URGENT : Javascript in HTMLB event .

Is it possible to call a Javascript function on "onCellClick" event of tableview control's cell ?
If yes, can any1 plz give me a sample code ?
Its urgent.
Thanks in advance ,
Arijit B.

check the rules of engagement.
:O Rules of Engagement --- 2005-02-25
avoid using URGENT.
check the following thread
https://forums.sdn.sap.com/click.jspa?searchID=2227965&messageID=2057396
<i>Is it possible to call a Javascript function on "onCellClick</i>
no that would trigger server event
Raja
Message was edited by:
Durairaj Athavan Raja

Similar Messages

Help with Javascript error in event handler slowing animation down.

Hi all--
I did an animated book cover for my publisher, Baen Books, but an error keeps coming up in my animation. The actual animating can be viewed here:
http://baen.com/310x204/A_CallToDuty.html
As you can see, when the error pops up, the animation grinds to a halt, an it has to recover. I am not well enough versed in javascript to know what is going on. The error code below repeats over and over again as it plays.
6Javascript error in event handler! Event Type = timeline edge.3.0.0.min.js:171
3
<error> VM26:184
Javascript error in event handler! Event Type = timeline edge.3.0.0.min.js:1714Javascript error in event handler! Event Type = timeline edge.3.0.0.min.js:1713
<error>
If anyone has an idea what is causing this, I would be extremely grateful for any help.
David Mattingly

Hi Hemanth--
I put it in a dropbox folder for you here:
Dropbox - EdgeAnimation
This contains 2 versions--a small one for the preview, and then a larger one when people click on the cover preview. Thanks in advance for your help.\
David Mattingly

Javascript error in event handler! edge 4.0.0.js, what to do about it?

Site
Hello everyone. I get an error in my chrome cosole, what can I do about this?
I dont have this problem in all browsers, just in chrome, and in some versions of Firefox.
The problem occurs when I click any label in the iframe (see website, speaks for itself).
line 5838 window.console.log("Javascript error in event handler! Event Type = " + eventType);
does anyone know how to fix this?
And why do I only have this problem in some browsers?

I basically want the labels in the Iframe to make the parent page animate to a specific anchor tag.
ps. This is what I posted on the jquery forum as well:
I tried to do this by letting the iframe .trigger a .click to a button on the .parent page.
I did this in two ways.
one: the click is triggerd in (/by) the iframe
two: the click is triggerd by a script in the parent window, that script is launched by the iframe
Here's the thing:
this is what one of the <a>'s that the iframe will click looks like:
<a class="nonblock nontext anim_swing" id="u185" href="index.html#contact"></a>
The code is generated by adobe muse which has a function to smoothly scroll to a location on the page, and I am guessing the "anim_swing" class takes care of that.
I would like the colorful labels in the iframe to do the same thing as the <a> above.
and it works in some browsers on some computers but somehow not on all of them (with method two the adblocker doesn't seem to be an issue ).
I also tried to let the parent page scroll directly with the jquery .scrollto function. That did not work either (see the jquery forum).

Javascript error in event handler event type = timeline

Hi,
I have a small EdgeAnimate projekt with version 1.5.0 and the local export works fine... I must include the package at a CMS and I update all paths to absolute paths and all files are loading...
but I the animation dont play - I see at the javascript console the follow output
javascript error in event handler event type = timeline   edge.1.5.0.min.js:143
Springender Punkt: Rettungswagen - Der springende Punkt
I dont found any solution... :-((

Hi Scott,
I have gone through your shared composition created in older verion of Edge.
If you open the older composition html page in browser, there already have some of the error messages in the console as you mentioned above like
      Javascript error in event handler! Event Type = timeline.
And as you said with the latest Edge, when you upgrade the old composition, some new error messages gets added to the existing ones.
As in the latest Edge, the whole of runtime has been shake-up, some of the attributes has been removed and are added in different way.
Example: To access timelines of a symbol:
     Old way:           sym.timelines['Default Timeline']
     New way:          sym.data[sym.name].timeline
You need to make some modifications in index_edgeActions.js file like:
     1. Search & Replace "timelines['Default Timeline']" with "data[sym.name].timeline"
     2. And in the code taken from EdgeCommons.js, replace "getVariable("symbolSelector")" with "_variables["symbolSelector"]".
Hope, these changes will remove the new JS issues you mentioned.
hth,
Vivekuma

Javascript error in event handler! Event Type = element [edge.2.0.0.min.js:162]

I'm doing a little edge project (now in beta version) for my girlfriend (she hates the code), with examples of the animate() method and other functions like setInteval(), but when I run I get the following error in Chrome console:
Javascript error in event handler! Event Type = element [edge.2.0.0.min.js:162]
But this library is global for all projects, how is possible that trigger an error?
Example here:
https://app.box.com/s/m7nof4al6597gfn47jlu
Thanks.

you dont need to import java ease !!
it's already included in edge animate, remove that yepnope completely your problem will gone
Zaxist

Handling HTMLB events in BSPs???

Hi all,
can anybody tell me the how to handel events in BSPs??

Hi Aravind,
Follow the link /people/brian.mckellar/blog/2004/07/28/bsp-programming-handling-htmlb-events u can understand.

HTMLB eventing using javascript

Hello experts,
I have a requirement which i am unable to figure out how to do it .
I have HTMLB dropdown in which the items are popolauted using listitembox. Now my requirement is to disable another drop down depending upon the value selected in this dropdown .
There is no controller in this PDK component . Hence need to use javascript to handle this . But not able to do it.
Could anyone help me in resolving this .
Points will be awared.
Regards,
Pratima.

Hi,
never used, but found here: [http://www.sapdesignguild.org/resources/htmlb_guidance/index.html|http://www.sapdesignguild.org/resources/htmlb_guidance/index.html] in this part: [http://www.sapdesignguild.org/resources/htmlb_guidance/dropdown_dev.html|http://www.sapdesignguild.org/resources/htmlb_guidance/dropdown_dev.html] that it should support onClientSelect event - that should do it.
Romano

Javascript in tableviewcolumn event

Hi there,
I built a bsp with mvc and htmlb. In a tableview there is the possibility to delete a row entry by clicking on the corresponding cell in the row.
The event is definied as follows in a table column:
<htmlb:tableViewColumn columnName          = "LOESCHEN"
                           width               = "30"
                           horizontalAlignment = "left"
                           title               = "Löschen"
                             onCellClick = "onMyCellDeleteClick"
                           cellDesignKey = "design"
                           type                = "BUTTON"      >
      </htmlb:tableViewColumn>
There is a handler in the controller which takes the related action.
So far so good. If you click on the cell the row will be deleted.
But this is now a little to dangerous. I should place a messagebox before which asks if I´m really sure to delete this row. And that´s the problem. Normaly I would do this with javascript - but I have no clue how I can integrate this in the tableViewColumn.
Thanks for your help.
Regards
Michael

Hi Michael,
of course you can work with javascript in the view, but you need always the element ids which can be complicated in more complex tableviews while using mvc.
Following coding you can modify for your topic (not tested):
<% DATA: event_code TYPE STRING. %>
<bsp:htmlbEvent
onClick="onMyCellClick"
onClientClick="confirm('Do you really want...');"
event_code="<%=event_code%>" />
<script for="yourid" event=onclick type="text/javascript">
<%=event_code%>"
</script>
I think you should better work with iterators - is the most flexible way for this and future approaches.
Regards,
Sebastian

HTMLB events in AbstractPortalComponent

Hello,
I have a portal component that inherits from AbstractPortalComponent. I'd like to use HTMLB and its controls (tableView for example) to display the data in the portal. But how do I have to do the event handling for the HTMLB controls? Usually one would say:
<hbj:tableView onNavigate="onNavigate" ... />
But how do I have to handle this event in my class that inherits from AbstractPortalComponent? Do I have to use the doRequestEvent() method? If so, what's the name of the event? Or do I have to implement a onNavigate() method - as if I would use a JSPDynPage?
Or is it not possible to use HTMLB controls and a AbstractPortalComponent together?
Kind regards, Lars

hi,
Try this.
IPageContext context = PageContextFactory.createPageContext(request, response);
// get the event
Event event = context.getCurrentEvent();
if (event.getAction().equalsIgnoreCase("onNavigate")) {
//write your event handling method
Regards,
Srinath

URGENT:Process Chains And events Related

Hi All,
I have created a new process chain which is a normal ODS Process Chain.For that I started with the start Process and then created event in sm62 to trigger the start of process chain.Similarly,I have at the end of the process chain ,I have added 2 ABAP Programs ,one to mark the successful completion of process chain and another to mark the Error or Unsuccessful completion.For these programs,I maintaines Processvariants and here, we have utility Programs.So used the relevant utility program and created a program variant and Events ,One for successful completion of process chain and another to mark the Error or Unsuccessful completion.
But ,Now ,I find that when I trigger the eventin sm64,I find that the process chain is not being run.Is that any problem with the events I created.This is the first i am involved with creation of events in SM62.Can anyone help me in this regard.
Can anyone,tell me thatdo we need to do anything else apart from Creating events .Imean like assigning jobs and then Programs in the Step of that Job.
Please Kindly help me in this regard.It is very very urgent for me.Thank you.Points will be assigned.
Regards,
Samir

Hi,
I have tried in the same way you have said .I have maintained as after event and activated and scheduled.after that i triggered the event insm64.But still,I am not able to see the Load in RSMO.
I have just checked out in sm37.And found that some jobs have failed.I think this might be the reason for the Process chain to not run.
I am just pasting the error msg and solution.
Job BI_PROCESS_ABAP, waiting for event RSPROCESS 489W6WH6I7OHV7BL3N9909F7F, has no predecessor
Message no. RSPC003
Diagnosis
Although job BI_PROCESS_ABAP has been started by event RSPROCESS 489W6WH6I7OHV7BL3N9909F7F and is recognized in the process chain, the current run for this process has no job preceding it.
This is why the system was unable to determine a log ID, and the chain is broken.
System response
The job has been terminated.
Procedure
With the exception of the start process, each process must have a process that precedes it.
Then Another error for the another cancelled job is
Job BI_PROCESS_OR, waiting for event RSPROCESS 489WC2QYBC4AJSYILQ10TWABF, has no predecessor
Message no. RSPC003
Diagnosis
Although job BI_PROCESS_OR has been started by event RSPROCESS 489WC2QYBC4AJSYILQ10TWABF and is recognized in the process chain, the current run for this process has no job preceding it.
This is why the system was unable to determine a log ID, and the chain is broken.
System response
The job has been terminated.
Procedure
With the exception of the start process, each process must have a process that precedes it.
Please kindly help me if you understand the problem.
Thanks,
Samir

Javascript attach onClick event

I have some Flash 3rd party objects on my website that are
used for various reasons. I'd like to know when a user clicks on
them, but I don't have access to the source.
Is it possible to attach OnClick events to a Flash object via
javascript? Or is there a recommended way to receive notification
when a click occurs on the Flash object?
In Javascript I can get the object in question, but I haven't
found a way to attach onClick events. Please help.

You can set up systems to catch click-throughs, but they
require the correct line of code to be put into the Flash movie
(which you've said you can't do)
I take it you've tried adding an onClick="..." attribute to
the object tag?
e.g. just test it with:
<object onClick="alert('This works!');" etc
>...</object>
Then try clicking on the movie and see if an alert box pops
up... I can't say I've tried it though, it's quite likely when the
Flash is active it handles all mouse responses so the javascript
might not detect them

Urgent: JavaScript runtime is out of memory; server shutting down instance

I'm getting this error with one chat application.
According to
http://www.adobe.com/livedocs/flashmediaserver/3.0/docs/help.html?content=09_config_status codes_1.html
..I should "Check the JavaScript runtime size for this application in the configuration file".
By default it was set to 1024. Any attempt to increase it causes FMS not to start again.
This problem just came out of the blue. This same chat app has been in operation with no trouble for about 10 months. I restart the server machine on which it resides before each new chat session.
Any suggestions?

I tried a number of values that were multiples of 1024 (2048, etc).
The only thing that worked seemed to be changing the number and rebooting the server machine.
Not sure what caused the initial problem though. Saw very wierd activity in the FMS console. Had a few hundred users connected, as I typically do for one of my events, and the chat application was repeatedly unloaded from FMS. When it was reloaded the FMS console would show crazy large numbers in the "Clients" column - numbers like 3954. Then it would drop to like 340. Then shoot up again to wildly large numbers.
Is that the result of a memory problem?

How to pass parameters to javascript from HTMLB Button Click

Hi Experts,
I am using a HTMLB Button, I need to pass parameters to JavaScript onClientClick.
Whether we can pass parameters to javascript function from HTMLB button.
I tried to pass parameters to javascript in onClientClick, but on load of the page it is saying that its a Syntax error.
This is the code that i have created Script
Note: The parameters and the Button are dynamically created. Also there are n Numbers of buttons created.
Please help me in this regard to solve the issue. If there are any error in syntax please let me know.
Thanks & Regards,
Palani

Rather than using SQL loader, you could just use similar syntax in an external table definition. It both cases, the file may need to be at the OS level.
http://www.psoug.org/reference/externaltab.html
If your file is stored in an Apex table's clob column, you can just loop through the individual lines (but then need to parse the lines yourself). See clob2line here http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:285215954607#388438800346703098
Or you can dump the clob to the OS first (using utl_file or dbms_lob), and then read it back using external table, taking advantage of your control file definition. sqlloader has the disadvantage of needing user/pass usually.
http://www.psoug.org/reference/dbms_lob.html
http://www.psoug.org/reference/utl_file.html

Mix formCalc and javascript in same event?

Hi Folks,
I have a bunch of formCalc and Javasript I'm trying to merge (two different forms, different programmers). Is it possible to mix javascript with formCalc in the same field event? If so, how?
thanks!

No, it is not possible to mix FormCalc and JavaScript in the same event. You will get run-time errors.
Steve

Convert Javascript: switch(xfa.event.newText) to Formcalc Syntax

I was wondering if someone could provide me with the syntax for formcalc for the following javascript. This is used to hide or make visible 2 fields based on a value in a drop down list:
switch(xfa.event.newText) {
    case 'A - Approved':
        form1.Page1.2nd_Title.presence = "visible";
        form1.Page1.2nd_Signature.presence = "visible";
        break;
   default:
        form1.Page1.2nd_Title.presence = "hidden";
        form1.Page1.2nd_Signature.presence = "hidden";
        break;
Thanks,
Mallard27

Sorry, no simple switch-like statement in FormCalc, although there are convoluted ways to simulate it. For your example the easiest is if/then/else:
if (xfa.event.newText == "A - Approved") then
     form1.Page1.TextField1.presence = "visible"
     form1.Page1.TextField2.presence = "visible"
else
     form1.Page1.TextField1.presence = "hidden"
     form1.Page1.TextField2.presence = "hidden"
endif
Also, not sure if you can have object names that start with a number, like "2nd_Title".

URGENT : Javascript in HTMLB event .

Similar Messages

Maybe you are looking for