Upgrading secondary domain - error 56166

Ok, I got my primary domain and po updated to 2014, now I'm trying to upgrade the secondary.
I've given it the IP of the primary, and username / pw set up in it.
But I get an error saying "Unable to upgrade object ( The Primary Domain needs to be updated prior to updating this domain. Error code is 56166)
Say what?
The gwadminservice says the primary is running 2014, the db is at 2014, they have been restarted just to make sure.
The secondary holds the GWIA, and that's also running 2014.
The overview shows the primary with no remarks, and a second box saying 2012 that holds the secondary.
The DB is still 1200

Not really sure what happened, I tried it again with the new db, and it crashed the first time, then I tried again with --show, and now it's running with the rebuilt db.
I've shut down the mta with --show, and started it normal again, and it's running.
The gwadminservice won't start though.
The log says
Code:
2014-04-22 00:08:59 GwAdminServiceIPC [INFO] Starting the IPC thread
2014-04-22 00:08:59 GwAdminServiceIPC [INFO] Admin service IPC listening on port 34712
2014-04-22 00:08:59 GwAdminService [INFO] Starting the domain connection refresh thread
2014-04-22 00:08:59 GwAdminService [INFO] Number of unique configuration instances is: 1
2014-04-22 00:08:59 GwAdminServiceListener [INFO] Starting admin service listener: 0.0.0.0:9710=>gate(/media/nss/GW/gate)
2014-04-22 00:08:59 GwAdminService [WARN] Error starting listener
com.novell.gw.api.common.GwRuntimeException: Missing SSL certificate for admin service listener: 0.0.0.0:9710=>gate(/media/nss/GW/gate)
at com.novell.gw.api.main.GwAdminServiceListener.buildSslContextFactory(GwAdminServiceListener.java:359)
at com.novell.gw.api.main.GwAdminServiceListener.init(GwAdminServiceListener.java:324)
at com.novell.gw.api.main.GwAdminServiceListener.start(GwAdminServiceListener.java:488)
at com.novell.gw.api.main.GwAdminService.start(GwAdminService.java:1125)
at com.novell.gw.api.main.GwAdminService.main(GwAdminService.java:278)
2014-04-22 00:08:59 GwAdminService [ERROR] No listeners running. Shutting down admin service
Now where did the SSL certificate for the adminservice go?

Similar Messages

My Apple Store App has locked up when trying to download and install upgrade 10.9.3. I get an error message NSURLE ERROR Domain error - 1012

When attempting to upgrade to 10.9.3 my Aple Store app locked up and gave me an error code of NSURLE ERROR Domain error-1012. It still thinks I need the upgrade even thogh I have successfully downloaded and installed it through another source. How can I correct this?

Hi,
That's because the download on the App store is to bussy.
I hat yersterday the same message ... after a fuw hours everything whas back to normal.
This is NOT your Mac or internet connection.
Dimaxum

Problems Removing Secondary Domain and agents

I had a secondary Domain and a gwia and webaccess agent running on an vm box. The box had issues and crashed and I was unable to recover it. I am now left with a secondary domain and two gateways that I can cannot get rid of because the edir objects are gone. I get this error when I try to connect to the gateways....E-Directory counterpart of this object does not exist. The objects are not in edir. I am also unable to delete the domain because it has subordinates left under it. What are my choices for cleaning this out. I really would like to get this resolved before I try to upgrade to GW8.
Thanks so much for your help!
Rodney Neal

This can be fairly difficult given your situation of not being able to recover the server so you might consider opening a service request with a partner or Novell Technical Support. I will try to give you the steps to follow though here..
1. You need to first get the object back in the tree. To do this, you must graft them in by selecting a container in the tree and selecting Tools|GroupWise Utilities|GW/eDIr Associations|Graft GroupWise Objects. Follow the wizard through all the steps. This should get you the objects back though I do not understand why they would be gone in the first place with just a server crash. I assume that eDir was on other servers as well so wondering if you manually deleted the objects but either way, that is what you need to do.
2. This is where it can be a bit tricky. You need to create a temp folder on the server and rebuild the secondary domain into that folder so that you have a database to work with. Just go to properties of that secondary domain and change the UNC path to point to the temp folder and then under GroupWise Utilities|System Maintenance choose Rebuild Database. In the end, there should be a wpdomain file in that temp folder.
3. Copy in all the .dc files from your primary domain root folder into this temp folder.
4. You now need to Release that secondary domain from the GroupWise system. To do this, make sure you are connected to the primary GW domain and then right click on the secondary in question and choose GroupWise Utilities|GroupWise System Maintenance and then there is an option to release secondary. This also brings up a wizard to walk you through the process.
5. Now the secondary should show up in your live system as an external system. You just need to go under Tools|GroupWise System Operations|External System Synchronization and delete the new link it automatically created.
6. Now you can just delete the objects. You may need to delete them separately from the tree afteward.
Let me know if you have any more questions or need clarification.

Secondary domain controller not able to connect from work stations.

We are using primary and secondary domain controllers. In which the secondary domain controller act as a replication server. actually the problem occurs while accessing the secondary domain controller from work stations I get the following error:
"The trust relationship between this workstation and the primary domain failed".
Any one please give as a solution.
Thank you.

Hi,
Most simple resolution would be unjoin/disjoin the computer from the domain and rejoin the computer account back to the domain.
There might be multiple reasons for this kind of behavior.
Here are a few of them:
Single SID has been assigned to multiple computers.
If the Secure Channel is Broken between Domain controller and workstations
If there are no SPN or DNS Host Name mentioned in the computer account attributes
Outdated NIC Drivers.
According your description, the second one may be the cause of your problem.
When a Computer account is joined to the domain, Secure Channel password is stored with computer account in domain controller. By default this password will change every 30 days (This is an automatic process, no manual intervention is required).
Upon starting the computer, Netlogon attempts to discover a DC for the domain in which its machine account exists. After locating the appropriate DC, the machine account password from the workstation is authenticated against the password on the DC.
If there are problems with system time, DNS configuration or other settings, secure channel’s password between Workstation and DCs may not synchronize with each other.
A common cause of broken secure channel [machine account password] is that the secure channel password held by the domain member does not match that held by the AD. Often, this is caused by performing a Windows System Restore (or reverting
to previous backup or snapshot) on the member machine, causing an old (previous) machine account password to be presented to the AD.
Follow below link which explains typical symptoms when Secure channel broken,
Typical Symptoms when secure channel is broken
http://blogs.technet.com/b/asiasupp/archive/2007/01/18/typical-symptoms-when-secure-channel-is-broken.aspx
For detailed information, please refer to the link below,
Troubleshooting AD: Trust Relationship between Workstation and Primary Domain failed
http://social.technet.microsoft.com/wiki/contents/articles/9157.troubleshooting-ad-trust-relationship-between-workstation-and-primary-domain-failed.aspx
Hope this helps.
Steven Lee
TechNet Community Support

Smtp; 551 5.7.1 relaying denied - new secondary domain does not receive email from internet

Exchange 2007 smpt error "smtp; 551 5.7.1 relaying denied" Inbound email sender gets this error when trying to send to secondary domain. This is a single server exchange setup.
Here is what we have done:
#1 We have added a new policy for the new domain and also added the new domain to my default policy. ( Result are the same whether it is in the default policy or not)
#2 I also set the new domain as Accepted domain and as Authoritative.
#3 The mailbox I am sending to has the new domain email address and the address follows the selected conventions in the policy.
#4 I have the mx record in dns and verified that using the online MXToolbox.
#5 I can telnet to the new domain mx record on port 25 and the smtp banner comes up as expected. The result and banner are the same when telneting to the primary domain.
If I send from my primary exchange domain to the new domain the mail goes through. When I reply back it also works.
What setting am i missing here? I need to get Exchange 2007 to accept inbound email from the internet.
Thx
Scot

Hi Scot,
In addition to Rich's suggestion, I would like to clarify the following thing:
If you have a relay, please ensure that you add the secondary domain to mail relay server.
What's more, here is a thread for your reference.
external senders 550 5.7.1 relaying denied
http://social.technet.microsoft.com/Forums/exchange/en-US/416ed3e3-a346-4794-ba2a-c53086f704b0/external-senders-550-571-relaying-denied-exchange-2010?forum=exchangesvrsecuremessaginglegacy
Hope it helps.
If there are any problems, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support

Secondary Domain Controller Not Authenticating Domain Users

Hi.
I have a primary domain controller running Win Srv 2012 in USA and i added a secondary domain controller 2012 in the same domain from a different location India, through VPN.so that India user accounts can authenticate by the secondary DC instead of primary
DC USA
Installation & replication of AD went fine
India domain users login is damn slow.
When i ran the command echo %logonserver% from a india client machine,it displays the USA Primary DC name which means its authenticating the users from USA primary DC.
Preferred DNS for india client machine is Secondary DC IP and alternate is Primary DC IP USA.
Please find the dcdiag results below and any help much appreciated
Performing initial setup:
Trying to find home server...
Home Server = server2
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: INDIA\server2
Starting test: Connectivity
......................... server2 passed test Connectivity
Doing primary tests
Testing server: INDIA\server2
Starting test: Advertising
Warning: DsGetDcName returned information for \\server1.tst.mycompany.com, when we were trying to reach
server2.
SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE.
......................... server2 failed test Advertising
Starting test: FrsEvent
......................... server2 passed test FrsEvent
Starting test: DFSREvent
There are warning or error events within the last 24 hours after th
replication problems may cause Group Policy problems.
......................... server2 failed test DFSREvent
Starting test: SysVolCheck
......................... server2 passed test SysVolCheck
Starting test: KccEvent
......................... server2 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... server2 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... server2 passed test MachineAccount
Starting test: NCSecDesc
......................... server2 passed test NCSecDesc
Starting test: NetLogons
Unable to connect to the NETLOGON share! (\\server2\netlogon)
[server2] An net use or LsaPolicy operation failed with error 67,
......................... server2 failed test NetLogons
Starting test: ObjectsReplicated
......................... server2 passed test ObjectsReplicated
Starting test: Replications
......................... server2 passed test Replications
Starting test: RidManager
......................... server2 passed test RidManager
Starting test: Services
......................... server2 passed test Services
Starting test: SystemLog
A warning event occurred. EventID: 0xA004001B
Time Generated: 02/22/2015 17:10:30
Event String: Intel(R) 82574L Gigabit Network Connection
A warning event occurred. EventID: 0x000727A5
Time Generated: 02/22/2015 17:11:24
Event String: The WinRM service is not listening for WS-Manageme
An error event occurred. EventID: 0x0000271A
Time Generated: 02/22/2015 17:11:24
Event String:
The server {9BA05972-F6A8-11CF-A442-00A0C90A8F39} did not regist
A warning event occurred. EventID: 0xA004001B
Time Generated: 02/22/2015 17:12:41
Event String: Intel(R) 82574L Gigabit Network Connection
A warning event occurred. EventID: 0x000003F6
Time Generated: 02/22/2015 17:19:36
Event String:
Name resolution for the name mycompany.com timed out after none
A warning event occurred. EventID: 0x00001796
Time Generated: 02/22/2015 17:28:54
Event String:
Microsoft Windows Server has detected that NTLM authentication i
his server. This event occurs once per boot of the server on the first time
A warning event occurred. EventID: 0x000727A5
Time Generated: 02/22/2015 17:33:35
Event String: The WinRM service is not listening for WS-Manageme
A warning event occurred. EventID: 0x00001796
Time Generated: 02/22/2015 17:35:54
Event String:
Microsoft Windows Server has detected that NTLM authentication i
his server. This event occurs once per boot of the server on the first time
......................... server2 failed test SystemLog
Starting test: VerifyReferences
......................... server2 passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValida
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValida
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidat
Running partition tests on : tst
Starting test: CheckSDRefDom
......................... tst passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... tst passed test CrossRefValidation
Running enterprise tests on : tst.mycompany.com
Starting test: LocatorCheck
......................... tst.mycompany.com passed test LocatorChec
Starting test: Intersite
......................... tst.mycompany.com passed test Intersite

Hi.
I have a primary domain controller running Win Srv 2012 in USA and i added a secondary domain controller 2012 in the same domain from a different location India, through VPN.so that India user accounts can authenticate by the secondary DC instead of primary
DC USA
Installation & replication of AD went fine
India domain users login is damn slow.
When i ran the command echo %logonserver% from a india client machine,it displays the USA Primary DC name which means its authenticating the users from USA primary DC.
Preferred DNS for india client machine is Secondary DC IP and alternate is Primary DC IP USA.
Firstly make sure that you have configured sites and subnets correctly. According to your information which you have two locations, you should have at least 2 sites and 2 subnets associated to them. If you have forgotten to configure subnets of India in your
site and services and assigned them to the India site you are experiencing this issue. Also make sure if clients in India has appropriate network connectivity to the domain controllers in India.
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers?

Clustering Configuration with Primary & Secondary Domain Controllers

Hello.
I am trying to configure Failover Clustering on my Server 2012 computers.
I have a primary domain, as well as a secondary domain.
We will call them dc1.domain.com and dc2.domain.com.
I have Failover Clustering Manager installed on both servers.
Upon adding them both to the Create A Cluster Wizard, I receive the following error message on my report.
(My account is fairly new, so it will not let me attach an image, but I assure you, it is safe)
s14.postimg.org/lssjm2vu9/Screenshot_1.png

More that trying to avoid clustering domain controllers, you simply cannot do it. Active Directory has high availability built into it. It is known as multimaster, meaning there is no primary and secondary domain controllers. All are 'masters',
meaning you can make changes on any domain controller and the change will be replicated to the other DCs.
If you only have two physical servers and you want to cluster them, you will first need to install the Hyper-V role on the servers (it is not recommended to install both Hyper-V and Domain Controller on the same box, so we will get this fixed). Once
you have Hyper-V installed, build a VM on each server, join them to the domain, and promote them to domain controllers. On one of the VMs, seize the FSMO roles from the FSMO master. Then demote the physical hosts from being domain controllers.
You can now form a cluster of the two physical servers.
. : | : . : | : . tim

Removing a secondary domain

I am in the process of upgrading our GW system to 2012 and cleaning up some unneeded stuff in the GW system. I have a secondary domain running with the post office off of it that is no longer needed. I deleted the post office already. Now, the documentation says you can just delete the domain if there are no subordinate objects off of it, which there aren't, but then I see articles on going through a process of releasing it and then creating external system and then deleting it. What is the difference between the two procedures and in my case can't I just connect to priimary domain and delete the secondary objects?

Originally Posted by jlewter
I am in the process of upgrading our GW system to 2012 and cleaning up some unneeded stuff in the GW system. I have a secondary domain running with the post office off of it that is no longer needed. I deleted the post office already. Now, the documentation says you can just delete the domain if there are no subordinate objects off of it, which there aren't, but then I see articles on going through a process of releasing it and then creating external system and then deleting it. What is the difference between the two procedures and in my case can't I just connect to priimary domain and delete the secondary objects?
As Laura already mentioned, simply deleting the secondary domain object while having the MTA's running is the easiest way to to it. You might need to unlink paths to and from the domain you are deleting before you are allowed to do so. But that's it.
The only reason I've ever used the release method, is when dealing with an old domain object that wasn't cleaned up but the server that was hosting the domain was long gone, or when having to split off a part of a GroupWise system into it's own system/join another.
Cheers,
Willem

Unable to rebuild secondary domain.

When I try to rebuild one of my secondary domains, I follow the procedure below.
https://www.novell.com/documentation...t_rebuild.html
The task says that the rebuild is complete, but when I start the MTA back, the service crashes. When I try to launch the command by hand using "./gwmta -show -home /opt/novell/groupwise/domain", I get a segmentation fault error. If I remove the wpdomain.db file and copy the backed up file back in, I reboot the server and the services start fine.
Any Ideas?
Thanks,
Jayson Rainsberger

Hi Jayson,
Perhaps try the rebuild from the command line using the gwadminutil.
Documentation reference: http://www.novell.com/documentation/...w-rebuild.html
Please let us know how it goes.
Cheers,

SharePoint 2013 site collection 'upgrade completed with errors'

Hi All,
I am in process to upgrade SharePoint 2010 to SharePoint 2013 with all steps as mentioned in TechNet.
I was able to get all the SP2010 UI in SP2013 environment. However, when I navigated to top level site and clicked on “Site
Collection health checks”. In SP2010 environment I never used (as Farm Admin) any Video content type. It belongs
to out-of-the-box "digital asset content types" and cannot be deleted.
Therefore I changed the name of Video to our department name like "Video - Company" and ran the site collection health check again. This time there was no conflict for content types.
After ran the site collection upgrade I got following error.
-------------------------------------------START------------------------------------------
05/05/2014 14:34:28.66 OWSTIMER (0x1474)
0x123C SharePoint Foundation Upgrade
SPFeatureDefinition aj2bj
ERROR Feature upgrade action 'AddContentTypeField' threw an exception upgrading Feature 'CTypes' (Id: 15/'695b6570-a48b-4a8e-8ea5-26ea7fc1d162') in Site 'http://sp13fe01-dev': Field type
Rating is not installed properly. Go to the list settings page to delete this field.
32d48d9c-70d4-f09a-6073-526808f844be
05/05/2014 14:34:53.04 OWSTIMER (0x1474)
0x123C SharePoint Foundation Upgrade
SPSiteWssSequence2 ajy6m
ERROR Feature upgrade incomplete for Feature 'CTypes' (Id: 15/'695b6570-a48b-4a8e-8ea5-26ea7fc1d162') in Site 'http://sp13fe01-dev'. Exception: Field type Rating is not installed properly. Go to the list settings
page to delete this field. 32d48d9c-70d4-f09a-6073-526808f844be
05/05/2014 15:18:43.95 OWSTIMER (0x1474)
0x123C SharePoint Foundation Upgrade
SPManager ajxoe
ERROR RunUpgradeSiteSession [SPSite Url=http://sp13fe01-dev] failed.
32d48d9c-70d4-f09a-6073-526808f844be
05/05/2014 15:18:44.16 OWSTIMER (0x1474)
0x123C SharePoint Foundation Upgrade
SPManager ajxoe
ERROR Exception: Upgrade completed with errors. Review the upgrade log file located in C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS\SiteUpgrade-20140505-143330-61.log. The
number of errors and warnings is listed at the end of the upgrade log file.
32d48d9c-70d4-f09a-6073-526808f844be
05/05/2014 15:18:44.16 OWSTIMER (0x1474)
0x123C SharePoint Foundation Upgrade
SPManager ajxoe
ERROR at Microsoft.SharePoint.Upgrade.SPUpgradeSession.CheckPoint() at Microsoft.SharePoint.Upgrade.SPUpgradeSession.LogEnd() at Microsoft.SharePoint.Upgrade.SPManager.RunUpgradeSiteSessionCore(Object
lockObject, SPSite site, SPUpgradeOperationFlags upgradeOperationFlags, Boolean checkConcurrentSiteUpgradeSessi
32d48d9c-70d4-f09a-6073-526808f844be
-----------------------------------END-------------------------------------
Feature ID 695b6570-a48b-4a8e-8ea5-26ea7fc1d162 is Standard Content Type Definitions https://social.technet.microsoft.com/wiki/contents/articles/7695.sharepoint-2010-list-of-features-id-displayname-and-scopes.aspx.
Any expert to solve the issue??
Thank you.
regards,
Aroh Shukla

Hi All and Inderjeet,
Thanks for your reply and pointers.
I did follow the steps as mentioned in the links above. I used some third party solutions but not for any Video solution. I was able to successfully migrated the SP2010 (WSS_Content) to SP2013 (WSS_Content) environment a few weeks back with exactly same
third party solutions and no site collection error:
I renamed the default and out-of-the box video site content type as shown:
I ran the "Site Collection Health Check" and did not receive any error as in my second screenshot.
But, after upgrade the Site Collection Upgrade and got the same errors.
I don't know if there is any SharePoint Server 2013 patch gave this error as I keep run the Windows Server 2012 (not running R2) and SharePoint Server 2013 regularly.
Can suggest how to resolve this error?
Many Thanks!!
--Aaroh
Aroh Shukla
The same here. Opening a support ticket with MS.

Yahoo email account on iphone 4s error message MFMessageError Domain error 1032 keeps coming up trying to log into my email. Why does this happen?

I'm trying to log in to my yahoo email account on iphone 4s and the error message MFMessage Domain error 1032 keeps on coming up. Why is this happening and how can I fix it?

What worked for me was resetting my password on my email then rebooted my iPhone 4S.

No Such Domain error

Hi
Why do I get a "No Such Domain" error page when trying to login ?
Michael

what are you putting in the URL when you try to login?
michaels wrote:
Hi
Why do I get a "No Such Domain" error page when trying to login ?
Michael

Cross Domain error for Silverlight + MVC application with self hosted WCF service on azure

Hi,
We are migrating existing Silverlight application to MVC; existing Silverlight application is hosted on
Azure which is consuming self-hosted WCF service. For authentication we have implemented
ADFS with WIF (passive). The cloud service (<myWebSite>.cloudapp.net) is C Name to (<myWebSite>.<myDomain>.com) and we
are consuming WCF service at <myWebSite>.cloudapp.net/<myService>.svc, as we were getting “Cross Domain” error so we have added “clientaccesspolicy.xml” at the root of “WEB ROLE”.
Existing Silverlight application works fine but the problem occurred when we deploy our migrated application to the same cloud service. We are getting a “Cross Domain” error.
The same migrated application works fine on UAT environment, the only difference is UAT environment is
without ADFS WIF implementation.
Migrated application is half Silverlight and half MVC with initial landing page is Silverlight. MVC web role is used to host the service i.e. .SVC . To go to SL landing page , redirected from home controller. Following is being observed in fiddler for this
application
Existing Silverlight application -
After authentication with ADFS it redirect to Silverlight landing page.
Before calling service method it looks for “clientaccesspolicy.xml”
In response header we are getting the content of “clientaccesspolicy.xml”
And after this everything works fine
Migrated Silverlight-MVC application –
After authentication with ADFS it redirects to “HomeController” and from there we are redirecting to Silverlight landing page.
Before calling service method it looks for “clientaccesspolicy.xml”
In response header we are getting following content - “https://federation-sts.<myDomain>.com/adfs/ls/?wa=wsignin1.0&
wtrealm=https%3a%2f%2f<myWebSite>.<myDomain>.com&
wctx=rm%3d0%26id%3dpassive%26ru%3d%252fclientaccesspolicy.xml&wct=2014-03-17T10%3a36%3a04Z”
4.Throw “Cross Domain” error.
Also we have added filter in
RouteConfig
for .xml file
routes.IgnoreRoute("{*allxml}",
new { allxml = @".*\.xml(/.*)?" });
NOTE: There is no configuration change apart from MVC configuration.
We have done RDP to web role and found that “clientaccesspiolicy.xml” is present at “E:\approot” location and it is also accessible at “https://<myWebSite>.<myDomain>.com/clientaccesspolicy.xml”.
Please help
Thanks,
Rahul P

Hi,
Please try to configure the cross domain policy file to allow public read access (that is, access it without federation requirement), make sure you can access the address
http://something/clientaccesspiolicy.xml directly in a browser
without redirecting to check whether the cross domain policy file could be anonymous accessed (Please start a new browser session and make sure you're
not logged in. Then test the cross domain policy file.).
Best Regards,
Ming Xu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Itunes was working fine. Tries to install latest upgrade and get error message about an invalid character in the path "Program Files (x86)". PC, Win7, nothing else appears to be having same issue.

Itunes was working fine. Tried to install latest upgrade and get error message about an invalid character in the path "Program Files (x86)". PC, Win7, nothing else appears to be having same issue. Program still works, simply cannor upgrade.

Thanks b noir,
I tried this solution without success. After FixIt ran and didn't find a problem, either in looking for issues with "software upgrade" or "iTunes" it kindly offered to help me uninstall iTunes. I had thought of this as a possibilty but it seems to me that if you do that you lose a lot of "non-native-to-Apple" information you might have entered. I did this once and recovery was painfull. Is there a way to uninstall iTunes without losing all of that sort of thing? Any help would be appreciated.

I signed up tp lastPass premium and installed the app on my phone. I can no longer download mail. I am asked for a password which I supply my my email but it is not recognised and says there is a domain error. Can anybody help please

I signed up to lastPass premium and installed the app on my phone. I can no longer download mail. I am asked for a password (I give my normal log-in) but it is not recognised and says there is a domain error. Can anybody help please

Try deleting that app, then see if you have the same issue.

Upgrading secondary domain - error 56166

Similar Messages

Maybe you are looking for