I pursue.
Thanks, Kim
Moderator note: this thread gets more Linux-flavored with each post Moved from the "T" board to the Linux board.Hi, thanks for ans. Your specs are almost identical to my T530 ,which I should have listed. The only diff is
I have an i7 35something processor. Same intel card, RAM and HDD, not that that should matter I'm guessing.
I purposely avoided the Nvidia card because of all the heaadaches with Nvidia.
I have to teach a class tomorrow and I need to clean up my notes. (Definitely not computer related...LOL.) I don't want to be stressed out about this during class, so I plan to wait to attempt a new install tomorrow afternoon.
What I have done is find out some more info about dual booting with windows 7. I went in to windows 7 to shrink the C: partiition and it said I'd have to reserve at least 220 GB for MS! Not what I wanted; I don't really care a thing for MS. I was born and raised on Unix and Linux; I never really fiddled with MS after the demise of MS-DOS during my college days.
Given that, and the fact that I'd lose half my 500 GB HDD to the Borg, I may just chuck the entire dual boot thing and just load Linux on it.
If you say you're running Linux on it just fine, that would be a great encouragement. No HW problems at all? Everything working fine? Which distro are you using?
I plan to test Mint, Fedora, PCLinuxOS, Mageira (sp?), saybahon (sp again?), Debian Wheezy, and even Pear, LOL. I'll keep trying till I find a distro to run on my Lenovo T530, but I'm guessing all of 'em should do okay.
I have Lubuntu I could give a spin, as well and Crunchbang and Bodhi, but they're all 32 bit. (I have an antique Dell desktop that I still use down in my woman cave.) -
When trying to open iPhoto the computer says:
‘The photo library needs to be upgraded to work with this version of iPhoto.’
So I click ‘upgrade’
Then it says: ‘You can’t open your current photo library using this version of iPhoto.’
Etcetera...
What to do??
TheoIs your Apple Intel-based, poppelmacbook? If not, you should consider treating yourself to a new Mac. Last December I gave up my old because it just could not update...anything because it was not Intel-based. Updating everything on this OS to 10.9 has been confusing for me, but I just could not work with that old Mac because the updates were too smart? for my 10.6. It is upstairs now...for visiting family: games, garage band, etc.--things I never did use. Apple refurbished and purchase the extended warranty. Apple loyalist since late 1980's.
-
I just "upgraded" my iPhone with the new software. As a low vision person, your phone was always previously helpful. I now discover that I cannot use the phone easily. The font has been changed to a very narrow typeface and the greyscale has been altered to reduce contrast. The background is now grey as well rather than white. The accessibility options permit only three choices. First, increase type size. With the the low greyscale, thin typeface, increasing type size makes it HARDER to read. There is no option for contrast enhancement. Third, the background switch options suffers from the same deficit as the white background. The third choice is to enhance brightness but without the option to change contrast, this is useless. Am I missing something? Can this be fixed? How? When? Are you planning a similar negative "update"/change to other devices?
I am having the same problem. I have gone through every setting, set the bold font, contrast, larger font....everything I could find in any post to try and help - and between the new color scheme that makes it virtually impossible to use the pictures of my grandchildren as background (the picture colors now become the theme colors - which now match the colors of many of the "flat" icons...) I am finding the phone very difficult to use--espeically things like the calendar which has now become very hard to "see" and use. If I can't revert this thing to iOS6, I may have to get a different phone.
-
''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/785589]''
when i tried to upgrade in the past, i could access NOTHING. the only upgrade that would work with my mac osx 10.3.9 was the firefox 2.0.0.20.
please let me know which of your upgrades will work with my operating system.
i cannot lose contact with all my accounts. that is what happened the last time i tried to upgrade.Firefox 2.0.0.20 is the last version of Firefox that works on OS X 10.3.9
There are some alternative browsers you can try:
* iCab - http://www.icab.de/dl.php
* Classilla - http://www.floodgap.com/software/classilla/
* SeaMonkey 1.19 - http://www.seamonkey-project.org/releases/seamonkey1.1.19/
Maybe you are looking for
-
How do you get your iPod to sync on a different computer?
I recently got a laptop and my iTunes was set up to set my desktop computer as my defualt to sync to. My compter broke last month and my laptop won't sync my iPhone until I get the settings switched. How do I do this?
-
Ive tried to reset my password on different e-mails and it wont take it
everytime i try to reset my password it is not accepted
-
Mounting Cdrom Drive In Guest Domain running 1.0.3
Folks, I have followed the Admin guide on how to export Cdrom/Dvd drive from Service Domain to Guest Domain, however once allocated to the guest domain we are unable to mount the device. Any help is appreciated. Here are my bindings ldm list-bindings
-
Error with target resource of the FPGA in project tree
Good evening I am completing the tutorial about NIeval quit of CompactRIO. I am using a RIO 9631 and after compiling the 1st example(simple counter example) I get this error: "you cannot run this VI because the because the target resource does not m
-
Popup business card link in top contributors doesn't work in Chrome browser
Hello, it's probably the lowest of low priorities, but I've noticed that the popup which shows a user's business card when you drill down in the top contributors list doesn't seem to work in Google Chrome browser. Works nicely in IE. Just something t