Urgent:Calculating Burden Cost even after disabling the Burden Schedule

Hello Guys,
Can any one help me on this query,
Version 12.1.3
Business was calculating raw and burden cost before,Now we are Importing Raw Cost from Third Party System and does not want to add burden cost to these transactions.After Importing we are running PRC:Distribute and create burden transactions.It taking the burden muliplier in burden schedule and adding to the transactions.
We have end dated the effective date for burden schedule with 1-Jan-2000.But we still find that it's burdening the transactions after 1-Jan-2000.
We have not defined any burden override at Project and Task Level.
Is their any option left out to disable the burdening for a project.
Regards,
satish
Edited by: 874738 on Oct 11, 2012 9:13 PM

Hello
In first case ideally it should stop burdening but strange if it is not !!!.
Ny ways try attaching absolute burden hierarchy and runing compile burden procedure. > If not work try keeping multiplier as 0 > or try removing expenditure types in burden structure > compile > try ur luck !!!
if that nothing works then raise the SR with Oracle..
Ny ways a question in my mind...Y r u runing the PRC:Distribute and create burden transactions procedure when u dont want to burdent the transactions?
All the Best
Thanks

Similar Messages

Auto logout even after disabling the setting

I have an ongoing problem with my MacBook Pro (mid 2012) with OS 10.10 going into automatic logout after 57 minutes of inactivity.
I have gone into:
System Preferences > Security & Privacy > General then Advanced tab.
And then I have both de-selected the automatic logout after 57 minutes of inactivity, and changed the time of inactivity, but the system always goes back to the default within minutes of changing the settings (I've gone out and locked the settings immediately after and then gone back to check and it is still set at that stage).
What else do I need to do to stop this automatic logouts?
Thanks

Hello
In first case ideally it should stop burdening but strange if it is not !!!.
Ny ways try attaching absolute burden hierarchy and runing compile burden procedure. > If not work try keeping multiplier as 0 > or try removing expenditure types in burden structure > compile > try ur luck !!!
if that nothing works then raise the SR with Oracle..
Ny ways a question in my mind...Y r u runing the PRC:Distribute and create burden transactions procedure when u dont want to burdent the transactions?
All the Best
Thanks

Trace is still getting generated even after disabling the profile option Initialization SQL Statement - Custom

Hi All,
we have a problem with profile option "Initialization SQL Statement - Custom". we have set this at user level. after some time, we have cleared the profile option value for this user.
But we can still see the generated trace files are getting updated. we did checked this trc files from path returned from below query.
select name, value
from v$parameter
where name like 'user_dump_dest';
Please help us on how to resolve this issue. we are using Oracle Apps R 12.1.2 version.
Thanks in advance
Raghava

Before logging out we suspect that he closed the browser instead of logout link.
What if you make the user logout, can you reproduce the issue then?
We have verified the profile options for this user and found that value is cleared for profile Initialization SQL Statement - Custom.
How do you know that the files were generated for this user and because of this profile option? Have you verified profile options for all users at all level?
Thanks,
Hussein

Why ill the flash player not intialize even after disabling firewall and antivisurs software

Why will the flash player not intialize even after disabling firewall and anitvirus software?

Windows XP and internet exployer? I can get the flash player to begin the
download but stops at about 50% initalization
Greenleaf Compaction, Inc.
142 W. Main
P.O. Box 265
Hopkins, MI 49328
Phone: 1-877-552-9369
Fax: (269) 793-7298
New email address: [removed]

AMD GPU fan runs constantly even after disabling DGPU

I have a HP-Pavilion dv6 6121TX, with AMD 6770m gpu.
The fan of the gpu runs constantly even after disabling it using the following command
echo OFF > /sys/kernel/debug/vgaswitcheroo/switch
the output for "cat /sys/kernel/debug/vgaswitcheroo/switch" is as follows
0:DIS: :Off:0000:01:00.0
1:IGD:+:Pwr:0000:00:02.0
It shows that the DGPU is off and yet the fan for the same runs continuously at full speed.
Would be really grateful for any suggestions.
Thank you.

You might also try a different battery if you have access to one. Unfortunately, many of the replacement batteries being shipped by Apple are defective. They don't fit properly into the battery bay. I suspect that if the quality control is this poor, then it seems likely that other problems will arrise as well. Check carefully that the battery itself is not overheating. Another possibility which also happened to me is that after installing the last upgrade to the operating system, one or more of the third party widgets became problematic, causing the same problem you describe. After removing all third party widgets, the problem stopped. Good Luck

CK40N - Still open even after applying the note

Hello Everyone!
Greetings!
Experiencing issues in the costing run. SAP ECC 5.0
After the marking job completion observed that there are some u2018Still Openu2019 items. After some research found the SAP notes u2013 0000542790, 0001321242 & 0001402978.
SAP note 0000542790 is not applicable to us as the client is on SAP ECC 5.0. For the short term fix, as per the note 542790 have executed the command u2018=cksuu2019. It worked.
To apply the notes 0001321242, 0001402978 was testing in the test systems and I still see the u2018STILL OPENu2019 items even after implementing the SAP notes 0001321242 and 0001402978. Both the notes have been sucessfully implemented and also verified the corrections.
Any suggestions/advice, please. Thanks in advance !
Satish

Hi Satish,
There can be valid reasons for the 'still open' Materials.
The following are reasons for 'still open'
1. the materials were included in another costing run so there was an
overlap in released cost estimates
2. there was already a released cost estimate for those materials so
the system did not allow for another one - this could have been costed
manually and released manually (ck11) rather than in ck40n
3. there was a stop in the job that ran to release them (you mentioned
periods were closed). After the restart, some of the statistics could
have been incorrectly updated.
Furthermore, please see the note:
542790 Inconsistency correction: Costing run statistics
If need need to find the 'still open' Materials.
If you run tCode 'SE16' and view the table table KALM which contains
the entries for all materials costed within the costing run.
Field 'KALM-FEH_STATUS is the cost estimate's status after step costing.
1) Find cost estimates created originally within cstg run
So, you have to select all entries of KALM for the specific costing
run which are having KALM-FEH_STATUS = 'KA'.
This is the number of cost estimates which should have been marked in
the later marking step.
2) Find cost estimates released successfully
The set of released cost estimates is given by selection of table
KEKO: specify KALAID and KALADAT and FEH_STA = 'FR'.
3) Find missing cost estimates
Compare the results of 1) and 2):
Which material/plant have an KALM entry, but not a released cost
cost estimate ?
> this will be the set of cost estimates you are looking for...
Regards,Declan

I want to turn my macbook air off. the shut down button already appeared but the mouse/cursor just hang and won't work. even after pressing the enter button to shut my mac off won't work. what will i do?

i want to turn my macbook air off. the shut down button already appeared but the mouse/cursor just hang and won't work. even after pressing the enter button to shut my mac off won't work. what will i do?

This is not a reply. I just want to elaborate on this problem.
My computer freezes occasionally when it is used after being sleep for a while. The spinning ball appears and everything is totally disabled. Nothing on the keyboard works.
The mouse moves, but does not work.
The only solution is to turn the power off and on (losing all data in open applications.)
I kept the System monitor running on the side to find out which program was running when the computer froze. The Monitor as well as all other applications froze, but the data showed:
Firefox 18.4%
Activity Monitor 0.9%
Firefox Plugin 0.2%
This is all the information I have. By the way, I am using iMac with OS 10.6.

My 4s Goes to speakerphone automatically while calling and does not go back to normal even after disabling speaker while calling

My 4s Goes to speakerphone automatically while calling and does not go back to normal even after disabling speaker phone button
AlsO sometimes I. Cannot hear anything in normal speaker even though the call Is going through and has been re ieved on the other end, I have to enable speaker and then disable it to route audio to normal speakers

I think that it is something wrong with kernel and graphic drivers but i'm not able to solve it from the beginning of using of Arch by me.
I'm not so sure this issue is software-related only because in my case it seems the laptop screen enters power-saving mode (10-min timeout) on its own without any events logged (as shown by dmesg) so my next thought was OK, I'm going to get rid of this issue disabling the screen power-saving timeout in the BIOS and set it to never power down or something like that and from then on managing power mode manually; ie: when I want to power down I will just use systemctl suspend/hibernate which work fine ... problem is: there are no related options in my BIOS for such timeout.
The only timeouts I have are in /etc/systemd/logind.conf set to 30min (#IdleActionSec) (commented) by default so these are not in effect because the screens goes blank after 10m which is less than the (default) 30m in logind. Maybe setting loggind to 9m (un-commented) to catch the event before the machine-default one ?
IdleActionSec=9min
IdleAction=suspend
Will check it and report back.

I am trying to open iPhoto 9.3.2 on my iMac with OSX 10.7.4 and even after downloading the iPhoto updater it still will not open. Any suggestions.

I am trying to open iPhoto 9.3.2 on my iMac with OSX 10.7.4 and even after downloading the iPhoto upgrader it still will not open. Any suggestions.

Resetting Printing System helps OS X recognize new printers.
http://support.apple.com/kb/HT1341
When you add the printer, make sure you use IP > Jetdirect and the correct printer IP address.

Protect The Cells in the Excel Sheet Even After giving the password.

Hi All,
I need to protect the cells in the report even after unprotecting the sheet after giving password.
That is, i have used some excel formulas in some cells, these cells are to be protected.
In Reports using EVDRE all the cells are getting, "Locked" option selected in the Protection tab by default. Even if we change that Option and refresh the sheet Locked is getting selected again.
So once we Protect the sheet using password all cells are getting locked. But once we remove password all cells are free to enter.
I want the user of the Sheet to use only certain columns in the Sheet. and all the other columns should not be user editable.
Please help me out in solving this issue.
Thanks in Advance,
Regards,
G.Vijaya Kumar

Hi Vijaya,
I tested in my test environment and even after refresh , the range cells are still editable, they didnt get locked. I did the following:
1. Selected the range or column in Excel, then Tools - Protection - Allow users to edit range. I selected the range and gave the password.
2. Next I protected the complete sheet.
3. Now entire sheet is protected. Now again I selected the range in which I want to edit, first time it will ask for password which you gave for the range. So I gave and I was able to edit the cells.
4. I selected other cells and was not able to edit it so they are still locked.
5. I tried to refresh the report , and then I selected the range cells to edit and still I was able to edit it. Those cells didnt get locked.
So did you do the same things?
Thanks.

Why is the Lightroom preview folder so big, even after purging the 1:1 previews?

1:1 or full-size previews take up a large amount of HD space, often many 10's of GB's. This is why building them on demand is an alternative to building them up front, and why you have options for auto or manually purging them. That said, it may not always be possible to delete 1:1 previews - more later.
Standard-sized previews are based on the pixel size option you chose in Catalog Settings. You have 4 choices: 1024, 1440, 1680 and 2048. If all you want is standard-sized then choose a size equal to or greater than your screen size. Lr also builds smaller versions at the same time. These are used for the thumbnail, 1:2, 1:3 and 1:4 zoom levels. Adobe call this the "preview pyramid".
1:1 previews will not be deleted unless your chosen standard-sized preview is less than half the size of the full-sized preview. For example, you have images with pixel dimensions of 3072 by 2048 pixels (6MP camera such as Canon 10D) and have selected 1680 pixels for standard-sized previews. Since a 1680 pixel preview is more than half the size of the original the full-sized preview will be kept, even after using the purge 1:1 preview command. Had you chosen 1440 pixel for standard-sized previews then the full-sized would have been purged (i.e. 3072/2=1536, which is greater than 1440). Now take the example of a larger camera, say a 8MP camera such as the Canon 1DMKII with an image size of 3504 by 2336 pixels. With the standard-sized set at 1680 pixels the full-size will again be purged (i.e. 3504/2=1752 pixels, which is greater than 1680 pixels).
Another thing worth mentioning - Lightroom will usually delay purging previews for deleted images until after the application has been closed and reopened, even then it might take a few minutes to clear the purged previews. The idea here is to ensure the previews don't get deleted whilst there's still a chance that they may be needed (e.g. you removed images by mistake then use Undo command to reinstate them).
Hopefully above explains why Lightroom doesn't behave as you expect. If it makes your head spin, think how much mine spun when writing it.

The chance of an answer is inversely proportional to the length of the posting. ;)
You do not indicate what your preview setting was while you accumulated a 12Gb preview folder. Nor do you indicate how many images are in your catalog.
Given your screen size of 1280 (laptp?) I would set the preview size to 1440 since this is still far less than half of your D3 images.
Cropping - I'll safely guess - has no effect on your preview size choices.
I confess that preview sizing and purging is confusing. I avoid the confusion by shouting "more disk, mama".

I had original iPhoto app from 2007, but in the last year it stopped working seemingly out of nowhere. Now I just installed iPhoto 9.5.1 but it won't open even after downloading the iPhoto Library Updater. My pictures are lost in the abyss.

I had original iPhoto app from 2007 or 2008, but in the last year it stopped working seemingly out of nowhere. Now I just installed iPhoto 9.5.1 but it won't open even after downloading the iPhoto Library Updater. My pictures are lost in the abyss.
I'm using OS Extended 10.9.5. I don't know what the original version of iPhoto was.

I just installed iPhoto 9.5.1 but it won't open even after downloading the iPhoto Library Updater
Have you run the iPhoto Library Upgrader? You need to direct it to the location of your old iPhoto Library by clicking the "Choose Library" button in the lower right corner of the panel you are seeing when the upgrade starts.

I dropped my ipad and the screen blacked out and could not be turned on even after pressing the sleep and home button

I dropped my ipad and the screen blacked out and could not be turned on even after pressing the sleep and home button.
I tried connecting the device to my computer and itunes said that it could not identify my device.

What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

SAPgui.exe is running even after closing the GUI components

Hello All,
Even after closing the SAP GUI components like Bex, WAD or RSA1 etc... i am able to see these processes are running under the Task Manager--> Processes....
even if i try to restart the system, error messages are occuring...saying that SAP is still opend...
Why it is happening, any ideas?
Thanks,
Ravi

Hi Dirk,
Thanks for your infomation. Infact, apart from this problem, i have the problem with saving the webtemplate. As it is taking much time to save a template after modifications, i had to terminate the wad process. It seems above 2 problems are related....any ideas?
Thanks
ravi
Message was edited by: Ravi Pasumarty

HT3964 My computer freezes after running for about 15 min even after setting the energy saving to 3 hours

My Mac computer freezes after running for 15 min even after seeting the energy saving to 3 hours. Any ideas how to stop the freezing/

Hi Teodorafrombc,
Thanks for visiting Apple Support Communities.
If your computer is becoming unresponsive, you may want to see if specific applications are causing this behavior. Try using the Force Quit menu to check for unresponsive applications:
Using the Force Quit feature of OS X makes an application close, even when it is not responsive.
Important: Normally you should not need to force quit an app to close it. When an app is forced to quit, any unsaved changes to open documents are not saved, so try these methods to normally close the app first:
Choose Quit from the app menu. For example, in Safari, choose Safari > Quit Safari.
Choose Quit by right-clicking or control-clicking on an app's icon in the Dock
You can find the article with these steps here:
OS X: How to quit an unresponsive application using Force Quit
http://support.apple.com/kb/ht3411
If your display is going blank or seems to be going to sleep unexpectedly, try these steps first:
Reset the system
You can reset the Mac's parameter RAM and SMC.
You can find the article with these steps and more information here:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
If these steps don't resolve the issue, feel free to reply with more information about the symptoms you are experiencing.
Best,
Jeremy

Urgent:Calculating Burden Cost even after disabling the Burden Schedule

Similar Messages

Maybe you are looking for