[URGENT]Error in OWSM gateway.

Hi Mathias ,
Oracle SOA suite version: 10.1.3.1.0
I started the OWSM with the quick start tutorial. Instead of using the time service I used another service deployed. When I started I had created a gateway which I then deleted.
Then I created a new gateway and done the steps specified by the tutorial.
The problem is occuring when I try to access the proxy wsdl url.
It giving an error :-
Oracle Web Services Manager Gateway C0003001: Cannot find WSDL for service "SID0003006"
I have updated the gateway.component.id with C0003007 the next possible component ID in gateway-config-installer.properties located in OH/owsm/config/gateway and then redeployed the gateway successfully.Now I am getting a little bit different error :
Oracle Web Services Manager Gateway : Cannot find WSDL for service "SID0003007"
I deleted all other gateways and this is the only gateway remaining.
Please tell me another way to fix this.
Thanks and Regards,
Vargab Pathak

To debug the problem, bump up the log level as mentioned in this post http://ws-security.blogspot.com/2007/04/howto-10131-owsm-change-log-level.html
Try to see if the detailed logs help in resolving the problem.
Vikas

Similar Messages

  • Error When Sending Service Request Through OWSM Gateway

    We are trying to test using OWSM Gateways and Server Agents to sign and then verify messages being passed to a web service on a server. We have been able to get this to work with a simple HelloWorld type service without any problems. We then followed the exact same steps to do this with an actual service and it is not working.
    We run the test from the "Test Page" inside the ccore GUI. We first test the connection directly to the service and receive a message about it missing the WS Security header. This is somewhat expected. Then, we send through the gateway which is set up to sign the message and pass along the header and receive the same error message:
    <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"><env:Header/><env:Body><env:Fault xmlns="http://schemas.oblix.com/ws/2003/08/Faults"><faultcode xmlns="">:GenericFault</faultcode><faultstring xmlns="">WS-Security process failure:FAULT CODE: InvalidSecurity FAULT MESSAGE: Missing WS Security header in the SOAP message</faultstring><faultactor xmlns=""></faultactor></env:Fault></env:Body></env:Envelope>
    We have checked the OWSM logs and can see that both times the server agent receives the request. The gateway logs, however, do not show any requests or responses even though the message should have gone through it. We do see these messages in the logs when testing our HelloWorld service with the same sign/verify settings. A review of the gateway.log file shows the following message displayed each time we submit a test to the malfunctioning service:
    2007-10-18 10:30:22,263 INFO [AJPRequestHandler-HTTPThreadGroup-54] gateway.WSDLRegistry - Exception occured in updateWSDL
    We have until tomorrow to get this issue resolved before development presses to move forward without OWSM security and we cannot have that. Your immediate assistance is required. Thank you.

    Some additional research has been done here and it seems that web services created with SOAP 1.1 (such as the HelloWorld service) work just fine. The problem is with services created with SOAP 1.2. Are there separate configurations or changes that need to be made for SOAP 1.2 services?

  • OWSM GATEWAY PROBLEM .xsd error

    Hi,
    I am working on OWSM gateways.I deployed a mail web service and tried to virtualise it using OWSM gateways. I have registered the service . When i use the link for service wsdl generated by OWSM in internet explorer i can see the wsdl file but when do the same using test page in OWSM i get the following error.
    java.io.IOException: The document 'http://localhost:8888/gateway/services/alshirawiMail.xsd' contains HTML tags.
    Also i have only tried with web services but when i try to virtualise THE WHOLE BPEL PROCESS i get error like
    java.io.IOException: The document 'http://localhost:8888/gateway/services/rule_doesnot_work.xsd' contains HTML tags.
    Please reply.
    Thanks and regards.
    Vishnu
    Message was edited by:
    user607746

    Hi
    The problem with xsd resolved but now when i invoke the service from test page i am getting this error.
    <env:Envelope
    xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">null
    <env:Body>
    <env:Fault
    xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
    <faultcode>env:Server</faultcode>
    <faultstring>ORABPEL-08021 Cannot find partner wsdl. parnterLink "OWSM_SYNC_BPEL_PROCESS" is not found in process "OWSM_SYNC_BPEL_PROCESS" (revision "1.0") Please check the deployment descriptor of the process to find the correct partnerLink name. </faultstring>
    null</env:Fault>
    </env:Body>
    </env:Envelope>

  • OWSM gateway : Message not encrypted error

    Hi,
    I have a BPEL process which invokes a web service via partner link. Both BPEL and service are secured with OWSM gateway.In the policy defined for BPEL I'm doing Sign Message And Encrypt using XPath expression( which is working). In the policy for webservice I'm doing a Decrypt and Verify Signature . But its not invoking the service and throws a Client:GenericFault saying Message is not encrypted.
    In fact the logs from BPEL after encryption shows encrypted data. But logs in service does not contain the same data.
    Am I doing something wrong? Should I copy something ? I'm using the same keystore for both the policies. The version is 10.1.3.1
    Please help me
    Thanks
    Meer

    All of them are running with Win XP SP2 at work. NAT-Traversal: is Disabled. DMZ is enabled. Thanks

  • Unable to acess BPEL WSDL from OWSM Gateway

    Hello all,
    I'm trying to register a BPEL Process as a service on a OWSM gateway.
    The BPEL WSLD is as follows:
    <definitions name="WR01" targetNamespace="http://xmlns.oracle.com/WR01">
    −
         <types>
    −
         <schema attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://xmlns.oracle.com/WR01">
    −
         <element name="WR01ProcessRequest">
    −
         <complexType>
    −
         <sequence>
    <element name="input" type="string"/>
    </sequence>
    </complexType>
    </element>
    −
         <element name="WR01ProcessResponse">
    −
         <complexType>
    −
         <sequence>
    <element name="result" type="string"/>
    </sequence>
    </complexType>
    </element>
    </schema>
    −
         <xsd:schema>
    <xsd:import namespace="http://xmlns.oracle.com/pcbpel/adapter/db/top/WR01" schemaLocation="WR01.xsd"/>
    </xsd:schema>
    </types>
    −
         <message name="WR01RequestMessage">
    <part name="payload" element="ns1:Input"/>
    </message>
    −
         <message name="WR01ResponseMessage">
    <part name="payload" element="ns1:Input"/>
    </message>
    −
         <portType name="WR01">
    −
         <operation name="process">
    <input message="tns:WR01RequestMessage"/>
    <output message="tns:WR01ResponseMessage"/>
    </operation>
    </portType>
    −
         <binding name="WR01Binding" type="tns:WR01">
    <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
    −
         <operation name="process">
    <soap:operation style="document" soapAction="process"/>
    −
         <input>
    <soap:body use="literal"/>
    </input>
    −
         <output>
    <soap:body use="literal"/>
    </output>
    </operation>
    </binding>
    −
         <service name="WR01">
    −
         <port name="WR01Port" binding="tns:WR01Binding">
    <soap:address location="http://dcmsinusapp02.dc.local:7780/orabpel/default/WR01/1.0"/>
    </port>
    </service>
    −
         <plnk:partnerLinkType name="WR01">
    −
         <plnk:role name="WR01Provider">
    <plnk:portType name="tns:WR01"/>
    </plnk:role>
    </plnk:partnerLinkType>
    </definitions>
    The WSDL generated from the service registation on the gateway is as follows:
    <definitions name="WR01" targetNamespace="http://xmlns.oracle.com/WR01">
    −
         <types>
    −
         <schema attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://xmlns.oracle.com/WR01">
    −
         <element name="WR01ProcessRequest">
    −
         <complexType>
    −
         <sequence>
    <element name="input" type="string"/>
    </sequence>
    </complexType>
    </element>
    −
         <element name="WR01ProcessResponse">
    −
         <complexType>
    −
         <sequence>
    <element name="result" type="string"/>
    </sequence>
    </complexType>
    </element>
    </schema>
    −
         <xsd:schema>
    <xsd:import namespace="http://xmlns.oracle.com/pcbpel/adapter/db/top/WR01" schemaLocation="WR01.xsd"/>
    </xsd:schema>
    </types>
    −
         <message name="WR01RequestMessage">
    <part name="payload" element="ns1:Input"/>
    </message>
    −
         <message name="WR01ResponseMessage">
    <part name="payload" element="ns1:Input"/>
    </message>
    −
         <portType name="WR01">
    −
         <operation name="process">
    <input message="tns:WR01RequestMessage"/>
    <output message="tns:WR01ResponseMessage"/>
    </operation>
    </portType>
    −
         <binding name="WR01Binding" type="tns:WR01">
    <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
    −
         <operation name="process">
    <soap:operation style="document" soapAction="process"/>
    −
         <input>
    <soap:body use="literal"/>
    </input>
    −
         <output>
    <soap:body use="literal"/>
    </output>
    </operation>
    </binding>
    −
         <service name="WR01">
    −
         <port name="WR01Port" binding="tns:WR01Binding">
    <soap:address location="http://dcmsinusapp02.dc.local:7780/gateway/services/SID0003002"/>
    </port>
    </service>
    −
         <plnk:partnerLinkType name="WR01">
    −
         <plnk:role name="WR01Provider">
    <plnk:portType name="tns:WR01"/>
    </plnk:role>
    </plnk:partnerLinkType>
    </definitions>
    When i test the acess using OWSM console or try and consume it on JDeveloper I get the following error:
    java.io.IOException: The document 'http://dcmsinusapp02.dc.local:7780/gateway/services/WR01.xsd' contains HTML tags.
    Reason is:
    404 Not Found
    OracleJSP: java.io.FileNotFoundException:
    Set the init-param debug_mode to "true" to see the complete exception message
    This file not found exception is related to /gateway/services/WR01.xsd of course.
    I've mostly followed the OWSM documentation in order to register the service.
    Am I doing anything wrong referencing xsd's or something similar?
    Thanks in advance

    Answer to my own question:
    BPEL processes exposed via OWSM can't be used from JDEV ws proxy generator
    But the real question is: how do I prevent relative paths to xsd's on bpel wsdl?
    Any pointers?
    Thanks

  • SOS~!!!About OWSM Gateway Question

    Hi,
    I've used the OWSM (SOA SUITE 10.1.3.1-linux)to do the following:
    1) Created a Gateway Component
    2)set policy
    3)Registered a Service
    4)Commited the policy
    Service URL: http://b.cn.oracle.com:3115/gateway/services/SID0003004
    Service WSDL URL: http://b.cn.oracle.com:3115/gateway/services/SID0003004?wsdl
    I can access my original service,however failed by it.
    the error info is "Oracle Web Services Manager Gateway C0003001: No policies found for service "SID0003004". Make sure the service is registered correctly and the gateway policies are up to date."

    Hi,
    Take a look at Re: OWSM gateway issue It might help.
    Regards,
    Mathias

  • Error while installing gateway please help soon

    Error while installing gateway in
    Microsoft Windows Server 2003.
    error while installing gateway
    E:\idm\gateway>gateway -i
    10/02/2008 15.13.38.015000 [4972] (../../../../src/wps/agent/logging/WSTrace.cpp
    ,150): trace active, level: 4, file: E:\\IDMLOGS\\gateway.log, maxSize: 10240 KB
    10/02/2008 15.13.38.015000 [4972] (../../../../src/wps/agent/logging/WSTrace.cpp
    ,108): In WSTrace::init()
    10/02/2008 15.13.38.015000 [4972] (../../../../src/wps/agent/logging/WSTrace.cpp
    ,109): Gateway version: 'Sun Java System Identity Manager 7.1'
    10/02/2008 15.13.38.015000 [4972] (../../../../src/wps/agent/logging/WSTrace.cpp
    ,110): OS version: 'Windows Server 2003 Family Service Pack 1 (Build 3790)'
    An error occured when trying to install the service: No error
    E:\idm\gateway>

    Use that MS installer cleanup to get rid of iTunes first, then QuickTime.
    Actually, I should back up. Go to the article I link below, and scroll down to the section
    *General Installation Troubleshooting*
    Important: A majority of customers experience successful iTunes installation after completing these troubleshooting procedures. If one does not help, proceed to the next.
    -Completely Remove iTunes and QuickTime (Click to show)
    -Empty your Temp directory and restart (Click for more)
    -Clean up iTunes installer files on the computer (Click for more)
    -Download QuickTime Standalone Installer (Click for more)
    -Disable other conflicting software (Click for more)
    -Make sure your folder names don't contain strange characters (Click for more)
    http://docs.info.apple.com/article.html?artnum=93976

  • Error occurred in deployment step 'Uninstall app for SharePoint': The remote server returned an error: (502) Bad Gateway.

    Installed SP 2013 Foundation in my Hyper-V machine
    Created and done all the steps mentioned here http://blogs.msdn.com/b/shariq/archive/2013/05/07/how-to-set-up-high-trust-apps-for-sharepoint-2013-amp-troubleshooting-tips.aspx && http://msdn.microsoft.com/en-us/library/office/fp179901%28v=office.15%29.aspx
    for self signed certificate
    copied those two certificates in my local machine(base machine) D drive
    (D:\Cert)
    Both VM and base machine are in same domain
    Installed VS 2013 in my base machine and create a Provided hosted app with the copied certificates, (For creation i followed the above mentioned URL)
    Just created and hit F5 to run in my base machine, but getting this error
    Error occurred in deployment step 'Uninstall app for SharePoint': The remote server returned an error: (502) Bad Gateway.
    Please help me to resolve this issue, trying to figure out from last 2 days
    Thanks in Advance
    Arun

    Hi Harminder,
    This happens because an app has already been deployed and you are deploying it again using the same version.
    Resolution:
    Open the AppManifest.xml file and change the version.
    Vivek Jagga - MCTS SharePoint
    SharePointExcellence

  • Use Service URL from OWSM Gateway in Service Registry

    Hi,
    Is there a scenario in which the Service URL from the OWSM gateway is used in the UDDI registry?
    Eg:
    WebService <--------> OWSM Gateway <----------> OSR (UDDI)
    Any information on this is much appreciated
    Regards

    Hi Vikas,
    Well..you don't registrate a gateway in uddi.
    When you registrate a service in owsm, it will generate a new wsdl for you. This wsdl you just need to registrate in uddi just like any other service with wsdl-interface.
    So the authentication fields aren't in uddi configered either...those are just a policy step in owsm. Overthere you can decide how to propegate the values of username/password etc

  • URGENT : Error: nca_connect_server: cannot communicate host ...on port....

    URGENT : Error: nca_connect_server: cannot communicate host ...on port....
    Platform :
    front end - Forms6i
    App Server - Oracle 9iAS
    Testing tool - Mercurry Load Runner 8.0
    Database - Oracle 9i
    Hi Gurus,
    I am trying to run a script in Load runner but its always coming out by following error message -
    vuser_init.c(63): Warning: ifError expired (5) during NCA handshake,
    vuser_init.c(63): Warning: ifError expired (5)
    vuser_init.c(63): Error: nca_connect_server: cannot communicate with host 202.46.209.42 on port 7778
    Abort was called from an action.
    forms url which used in test script is running fine without any error with same port, I am wondering why it is returning error with Load Runner ?
    Quick help on pinpointing the issue will be highly appreciated, Following is the Loadrunner script m using -
    vuser_init()
         web_set_max_html_param_len("1024");
         web_url("f6isrvl",
              "URL=http://202.46.209.42:7778/f6i/f6isrvl?config=devjp10_en",
              "Resource=0",
              "RecContentType=text/html",
              "Referer=",
              "Snapshot=t1.inf",
              "Mode=HTML",
              EXTRARES,
              "Url=../forms60java/f60web.jar", "Referer=", ENDITEM,
              "Url=../forms60java/FImageBean.jar", "Referer=", ENDITEM,
              "Url=../forms60java/images.jar", "Referer=", ENDITEM,
              LAST);
         web_url("Registry.dat",
              "URL=http://202.46.209.42:7778/forms60java/oracle/forms/registry/Registry.dat",
              "Resource=0",
              "RecContentType=text/plain",
              "Referer=",
              "Snapshot=t2.inf",
              "Mode=HTML",
              LAST);
         web_reg_save_param("NCAJServSessionId",
              "LB=",
              "RB=",
              "Search=Noresource",
              LAST);
         web_url("f6isrvl_2",
              "URL=http://202.46.209.42:7778/f6i/f6isrvl?config=devjp10_en&acceptLanguage=en-us&ifcmd=startsession",
              "Resource=0",
              "RecContentType=text/plain",
              "Referer=",
              "Snapshot=t3.inf",
              "Mode=HTML",
              EXTRARES,
              "Url=f6ilsnr/?JServSessionIdf6i=i7yjfl33c1.f45nez95eiGIpR1vp2TD/knGnluImQXHcALJmQ5Go6XNr3CSa30R&ifcmd=getinfo&ifhost=MILDH0417&ifip=10.81.6.127", "Referer=", ENDITEM,
              "Url=../forms60java/oracle/ewt/dataSource/OneDDataSourceListener.class", "Referer=", ENDITEM,
              "Url=../forms60java/oracle/ewt/dataSource/OneDDataSource.class", "Referer=", ENDITEM,
              "Url=../forms60java/oracle/ewt/dataSource/ArrayOneDDataSource.class", "Referer=", ENDITEM,
              "Url=../forms60java/oracle/ewt/dataSource/AbstractOneDDataSource.class", "Referer=", ENDITEM,
              "Url=../forms60java/oracle/ewt/dataSource/OneDDataSourceAdapter.class", "Referer=", ENDITEM,
              "Url=../forms60java/oracle/ewt/dataSource/OneDDataSourceEvent.class", "Referer=", ENDITEM,
              LAST);
         nca_set_connect_opt(SCALE_INFO, 8, 20);
         nca_set_connect_opt(REQUIRED_LIST, 0);
         nca_connect_server("202.46.209.42", "7778", "module=ulgprc_em_100_01_c.fmx userid=dbk/dbk@dbkls05 ORA_USER=devjp10 USR_LANG=ENG");
         nca_set_window("Login");
         nca_edit_set("27", "SSC");
         nca_obj_type("27", '\t', 0);
         nca_edit_set("30", lr_decrypt("44b61ad9b8d2295c3768adc952f4"));
         nca_button_press("32");
         nca_message_box_press("Forms", 2);
         nca_menu_select_item("SSC", "Lending;Underwriting");
         nca_set_window(" (Underwriting)(Pending Request : 0)");
         nca_button_set("386", 1);
         nca_menu_select_item(" (Underwriting)(Pending Request : 0)", "Edit;Exit");
         nca_set_window("SSC");
         nca_menu_select_item("SSC", "File;Exit");
         return 0;
    Execution Log
    Virtual User Script started
    Starting action vuser_init.
    vuser_init.c(12): web_set_max_html_param_len was successful      [MsgId: MMSG-26392]
    vuser_init.c(14): Downloading resource "http://202.46.209.42:7778/forms60java/f60web.jar" (specified by argument number 9)      [MsgId: MMSG-26577]
    vuser_init.c(14): Downloading resource "http://202.46.209.42:7778/forms60java/FImageBean.jar" (specified by argument number 12)      [MsgId: MMSG-26577]
    vuser_init.c(14): Downloading resource "http://202.46.209.42:7778/forms60java/images.jar" (specified by argument number 15)      [MsgId: MMSG-26577]
    vuser_init.c(14): web_url("f6isrvl") was successful, 1882891 body bytes, 1386 header bytes, 12 chunking overhead bytes      [MsgId: MMSG-26385]
    vuser_init.c(27): web_url("Registry.dat") was successful, 4117 body bytes, 367 header bytes      [MsgId: MMSG-26386]
    vuser_init.c(36): Registering web_reg_save_param was successful      [MsgId: MMSG-26390]
    vuser_init.c(42): Downloading resource "http://202.46.209.42:7778/f6i/f6ilsnr/?JServSessionIdf6i=i7yjfl33c1.f45nez95eiGIpR1vp2TD/knGnluImQXHcALJmQ5Go6XNr3CSa30R&ifcmd=getinfo&ifhost=MILDH0417&ifip=10.81.6.127" (specified by argument number 9)      [MsgId: MMSG-26577]
    vuser_init.c(42): Downloading resource "http://202.46.209.42:7778/forms60java/oracle/ewt/dataSource/OneDDataSourceListener.class" (specified by argument number 12)      [MsgId: MMSG-26577]
    vuser_init.c(42): Downloading resource "http://202.46.209.42:7778/forms60java/oracle/ewt/dataSource/OneDDataSource.class" (specified by argument number 15)      [MsgId: MMSG-26577]
    vuser_init.c(42): Downloading resource "http://202.46.209.42:7778/forms60java/oracle/ewt/dataSource/ArrayOneDDataSource.class" (specified by argument number 18)      [MsgId: MMSG-26577]
    vuser_init.c(42): Downloading resource "http://202.46.209.42:7778/forms60java/oracle/ewt/dataSource/AbstractOneDDataSource.class" (specified by argument number 21)      [MsgId: MMSG-26577]
    vuser_init.c(42): Downloading resource "http://202.46.209.42:7778/forms60java/oracle/ewt/dataSource/OneDDataSourceAdapter.class" (specified by argument number 24)      [MsgId: MMSG-26577]
    vuser_init.c(42): Downloading resource "http://202.46.209.42:7778/forms60java/oracle/ewt/dataSource/OneDDataSourceEvent.class" (specified by argument number 27)      [MsgId: MMSG-26577]
    vuser_init.c(42): Warning -26652: Response body length (96) does not match the Content-Length header specification (95) for "http://202.46.209.42:7778/f6i/f6isrvl?config=devjp10_en&acceptLanguage=en-us&ifcmd=startsession"      [MsgId: MWAR-26652]
    vuser_init.c(42): web_url("f6isrvl_2") highest severity level was "warning", 4459 body bytes, 3017 header bytes      [MsgId: MMSG-26388]
    vuser_init.c(59): nca_set_connect_opt("SCALE_INFO")
    vuser_init.c(61): nca_set_connect_opt("REQUIRED_LIST")
    vuser_init.c(63): Warning: ifError expired (5) during NCA handshake,
    vuser_init.c(63): Warning: ifError expired (5)
    vuser_init.c(63): Error: nca_connect_server: cannot communicate with host 202.46.209.42 on port 7778
    Abort was called from an action.
    TIA,
    Sheilesh

    Well, the obvious question is what does 'mail.wbe-pli.com' translate to on the machine?
    Does it translate to your public IP address, in which case your traffic has to go out through your router and come back in? In addition to not being ideal, that's also not supported by a number of different routers (they can't handle NAT traffic coming back in from the private network).
    In most cases the solution is to setup internal DNS so that your hostname maps to the internal address of your server, not the external one.
    In this case, though, you could also configure Mail.app to use 'localhost' for the mail server, rather than 'mail.wbe-pli.com'. That will enable it to talk to the server running on the local system.

  • Risport Service: The remote server returned an error: (502) Bad Gateway

    Hi All.
    I am using the CUCM (System version: 6.1.3.2000-1) Risport function to get device information.
    When trying to connect to the service (https://<CUCM_IP>:8443/realtimeservice/services/RisPort) I receive the folowing error:
    The remote server returned an error: (502) Bad Gateway
    When entering the same URL into the browser on the same application server I get a Security Alert, user prompt and eventually the expected screen. So the service is running, but somhow I can not connect to it using the application.
    Does anyone know how to solve this?
    Thanks in advance

    It is an C#.NET Windows Service.
    I have solved "the problem". The service was running with "local system account". That user did not had the right proxy rights to connect to the CUCM service.
    So I changed the Windows Service user to the account that I use to login on that machine (with the right proxy rights) and now it is working ;-)
    I figured this out because when I logged into that machine, with my account, I could connect to the CUCM service without any problems with my browser.

  • Error while running gateway approval tool (SCOM 2012)

    We get an error saying "The gateway server does not exist: <GW server name>" while running gateway approval tool in SCOM 2012 MS. referred several blogs, but no help. MS servers are in healthy state and Ops DB has enough free space.
    Port 5723 is the only port open between GW and SCOM MS servers. Could anyone assist with a solution pls?

    Did you first install SCOM gateway server role on that GW Server. are the certificates installed properly.
    Also please confirm that the GW server name exists in AD too.
    Please check that GW server does not already exists in SCOM as a computer object. Check the SCOM database too for any stale entry of the GW Server.
    Once the above are clear. Then you can run the gateway approval tool with action =delete.
    After that again try to run the gateway approval tool with action =create.
    Hope this helps.
    Thanks, S K Agrawal

  • HTTP Error 502: Bad Gateway

    Whenever I try to download a new ringtone or even get on t-zones for that matter, this message always comes up that says HTTP Error 502: Bad Gateway. What does this mean? How do I fix it? This is really annoying!!!!

    Hi,
    Can  anyone help me  how to  read my email from blackberry  pearl 8120 model, when try to open it shows HTTP error 502 bad gateway  and how to rectify the problems.
    ramlaks
    ramlaks

  • OWSM Gateway intercept by URL

    Hi everybody. As I'm diving deeper into OWSM (10.1.3) the question is raised: is it possible to install OWSM Gateway and configure it in the way that this gateway will listen not only on gateway URL (generated from Register Service) but also on original service endpoint without having changed all my client code to point to gateway URL instead of original service endpoint. If this is not possible then how to prevend client apps from calling service endpoint directly?
    Edited by: Baan, Jos on 23-feb-2010 15:56

    Can anyone post any help from Oracle?

  • OWSM: Gateway is not ready to process requests

    OWSM: Gateway is not ready to process requests
    After I registered a service in a gateway with OWSM and when I intialize a client call using gateway virtualized URL fro BPEL, the first time call I always get the following fault. It is like a "wake-up" call. I had to initialize second call imediately following the first call get through gateway.
    Can anyone help me to figure out how to keep the OWSM Gateway "awake" all the time and avoid first call gateway failure?
    Thanks
    <fault>
    -<remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
    -<part name="code">
    <code>Client.GenericFault
    </code>
    </part>
    -<part name="summary">
    <summary>Gateway is not ready to process requests
    </summary>
    </part>
    -<part name="detail">
    <detail>
    <detail/>
    </detail>
    </part>
    </remoteFault>
    </fault>

    Can anyone post any help from Oracle?

Maybe you are looking for

  • Need inputs to develop a scenario?

    Hello All, My requirement is like this. Iam picking text file from one bank system and placing the file at the client system at work folder.i have not used IR part as no mapping required just to pick the text file and place at the work folder. one ab

  • Pages with flash crash Safari

    I'm having an issue with the Safari 4 beta where as soon as I visit a site that uses flash, the browser completely locks up and I have to force quit it. I have updated flash to the latest version but not even that solved my problem. Any help would be

  • New widescreen monitor distorts images

    I am in the process of setting up and learning to use my new widescreen Samsung T260HD monitor with ATI Radeon Graphics card. Having worked on hundreds of photos in Photoshop and PSElements using a traditional 3x4 aspect ratio monitor, when I view my

  • How do you make audio fast without changing pitch?

    How do you make audio fast without changing pitch?

  • AVCHD Renamed becomes a useless folder! How do I get my Video Content to read?

    I renamed the file named "AVCHD" after transferring it from my camera to my HD. Now, when I pull up it's info, it says that it is a folder, rather than "AVCHD Content." Quicktime won't open it or any of the files in the folder, and FCP X won't recogn