BAPI to create network - CJ21
Hi all,
I was trying without success to implement the BAPI_NETWORK_MAINTAIN, to create a network. Is this the correct option, or is there a better one for this?
Best Regards,
Pedro
Hi,
You are using the corect option.
Pls refer:
SAP Project System - A ready Reference ( Part 2 )
Regards,
Amit
Similar Messages
-
BAPI to create network (T-code CJ21)
Hi all,
I was trying without success to implement the BAPI_NETWORK_MAINTAIN, to create a network. Is this the correct option, or is there a better one for this?
Best Regards,
PedroUse FM: BAPI_BUS2002_CREATE
And Read the Documentation FM carefully, below are the Few Imp lines which you have to keep in mind before using BAPI:
Internal number assignment of the network number
The network profile is the only required-entry field. The BAPI fails if an external network number is entered in the interface.
When the BAPI finishes successfully, the final network number has not been determined yet. Instead, the log of the return table ET_RETURN contains a temporary network number. -
Hi everyone,
Could anyone tell me if there is a BAPI for creating a Request For Quotation, please?
I found several BAPIs that create a Quotation, such as BAPI_QUOTATION_CREATEFROMDATA, or BAPI_QUOTATION_CREATEFROMDATA2.
If there are no BAPIs for RFQ, would it be possibile to use one of these 2, and modify the document in some way to get an RFQ? Has anyone tried something like this before?
Thanks, and best regards
SrdjHi,
You can use two BAPIs:
BAPI_QUOTATION_CREATEFROMDATA
BAPI_QUOTATION_CREATEFROMDATA2
(1) BAPI_QUOTATION_CREATEFROMDATA ,this BAPI is released in 4.0A version .
(2) BAPI_QUOTATION_CREATEFROMDATA2 this BAPI is released in latest version ,the kernal level patches provides more security when this BAPI is called from an external application across variuos networks.
If ever using the BAPI internally with in sap or calling it from the application within the same network the only diff using the old BAPI wud be in the next future upgrades SAP wud not support the BAPI_QUOTATION_CREATEFROMDATA but the usage wise and functionality wise there is no diff.
CODE
Data: loc_bp type BAPIBUS1006_HEAD-BPARTNER.
data: re_return like BAPIRET2 occurs 0.
data: wa_return type BAPIRET2.
data: re_order_header_in like BAPISDHD1.
data: wa_BAPISDH1X type BAPISDH1X.
data: order_partners like BAPIPARNR occurs 0 with header line.
data: order_items_in like BAPISDITM occurs 0 with header line.
data: order_items_sched LIKE bapischdl OCCURS 0 WITH HEADER LINE.
data: g_vbeln like smovbak-vbeln,
l_vbeln like smovbak-vbeln.
move BUSINESSPARTNER to loc_bp.
*delete line if middleware active.
*loc_bp = '0030000309'.
re_order_header_in-DOC_TYPE = 'TA'.
re_order_header_in-SALES_ORG = 'NL01'.
re_order_header_in-DISTR_CHAN = '02'.
re_order_header_in-DIVISION = '01'.
order_partners-partn_role = 'AG'.
order_partners-partn_numb = loc_bp.
append order_partners.
order_partners-partn_role = 'WE'.
order_partners-partn_numb = loc_bp.
append order_partners.
order_items_in-itm_number = '000010'.
order_items_in-MATERIAL = MATERIAL.
order_items_sched-itm_number = '00010'.
order_items_sched-req_qty = '1'.
append order_items_sched.
append order_items_in.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
DESTINATION 'zorder'
EXPORTING
ORDER_HEADER_IN = re_order_header_in
TESTRUN = ' '
importing
salesdocument = g_vbeln
TABLES
RETURN = re_return
ORDER_ITEMS_IN = order_items_in
ORDER_PARTNERS = order_partners
order_schedules_in = order_items_sched.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
DESTINATION 'zorder'
EXPORTING
WAIT = 'X'
IMPORTING
RETURN = wa_return.
Regards,
Shiva Kumar -
Problem of BOM components uploading through BAPI,for the Network(CN01)
Hello,Friends,
Iam PP consultant and facing a problem of BOM components uploading through BAPI,for creating of the Network (CN21)
we have 300 components in the network activity and while uploading the BOM through BAPI , only 295 components has been uploaded.Others components has not uploaded.
Please suggest me what will be the Problem? and
What is the solution for the same?
Regards,
MYSin customizing availability checked has been applied ,for this reason one additional screen is appearing in BAPI for all these components
How this screen could be by passed -
How to create network activity
how to create network activity using bapi_network_maintain bapi
i am getting the error as incorrect object key for activity
reagrdsok
-
BAPI for create meterial component
Hi experts
Which bapi can create meterial componet for an Activity, the same as use TCODE cj20n create a network->create activity->create meterial componet
BR
ChrisHi,
*& Report ZKAR_MATMAS_BAPI
*& This program demonstrates how easy it is to create Material master
*& data using BAPI_MATERIAL_SAVEDATA
*& The program also generates a report post-execution displaying errors
*& as well as successful uploads
REPORT ZKAR_MATMAS_BAPI.
* TABLES
* FLAGS *
DATA: F_STOP. " Flag used to stop processing
* DATA DECLARATIONS *
DATA : V_EMPTY TYPE I, " No. of empty records
V_TOTAL TYPE I. " Total no. of records.
* STRUCTURES & INTERNAL TABLES
*BAPI structures
DATA: BAPI_HEAD LIKE BAPIMATHEAD, " Header Segment with Control Information
BAPI_MAKT LIKE BAPI_MAKT, " Material Description
BAPI_MARA1 LIKE BAPI_MARA, " Client Data
BAPI_MARAX LIKE BAPI_MARAX, " Checkbox Structure for BAPI_MARA
BAPI_MARC1 LIKE BAPI_MARC, " Plant View
BAPI_MARCX LIKE BAPI_MARCX, " Checkbox Structure for BAPI_MARC
BAPI_MBEW1 LIKE BAPI_MBEW, " Accounting View
BAPI_MBEWX LIKE BAPI_MBEWX, " Checkbox Structure for BAPI_MBEW
BAPI_RETURN LIKE BAPIRET2. " Return Parameter
*--- Internal table to hold excel file data
DATA: IT_INTERN TYPE ALSMEX_TABLINE OCCURS 0 WITH HEADER LINE.
*--- Internal table to hold Matetrial descriptions
DATA: BEGIN OF IT_MAKT OCCURS 100.
INCLUDE STRUCTURE BAPI_MAKT.
DATA: END OF IT_MAKT.
*--- Internal to hold the records in the text file
DATA : BEGIN OF IT_DATA OCCURS 100,
WERKS(4), " Plant
MTART(4), " Material type
MATNR(18), " Material number
MATKL(9) , " Material group
MBRSH(1), " Industry sector
MEINS(3), " Base unit of measure
GEWEI(3), " Weight Unit
SPART(2), " Division
EKGRP(3), " Purchasing group
VPRSV(1), " Price control indicator
STPRS(12), " Standard price
PEINH(3), " Price unit
SPRAS(2), " Language key
MAKTX(40), " Material description
END OF IT_DATA.
* SELECTION SCREEN. *
SELECTION-SCREEN BEGIN OF BLOCK SCR1 WITH FRAME TITLE TEXT-111.
PARAMETER : P_FILE TYPE RLGRAP-FILENAME OBLIGATORY DEFAULT " Input File
'C:\Material_master.XLS'.
PARAMETER : P_MAX(4) OBLIGATORY DEFAULT '100'. " no.of recs in a session
PARAMETERS: P_HEADER TYPE I DEFAULT 0. " Header Lines
PARAMETERS: P_BEGCOL TYPE I DEFAULT 1 NO-DISPLAY,
P_BEGROW TYPE I DEFAULT 1 NO-DISPLAY,
P_ENDCOL TYPE I DEFAULT 100 NO-DISPLAY,
P_ENDROW TYPE I DEFAULT 32000 NO-DISPLAY.
SELECTION-SCREEN END OF BLOCK SCR1.
* AT SELECTION-SCREEN *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
*--- Validating file
PERFORM VALIDATE_FILE USING P_FILE.
* START-OF-SELECTION
START-OF-SELECTION.
*--- Perform to convert the Excel data into an internal table
PERFORM CONVERT_XLS_ITAB.
IF NOT IT_DATA[] IS INITIAL.
*--- Perform to delete Header lines
PERFORM DELETE_HEADER_EMPTY_RECS.
ENDIF.
* END OF SELECTION. *
END-OF-SELECTION.
*--- Perform to upload Material Master data
PERFORM UPLOAD_MATMAS.
* Form : validate_input_file
* Description : To provide F4 help for file if read from PC
FORM VALIDATE_FILE USING F_FILE TYPE RLGRAP-FILENAME.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
CHANGING
FILE_NAME = F_FILE
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE S010(ZLKPL_MSGCLASS). " 'Error in getting filename'.
ENDIF.
ENDFORM. " validate_input_file
*& Form CONVER_XLS_ITAB
* text
FORM CONVERT_XLS_ITAB.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
FILENAME = P_FILE
I_BEGIN_COL = P_BEGCOL
I_BEGIN_ROW = P_BEGROW
I_END_COL = P_ENDCOL
I_END_ROW = P_ENDROW
TABLES
INTERN = IT_INTERN.
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*--- Perform to move the data into an internal data
PERFORM MOVE_DATA.
ENDFORM. " CONVERT_XLS_ITAB
*& Form MOVE_DATA
* text
FORM MOVE_DATA.
DATA : LV_INDEX TYPE I.
FIELD-SYMBOLS <FS>.
*--- Sorting the internal table
SORT IT_INTERN BY ROW COL.
CLEAR IT_INTERN.
LOOP AT IT_INTERN.
MOVE IT_INTERN-COL TO LV_INDEX.
*--- Assigning the each record to an internal table row
ASSIGN COMPONENT LV_INDEX OF STRUCTURE IT_DATA TO <FS>.
*--- Asigning the field value to a field symbol
MOVE IT_INTERN-VALUE TO <FS>.
AT END OF ROW.
APPEND IT_DATA.
CLEAR IT_DATA.
ENDAT.
ENDLOOP.
ENDFORM. " MOVE_DATA
*& Form DELETE_HEADER_EMPTY_RECS
* To delete the Header and empty records
FORM DELETE_HEADER_EMPTY_RECS.
DATA: LV_TABIX LIKE SY-TABIX.
IF NOT P_HEADER IS INITIAL.
LOOP AT IT_DATA.
IF P_HEADER > 0 AND NOT IT_DATA IS INITIAL.
DELETE IT_DATA FROM 1 TO P_HEADER.
* P_HEADER = 0.
EXIT.
ENDIF.
ENDLOOP.
ENDIF.
CLEAR IT_DATA.
*--- To delete the empty lines from internal table
LOOP AT IT_DATA.
LV_TABIX = SY-TABIX.
IF IT_DATA IS INITIAL.
V_EMPTY = V_EMPTY + 1.
DELETE IT_DATA INDEX LV_TABIX..
ENDIF.
ENDLOOP.
CLEAR IT_DATA.
*--- Total no of recs in file
DESCRIBE TABLE IT_DATA LINES V_TOTAL.
IF V_TOTAL = 0.
MESSAGE I013(ZLKPL_MSGCLASS). " No records in the file
F_STOP = 'X'.
STOP.
ENDIF.
ENDFORM. " DELETE_HEADER_EMPTY_RECS
*& Form UPLOAD_MATMAS
* to upload Material Master data
FORM UPLOAD_MATMAS .
LOOP AT IT_DATA.
* Header
UNPACK IT_DATA-MATNR TO IT_DATA-MATNR.
BAPI_HEAD-MATERIAL = IT_DATA-MATNR.
BAPI_HEAD-IND_SECTOR = IT_DATA-MBRSH.
BAPI_HEAD-MATL_TYPE = IT_DATA-MTART.
BAPI_HEAD-BASIC_VIEW = 'X'.
BAPI_HEAD-PURCHASE_VIEW = 'X'.
BAPI_HEAD-ACCOUNT_VIEW = 'X'.
* Material Description
REFRESH IT_MAKT.
IT_MAKT-LANGU = IT_DATA-SPRAS.
IT_MAKT-MATL_DESC = IT_DATA-MAKTX.
APPEND IT_MAKT.
* Client Data - Basic
BAPI_MARA1-MATL_GROUP = IT_DATA-MATKL.
BAPI_MARA1-BASE_UOM = IT_DATA-MEINS.
BAPI_MARA1-UNIT_OF_WT = IT_DATA-GEWEI.
BAPI_MARA1-DIVISION = IT_DATA-SPART.
BAPI_MARAX-MATL_GROUP = 'X'.
BAPI_MARAX-BASE_UOM = 'X'.
BAPI_MARAX-UNIT_OF_WT = 'X'.
BAPI_MARAX-DIVISION = 'X'.
* Plant - Purchasing
BAPI_MARC1-PLANT = IT_DATA-WERKS.
BAPI_MARC1-PUR_GROUP = IT_DATA-EKGRP.
BAPI_MARCX-PLANT = IT_DATA-WERKS.
BAPI_MARCX-PUR_GROUP = 'X'.
* Accounting
BAPI_MBEW1-VAL_AREA = IT_DATA-WERKS.
BAPI_MBEW1-PRICE_CTRL = IT_DATA-VPRSV.
BAPI_MBEW1-STD_PRICE = IT_DATA-STPRS.
BAPI_MBEW1-PRICE_UNIT = IT_DATA-PEINH.
BAPI_MBEWX-VAL_AREA = IT_DATA-WERKS.
BAPI_MBEWX-PRICE_CTRL = 'X'.
BAPI_MBEWX-STD_PRICE = 'X'.
BAPI_MBEWX-PRICE_UNIT = 'X'.
*--- BAPI to create material
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
HEADDATA = BAPI_HEAD
CLIENTDATA = BAPI_MARA1
CLIENTDATAX = BAPI_MARAX
PLANTDATA = BAPI_MARC1
PLANTDATAX = BAPI_MARCX
* FORECASTPARAMETERS =
* FORECASTPARAMETERSX =
* PLANNINGDATA =
* PLANNINGDATAX =
* STORAGELOCATIONDATA =
* STORAGELOCATIONDATAX =
* VALUATIONDATA = BAPI_MBEW1
* VALUATIONDATAX = BAPI_MBEWX
* WAREHOUSENUMBERDATA =
* WAREHOUSENUMBERDATAX =
* SALESDATA = BAPI_MVKE1
* SALESDATAX = BAPI_MVKEX
* STORAGETYPEDATA =
* STORAGETYPEDATAX =
IMPORTING
RETURN = BAPI_RETURN
TABLES
MATERIALDESCRIPTION = IT_MAKT
* UNITSOFMEASURE =
* UNITSOFMEASUREX =
* INTERNATIONALARTNOS =
* MATERIALLONGTEXT =
* TAXCLASSIFICATIONS =
* RETURNMESSAGES =
* PRTDATA =
* PRTDATAX =
* EXTENSIONIN =
* EXTENSIONINX =
IF BAPI_RETURN-TYPE = 'E'.
WRITE:/ 'Error:' ,BAPI_RETURN-MESSAGE ,'for material:' ,IT_DATA-MATNR.
ELSEIF BAPI_RETURN-TYPE = 'S'.
WRITE: 'Successfully created material' ,IT_DATA-MATNR.
ENDIF.
ENDLOOP.
ENDFORM. " UPLOAD_MATMAS
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Apr 11, 2008 5:49 PM -
Created Network and Internet Sharing Problems
Hello,
I created network with WEP password. I proceeded to turn on internet sharing.
All works great until the iMac goes to sleep.
Once it comes back on the network I created is missing and I have create it all over again.
The internet connection is through ethernet staring into the iMac.
Is there a way to get the iMac to stop forgetting the created network and leave the internet connection on? Even when it's sleeping.
Thanks in advance.Hi there,
Is there a reason why you chose WEP? I ask because WEP is an encryption technology that has been cracked so if possible I"d suggest you use WPA or WPA2 encryption instead. Am I correct to assume you don't have a router and all the other computers connect to the internet through the imac? If you don't have a router I'd suggest you buy one, they are not much money and provide excellent protecton from the internet. A router will protect all the computers on your network behind its firewall and would no longer have to connect through the imac.
A couple of things to check:
Go to System Preferences>Network and highlight 'Wireless' on the left side. (Also, if you don't use Bluetooth or any other type of networking listed there delete them from the list leaving only Ethernet and Airport) Uncheck 'ask to join new networks'.
Then click on 'Advanced..' and under the Airport tab make sure only your network is listed in the 'Prefered Networks' window. Under that window check 'remember any network this computer has joined' and uncheck 'disconnect from wireless networks when logging out'.
That's the way I've got my computer set up and I've never lost a connection.
Message was edited by: pogster -
Hi All,
I would like to use the BAPI to create the IR and GR.
But i don't know which BAPI is use for create the IR and GR . Could you mind give any information about this?
Regards,
LukeHi Luke,
The function module "BAPI_GOODSMVT_CREATE " would perform the task. Please refer to the following link.
http://www.sap-img.com/abap/bapi-goodsmvt-create-to-post-goods-movement.htm
Regards. -
BAPI to create Excise Invoice and Commercial Invoice
Hi All,
Can u tell me the BAPI for creating Excise and Commercial Invoice.
Moderator message: please do some research before asking.
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Mar 2, 2011 5:56 PMHi,
You can make the appropriate setting in Customizing for Excise Duty, by choosing Basic Settings -> Maintain Excise Groups, and selecting Create EI (Create Excise Invoice Automatically)
Also maintain the default excise and series group in the configuration.
Logistics general>Tax on Goods Movement>India>Basic Settings>Maintain Excise groups. For your Excise group maintain the check Excise invoice during Billing.
After maintaining the same also maintain the default values in Logistics general>Tax on Goods Movement>India>Business transactions>Outgoing Excise invoices-->Maintain Default Excise groups and Series groups.
Regards, -
BAPI to create Scheduling Agreement of VA31
Dear gurus,
I need to find the BAPI or Function Module to create Scheduling Agreement of VA31 from the uploaded data. I know that I can use BAPI_SALESORDER_CREATEFROMDAT2 to create the sales order of VA01. Can I use the same bapi to create the scheduling agreement of VA31? Both of the screens seems to look quite the same but their order types are different. Any suggestion on this?
Thank you for your help. Have a nice day.
Best Regards,
HedyHi,
FM
BAPI_CUSTSCHEDULAGREE_CONFDELV
Functionality
You can use this method to make a delivery confirmation in the SD scheduling agreement
Example
1. Generating delivery for a scheduling agreement item.
2. Changing a delivery item.
3. Posting of goods issue for delivery.
4. Deleting a delivery item or a delivery.
Regards,
Venkatesh -
BAPI for creating scheduling agreement with reference to Contract agreement
Hi All ,
Can anyone please suggest if there is any BAPI for creating scheduling agreement with reference to the contract agreement number.
Thanks for your help.
VadivukkarasiHi,
Check this BAPI <b>BAPI_AGREEMENT_MAINTAIN.</b>
check these
BAPI_CUSTSCHEDULAGREE_CONFDELV Customer Sched. Agreement: Confirmation of Delivery; Document Flow Upd
BAPI_SALES_DEL_SCHEDULE_CREATE BAPI for creation of releases in scheduling agreements
Regards -
BAPI for Creating a PM order(iw34) with reference to a Notification
Hi All,
Could anyone help to find the BAPI for creating a PM order with reference to a notification Number.
I will explain my requirement :
I want to create a notification from an external Application where i got the BAPI BAPI_ALM_NOTIF_CREATE and keeping this created notification number as Referece or for this notification number i need a create a PM order.Usually this process in done transaction IW34 in R/3.
But with the BAPI BAPI_ALM_ORDER_MAINTAIN i can create a PM order but this BAPI doesn't have a input parameter "Notification number ".So i can't use this BAPI.
Could any suggest for a BAPI where i can create a PM order with reference to a Notification Number.
Regards,
SidHi,
I have tried with the FM CO_IH_ORDER_GENER_2 but when i executes it gives a error message
"<i>Service/maintenance order type PM02 not completely maintained in plant
Message no. IW216
Diagnosis
For the selected order type and plant, no check control is maintained in Plant Maintenance/Service in 'Availability Check for Materials, PRTs and Capacities'.
Procedure
A check control must be maintained for this combination of order type and plant</i>"".
And even have a doubt what to enter in this input parameter "GEWRK_OBJTYP" .
Kindly help me to solve this issue.
Regards,
Sid -
BAPI to create SNP planned order based on start date
Hi,
I am looking for a BAPI to create SNP planned order based on the order start date. There is BAPI BAPI_MOSRVAPS_CREATESNPORDER which can be used to create SNP planned order based on the end date but not based on the start date.
Also would be great if some one can share how do they create SNP Planned orders using BAPI BAPI_MOSRVAPS_CREATESNPORDER in case if GR processing time is defined in the product master and workdays for GR to be respected according to the calendar.
Regards,
VenkatHello Mr.Venkat,
Hope you recognize me.
Please check out the BAdi below.
BAdi - APO_BAPI_BUS10503 (this is the BAdi for ManufactOrderAPS BAPI which contains the SNPorder BAPI)
Method - CHANGE_SAVEMULTIPLE2
In this method parameter IT_ORDER_HEAD contains Order start date input option.
For GR time please check this (not sure if it will help).
Same BAdi/ same method
Parameter IV_PLANNING_MODE_USAGE contains field PLANNING_MODE.
Value 1 for PLANNING_MODE corresponds to "Observance of parameters from the product master".
This may make it respect the GR time in product master
Good luck with the above
Regards,
Ashok -
Problem using BAPI to create Service Confirmation in CRM
Good afternoon all.
I have raised this is CRM forum too, just thought it best to ask the broader ABAP community the question too.
We are encountering a problem using a BAPI to create a transaction in CRM, specifically:
I am trying to create a Service Confirmation (BUS2000117) in a CRM system using the BAPI BAPI_BUSPROCESSND_CREATEMULTI.
The BAPI succeeds in creating the header of the transaction, but I cannot make the BAPI create any other data in the transaction such as partners or items.
Just want to be sure that I am not being foolish...has anyone succeeded in using this BAPI to create an error-free Service Confirmation?
Regards
NickI am going to pop this thread into General ABAP forum too.
Nick -
Need RFC/BAPI to create Delivery Order with respect to Sales Order
Hi Gurus ,I'm new to AB AP Language to be working in company
so can anyone tel me FM/BAPI to create Delivery order with respect to sales order(va01,vl01n)
Any sugg.. will appreciate u.........
Thanks in Advance...........Hi,
Try this BAPI
BAPI_SALESORDER_CONFIRMDELVRY
Regards
Bala Krishna
Maybe you are looking for
-
Hello Gurus: I am having a server crash problem. OBIEE server crashes around afternoon almost everyday. error is "An error occurred contacting Oracle BI Presentation Services. If this problem persists, contact your ssytem admin. Error Codes: GDO7WNZA
-
Hi V r in BBP. SAP recommend Semi Finish & Finish goods stocks on Standard Price, my client need to following; 1. Produt wise profitability (note COPA is not in the scope) 2. Outlet wise profitability 3. Customer wise profitability 2. Inventory valu
-
How to hide WebI report in infoview
Hi, I have created a sub-report which opens when user clicks on hyperlink in main report. To get it to work, I uploaded both reports to Infoview. Now both of the reports are showing so a user could potential run the sub-report first which I don't wan
-
ORA-02289 (10: 10): PL/SQL: ORA-02289: sequence does not exist
Hi, I want to run a trigger on SCOTT account.But wheni try to run it.I am getting ' ORA-02289 (10: 10): PL/SQL: ORA-02289: sequence does not exist'.PLease help out
-
[SOLVED] Huge tray icons in KDE
Until the other day, my tray icons looked like this (good): http://i.imgur.com/o0v5hVd.png Now, it looks like this (bad): http://i.imgur.com/FD77IWF.png I tried downgrading some kde packages, but couldn't find the one responsible for the change. Has