URGENT: Capture Issue

Hi!
I'm in a bind. I hired a Z1e kit for the weekend. Have shot a couple of tapes worth of footage, went to capture and had no luck. I shot HDV 1080i50.
At first I thought it may be because the camera was not set up correctly: I checked, but it was.
Then I thought FCP was not set up correctly: checked, but it was.
Then I thought I may be using a dodgy firewire cable: used another, no luck.
Then I thought it may be because I upgraded to FCP 5.1.3 last night from 5.1.2, so I tried iMovie, but still no luck.
Then I thought that maybe it was my G5. So I tried my PowerBook and you guessed it; no luck.
Then I read that it may be the internal clock in the camera. So I changed that, and went through all of the above again, but still no luck.
So far, I can only think it must be the camera (it keeps saying unplug FireWire cable, even when there is none plugged in), in which case I will need to call the hire company and have a row.
Do you agree? Or, is there something I may have missed, seeing as it is only my second time working with HDV?
Thanks,
LSE

Make sure the camera's settings are set correctly, so the firewire out is not downconverting to DV. Then make sure that the HDV easy setup you are choosing has the apppropriate frame rate and frame size for your footage.
With the correct match, your system should recognize the camera.
hope this helps -
Max Average

Similar Messages

A very urgent deployment issue about DBAdapter

Hello All,
I have a very urgent deployment issue about DBAdapter.
That DBAdapter is connect to DB2 AS400 Database. I have a developing database (jdbc:as400://server01/TEST) and a production database (jdbc:as400://server01/PROD).
During developing, I used DBAdapter wizard to create it, and import some tables, and set the Adapter to use jabc/DB2DS as connection information for easily deployment later.
Then I deploy to Production. I configured Data-source.xml and oc4j-ra.xml rightly; I set DB connection point to production database. But the DBAdapter still write into developing Database.
I checked the DBAdapter, the imported tables are something like this, TEST.table1, TEST.table2. And there are a lot "TEST" located in DB2Writer_toplink_mapping.xml, DB2Writer.xml, TEST.schema, DB2Writer.table1.ClassDescriptor.xml.
This TEST is refrer to the TEST in connect String jdbc:as400://server01/TEST.
I think this might be the reason cause the problem. As to production database, "TEST" should replaced by "PROD". If I changed it manually, I have to change every time when switch between TEST and PROD. And I also don't know if it is safe to do it? (I tried, and bring some toplink mapping problem)
By the way, for Oracle Database, because we use 2 instances for testing and production with same schema name, and do not have this issue.
Anyone could help and many thanks.
Kerr
Message was edited by:
Kerr

Hi Kerr,
The idea is to set up all connections in the BPEL or ESB services with logical names, e.g. typically of the form eis/DB/MyFinancialSystem or eis/DB/MyLogisticsSystem. This way, you do not have to modify code when deploying it onto different environments that serve different purposes.
When moving your services through their lifecyle, on every environment you deploy these to you will have the same logical connections configured on each instance, e.g. for DEV, QA, SIT, UAT and PROD. Only, in case of QA the actual physical connection is configured to point to the QA instance of the systems that your services interact with whereas in case of UAT it points to the UAT instance of the same system.
Maybe your problem is caused by connecting as user "SomeUser" when running the DB Adapter wizard during development and actually selecting objects from a different schema than you used to connect with, e.g. "Test" in your case.
Hth,
Sjoerd

HV20/FCP6/FW Problems/Capture Issues/WTH?!?!?!?!?!

Hello everyone. I have a Canon HV20 that was working fine for a day or two while I was capturing both HDV and DV footage from MIni DV tapes. I opened the log and capture window after changing tapes and BAM! it said it couldn't find the deck.
At first, I set the app up just like the Apple site said, and everything worked perfectly, even when dumping DV footage. Cameras setting never changed from factory default. Now this, and what's worse is that my computer won't recognize the FW device. I do have a G-tech plugged in as well, and with no HV20 the computer recognizes it in the FW800 port, but as soon as I plug in the HV20 the computer doesn't recognize anything though the drive still operates.
I get this from FCP:
"Device is not connected or the capture preset is not setup correctly. You may still log offline clips.
This might also happen if you play DV footage in an HDV device."
I get this from System Profiler:
"FireWire Bus:
Warning: Unable to list FireWire devices.
Maximum Speed: Up to 800 Mb/sec"
If your advice is to purchase a new 17" MBP, I just might since i have had it with this POS right now.

Assuming the your FCP6 setup has not changed:
Canon cameras do not play well with other devices (hard drive for example) on the same FW bus. My son had capture issues with a Canon HV30 and G-Raid 2 on a 2007 Quad Mac Pro.
The work-around:
Capture to an internal drive and move the media to the external, switch scratch disk, and reconnect media. (not ideal).
The "fix":
Purchase a FW card for the MBP Express card slot and connect one of the FW devices to it. (Each device on different FW Buses.

Macam or Parian cause capture issues???

Hello all - I've been having capture issues with my HDV stuff (Crashes during capture - I posted the details under 'Crash under HDV log and Capture' if anyone can help me out with that issue and this is slightly related...
People elsewhere say that Macam or Parian can affect Final Cut - any experiences with that? any other programs that I should avoid that could negatively affect my fcp performance?
Thanks!
- John

I'm using FCP7 on Snow Leopard.
Any idea as to what could cause fcp to crash during capture (HDV to ProRes) if it's worked more then a dozen times prior??? Any other programs could affect such things? Nothing has been installed or changed on my system in over a month.

24p advanced capture issue

hi, folks...
posing an old question that was never completely resolved because i've bumped up against it again.
here's the situation: i've shot and edited hours of footage at 24p advanced on a canon xl2. captured using 2:3:3:2 advanced pulldown removal without problems-- edited nicely into sequence.
but somewhere along the line something happened. now when i capture 24p footage and edit into the timeline i get motion blur every fourth frame (the pulldown frame?) the only way i can get a clean clip is if i capture 23.98 footage using the DV NTSC (30 fps) setting rather than 2:3:3:2 pulldown, then use the "advanced pulldown removal" feature from the tool bar after the fact (thanks patrick for this work-around).
so... situation is i can deal with this funky capture issue but it's an extra step and a pain in the rear-- anyone have any theories on how this happened and/or a permanent fix so i can shoot and capture the way fcp is supposed to work?
btw: checked the camera set-up again -- still 24p advanced, triple checked my fcp capture and sequence settings-- it's all at 2:3:3:2 pulldown removal and 23.98 as it should be. clip analysis on captured clips shows frame rate coming in at 23.98... as it should. couldn't find anything on topic in the search. appreciate thoughts. thanks much.

have you changed or downloaded anything at all that
might force the change in procedure, like a quicktime
update perchance, ipod update maybe???? just fishing
for a clue......
thanks, zeb... but no. i do remember the day things went haywire-- i captured footage off one of the reels and noticed two of five clips had captured at 29.97 instead of 23.98. it was puzzling but i went back through capture presets, sequence, etc and remember double checking and resetting all the pertinent settings before going back and recapturing the footage that had come in a 29.97. it then captured at 23.98-- but the every-fourth-frame motion blur issue cropped up at that point. and it's been happening ever since.
i know the fcp settings are correct -- i just don't get it.
fyi... i notice that as footage plays out through the firewire from the xl2, it looks fine in the camera viewfinder but i can see the motion issues on the log and capture window as it plays-- this is obvious even before initiating capture.

So many capturing issues...Can anyone help?

Hello fellow editors,
Over the past 2 weeks I have been struggling to fix my capturing issue. I have read the forums and have tried everything people have said about revlevant issues. So I ask for some help please.
I am editing on FCP 5 I use a Duel 2.0 G5 2.0 GB ram, I use 2 internal drives and 2 Lacies external. My deck is a JVC Mini DV/SVHS combo model number SR-VS30U.
So here are the issues either the deck fails to initilize or FCP sees the deck but the Preview is disabled and not allowing me to capture.
How do I fix this, I have been capturing often but just recently have started seeing all these issues.

So here are the issues either the deck fails to
initilize or FCP sees the deck but the Preview is
disabled and not allowing me to capture.
An obvious question: any adjustments - upgrades to Mac OS X, FCP, QuickTime 7 or alterations in hardware - in your system since your system decided to go AWOL on you?
Also, in terms of FireWire control, (not familiar with the exact model, so sorry if this isn't applicable) do you have device control but just not the ability to preview within the Log & Capture Window?
And do you have the ability to monitor externally? I've found that - in FCP 5 - if the deck is turned off for any reason - I shut it off once when a tape got jammed - the Log & Capture window will not be able to Preview but I was still able to Capture - and Batch Capture, at that - thanks to external monitoring.

Canon Vixia HV30 capture issue on CS6 (Mac OSX)

This might be (hopefully) something in setup, but under Mac OSX Lion (10.7.4) / Premiere CS6, i am unable to capture video from my Canon Vixia HV30 - it's either i get a monstruous noise or simply get a 'capture device offline' message.
No one ever had a similar problem even withanother cam here? I posted weeks ago but never got any reply.
Am using the same cam under Windows with Premiere CS4 and never faced such an issue.
Matter of some sort of CODEC ? Does not seem to require any specific driver for Mac based on Canon website.
Any suggestion?
Thanks,
Rob

Solved... (Almost!)
Someone pointed out that Canon has a software (they said there was no driver for Mac OS X so I had stopped looking...) But if it may help others, there is a ''CameraWindow'' for Mac OS X 10.6, 10.7 and 10.8 available.
As soon as I installed it, I could capture both from Adobe Premiere CS6 and iMovie.
One problem remaining though : the noise (feedback-like) that gets out from... the system's sound card ! (when capture is ongoing). I have to shut down the volume completely. Never had this issue under Windows, need to figure out why this happens now.
Jeff thanks again for your assistance, even though the solution was somewhere else.
If anyone has a clue for the noise issue ... please let me know
Rob

Video/Audio Capture Issue

I hope that someone has overcome this problem. I am unable to
simultaneously capture audio and video from a DV camera connected
to Windows. See
http://www.adobe.com/go/tn_16434
for details. The TechNote date is July 8, 2002 -- so almost a 5
year old problem?? Adobe, please solve this problem.
Please if anyone knows how to overcome this issue - other
than using the solution provided --- please post your information.
Thank you!
Chris Martinez

Hi
If you require technical assistance with your Focusrite product, then please raise a case with our support team:
http://global.focusrite.com/answerbase/contact
Best regards
Luke
Focusrite UK Technical Support

DVCPRO capture issues - FCP or tape issue ?

Can anyone help me rule out whether this is a tape issue or a problem with my system ?
Trying to capture from DVC PRO tapes - problem is I don't know if they are DVC PRO 25 , DVC PRO 50, or HD
(we inherited these tapes from another company, who shot them but is not being forthcoming about how they shot...)
I have a Panasonic AJ-SD93 deck hooked up to Final Cut 5.1.4 via 6pin firewire (G5)
I start playing tape with regular DV NTSC settings in Log & Capture, timecode seems to be rolling continuously, the deck display says i is DVC PRO 50 - then I hit Capture Now and I get a freeze frame, and an error message :
Capture encountered a problem reading the data on your source tape. This could be due to a problem with the tape. Capture has been aborted.
So is it the tape ?
The weird thing is I was able to capture up to about 10 min of the first tape.
Even when playing back, something changes on the tape at about 10 min - but what ? Timecode is continuous - what coudl change and make it uncapturable ?.

Did you choose the proper Easy Setup? You need to choose the Easy Setup that matches the footage, so FCP knows what sort of signal to expect. If you try capturing DVCPRO 50 as DV/NTSC, then you would get this error.
Shane

(Urgent) Sysdate issue in Oracle applications scheduler.

Hi All
I have used the query 'SELECT SYSDATE FROM DUAL' for a parameter in concurrent request. If I execute this concurrent as a single request, then it returns exact sysdate (current date) in a parameter.
If i schedule this program for daily execution using scheduler, then the sysdate is always giving value of the date when i have configured the scheduler.
For example,
My Requirement :The scheduler configured such a way that it should run everyday.Whenever it runs my query has to return the current date.
Current Issue: I schedule the scheduler on 23-Dec-2008. If it runs on 24-DEC-2008,it returns as '23-DEC-2008', If it runs on 28-DEC-2008 also,it returns as '23-DEC-2008.However If I execute this as a single request, it works fine.
Can anyone help me please,,It is very urgent.
Thanks in Advance

Hi,
I can confirm that this does work properly on 11.1.0.6 . Here is the code I used
-- create a table for output
create table job_output (log_date timestamp with time zone,
        output varchar2(4000));
begin
dbms_scheduler.create_job (
    job_name => 'myjob',job_type => 'plsql_block',
    job_action =>
'insert into job_output values(systimestamp, ''myjob runs'');',
    repeat_interval=>'freq=minutely',
    number_of_arguments => 0, enabled => true);
end;
exec dbms_lock.sleep(130);
select * from job_output order by log_date ;The table job_output clearly shows dates increasing by one minute every run. If you use "freq=daily" instead then the job will run once a day instead of once a minute.
Does this example work for you ? If not could you post output from the job_output table and tell us what version database you are using.
Thanks,
Ravi.

Capturing Issues

Setup:
Mac Pro 2X2.26 Ghz Quad Core Xeon
Mac OSX v. 10.6.5
FCP: v. 7.0.3
AJA Kona LHi Capture Card
AJA KLHi Breakout Box
Problem: Whenever I capture anything through my AJA Kona LHi Capture Card, I have an issue of a thin strip of distorted lines at the top of the capture screen and a thin black strip on the right of the capture screen. Why it is capturing this along with the footage is the question. In order to prevent the those areas from showing up on the final product, I have to zoom the footage somewhat outside of the frame which lowers the quality of the footage. Below are screenshots of what I am describing as well as screenshots of my capture and sequence settings.
/Users/editor/Desktop/Canvus FCP Issue.jpg
/Users/editor/Desktop/Capture Setting FCP Issue.jpg
/Users/editor/Desktop/Sequence Settings.jpg

double post
see here
http://discussions.apple.com/thread.jspa?threadID=2670026&tstart=0

[GeForceFX] PS FX 5200 Capture Issue - Still

"I am using NVIDIA FX5200 PERSONAL CINEMA V128 on WINDOWS 2000,
and i am getting the following error when i try to capture video
WinDVR
Overlay in not available
lower resolution, color depth &/or refresh rate
or enable video mirror if using twin view clone/extended mode
I have tried lowering everything but still get the error
What is overlay? ?("
I'm having this same issue. I've heard the included software is the cause (read below) and I replaced it with Ulead software and get the same error message.
My Box is an Intel P4 2.2 on an Intel 8x MB with 256 MB DDR using Windows 2000 Pro V5. Directx 9.0b.
I'm contacted MSI and they said to wipe clean the install and reinstall 6.1.7.7 drivers. Did that. No change, same error.
So before I recommend to the entire world not to buy MSI products, I'd like an actual solution. I see it works for other people.

I purposely didn't include my 3DMark03 results on account of how sorry they were!!!lol_anim:
The best score I could acheive was 1,517 3DMarks.
The fact that these benchmark game's framerates are so crappy is odd, since I can play most current games with nary a problem.
(except for the aforementioned Halo)
Medal of Honor, UT2003, Unreal II, Jedi Outcast, Splinter Cell, etc....
Oh well....
OOPS!!!!
**I was mistakenly benchmarking with 3DMark2001 (Build 200) before**
This was the reason for my score of 9,160 3DMarks.
Sorry for the bad info!
My 3DMark2001SE (Build 300) scores are as follows:
7,884 3DMarks - Stock CPU/FSB/RAM (133Mhz x 10.5)
8,666 3DMarks - Overclocked
BTW, thanks for the tip Jbaroli.
I can in fact increase all my overclocks, but I find that my current settings achieve the best balance of stability and video quality for me.
On the other hand I have a whole host of ideas for better cooling that should allow me to squeeze out some more performance!!!
AMD Athlon 1700+ (JIUHB o'cd to 2.1Ghz 183x11.5)
MSI KT3V (BIOS Tweaked to MAX!!!)
Corsair PC-2700 512MB (o'cd to 366Mhz)
MSI FX5200 TD128 (GPU o'cd to 286Mhz RAM o'cd to 542Mhz)
Western Digital 40GB 7200RPM 8MB
Lite-On 48x CD-RW
Antec 350W PSU
ThermalRight AX-7 Heatsink
ThermalTake SmartFan 2
Artic Silver Ceramique
Windows XP Home (Not completely tweaked for gaming, but some....)

No preview during capture issue

Hi - I have Adobe Premiere setup to show me the video while it's capturing it form my camcorder, but for some reason it only shows the first frame at that's it. it does capture it correctly. What could be the issue?
Thanks,
Roberto

Hmm. I've not yet seen this issue under these conditions. The Scenalyzer suggestion may be worth investigation. WinDV is another capture utility, not quite as feature rich as Scenalyzer, but it is free.

8330 Video capturing issues

Hi,
I got a 8330 yesterday and I am having issues recording a video.
After a master reset, the capturing works fine.
As soon as I change the encryption mode under 'options/media card', the phone
does not let me capture videos anymore, even after I changed the options back to default!
Every time I try to record a video, it shows a '0KB' size at the lower left corner.
I've swapped the memory cards and even the phone with no results.
After a master reset, I can record again until I change the media card options...
Any advice is greatly appreciated!

resc wrote:
Can the data on the card be accessed via another BB if the encryption option is turned off?
Nope. You will not be able to access the files from anything other than the BlackBerry used to encrypt the data. This includes your PC, another BlackBerry, or even your BlackBerry if you happen to wipe or upgrade the OS.

Capturing issues: Disc is full

OK, I'm only having this problem with one of my Macs so not really sure what's causing the issue. Everytime I try to capture on that specific machine I get Disc is Full error and it cancels the capturing. Of course, the reason why I'm posting this is because the disc isn't full and no where near it.
OS: Leopard
FCP: I've tried it with both the most updated 5 and 5.1 (i wiped out the newest 5 and reinstalled 5.1)
Message was edited by: djricekcn

Hi djricekcn!
Don´t get me wrong... what disk are you using? Of course you´re not using system disk! (i had the same question from a friend of mine, and he was capturing for the full system disk!)
When you say "capture", you´re capturing a logged clip or capture now? I gad a client that gave me a clip to log, but he entered a wrong timecode so the clip had 23 hours... of course there was no space to capture and didn´t capture at all!
HBars

URGENT: Capture Issue

Similar Messages

Maybe you are looking for