Uploading Contracts through XI into CCM

Hi,
We are using SRM 5.0, CCM 2.0, XI 3.0, EBP 5.5.
Kindly let me know what is the process of uploading contracts using XI from SRM's EBP to CCM.
Thanks,
Swetha

Hi,
Check the below link:-
Upload Contracts
Regards.
Praveen

Similar Messages

How to upload data through excel into ssm

Dear SSM Gurus,
I am new to strategy management ,PAS Model I have created successfully based on requirement given by our business unit.
Business unit (FMCG product dealer) have 5 region , and 2 accounts under which we have multiple stores ,
I have sales data in excel sheet by store monthly(actual & target)
I have created an Link to excel sheet which has following format
Time     Name of the store     sales_act     sales_target
Jan-09     Store1 region 1 account1      290     300
Feb-09     Store1 region 1 account1      320     350
Please suggest how to upload excel data into Actual and traget variables (suggest me IDQL commands).
Regards
Arif

Dear Arif ,
For loading the data from an excel sheet , using a procedure is very handy.If possible , create a separate procedure for loading the targets. I am giving you a rought transcript of a procedure which loads data from an excel sheet. Please make the appropriate changes where ever necessary :
....Clear all previous selections of dimensions and variables
clear status
...Set period range for the data to be loaded
set period 2009
....Selecting dimensions and variables for data mapping
SET DATE DMY
select dim STORE input
....Select the variables to be loaded
select var sales_act
....Set across and down layout to match source data layout
across var down STORE,time
ACCESS EXTERNAL
USE 'C:\actual_data.csv'
DESCRIPTION FREE ,
Peek only 10
.....Reading the data into the model
read
.....To end access system
end
Please check if the data loads properly at the input level. If this is successful , then we can consolidate the data and then you can get the data at other levels as well.
Hope this helps
Vijay

Creation of Purchase Contract through Upload

Dear Gurus,
Mine is SRM 5.0 version and its ECS. I have created a Contract in the frontend and then Downloaded the contract in an Excel and then Deleated the Document Number and the GUI Id's and when again trying to upload the file through the Upload option from Frontend, it gives the following error message:
The specified file could not be read
Please Advice on the above issue.
Thanks in Advance,
Mohit.

Hi
Please go through this ->
For moving contract from ERP to SRM system,please take help from
help.sap.com
they mentioned everything very clearly.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAISMM/CABFAISMM.pdf
http://help.sap.com/saphelp_srm50/helpdata/en/42/f93dfd975f3ee6e10000000a1553f7/frameset.htm
Also please refer to SAP Consulting Notes below ->
Note 859049 - SRM 5.0: Restrictions for uploading and downloading
Related Notes
907271 - Upload: New condition when you update the item
812884 - How to change the fields used for Excel Up- and Download
790860 - Frequently asked questions for Excel upload and download
734946 - SRM: Restrictions for upload and download
Note 734946 - SRM: Restrictions for upload and download
Related Notes
859049 - SRM 5.0: Restrictions for uploading and downloading
790860 - Frequently asked questions for Excel upload and download
673479 - Excel download: Quantities not displayed correctly
Note 812884 - How to change the fields used for Excel Up- and Download
Related Notes
863542 - Excel download for bid invitations with display variant
859049 - SRM 5.0: Restrictions for uploading and downloading
Note 790860 - Frequently asked questions for Excel upload and download
Note 673479 - Excel download: Quantities not displayed correctly
Also see the Report - BBP_CONTRACT_INITIAL_UPLOAD
You can use this report to upload the contracts and scheduling agreements from an ERP system to an SRM system. A contract or a scheduling agreement from the SAP backend system is uploaded to the SRM system as a contract or a global outline agreement (GOA), based on the transaction type customized in the SRM or SAP backend systems.
Refer to this link for details.
http://help.sap.com/saphelp_srm50/helpdata/en/6d/1e8442a07b0e53e10000000a155106/frameset.htm
Other related links ->
Re: Initial Upload of Contracts using Flat file to SRM
Upload legacy contract into SRM and CCM
Re: Contract Upload to New System
Re: Upload COntracts
Do let me know.
Regards
- Atul

Upload data from excel into database through pl/sql

Hi All,
I have excel which contains data lets say employee details,
I have one upload button ,which is used to upload excel and then i want to map the cell of excel to the database column and through plsql code i want to upload the excel data into database.
In short ,i want to upload the data from excel into database using plsql code,
or suggest me any other way to do this.(except the data load method present in apex)
Thanks,
Jitendra

if you use APEX 4 you can define you own table
the code below is for APEX 3
PROCEDURE pro_carga_planilla_prosp( p_archivo VARCHAR2) IS
v_blob_data BLOB;
v_blob_len NUMBER;
v_position NUMBER;
v_raw_chunk RAW(10000);
v_char CHAR(1);
c_chunk_len number := 1;
v_line VARCHAR2 (32767) := NULL;
v_data_array wwv_flow_global.vc_arr2;
v_rows number;
v_sr_no number := 1;
v_ok boolean := true;
v_local_ok BOOLEAN := TRUE;
v_reg_ok NUMBER := 0;
v_reg_ko NUMBER := 0;
v_localidad_id NUMBER;
v_departamento_id NUMBER;
v_cargo_id NUMBER;
v_prospecto_id NUMBER;
v_asesor_id NUMBER;
V_REG prospectos%rowtype;
BEGIN
-- Read data from wwv_flow_files
select blob_content into v_blob_data
from wwv_flow_files
where name= p_archivo;
v_blob_len := dbms_lob.getlength(v_blob_data);
v_position := 1;
-- Read and convert binary to char
WHILE ( v_position <= v_blob_len ) LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_line := v_line || v_char;
-- pro_log('linea '||v_line);
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved 
IF v_char = CHR(10) THEN
-- Convert comma to : to use wwv_flow_utilities 
v_line := replace(REPLACE (v_line, ',', ':'), ';',':');
v_line := replace(replace(v_line, chr(10)),chr(13));
if substr(v_line,1,1)= ':' then
v_line := '0'||v_line;
end if;
if instr(v_line,':',1,21) = 0 then
if instr(v_line,':',1,20) = 0 then
v_line:=v_line||':';
end if;
v_line:=v_line||':';
end if;
-- pro_log(v_line);
-- Convert each column separated by : into array of data 
v_data_array := wwv_flow_utilities.string_to_table (v_line);
-- Insert data into target table 
IF v_data_array(1) IS NOT NULL AND
v_sr_no <> 1 THEN
V_REG.NOMBRE:=ltrim(rtrim(v_data_array(2)));
V_REG.RAZON_SOCIAL:=v_data_array(3);
V_REG.DIRECCION := v_data_array(4)||' '||v_data_array(5);
-- PRO_LOG('PROSP 1 ' ||v_sr_no);
v_localidad_id := pack_empresas.get_localidad(v_data_array(6));
-- PRO_LOG('PROSP 1.1 '||v_sr_no);
V_REG.LOCALIDAD_ID:=v_localidad_id;
-- PRO_LOG('PROSP 1.2 '||v_sr_no);
V_REG.CODIGO_POSTAL:=LTRIM(RTRIM(v_data_array(7)) );
-- PRO_LOG('PROSP 1.3 '||v_sr_no);
-- PRO_LOG('PROSP 1.1 '||v_sr_no);
v_departamento_id := pack_empresas.get_departamento(v_data_array(8));
-- PRO_LOG('PROSP 1.4 '||v_sr_no);
V_REG.DEPARTAMENTO_ID:=v_departamento_id;
-- PRO_LOG('PROSP 1.5 '||v_sr_no);
V_REG.TELEFONO:=v_data_array(9);
--PRO_LOG('PROSP 1.6 '||v_sr_no);
V_REG.TELEFONO2:=v_data_array(10);
-- PRO_LOG('PROSP 1.7 '||v_sr_no);
V_REG.RUBRO:=v_data_array(11);
-- PRO_LOG('PROSP 1.8 '||v_sr_no);
V_REG.RUC:=ltrim(rtrim(v_data_array(12)));
-- PRO_LOG('PROSP 1.9 '||v_sr_no);
-- pro_log(v_data_array(1));
-- pro_log(v_data_array(2));
V_REG.CANTIDAD_EMPLEADOS:=RTRIM(LTRIM(v_data_array(13)));
-- PRO_LOG('PROSP 1.10 '||v_sr_no);
-- pro_log(v_data_array(14));
V_REG.CANTIDAD_BENEFICIARIOS:=RTRIM(LTRIM(v_data_array(14)));
--PRO_LOG('PROSP 1.11 '||v_sr_no);
V_REG.MAIL:=v_data_array(19);
-- pro_log(V_REG.MAIL);
-- PRO_LOG('PROSP 1.12 '||v_sr_no);
-- v_data_array(20):= replace(replace(v_data_array(20),chr(10)),chr(13));
if not v_data_array.exists(20) then
-- pro_log('existe');
-- pro_log(ltrim(rtrim(replace(replace(v_data_array(20),chr(10)),chr(13)))));
V_REG.Proveedor:= ltrim(rtrim(replace(replace(v_data_array(20),chr(10)),chr(13))));
else
v_data_array(20):=null;
end if;
-- V_REG.PROVEEDOR:=v_data_array(20);
-- PRO_LOG('PROSP 1.13 '||v_sr_no);
if not v_data_array.exists(21) then
V_REG.OBSERVACIONES:=v_data_array(21);
else
v_data_array(21):=null;
end if;
-- PRO_LOG('PROSP 1.14 '||v_sr_no);
-- PRO_LOG('PROSP 1.2 '||v_sr_no);
insert into prospectos (nombre,razon_social, direccion,localidad_id,codigo_postal,
departamento_id, telefono, telefono2, rubro,ruc,cantidad_empleados,
cantidad_beneficiarios,mail,proveedor,observaciones)
values (nvl(ltrim(rtrim(v_data_array(2))),v_data_array(3)), v_data_array(3),
v_data_array(4)||' '||v_data_array(5),
v_localidad_id, LTRIM(RTRIM(v_data_array(7))),v_departamento_id, v_data_array(9),
v_data_array(10),v_data_array(11), ltrim(rtrim(v_data_array(12))), RTRIM(LTRIM(v_data_array(13))),
RTRIM(LTRIM(v_data_array(14))),v_data_array(19),v_data_array(20), v_data_array(21))
returning prospecto_id INTO v_prospecto_id;
-- PRO_LOG('PROSP 2');
v_cargo_id := pack_empresas.get_cargo(v_data_array(17));
-- PRO_LOG('PROSP 3');
insert into prospecto_contactos (prospecto_id,nombre,apellido,cargo_id,
telefono,mail)
values (v_prospecto_id, nvl(v_data_array(15),'S/N'), nvl(v_data_array(16),'S/A'),
v_cargo_id, v_data_array(18), v_data_array(19));
-- PRO_LOG('PROSP 4');
v_asesor_id := pack_empresas.get_asesor(v_data_array(1));
-- PRO_LOG('PROSP 5');
insert into asignaciones (prospecto_id,asesor_id,fecha_asignacion)
values (v_prospecto_id, v_asesor_id, trunc(sysdate));
-- PRO_LOG('PROSP 6');
END IF;
-- Clear out
v_line := NULL;
v_sr_no := v_sr_no + 1;
END IF;
END LOOP;
delete wwv_flow_files
where name= p_archivo;
END pro_carga_planilla_prosp;
function hex_to_decimal
--this function is based on one by Connor McDonald
--http://www.jlcomp.demon.co.uk/faq/base_convert.html
( p_hex_str in varchar2 ) return number
is
v_dec number;
v_hex varchar2(16) := '0123456789ABCDEF';
begin
v_dec := 0;
for indx in 1 .. length(p_hex_str)
loop
v_dec := v_dec * 16 + instr(v_hex,upper(substr(p_hex_str,indx,1)))-1;
end loop;
return v_dec;
end hex_to_decimal;

Upload excel sheet data through sqlloader into oracle tables

hi everyone,
i am working with excel sheet with following records
8501      Jacob Marshall      15000      21/10/2009      Finance
8502      Chris Campell      50000      13/06/2008      R&D
8503      Simon Dough      50000      3/07/2008      Engineering
8504      Mark Haggai      75000      9/3/2006      Product Management
8505      Verica Beverley      45000      7/2/2008      HR
and i saved it in emp_details.csv
after that when i write following code to make control file
load data
infile 'C:\Documents and Settings\prashant_dabral\Desktop\a.txt'
into table tmp
field terminated by','optionally enclosed by" "
(emp_no,emp_name,salary,doj,dept_name)
after this pl\sqldev returning me error message that ORA-00900:invalid sql statement
can anybody tell me how to resolve issue
or
another method to Upload excel sheet data through sqlloader into oracle tables

A control file is a file located on the operating system, not some SQL or PL/SQL code you try and execute.
Create the control file as a file and then use that to load your data with SQL*Loader from the command line.
http://www.morganslibrary.org/reference/sqlloader.html
Or better still, create it as an external table and then you don't need a seperate control file or need to use sql loader from the command line...
http://www.morganslibrary.org/reference/externaltab.html

How to upload 20MB of file into MySQL through Java

Hi Friends
Anyone let me know how to upload 20MB of file into MySQL through Java programming, is there is any feature available, or any changes to be made in MySQL
Thanks
Sella

Don't know. Ask the MySQL folks. This is not a Java issue.

Right Tool to upload Contract data into SRM 5.0 system ?

Hi,
Could you tell me, the right tool to upload Contract data from SAP 4.5 into SRM 5.0 system using transaction code BBP_CTR_MAIN. ?
What would be the problem, if i go with LSMW?
Thanks in Advance,
Bobby

Hi Friends,
Could any one suggest me which tool (BDC/ LSMW/ BAPI) is suited to upload Contract data from SAP 4.5 into SRM 5.0 using transaction code BBP_CTR_MAIN.I am confusing with Arshad's reply on this.
Thanks in advance,
Bobby

Uploading Contracts into CLM

Hi,
I am new to E-sourcing and CLM , my client is implementing CLM. Our requirement is to upload all legacy contracts (from spreadsheet ) into CLM and later transfer the contracts to ECC.
I am not sure how to upload the contract this directly into CLM . Can someone guide me on the process.
Regards
Bidyut

Hi Bidyut,
What version of CLM are you on? If you on 7.0, the blogs below should help.
/people/robert.stevenson/blog/2011/04/18/building-a-clm-contract-repository-part-2-of-2
/people/robert.stevenson/blog/2011/01/24/an-overview-of-the-clm-contract-load-tools
If you are on earlier versions, to load Master Agreements you can use standard import template. To obtain a copy of the import template, click on RG link (next to the help button) > Contract Import Workbook.
Regards,
Vikram

I'm getting an error message after importing a table through Dreamweaver into a page developed in Muse.

I'm getting a couple of messages after importing a table through Dreamweaver into a page developed in Muse. I have compared the code of the page with the table with the page before I inserted the table and cannot find anything missing. the web address is http://gourmetdreams.com/weekly-menu.html
How can I clear this up?
I also noticed that when I uploaded the file there was one error: "- error occurred - Access denied. The file may not exist locally, may be open in another program, or there could be a local permission problem."

Thanks for your help! I imported the table into Muse, then exported the site as html and opened it in Dreamweaver. I should've tried that in the first place but gave up when I couldn't edit it in Muse. I didn't know you could edit the html right in Muse. Also, my styling and the images I was using weren't showing up in Muse but once I opened it in Dreamweaver, everything fell into place. AND I could edit it! My client needs to edit this page every week, so I needed to be sure she could do that. She doesn't use Muse but does use Dreamweaver. At this point, I think I'll leave it alone and not try to style it with inline css. Maybe when I get a little more time, I'll try it. I just don't want to mess things up now that the're working.

Upload an XML file into the Internal table

Hi Guys,
I want to know, how to upload an xml file into the Internal table through ABAP programming

you just wanted to load the xml file into internal table (as a table of binary strings)or load the xml data mapped to itab row columns
for the first one you can simply use gui_upload
and for the second one you need to load the xml file using gui_upload and use XLST program to transform into an itab
Regards
Raja

How to upload an XML file into another system

Hi friends,
I have a requirement where I need to upload an XML file into one system
which has been downloaded using another system.
I have tried using the method ' cl_gui_frontend_services=>gui_upload'
to upload the file but it is going for dump.
I have used the method ' w_xml->import_from_file' also,
but it is also going for dump ,because both methods are using the same FM
' GUI_UPLOAD'.
Can any one suggest on this.
Regards,
Bhargavi.D

"Here is the Explaination for uploading the XML Format file to sap " through ABAP Program ....
1. Basically you simply have to convert the XML file into the proper IDoc format. There are many ways to achieve this. One solution would be to convert it externally to SAP, e.g. via VB Script or with an XSLT transformation. Or you use the built in SAP functions for importing an IDoc from an XML stream.
2. Uploading a file is either done via GUI_UPLOAD or via the usual way of reading a file from the application server (Open dataset. Read dataset) But what do you mean by "send to external system"? Do you want to convert an IDoc into XML? Then you simply define an XML port with WE21 to send the IDoc out.
Here is an example of code that loads an XML from file and posts it as an IDoc. Please keep in mind that the XML has to be in its canonical format as described in the interface repository: ifr.sap.com (choose the template of the desired IDoc from there as an example).
data: data_tab type table of char1024.
data: XML_STREAM type string.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
 FILENAME = 'D:test.xml'
* FILETYPE = 'ASC'
* HAS_FIELD_SEPARATOR = ' '
* HEADER_LENGTH = 0
* READ_BY_LINE = 'X'
* DAT_MODE = ' '
* CODEPAGE = ' '
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* CHECK_BOM = ' '
* IMPORTING
* FILELENGTH =
* HEADER =
TABLES
 DATA_TAB = DATA_TAB
EXCEPTIONS
 FILE_OPEN_ERROR = 1
 FILE_READ_ERROR = 2
 NO_BATCH = 3
 GUI_REFUSE_FILETRANSFER = 4
 INVALID_TYPE = 5
 NO_AUTHORITY = 6
 UNKNOWN_ERROR = 7
 BAD_DATA_FORMAT = 8
 HEADER_NOT_ALLOWED = 9
 SEPARATOR_NOT_ALLOWED = 10
 HEADER_TOO_LONG = 11
 UNKNOWN_DP_ERROR = 12
 ACCESS_DENIED = 13
 DP_OUT_OF_MEMORY = 14
 DISK_FULL = 15
 DP_TIMEOUT = 16
 OTHERS = 17
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'CONVERT_TABLE_TO_STRING'
EXPORTING
 I_TABLINE_LENGTH = '1024'
IMPORTING
 E_STRING = XML_STREAM
TABLES
 IT_TABLE = DATA_TAB[].
write: / xml_stream color col_total.
data: CONTENT_LENGTH type string.
data: CONTENT_TYPE type string.
data: REMOTE_ADDR type string.
CALL FUNCTION 'IDOC_INBOUND_XML_VIA_HTTP'
EXPORTING
 XML_STREAM = XML_STREAM
 CONTENT_LENGTH = content_type
 CONTENT_TYPE = content_type
 REMOTE_ADDR = remote_addr
EXCEPTIONS
 NO_IDOCS_SAVED = 1
 TAG_ERROR = 2
 NO_DATA_RECEIVED = 3
 NO_IDOCS_RECEIVED = 4
 SEGMENT_ERROR = 5
 IDOC_WAS_SEND_SECOND_TIME = 6
 OTHERS = 7
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
write: / sy-subrc color COL_NEGATIVE.
ENDIF.
reward points if it is usefull.......
Girish

Upload Attachements(Doc File) into SAPand Read The same in BADI

Hi All,
I am Nagesh, and presently working on a BADI(NOTIF_EVENT_POST) for sending emails when a new Notification is created through QM01 Transaction Code, and its working very very fine. But now an additional requirement has come up, where i need to upload an Standard Format Word Document into SAP and then attach this file to the Mail to which the converted PDF Smartform file has been attached and then send both files in single mail to concerned Vendor. So I tried to upload the .Doc file into SAP by using OAER TCode with following Parameters
Class name              :            PICTURES
Class type               :            OT
Object key               :            CAPA.
I exactly dont know whether this is the right format or not, please help me, if this is possible or not.
And also I uploaded the same doc file from application server to Presentation Server using Tcode CG3Z, to a ditectory which exists in SAP (Checked in AL11 Tcode). So the nhow to read that complete file to send the same as attachemnts without making any changes .
Regards,
Nagesh Kumar.
Edited by: Nagesh Kumar on Mar 12, 2010 9:39 AM
Edited by: Nagesh Kumar on Mar 12, 2010 11:32 AM

Hi All,
I am Nagesh, and presently working on a BADI(NOTIF_EVENT_POST) for sending emails when a new Notification is created through QM01 Transaction Code, and its working very very fine. But now an additional requirement has come up, where i need to upload an Standard Format Word Document into SAP and then attach this file to the Mail to which the converted PDF Smartform file has been attached and then send both files in single mail to concerned Vendor. So I tried to upload the .Doc file into SAP by using OAER TCode with following Parameters
Class name              :            PICTURES
Class type               :            OT
Object key               :            CAPA.
I exactly dont know whether this is the right format or not, please help me, if this is possible or not.
And also I uploaded the same doc file from application server to Presentation Server using Tcode CG3Z, to a ditectory which exists in SAP (Checked in AL11 Tcode). So the nhow to read that complete file to send the same as attachemnts without making any changes .
Regards,
Nagesh Kumar.
Edited by: Nagesh Kumar on Mar 12, 2010 9:39 AM
Edited by: Nagesh Kumar on Mar 12, 2010 11:32 AM

Uploading Excel sheet data into internal table

Hi All,
I want to upload Excel file data into internal table. My problem is that my excel file having more than one sheets. I want to upload the data of particula Excel sheet..
Please suggest me how can I upload particulat Excel sheet data .
Thanks and regards
Praveen

check this link
Uploading multiple excel sheets
You can check Satish's answer in the above link
Re: uploading data from excel sheets through BDC's into sap system
Award points if found helpful

Upload openoffice excel file into internal table

Hi Everyone,
I have a requirement where in we need to upload vendor master data into SAP.
The data is available in excel format. But the excel sheet was created in openoffice s/w and client is not allowing
us to install MS-Office so that we cut and paste the data by creating anexcel file.
Now there is an option of saving the excel file in openoffice s/w as MS-Excel 95 format with .xls extension.
But since we are saving this in openoffice enivoronment the FM ALSM_EXCEL..... data is not improting this excel file into
Did somebody faced this issue before. Pls share the approach to solve this issue.
Regards,
Vinay

Hi !
you can use the Function module TEXT_CONVERT_XLS_TO_SAP to upload xcel file to internal table
please go through the code below.
REPORT zupload_excel_to_itab.
TYPE-POOLS: truxs.
PARAMETERS: p_file TYPE rlgrap-filename.
TYPES: BEGIN OF t_datatab,
col1(30) TYPE c,
col2(30) TYPE c,
col3(30) TYPE c,
END OF t_datatab.
DATA: it_datatab type standard table of t_datatab,
wa_datatab type t_datatab.
DATA: it_raw TYPE truxs_t_text_data.
At selection screen
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
field_name = 'P_FILE'
IMPORTING
file_name = p_file.
*START-OF-SELECTION.
START-OF-SELECTION.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_FIELD_SEPERATOR =
i_line_header = 'X'
i_tab_raw_data = it_raw " WORK TABLE
i_filename = p_file
TABLES
i_tab_converted_data = it_datatab[] "ACTUAL DATA
EXCEPTIONS
conversion_failed = 1
OTHERS = 2.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
END-OF-SELECTION.
END-OF-SELECTION.
LOOP AT it_datatab INTO wa_datatab.
WRITE:/ wa_datatab-col1,
wa_datatab-col2,
wa_datatab-col3.
ENDLOOP.
hope this will help you.
Regards,
Kiran

How to import DLU into CCM

Hi everyone
I am a voice amatuer, so who can tell me how to import DLU into CCM. I never did it. please tell me the detail step.
Thanks

Hi
In general:
1) You receive an 11-digit PAK code from Cisco.
2) Go to www.cisco.com/go/license, and register the PAK code. For this you need your CCM licensing MAC address; one way to find this is go to CCMAdmin (ccmpublisher/ccmadmin), log in, go to System/Licensing/Upload License, then view an existing license to see what the 'host' part refers to. Another is to go to ccmpublisher/cmplatform, log in, and go to Show/Network.
3) You receive a .lic file from Cisco via email
4) Log into the CCM Publisher at ccmpublisherip/ccmadmin
5) Go to system/licensing/Upload License and upload your file
Regards
Aaron
Please rate helpful posts...

Uploading Contracts through XI into CCM

Similar Messages

Maybe you are looking for