OWSM Gateway intercept by URL

Hi everybody. As I'm diving deeper into OWSM (10.1.3) the question is raised: is it possible to install OWSM Gateway and configure it in the way that this gateway will listen not only on gateway URL (generated from Register Service) but also on original service endpoint without having changed all my client code to point to gateway URL instead of original service endpoint. If this is not possible then how to prevend client apps from calling service endpoint directly?
Edited by: Baan, Jos on 23-feb-2010 15:56

Can anyone post any help from Oracle?

Similar Messages

OWSM friendly service endpoint URL

I am planning to use OWSM to ensure security requirements in my systems, but OWSM Gateway generates endpoint URL's as:
http://<server>:<port>/gateway/services/SID000xxxx
Is there some way to provide a more friendly endpoint URL to my protected services ?
Thanks,
Schiroky

When you initially registered the service you also gave it a name. It can also be referred to by this name instead of the generated name. For example,
http://<server>:<port>/gateway/services/myservice
Which also has a generated id of:
http://<server>:<port>/gateway/services/SID0003003

Use Service URL from OWSM Gateway in Service Registry

Hi,
Is there a scenario in which the Service URL from the OWSM gateway is used in the UDDI registry?
Eg:
WebService <--------> OWSM Gateway <----------> OSR (UDDI)
Any information on this is much appreciated
Regards

Hi Vikas,
Well..you don't registrate a gateway in uddi.
When you registrate a service in owsm, it will generate a new wsdl for you. This wsdl you just need to registrate in uddi just like any other service with wsdl-interface.
So the authentication fields aren't in uddi configered either...those are just a policy step in owsm. Overthere you can decide how to propegate the values of username/password etc

Help regarding how to instantiate the failed over URLS in OWSM gateway.

Hi all,
I am working on a scenario like...
I have a webserviceAA which takes ID and Name and dumps it into a tableAA.This service is registered with the OWSM gateway.While registering the service, "in the failover URL" section, I will give the end point of another webserviceBB, which performs the same functionality as webserviceAA does.
Once I register the service, I remove the tableAA from my database.
Then I will test the wsdl of webserviceAA using the console's test page.
Obviously, the gateway tries to invoke the webserviceAA, but fails to insert ID and Name in to the table as the table is dropped. Now my gateway goes to the "failoverURLs" and tries to instantiate webserviceBB(takes ID and Name and inserts them into tableBB).
I am able to see that the webserviceBB is getting instantiated in my BPEL Console, but thing is like the gateway is not able to pass ID and Name to the webserviceBB.....
Can any one tell me .. how do I pass values to failed over webservices.......
Hope most of you have tried out with this....
Thanks .....
Manoj Nair....

exact same problem. Any solution out there?

OWSM: Gateway is not ready to process requests

OWSM: Gateway is not ready to process requests
After I registered a service in a gateway with OWSM and when I intialize a client call using gateway virtualized URL fro BPEL, the first time call I always get the following fault. It is like a "wake-up" call. I had to initialize second call imediately following the first call get through gateway.
Can anyone help me to figure out how to keep the OWSM Gateway "awake" all the time and avoid first call gateway failure?
Thanks
<fault>
-<remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
-<part name="code">
<code>Client.GenericFault
</code>
</part>
-<part name="summary">
<summary>Gateway is not ready to process requests
</summary>
</part>
-<part name="detail">
<detail>
<detail/>
</detail>
</part>
</remoteFault>
</fault>

Can anyone post any help from Oracle?

SOS~!!!About OWSM Gateway Question

Hi,
I've used the OWSM (SOA SUITE 10.1.3.1-linux)to do the following:
1) Created a Gateway Component
2)set policy
3)Registered a Service
4)Commited the policy
Service URL: http://b.cn.oracle.com:3115/gateway/services/SID0003004
Service WSDL URL: http://b.cn.oracle.com:3115/gateway/services/SID0003004?wsdl
I can access my original service,however failed by it.
the error info is "Oracle Web Services Manager Gateway C0003001: No policies found for service "SID0003004". Make sure the service is registered correctly and the gateway policies are up to date."

Hi,
Take a look at Re: OWSM gateway issue It might help.
Regards,
Mathias

Unable to acess BPEL WSDL from OWSM Gateway

Hello all,
I'm trying to register a BPEL Process as a service on a OWSM gateway.
The BPEL WSLD is as follows:
<definitions name="WR01" targetNamespace="http://xmlns.oracle.com/WR01">
−
     <types>
−
     <schema attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://xmlns.oracle.com/WR01">
−
     <element name="WR01ProcessRequest">
−
     <complexType>
−
     <sequence>
<element name="input" type="string"/>
</sequence>
</complexType>
</element>
−
     <element name="WR01ProcessResponse">
−
     <complexType>
−
     <sequence>
<element name="result" type="string"/>
</sequence>
</complexType>
</element>
</schema>
−
     <xsd:schema>
<xsd:import namespace="http://xmlns.oracle.com/pcbpel/adapter/db/top/WR01" schemaLocation="WR01.xsd"/>
</xsd:schema>
</types>
−
     <message name="WR01RequestMessage">
<part name="payload" element="ns1:Input"/>
</message>
−
     <message name="WR01ResponseMessage">
<part name="payload" element="ns1:Input"/>
</message>
−
     <portType name="WR01">
−
     <operation name="process">
<input message="tns:WR01RequestMessage"/>
<output message="tns:WR01ResponseMessage"/>
</operation>
</portType>
−
     <binding name="WR01Binding" type="tns:WR01">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
−
     <operation name="process">
<soap:operation style="document" soapAction="process"/>
−
     <input>
<soap:body use="literal"/>
</input>
−
     <output>
<soap:body use="literal"/>
</output>
</operation>
</binding>
−
     <service name="WR01">
−
     <port name="WR01Port" binding="tns:WR01Binding">
<soap:address location="http://dcmsinusapp02.dc.local:7780/orabpel/default/WR01/1.0"/>
</port>
</service>
−
     <plnk:partnerLinkType name="WR01">
−
     <plnk:role name="WR01Provider">
<plnk:portType name="tns:WR01"/>
</plnk:role>
</plnk:partnerLinkType>
</definitions>
The WSDL generated from the service registation on the gateway is as follows:
<definitions name="WR01" targetNamespace="http://xmlns.oracle.com/WR01">
−
     <types>
−
     <schema attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://xmlns.oracle.com/WR01">
−
     <element name="WR01ProcessRequest">
−
     <complexType>
−
     <sequence>
<element name="input" type="string"/>
</sequence>
</complexType>
</element>
−
     <element name="WR01ProcessResponse">
−
     <complexType>
−
     <sequence>
<element name="result" type="string"/>
</sequence>
</complexType>
</element>
</schema>
−
     <xsd:schema>
<xsd:import namespace="http://xmlns.oracle.com/pcbpel/adapter/db/top/WR01" schemaLocation="WR01.xsd"/>
</xsd:schema>
</types>
−
     <message name="WR01RequestMessage">
<part name="payload" element="ns1:Input"/>
</message>
−
     <message name="WR01ResponseMessage">
<part name="payload" element="ns1:Input"/>
</message>
−
     <portType name="WR01">
−
     <operation name="process">
<input message="tns:WR01RequestMessage"/>
<output message="tns:WR01ResponseMessage"/>
</operation>
</portType>
−
     <binding name="WR01Binding" type="tns:WR01">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
−
     <operation name="process">
<soap:operation style="document" soapAction="process"/>
−
     <input>
<soap:body use="literal"/>
</input>
−
     <output>
<soap:body use="literal"/>
</output>
</operation>
</binding>
−
     <service name="WR01">
−
     <port name="WR01Port" binding="tns:WR01Binding">
<soap:address location="http://dcmsinusapp02.dc.local:7780/gateway/services/SID0003002"/>
</port>
</service>
−
     <plnk:partnerLinkType name="WR01">
−
     <plnk:role name="WR01Provider">
<plnk:portType name="tns:WR01"/>
</plnk:role>
</plnk:partnerLinkType>
</definitions>
When i test the acess using OWSM console or try and consume it on JDeveloper I get the following error:
java.io.IOException: The document 'http://dcmsinusapp02.dc.local:7780/gateway/services/WR01.xsd' contains HTML tags.
Reason is:
404 Not Found
OracleJSP: java.io.FileNotFoundException:
Set the init-param debug_mode to "true" to see the complete exception message
This file not found exception is related to /gateway/services/WR01.xsd of course.
I've mostly followed the OWSM documentation in order to register the service.
Am I doing anything wrong referencing xsd's or something similar?
Thanks in advance

Answer to my own question:
BPEL processes exposed via OWSM can't be used from JDEV ws proxy generator
But the real question is: how do I prevent relative paths to xsd's on bpel wsdl?
Any pointers?
Thanks

Error When Sending Service Request Through OWSM Gateway

We are trying to test using OWSM Gateways and Server Agents to sign and then verify messages being passed to a web service on a server. We have been able to get this to work with a simple HelloWorld type service without any problems. We then followed the exact same steps to do this with an actual service and it is not working.
We run the test from the "Test Page" inside the ccore GUI. We first test the connection directly to the service and receive a message about it missing the WS Security header. This is somewhat expected. Then, we send through the gateway which is set up to sign the message and pass along the header and receive the same error message:
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"><env:Header/><env:Body><env:Fault xmlns="http://schemas.oblix.com/ws/2003/08/Faults"><faultcode xmlns="">:GenericFault</faultcode><faultstring xmlns="">WS-Security process failure:FAULT CODE: InvalidSecurity FAULT MESSAGE: Missing WS Security header in the SOAP message</faultstring><faultactor xmlns=""></faultactor></env:Fault></env:Body></env:Envelope>
We have checked the OWSM logs and can see that both times the server agent receives the request. The gateway logs, however, do not show any requests or responses even though the message should have gone through it. We do see these messages in the logs when testing our HelloWorld service with the same sign/verify settings. A review of the gateway.log file shows the following message displayed each time we submit a test to the malfunctioning service:
2007-10-18 10:30:22,263 INFO [AJPRequestHandler-HTTPThreadGroup-54] gateway.WSDLRegistry - Exception occured in updateWSDL
We have until tomorrow to get this issue resolved before development presses to move forward without OWSM security and we cannot have that. Your immediate assistance is required. Thank you.

Some additional research has been done here and it seems that web services created with SOAP 1.1 (such as the HelloWorld service) work just fine. The problem is with services created with SOAP 1.2. Are there separate configurations or changes that need to be made for SOAP 1.2 services?

OWSM GATEWAY PROBLEM .xsd error

Hi,
I am working on OWSM gateways.I deployed a mail web service and tried to virtualise it using OWSM gateways. I have registered the service . When i use the link for service wsdl generated by OWSM in internet explorer i can see the wsdl file but when do the same using test page in OWSM i get the following error.
java.io.IOException: The document 'http://localhost:8888/gateway/services/alshirawiMail.xsd' contains HTML tags.
Also i have only tried with web services but when i try to virtualise THE WHOLE BPEL PROCESS i get error like
java.io.IOException: The document 'http://localhost:8888/gateway/services/rule_doesnot_work.xsd' contains HTML tags.
Please reply.
Thanks and regards.
Vishnu
Message was edited by:
user607746

Hi
The problem with xsd resolved but now when i invoke the service from test page i am getting this error.
<env:Envelope
xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">null
<env:Body>
<env:Fault
xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<faultcode>env:Server</faultcode>
<faultstring>ORABPEL-08021 Cannot find partner wsdl. parnterLink "OWSM_SYNC_BPEL_PROCESS" is not found in process "OWSM_SYNC_BPEL_PROCESS" (revision "1.0") Please check the deployment descriptor of the process to find the correct partnerLink name. </faultstring>
null</env:Fault>
</env:Body>
</env:Envelope>

OWSM gateway : Message not encrypted error

Hi,
I have a BPEL process which invokes a web service via partner link. Both BPEL and service are secured with OWSM gateway.In the policy defined for BPEL I'm doing Sign Message And Encrypt using XPath expression( which is working). In the policy for webservice I'm doing a Decrypt and Verify Signature . But its not invoking the service and throws a Client:GenericFault saying Message is not encrypted.
In fact the logs from BPEL after encryption shows encrypted data. But logs in service does not contain the same data.
Am I doing something wrong? Should I copy something ? I'm using the same keystore for both the policies. The version is 10.1.3.1
Please help me
Thanks
Meer

All of them are running with Win XP SP2 at work. NAT-Traversal: is Disabled. DMZ is enabled. Thanks

Can we access a webservice registered to OWSM gateway using java client

Hi all,
Can we access a webservice registered to owsm gateway using a java client.
Thank you.

Using com.oracle.bpel.client.Locator to obtain a connection to the BPEL PM.
how can we invoke a web service if it is registered with OWSM is there any java api
to do this.
What are the possible ways we can invoke a web service registered to OWSM?

Schema validation in owsm gateway.

Hi all,
Could any one of you tell me how to validate the incoming message payload against the schema in the owsm gateway.
Thanks & regards,
Manoj Nair.

Hi Chintan,
I have OWSM Extensibility Guide for creating Custom Policy step, but i couldn't able to findout any thing..Iam very new to owsm, i really don't know how to create the custom policy step with help of this guide.. You have any information on how to create the custom step, for those who are new to owsm.
This is pertaining to validating the payload of the request pipeline using the xml shema.
I awaiting for your reply......
Thanks..

Multiple OWSM Gateway's running against 1 Policy Server

Is it a supported configuration to have multiple OWSM Gateways running against one policy server?
Thanks,
Michael

It won't trash the applications (see http://java.sun.com/j2se/1.4.2/compatibility.html to get 100% proof). If you install a new version, this will be used by default (if you just use "java"). Of course you can still use other JREs / SDKs when you explicitely use the version ("c:\Programme\j2sdk1.4.2_04\bin\java").

OWSM Gateway - DB Connectivity

Does the OWSM Gateway need direct connection to the OWSM Database ? I do not see anything in the Administration/Deployment guide in regards to this , however I do see the DB connection parameters in the gateway-config-installer.properties file .
Any pointers/response to this is highly appreciated.
Thanks

Can anyone post any help from Oracle?

OWSM gateway issue

Hi,
Oracle SOA suite version: 10.1.3.1.0
I started the OWSM with the quick start tutorial. Instead of using the time service I used another service deployed. When I started I had created a gateway which I then deleted.
Then I created a new gateway and done the steps specified by the tutorial.
The problem is occuring when I try to access the proxy wsdl url.
It giving an error :-
Oracle Web Services Manager Gateway C0003001: Cannot find WSDL for service "SID0003006"
The component ID of the Gateway is C0003001 (which I had deleted), the component ID for the gateway should be C003002..
What can I do to fix this issue?
Thanks and Regards,
Sashwat

Hi Mathias ,
Oracle SOA suite version: 10.1.3.1.0
I started the OWSM with the quick start tutorial. Instead of using the time service I used another service deployed. When I started I had created a gateway which I then deleted.
Then I created a new gateway and done the steps specified by the tutorial.
The problem is occuring when I try to access the proxy wsdl url.
It giving an error :-
Oracle Web Services Manager Gateway C0003001: Cannot find WSDL for service "SID0003006"
I have updated the gateway.component.id with C0003007 the next possible component ID in gateway-config-installer.properties located in OH/owsm/config/gateway and then redeployed the gateway successfully.Now I am getting a little bit different error :
Oracle Web Services Manager Gateway : Cannot find WSDL for service "SID0003007"
I deleted all other gateways and this is the only gateway remaining.
Please tell me another way to fix this.
Thanks and Regards,
Vargab Pathak
Message was edited by:
Vargab

OWSM Gateway intercept by URL

Similar Messages

Maybe you are looking for