Upload SAles order with 5 Charcteristics for Configurable materisl

Scenario
1.We are workign with configurable material
2.There are 5 characters which pops during the sales order creation.
Issue.
We are trygint to develop a upload program with Lsmw , let us know if anyone have come across such scneario and how it was addressed.
thanks in advance.

i made a recording and tried running it and worked fine..

Similar Messages

Create EDI sales order with reason for rejection set for item

Hello all,
I'm trying create an EDI sales order with item rejected, but I get the following error: Item 000001's configuration can no longer be changed.
I set the reason for rejection in the segment E1EDP01, field ABGRU.
How can create the sales order, with item rejected without error?

Use program SDJEDI to simulate the error (see note 380603)
This way you can figure out whether the same issue exists in VA01 or just in the SD EDI process
From reading the issue, it seems you have a configurable item and the line is not open for input and that's why your reason for rejection is ignored.
But SDJEDI should tell you everything.
Run it first to see the BDCDATA your idoc produces.
Then run it again in simulate mode and it should take you very close to the error
Hope this helps
Paul

Create a Sales Order with Reference to Contract using IDoc / LSMW ( AFS )

Hi Gurus,
I need to crate a Sales Order with reference to a Contract. I need to upload Sales Orders with reference to contract via LSMW.
So far, I've been able to create the Sales Order with ref to contract. But, the Sales Order Quantity is not getting deducted from the Original Qty in Referred Contract ( When try to create another Sales Order referring to the same Contract.) When a Sales Order is created manually, this is working fine.
Please tell me if I've missed some parameter which stopping it create the link to exact schedule line ( Sizes level )
The Details of the IDoc which is been created via LSMW are as follows;
Message Type: ORDERS
Basic Type     : /AFS/ORDERS05
Process Code : ORDE / DELO
( Tried with both process codes. But the Identification is the same for both: IDOC_INPUT_ORDERS )
*_In Header;_
Segment : E1EDK02 - IDoc: Document header reference data *
Qualifier : '043' - Vendor Contract Number ( Tried with ' 005' - Customer Contract, but it's not working )
Contract Order is mapped for field BELNR
*_In Item;_
Segment : E1EDP02 - IDoc: Document Item Reference Data *
Qualifier : '043' - Vendor Contract Number ( Tried with ' 005' - Customer Contract, but it's not working )
Contract Order is mapped to field BELNR
Line Item of the Contract is mapped to field ZEILE
I also tried passing the Schedule line of Contract in Segment : E1J3P01 AFS IDoc: Doc.item general data
to following fields;
J_3AETENV
J_3AVGETE
/AFS/UETENR
Still its not getting updated in the VBEP also..
Please help me with regard to this. Points will be awarded for your valuable contribution.
Thanks.

Hi,
This issue is been resolved.
One of my friend helped me with resolving this issue..
Once the below mentioned configurations were done on SPRO, the Sales Order was created with reference to Contract and the Qty was reflected when tried to create a new Order referring the same contract.;
u2022     SPRO --> SD -->Sales --> Sales Documents --> Sales Document Header --> Define Sales Document Types --> Field : Outline agreement message; from blank to u201CBu201D.
u2022     SPRO -->SD -->Sales --> Sales Documents --> Sales Document Header --> Maintain Sales Document Types for AFS --> Field : Outline agreement message; from blank to u201CAu201D

BAPI_SALESORDER_CREATEFROMDAT2 for creating sales orders with configurable

Hi All,
I want to create sales order with a material which in turn triggers a configurable network order.
I am using the following BAPI : BAPI_SALESORDER_CREATEFROMDAT2.
After reading the "[Variant Configuration (LO-VC)|http://help.sap.com/printdocu/core/print46c/en/data/pdf/lovc/lovc.pdf]" documentation, I thought I had to populate the
following tables ORDER_CFGS_REF, ORDER_CFGS_INST and ORDER_CFGS_VALUE.
The call function return no errors and the sale order is well created. However, I have no values in the network.
If I created a sale order in VA01, a network is created with value. So the customizing is good.
Do you have any idea how to populate this tables ? Sample code will be very helpful.
We found in this forum a lot of sample code about configurable material, with obj_type populate with MARAu2019. But no example with configurable network.
Actually I complete these tables like this :
" E1CUCFG
ls_order_cfgs_ref-posex = '000010'.
* ls_order_cfgs_ref-config_id = '000010'.
ls_order_cfgs_ref-config_id = '000001'.
ls_order_cfgs_ref-root_id = '00000001'.
ls_order_cfgs_ref-complete = 'T'.
ls_order_cfgs_ref-consistent = 'T'.
* ls_order_cfgs_ref-cbase_id = '4ECADFC4BE9F03A6E10080000AC4AB76'.
* ls_order_cfgs_ref-cbase_id_type = 'G'.
APPEND ls_order_cfgs_ref TO lt_order_cfgs_ref.
" E1CUINS
ls_order_cfgs_inst-config_id = '000001'.
ls_order_cfgs_inst-inst_id = '00000001'.
ls_order_cfgs_inst-obj_type = 'PLKONET'. u201C(in replacement of MARA)
ls_order_cfgs_inst-class_type = '300'. u201C(or 020).
ls_order_cfgs_inst-obj_key = '01000000801'.
APPEND ls_order_cfgs_inst TO lt_order_cfgs_inst.
" E1CUVAL
ls_order_cfgs_value-config_id = '000001'.
ls_order_cfgs_value-inst_id = '00000001'.
ls_order_cfgs_value-charc = 'XXXX'. u201C(corresponding to Flag DTA)
ls_order_cfgs_value-charc_txt = 'Flag DTA'.
ls_order_cfgs_value-value = '0'.
APPEND ls_order_cfgs_value TO lt_order_cfgs_value.
Thanks,

Have a look to OSS-Message 567348. There is sample coding for using BAPI_SALESORDER_CHANGE, but the parameters should be the same to yout BAPI
Best regards
Torsten Manhardt

How to create sales order with configuration?

Hi, all!
I'm trying to create sales order with multi-level BOM's explosion using BAPI_SALESORDER_CREATEFROMDAT2, but with no success.
Scanning and following ton's of OSS notes and already posted answers in this forum regarding configuration in sales order doesn't lead to success to.
So can anybody throw light on rules for populating data structures for items and items configuration in case of multi-level BOM's explosion in sales order? Providing working code snippet would be great.
Regards,
Maxim.

Hi, all!
Just want to properly close the thread and share experience gained.
The main reason of error was in incorrect TABLES parameters populating for sales order items and their configuration.
Not the secret that there is a lack of documentation for even BAPIs FM, especially for comprehensive things to do. And it seems that the right way to resolve proper structure of import/tables parameters for "creation/change" function modules is to call "corresponding read-FM" for object created on-line and see how return parameters are populated.
For example, for BAPI_SALESORDER_CREATEFROMDAT2 such corresponding FM is BAPISDORDER_GETDETAILEDLIST, which returns near the same structures.
Actually in my case such algorithm was used in the first place. But BAPISDORDER_GETDETAILEDLIST returned wrong parameters as was discovered later This error was fixed by implementing OSS note 821191 and sales order was succesfully created.
And I want to thank SAP Support experts in effective assistance. 10 points are yours!
Regards,
Maxim.

LSMW program to upload the sales order with multiple line items.

Dear SD and PP Gurus,
I am new to creating LSMW Program.
I want to create a LSMW program to upload the sales order with multiple line items. I have read on SDN that it can be done on two phases. First Create Header Data than line items. IS IT TRUE??, Or
Is there any procedure by which we can load the sales orders with multiple line items in a single run (part).
I want to use Batch process, not a BAPI or IDOC procedure.
I have created a program with
object 0090
Method 0000
Program Name RVINVB10
Program Type D
Source Structure 1 - For Header and Source Structure 2 for Line Items.
Mapped Field INDET (With Fix Value 1), ORDERTYPE, SALESORG, DISTCHANNEL, DIVISION, CUSTOMER, PONUMBER , DELVDATE, PRCGDATE, PMTTERM
INCOT1 INCOT2 with Source Structure - 1 and
Field INDENT (With Fix Value 2), ITEMNO, MATCODE, MATQTY, SUOM, PLANT, BATCH, AMOUNT with Structure-2
than maintained Structure relation ship, field Mapping, Specified Files, Assigned files, Read Data and other process,
At final stage (Start Direct Input program RVINVB10) it is giving a message - Table name not allowed.
Please tell me where I am wrong.
Thanks in advance.
DSC

Dear SD Gurus n Experts,
I have solved the above problem. But there is another problem appearing regarding the date format. Now system generating a message: Date . . is not valid.
While I am using Date: YYYYMMDD format in flat file, which is SAP's Standard Format.
In SDN Link: LSMW upload Sales Order using VA01/VA02 I have found that there are some date fields which are mandatory to filled. Here I have mapped
VDATU - Requested delivery date, BSTDK - Customer purchase order date, PRSDT - Date for pricing and exchange rate, BSTDK_E - Ship-to party's PO date, FKDAT - Billing Date, KORDT - Delivery Date,
and PRGRS - Date type is Constant = D
Can any one tell me, where is the priblem.
With thanks,
DSC

BAPI For CREATE SALES ORDER WITH REFERENCE TO ORDER

Hi ,
I want to develop a new RFC for 'Creating Sales Order' with reference to another sales order -
Is there any BAPI available for the same ? (Version 4.7) - I know its available for new create and change
but couldn't find for create with reference to Order ...
Thanks in advance ...
Regards
Rajesh.

Hi,
You can use this FM "/SAPNEA/SMAPI_ORDER_CREATE". I haven;t tried this but you can still give it a try. Mention the Reference Order Type and other data in the header work area and pass it to the FM.
Reward if it's useful.
Thanks,
Anil

BAPI FOR CREATING SALES ORDER WITH REFFERENCE TO QUOTATION

Hi All,
I am creating sales order with refference to quotation by using bapi "BAPI_SALESORDER_CREATEFROMDATA".Able to create sales order but its not refferencing qutation.Is there any other bapi for this scenario.Please guide me.
Regards,
Suresh

Hi ,
Thank you for giving reply I tried by using bapi BAPI_SALESORDER_CREATEFROMDAT2 after execution it giving sales order number but when I am trying to see that sales order system is giving error message as document is not exist.
Please guide me.
Suresh

BAPI For Create Goods Issue for Sales order with picked quantity

Hi friends,
Is there any BAPI available to create Goods issue For sales order with picked quantity...............?
we hv used BAPI_OUTB_DELIVERY_CREATE_SLS
with sales order .......its creating delivery order but not doing goods issue with piked quantity........

pls,reply its argent

How settlement rule will be created for Sales order with cost object

Dear Experts,
We are using product cost by sales order with valuated stock. In addition we are not using COPA
We also consume some materials at sales order level and at the end of month we want to do the result analysis and settlement for the same amount. In this case can any on explain how system will behave regarding settlement of sales order cost and what entries will get pass in the system.
In our case we have done below activities...
we have created sales order,
All production order activities completed till final GRN including month end activities
Material consumption against sales order
Result analysis executed
At the time of sales order settlement, system throwing error (Sender doesn't have valid receiver, please create settlement rule for sender object)
Then i checked in sales order there sales order settlement rule not defined.
I guess this settlement rule need be generated by system automatically. If not, please let me know the process of it.

HI kishore
the reason is that sale order always carry the revenue and production order and production period carry the cost .
cost you can settle to the Material and even management want to be settle the cost to material only in production order OR period
but in sales order when u sell the product it carry the revenue not the cost and management want see and analysis based on profitability segment are profit center level .
Prerequisites
If CO-PA is active, the system generates a settlement rule when you create the sales order. The settlement rule determines whether data is settled to other objects or other areas in Controlling. In accordance with this settlement rule, the relevant data is settled to CO-PA.
If CO-PA is not active, create a settlement rule. This settlement rule that you create manually normally contains a G/L account as a receiver (such as 399999). You can also settle costs and revenues or results analysis data to objects with revenue.
You can also settle the cost of sales calculated in results analysis to a fixed asset or a cost center. To do this, you must add to the allocation structure the results analysis cost elements under which the cost of sales is updated to the order.
The settlement rule includes a distribution rule for the sales order item. The distribution rule is made up of a settlement receiver, a settlement share, and a settlement type:
The settlement receiver (such as profitability segment or G/L account) specifies the object to which the actual costs and revenue of the sales order item are settled. The settlement receiver can be proposed through the settlement profile.
The settlement share defines the percentage or the equivalence numbers used to distribute the costs to the individual settlement receivers. The settlement share for sales order items is usually 100%. A settlement share of 100% is preset in the system.
The settlement type specifies full settlement of the sales order item. This ensures that all the data on the sales order is available for results analysis.
Settlement still takes place in each period. The revenues and the cost of sales are transferred to CO-PA by period, and the work in process and the reserves are transferred to FI.

Table name for sales order with Customer info

Hi Gurus,
Could you please provide me table name for sales order with customer no and customer name.
I have list of sales order number (more than 1000 no's ) i need to identify customer number and customer name (ship to party and sold to party information). I am running this report every week. so i plan to create sqvi for this report.
Thanks and regards,
B.Deethya.

Hello,
Access Tables VBAK & VBAP.
From the above tables you will get Solt to Party & Ship to Party Codes.
For Customer names you have to pass the Customer Codes to Table - KNA1
Hope this clarifies.
Thanks,
Jignesh Mehta

DIServer insert operations for sales orders with error

DIServer insert operations for sales orders with
That even though the insert is inserted DocDueDate DocDueDate it says error.
Subtracting the value of the format 'yyyy-mm-dd', 'yyyy/mm/dd', 'mm-dd-yyyy', 'mm/dd/yyyy' put all reporting
When the input is entered DocDueDate ShipDate also put together ... but I get an error.
The error message 'env: Receiver-10Enter due date [ORDR.DocDueDate] 171AddObject2EEE7D98-AB71-464A-93AB-933F0AD3D4DC'
Purchase order entered into the normal value because the xml is missing or wrong with you.
Please answer all the possibilities that can be resolved
This Xml used.
"<BOM>" +
"<BO>" +
"<AdmInfo>" +
"<Object>oOrders</Object>" +
"</AdmInfo>" +
"<QueryParams>" +
"<DocEntry />" +
"</QueryParams>" +
"<Documents>" +
        "<row>" +
        "<DocType>I</DocType>" +
        "<DocDate>2012-01-11</DocDate>" +
        "<DocDueDate>2012-01-11</DocDueDate>" +
        "<CardCode>CD00001</CardCode>" +
        "<Address>Anymode</Address>" +
        "<DocCurrency>KRW</DocCurrency>" +
        "<Comments>[sales orders] LGU TEST</Comments>" +
        "<TaxDate>2012-01-11</TaxDate>" +
        "<JournalMemo>JournalMemo</JournalMemo>" +
        "<Address2>Addr</Address2>" +
        "<BPL_IDAssignedToInvoice>1</BPL_IDAssignedToInvoice>" +
        "</row>" +
"</Documents>" +
"<Document_Lines>" +
        "<row>" +
        "<ItemCode>ACDT0100ET</ItemCode>" +
        "<Quantity>1</Quantity>" +
        "<Price>5000</Price>" +
        "<DiscountPercent>10</DiscountPercent>" +
        "<WarehouseCode>A100</WarehouseCode>" +
        "<VatGroup>A2</VatGroup>" +
        "</row>" +
"</Document_Lines>" +
"</BO>" +
"</BOM>";

I had the same error change the Date to the format yyyymmdd, and problem solved.

BAPI/FM in ECC to create a sales order with variant configurable material

Hi all,
I need to create a function module that creates a sales order in ECC with a variant configurable material.
can some one tell me if there is a in built function module or BAPI that i can make use of to create a sales order with variant configurable material in ECC.
Regards,
Jessica Sam

Thanks MxG,
I dont know how to use this BAPI. .Can you suggest me a sample code.
My reqmnt is, i have
Sold to party, ship to party, bill to party , VC config material and all char values that should be populated while creating a sales order.
please help me with what values should i populate in i/p paramters and and how to use this BAPI with some sample code if posible.
Regards,
Jessica.

Sales Order with Variant Configuration

I´m trying to create a Sales Order with Variant Configuration.
First, I tried to create the order with the BAPI SD_SALESDOCUMENT_CREATE but It would not let me update characteristics.
Then I separated into two BAPI's:
SD_SALESDOCUMENT_CREATE to create Sales Order and BAPI_SALESORDER_CHANGE to modify the characteristics.
I run the two SAP BAPI's from SAP and create the Sales Order and make the characteristics correctly, but when I try to invoke from The Middleware the message V1 555 The sales document is not yeat complete is displayed and does not update the characteristics.
Both functions are such as Remote-enabled Module.
The remote user profile is SAP ALL
Reviewing where the message is used, I see that the message is in the include MV45AF0B_BELEG_BEARBEITEN_ENDE
IF DA_LINES> 0 AND
SY-NE SPACE AND BINPT
CTU_AMODUS BI_INFO-NA 'A' AND
CATTAKTIV IS INITIAL.
MESSAGE I555.
ENDIF.
Do you have any idea why since Middleware is not working?.
Best Regards.
Blanca Segovia.

Hi Diwakar
I changed the creation of Sales Order using only SD_SALESDOCUMENT_CREATE and using Commit Work and it is the same, running the function from se37 create the Sales Order and make the characteristics correctly, but when I try to invoke from The Middleware the message V1 555 The sales document is not yeat complete is displayed and does not update the characteristics.
I Open that Sales order in VA02 and check 'Incompletion Log' the screen show 1 Configuration, I Open the tab of the characteristics without changing the characteristics and only save, then the status changes to Complete document.
You give me another idea that could be happening?
Thank you very much.
Blanca Segovia.

Table for sales order with incoterms

Hi all,
In which table can i get sales orders with incoterms details.
In VBAK and VBAP it is not available
Regards'
Mano

> In which table can i get sales orders with incoterms details.
>
> In VBAK and VBAP it is not available
Hi,
Go to SE16, and type the table name as VBKD. This is the table where all the inco term details are given.
In the new screen, against VBELN, give the sales document numbers for which you want the inco term details and then click on execute.
You will get the info you require.
Hope you find it useful.
Regards,
Swapna

Upload SAles order with 5 Charcteristics for Configurable materisl

Similar Messages

Maybe you are looking for