Uploading a directory (not file)

folks... i have one question. Is it possible to upload a directory (that has other directories, files in it) using RMI. Right now i am able to upload one single file as
public void upload(String fileName, byte[] buffer);
what i am doing is i get file name, i create a file with that name and write the byte buffer[] in it.
But i am wondering how can i upload a whole file? any ideas

zip it first and send it. Have you ever been able to upload or download folders? That's not how file systems work....

Similar Messages

How to upload entire Directory / Multiple Files

Dear Friends,
I am trying to design a very user friendly servlet page for uploading multiple files from a PC to Unix server. I need some suggestion on what java library or ftp client to use for this.
Details:
There are about 8 files to upload (sized ranging from 200kb to 60MB, The files are a mix of binary and ascii data). I don't want the user to have to click on the browse form button on the webpage 8 times to select the files. In fact all of the files will reside in a directory with a barcode as the name.
I would like to have the user simply select the directory and submit the form. I will then have a parser that is automatically invoked to parse these files, verify the formats and use the data to populate the next page that is shown to the user for data confirmation.
The hardest part for me is figuring out what tool to use for the upload section. Any suggestion on what tool (FTP client library, etc.) would be highly appreciated.
In the forum I found lots of examples for uploading single files but none for uploading entire directory or just multiple files. Am I asking the wrong question? Are there any example out there that I can look?
I do not favor using a full blown ftp tool on the side because I think it increases the chance for user errors. (miss selecting a file, wrong directory, ascii vs binary).
Thanks,
Wayne Chen
[email protected]

There are two ways to upload multiple files:
1. Package them all into a zip file on the client, upload that file, unpackage them on the server.
2. Upload one file at a time.
If you're asking about servlets then you can't do number 1 because you can't access the files on the client. And you've said you don't want to have the client upload the files one at a time. From this it follows that you need some logic on the client that can either zip and upload the files, or upload the files one at a time, without requiring user intervention. The Java form of client-side logic from a website is an applet. In this case you would have to sign the applet, since an applet can't access the client's file system without the client's permission.

UPLOAD A DIRECTORY WITH N NUMBER OF DATA FILE

Hi Experts
                           In my scenario i need to upload a directory with n number of excel file from my presentation server to application server . Please do help on that (note : directory with many file not an single file )

Hi,
Here is the Code for List of Files from the Specific Directory to Application Server(SAP)..
REPORT ZDIRFILES    .
PARAMETER: p_fdir            type pfeflnamel DEFAULT '/usr/sap/tmp'.
data: begin of it_filedir occurs 10.
        include structure salfldir.
data: end of it_filedir.
*START-OF-SELECTION
START-OF-SELECTION.
Get Current Directory Listing for OUT Dir
call function 'RZL_READ_DIR_LOCAL'
       exporting
            name     = p_fdir
       tables
            file_tbl = it_filedir.
List of files are contained within table it_filedir
loop at it_filedir.
    write: / it_filedir-NAME.
endloop.
Girish

ZCM 11.2.3a Image upload error [directory does not exist]

We are uploading a number of images to the server.
A lot of these are large images and the workstation has been build as a VMWare workstation.
So far with the exception of one, all have uploaded successfully.
One image is failing to upload when it is about halfway through. The error displayed on the workstation says "Directory not found"
Looking at the novell-pbserv.log I see the following error message related to the image upload.
RWCC unknown compression command code: 0x4000000 (67108864)
RIP2 RWCC faiolure 3, 1851,
Any help /ideas appreciated.
Thanks
Mark

Hi Shaun,
No we are using the the ZCM 11.2 pxe boot files.
Although we have upgraded to ZCM 11.2.3a the image files from 11.2.3.a and the latest October Imaging update are crashing.
I did post on the forums regards this and have a SR open for it. # 10865188291
We are testing an upload of this particular image for the 3rd time. The other images have uploaded without issues.
They have run a defrag on the disk prior to uploading.
Regards
Mark

Getting "Warning: The file upload failed.No such file or directory." while trying to upload image using af:inputFile

Hi,
I have a <af:inputFile> component which will upload only image file and render the corresponding image...
It work with normal application deployed on weblogic server however when i use same taskflow as a part of human task in SOA BPM worklist...
I get this warning message "Warning: The file upload failed.No such file or directory." for certain files where as it works for certain image files.
And in BPM whenever i upload PNG file it throws this error.
Please help.

For some files like Images with .png extensions it gives following error :
java.io.IOException: No such file or directory
at java.io.UnixFileSystem.createFileExclusively(Native Method)
at java.io.File.checkAndCreate(File.java:1705)
at java.io.File.createTempFile0(File.java:1726)
at java.io.File.createTempFile(File.java:1803)
at org.apache.myfaces.trinidadinternal.config.upload.UploadedFileImpl._createOutputStream(UploadedFileImpl.java:284)
at org.apache.myfaces.trinidadinternal.config.upload.UploadedFileImpl.loadFile(UploadedFileImpl.java:208)
at org.apache.myfaces.trinidadinternal.config.upload.CompositeUploadedFileProcessorImpl._processFile(CompositeUploadedFileProcessorImpl.java:344)
at org.apache.myfaces.trinidadinternal.config.upload.CompositeUploadedFileProcessorImpl.processFile(CompositeUploadedFileProcessorImpl.java:95)
at org.apache.myfaces.trinidadinternal.config.upload.FileUploadConfiguratorImpl._doUploadFile(FileUploadConfiguratorImpl.java:329)
at org.apache.myfaces.trinidadinternal.config.upload.FileUploadConfiguratorImpl.beginRequest(FileUploadConfiguratorImpl.java:162)
at org.apache.myfaces.trinidadinternal.config.GlobalConfiguratorImpl._startConfiguratorServiceRequest(GlobalConfiguratorImpl.java:610)
at org.apache.myfaces.trinidadinternal.config.GlobalConfiguratorImpl.beginRequest(GlobalConfiguratorImpl.java:216)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:155)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.bpel.services.workflow.client.worklist.util.WorkflowFilter.doFilter(WorkflowFilter.java:175)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.bpel.services.workflow.client.worklist.util.DisableUrlSessionFilter.doFilter(DisableUrlSessionFilter.java:70)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

LSO Content Player Error - HTTP Error 404 - File or directory not found

Hi All
Please could you assist.
I have published a course to my ISS CMS and configured the links in both ECC and J2EE lsm/mediator.
Result
Username='username', SystemName='HRD', Client='030', Host='22.22.22.22', Language='EN', SystemNumber='00', EnablePoolSharing='true', MaxConnection=50, AbapDebug=false:
CPCFG.RSURL = http://iiscmshost.domain/LSO600/Content/
CPCFG.REPUS = username
ServerURL=http://iiscmshost.domain/LSO600/Content/ ok!
I was able to successfully publish the course from the Authoring Environment to the CMS server.
When selecting the starting the course from the portal with content player i get the following error.
HTTP Error 404 - File or directory not found
But the URL is referring to - http://iiscmshost.domain/lms/mediator/courseview?sid=8685627505550088697845288091101&language=EN&sys=HRD&client=030&sap-accessibility=X
How does directory http://iiscmshost.domain/lms/mediator get created when the content is in http://iiscmshost.domain/LSO600/Content ??
Secondly can I change this reference to my LSO600/Content directory.
Please advise with any information. Point will be awarded.
Regards
Maahir

Dear Maahir,
We are facing the same problem. We are pointing over CMS to IIS, instead of KM content of portal. We are successfully able to release and publish the course, then attach to a course participant also.
But. When participants logs into the portal and click on Start Now. It giving 404 file not found Error. Its the same error. All our Course and content pointed to CMS IIS Server Url.
When we did the content player config test, result is NOT OK. We have required R3 authorization and CMS user authorization also with admin rights. Content Player console is working in AE when we start up the course. Its showing the error.
So, it seems like content player is not working properly. Bcoz we are launching course from http://WEBDAV repository server maintained in back end system. Which is the IIS(CMS Server)for us. Do we need to maintain anything separately to launch a course from IIS Server on R3 and SAP Portal. Below sample URL from page.
http://Sever:port/lms/mediator/courseview = xxxxxxxxxxxxxxx
Could you please us know, how did you resolve the issue and tell me the cause of this issue.
Thanks and Regards
Obli

Sumtotal error 404 - file or directory not found

Hi,
We have a SCORM 1.2 compliant content created using Captivate 5. It's a multiple SCO (6 modules) combined into a single SCORM package. When the package was loaded in Sumtotal LMS, one of the modules alone does not launch and throws the below error.
404 - File or directory not found.
The resource you are looking for might have been removed, had its name changed, or is temporarily unavailable.
However all the modules get loaded when tested in Saba LMS. Any ideas on what could the issue in Sumtotal? Would greatly appreciate a resolution at the earliest.
Thanks,
Sudarsan

r_sudarsan,
I 've seen that error 404 numerous times in the past. It always seems to be related to the configuration of the web server not able to match the Domain name with the IP address, wrong path name, check the spelling, browser startup default settings to locate the website. etc. It always seems to be a configuration problem.
Good Luck.

How to upload and download a files into AL11 directory in ABAP

Hi,
How to upload and download a files into AL11 directory in ABAP
thanks
Moderator message: please search for available information/documentation.
Edited by: Thomas Zloch on Mar 21, 2011 9:18 AM

You should try one of these forums for an answer to your question:
http://swforum.sun.com/jive/forum.jspa?forumID=116
http://community.java.net/netbeans
http://linux.java.net

MAX says visa32.dll not found in WINNT\system32 directory. File is there, have reinstalled and rebooted just to be sure. Same error.

MAX says visa32.dll not found in WINNT\system32 directory. File is there, have reinstalled and rebooted just to be sure. Same error. Why?

Hi,
What version of VISA are you using? What version of MAX?. What OS are you using?
You can try using the lastest version, NI-VISA 3.0. The installer also includes the lastest version of MAX (3.0). The installer can be found in the Driver and Updates >> NI-VISA
DiegoF
National Instruments.

Upload menu showing folders not files?

When I try to upload a file in either Safari or Firefox, the upload menu shows only folders, not files. The folders are not clickable, so I am unable to upload anything.
Ideas?
Brenda

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot insafe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Breadcumbs don't work online: '404 - File or directory not found'

Breadcrumbs all work fine when testing my AirHelp application offline on my Windows 7 pc, (or if I access it as online browser based help). However, when I try to test the online Airhelp most of the breadcrumbs return a '404 - File or directory not found' error.
My RoboHelp Project has been created as follows:
1. There is a homepage created inside of RoboHelp
2. Then I have linked a number of framemaker books, for each of which the FM table of contents is being converted to create a new associated TOC.
3. In the master TOC I have added a New TOC Book for each framemaker book (making it a book with a link to a htm), under the New TOC Book I have inserted a TOC placeholder for the appropriate associated TOC.
When the Online AirHelp version is run, the breadcrumbs can only be used to navigate to the homepage and to the New TOC Books at the level immediately beneath the home page. The links to these pages seem to make sense, being of the form:
Breadcrumb
Link
Home
event:homepage.htm
Home/User Guide
event:../../../User_Guide.htm
Where it goes wrong is for the breadcrumbs futher down the path which have links similar to those shown below:
Breadcrumb
Link
Home/User Guide/Introduction
event:introduction.htm
Home/Handbook/Sign_Conventions
event:Sign_Conventions.htm
In both of the above the URL request that is being passed to the online server is not the full path, (it seems to be a relative path?) Is this the reason why the breadcrumbs don't work, and if so can you suggest what I need to do to get them working?
I am up against a deadline, and at the moment the only way forward I have is to abandon the converted Framemaker TOCs and have RoboHelp autocreate a TOC for the whole project for me, however this is not a practical solution because the folder structure is not the same when I do this and would require a great deal of manual editing each time it is rebuilt.
Hoping somebody out there can please assist?
Thanks.

Thanks TP,
I have many public IP's available. Do I need to install the RD Web access role on the DMZ server that has the RD Gateway role even if i have spare public IP's available?
I've basically have this setup "3.1. RD Gateway without AD DS in perimeter network deployment:"
On the below link
http://blogs.msdn.com/b/rds/archive/2009/07/31/rd-gateway-deployment-in-a-perimeter-network-firewall-rules.aspx
currently there's an CNAME record in DNS for remote.external.com which points to Server3.internal.pri
which holds the RD
Connection Broker, RD Licensing and RD Web Access roles
Are you saying to create an A record and point it to Server3.internal.pri
internal IP? I'm not getting certificate errors (yet) so do i have to run the script? i ask this as the error message i'm getting (404 - File or directory not found) doesn't seem to be related to certificates, i'm making changes to a production environment
so i have to be extra carefull!
Cheers!

RD Gateway - 404 - File or directory not found - Remote Desktop Services 2012 R2 - External users

Hi All,
I’m currently deploying RDS to our network, I’ve installed and configured the RD Gateway role – accessing https://remote.external.com/RDWeb internally works fine but not externally. Externally https://remote.external.com reaches the servers default IIS page
but once I put /RDWeb I get the error 404 – File or directory not found.
I’m not sure what’s not configured properly but below is the setup – keep in mind that the internal domain is different to the external FQDN i.e. the server name of the GD Gateway is Server4.internal.pri and the FQDN to access RDS externally is remote.external.com
- Server1.internal.pri Internal Network
RD Session Host
- Server2.internal.pri Internal Network
RD Session Host
- Server3.internal.pri Internal Network
RD Connection Broker, RD Licensing, RD Web Access
- Server4.internal.pri DMZ Network
RD Gateway DMZ IP/ Internal IP
- Certificate for all servers is a wildcard *.external.com
In the RDS Deployment Properties
Deployment Properties> Certificates> all certificates are configured with a wildcard certificate e.g. *.external.com
Deployment Properties> RD Web Access server= server3.internal.pri URL = https:// server3.internal.pri/RDWeb
Deployment Properties> RD Gateway> Server name = remote.external.com – I’ve understood that this is the URL (FQDN) to access RDS and not the RD Gateway servername itself
RD Gateway Manager Properties
Browse and import certificate> *.external.com
Transport Settings> IP address for HTTPS = 192.168.x.x (DMZ IP)
Transport Settings> IP address for UDP = 192.168.x.x (DMZ IP)
IIS
Both the RD Gateway and the Connection Broker have https certificate as *.external.com and in the site bindings https is * for ip addresses, specifying the DMZ IP on the RD Gateway doesn’t fix the issue
DNS, Network, Domain etc..
remote.external.com points the Public IP in DNS with an A record – Public IP is NATed to the RD Gateways DMZ IP on the firewall – RD Gateway is joined to the domain – RD Gateway has another NIC with an internal IP
Firewall
Port 80, 443, 3391 is open from the internet to the RD Gateways DMZ IP, RD Gateway also has an internal IP with full access to the other RDS roles
Errors I receive with the MS Best Practice Analyzer
Problem:
The Remote Desktop Gateway (RD Gateway) server Secure Sockets Layer (SSL) certificate may not have a valid certificate subject name.
Impact:
If the RD Gateway server is configured to use an SSL certificate with a certificate subject name that is not valid, users cannot connect to internal network resources (computers) through the RD Gateway server.
Resolution:
Use the RD Gateway Manager tool to select a valid SSL certificate for the RD Gateway server to use.
Even though I did configure this… seems like it might be from the split DNS
Other
I can access RDS from the RD Gateway box https://remote.external.com and client machines
no certificate errors internally, either externally when I reach the default IIS page of the RD Gateway i.e. https://remote.external.com
Any help is much appreciated!

Thanks TP,
I have many public IP's available. Do I need to install the RD Web access role on the DMZ server that has the RD Gateway role even if i have spare public IP's available?
I've basically have this setup "3.1. RD Gateway without AD DS in perimeter network deployment:"
On the below link
http://blogs.msdn.com/b/rds/archive/2009/07/31/rd-gateway-deployment-in-a-perimeter-network-firewall-rules.aspx
currently there's an CNAME record in DNS for remote.external.com which points to Server3.internal.pri
which holds the RD
Connection Broker, RD Licensing and RD Web Access roles
Are you saying to create an A record and point it to Server3.internal.pri
internal IP? I'm not getting certificate errors (yet) so do i have to run the script? i ask this as the error message i'm getting (404 - File or directory not found) doesn't seem to be related to certificates, i'm making changes to a production environment
so i have to be extra carefull!
Cheers!

Issues with Receive Adapter receiving a file that has not completed uploading while send multiple files on the Send Adapter

Hello,
I am only a few weeks old into BizTalk so I am new to this application.
The pieces I have for my development environment consists of the following:
FTP Server ---[SFTP Adapter]---> BizTalk 2013 ---[FILE Adapter]---> Internal Network Share Drive
I currently configured a simple PassThru, One way Receive/Send in BizTalk where the Receive Port receives a file via SFTP
Adapter from our FTP server and the Send Port sends the file via the FILE Adapter to our Internal Network share drive.
The setup works great with small files. However, when I receive a large file on the FTP server, the Send Port sends multiple instances of the file on the FTP server because the Receive Adapter sees that the file is there, but not yet
fully uploaded.
Can someone please guide me as to how I can determine when a file is fully uploaded to the FTP server before the Receive Adapter fires?
Thanks,
Mitch

Yap BizTalk does not have control over locking the file during read/write Operation and its the third party which need to take care of this (by rename the file after upload ) .
If the file size is too large I would suggest to bypass the message box as it has performance bottleneck during peak hours
Apart from being repetitive, this is not good advice. There is no indication that the file is too large or will cause any "performance" issues.
The concurrency problem can happen with a file of any size.

CQ5 Startup errors ESAPI directory or file not readable.

Here is the startup screen output with the errors bolded, any help is appreciated.
:/lopt/dev/instances/author1/crx-quickstart/bin $ 31.05.2013 08:08:32.365 *INFO * [main] Setting sling.home=crx-quickstart (command line)
31.05.2013 08:08:32.371 *INFO * [main] Starting Apache Sling in /lopt/dev/instances/author1/crx-quickstart
31.05.2013 08:08:32.380 *INFO * [main] Checking launcher JAR in folder /lopt/dev/instances/author1/crx-quickstart/launchpad
31.05.2013 08:08:32.380 *INFO * [Apache Sling Control Listener@/127.0.0.1:43654] Apache Sling Control Listener started
31.05.2013 08:08:32.399 *INFO * [main] Existing launcher is up to date, using it: 2.4.1.R1416835 (org.apache.sling.launchpad.base.jar)
31.05.2013 08:08:32.402 *INFO * [main] Loading launcher class org.apache.sling.launchpad.base.app.MainDelegate from org.apache.sling.launchpad.base.jar
31.05.2013 08:08:32.440 *INFO * [main] Setting sling.launchpad=/lopt/dev/instances/author1/crx-quickstart/launchpad
31.05.2013 08:08:32.441 *INFO * [main] Setting sling.home=crx-quickstart
31.05.2013 08:08:32.441 *INFO * [main] Setting org.osgi.service.http.port=4502
31.05.2013 08:08:32.441 *INFO * [main] Starting launcher ...
31.05.2013 08:08:32.442 *INFO * [main] HTTP server port: 4502
RAWProcessor succesfully installed
31.05.2013 08:09:06.608 *INFO * [main] Startup completed
Attempting to load ESAPI.properties via file I/O.
Attempting to load ESAPI.properties as resource file via file I/O.
Not found in 'org.owasp.esapi.resources' directory or file not readable: /lopt/dev/instances/author1/ESAPI.properties
Not found in SystemResource Directory/resourceDirectory: .esapi/ESAPI.properties
Not found in 'user.home' (/lopt/adobe) directory: /lopt/adobe/esapi/ESAPI.properties
Loading ESAPI.properties via file I/O failed. Exception was: java.io.FileNotFoundException
Attempting to load ESAPI.properties via the classpath.
SUCCESSFULLY LOADED ESAPI.properties via the CLASSPATH from '/ (root)' using class loader for DefaultSecurityConfiguration class!
Attempting to load validation.properties via file I/O.
Attempting to load validation.properties as resource file via file I/O.
Not found in 'org.owasp.esapi.resources' directory or file not readable: /lopt/dev/instances/author1/validation.properties
Not found in SystemResource Directory/resourceDirectory: .esapi/validation.properties
Not found in 'user.home' (/lopt/adobe) directory: /lopt/adobe/esapi/validation.properties
Loading validation.properties via file I/O failed.
Attempting to load validation.properties via the classpath.
SUCCESSFULLY LOADED validation.properties via the CLASSPATH from '/ (root)' using class loader for DefaultSecurityConfiguration class!

Hi jtwcarboy,
Apart from message in logs are you facing any functionality issue is AEM?
Thanks,
Sham

How to get folder(directory path only not file path) from local file system

Hi Firends,
How to get folder(directory path only not file path) from local file system , whenevr i will click on browse button.
Please give reply for this one , if anybody knows.
Thanks,
Anderson.

Hi Anderson,
if you're using flash.filesystem.FileReference - then it is run in black box - except of filename, size and creation data (and few other properties available after some operation succeeded). This is part of security features in Flash runtime (described in header section):
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/net/FileReference .html
This for example implies that user can download a content to local machine - but that content cannot be loaded back into Flash runtime. For this you would need either Air runtime flash.filesystem.File:
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/filesystem/File.h tml
(so you would created Air runtime based application: desktop or mobile but not web, even as standalone project) or you would need one of 3rd party tools that add file access/file information features to standard Flash runtime applications converted to standalone native applications.
hth,
kind regards,
Peter

Uploading a directory (not file)

Similar Messages

Maybe you are looking for