URGENT, Phone wont get past start-up screen and iTunes doesnt see it

My 3.0.1 problems just got WAY worse!!!
After the 3.0.1 update I started having the same issues as everyone else until today. I noticed that my clock was just picking a random time( hours and minutes were off) and would not take to my manual setting of the time or on auto. So as i have been doing several times throughout the day, i performed a hard reset. Only this time it never came out of the reboot/start-up apple symbol screen. I then attempted to perform the hard restart several more times to no avail. I am now stuck with a phone that will not boot nor can i connect it to my computer. While connected, iTunes does not detect it and i can not do a restore either. any suggestions would be great but i fear for the worst!!!

Try to connect in recovery mode and restore: http://support.apple.com/kb/HT1808
If you can make it, restore "as new iphone" , maybe your backup contains corrupt files and these would be copied back using the "restore from backup" function.

Similar Messages

  • My macbook pro wont get past the grey screen at startup. Help!!

    After doing a run of the mill software update on my macbook pro (running snow leopard) it froze during the "moving items into place" stage. I forced a shut down and now it wont get past the grey screen with apple logo and spinning wheel. I have tried booting from the original DVD but it still freezes. When I boot it in verbose mode it seems to stop at "jnl: unknown-dev: update_fs_block: error reading fs block # 3597880! (ret 5)", the Apple AHCD Disk Queue manager :: set power state is timing out and there is a disk I/O error. I have tried to reset the power manager (not sure if it worked or not) and I have also tried clearing the PRAM (again, not sure of that worked). When I try to look at the hard drive using target mode on my imac the hard drive doesn't come up but the DVD does. I'm concerned that my hard drive is fried. Any suggestions?

    It would help to state in your post which remedies you tried that didn't work.
    Start here >  OS X Lion: If you see a gray screen at startup
    If nothing there helped, try Starting up in Safe Mode
    Safe Mode deletes some system caches that may help.
    A Safe Mode boot takes longer than a normal boot so be patient. Once you are in Safe Mode, click Restart from the Apple menu.
    If a Safe Mode boot didn't work, since your Mac has OS X v10.7 installed, restart your Mac while holding down the Command + R keys so you can access OS X Recovery built in utilities. The startup disk may need repairing.
    Tip:  Hold down the Eject key while starting up your Mac to eject a disc.

  • Upon start up I get a start up disk full message and to delete files, now I only get a a blue screen on start up. How to I get past the blue screen and how do I delete files?

    Upon start up I get a "start up disk full message, delete files". Now on startup I only get a blue screen. How do I get past the blue screen and how do I delete files.

    That;s really not enough free space... you can use a tools such as OmniDiskSweeper to find out where your large files reside and begin pruning (or copying to an external if they're files that you want to keep).
    One thing is certain - if you're going to continue your current usage you're certainly going to need to install a larger boot drive.
    Clinton

  • On my iPhone 4, I cannot get the "not enough storage on iCloud" message to close. Therefore, I can't get past this box/screen AND I can't turn the device off. Please help.

    On my iPhone 4, I cannot get the "not enough storage on iCloud" message to close. Therefore, I can't get past this box/screen AND I can't turn the device off. Please help.

    Try resetting it by holding the power and home buttons at the same time until you see the Apple logo, then releasing.  You won't lose any data by doing this.

  • I downloaded ios5 an error message 3002 came up now my iphone stuck on loading screen and itunes doesnt recognize my iphone.

    i downloaded ios5 an error message 3002 came up now my iphone stuck on loading screen and itunes doesnt recognize my iphone.
    now my iphone has a blank screen for a couple seconds the loading screen appears then apple re appears.
    A REPEATING CYCLE now i have No PHONE!!!! Help ME PLEASEEEEEEEEEEEEEE

    Try it...
    Leave the USB cable connected to your computer, but NOT your phone, itunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
    i´ve done it and worked 100%
    Good lucky

  • Old Ipod classic 160 gb wont get past battery charge screen has been sitting for months

    I have an old Ipod classic 160gb,that has been sitting for a long time so im sure the battery has no life in it at all,im charging it via usb cable and it wont get past the battery charge screen,how long would a completely dead battery take to move off the charge please wait screen untill you know its a deeper issue at hand if so how would you get it to start up pass the charging please wait screen?to see the true issue?
    Thanks for your help
    Ice

    Try to do a reset and see whether it can be solved
    http://support.apple.com/kb/HT1320?viewlocale=en_US&locale=en_US

  • POWERBOOK G4 14 1.33 WONT GET PAST THE APPLE SCREEN

    I have a powerbook G4 14 inch 1.33 mhz processor with 256 mb of ram. The screen will not get past the apple screen. I have tried 3 seperate hard drives none of them would boot past the apple screen. The disk drive is broken, I will be replacing it shortly to put a OS X CD or disk warrior cd in it. Does anybody know what would cause this? I reset PRAM, PMU and tried booting in safe mode. It gets to the apple and then the little circle spins and spins and it doesnt load..

    Heres some history of the computer. I orginally put a 12 gb hard drive cuz it came with no hard drive in it and it was working great, but then became slower and slower until it got stuck on the apple screen. i tried 2 other hard drives and they didnt work. i then replaced it with a brand new 60 gb hard drive. i also bought a new optical drive and put that in because the optical drive never worked. i have tried two different ram sticks. i have tried pressing shift,c,option none of that works. option makes it freeze on the boot screen. open firmware works...command S did work until recently...command v does not work...reset pram and nvram. reset PMU. I AM AT A LOSS. is there something i forgot to leave connected during the process that could be causing this? I get USB BOOT ERROR 0 1 1 in open firmware. I DOUBT its the logic board, because it makes the chime and I can get into open firmware and the start up screen.

  • Wont get past Starting OS X on Menu

    MY ibook g4 17 inch used to start up and go to the grey screen where the apple logo was and sometimes the loading wheel below it would not come up , I used to just turn it off and try and restart it and every now and again i would have this problem and sometimes i wouldnt have it at all. But now The computer gets past the grey screen moves to the blue and in the window it says starting Mac Os X and the blue bar loads completely but it never gets past the Loading screen it just sits there. I tried repairing the disk and some things were repaired while others were not. It gave me errors about some ofmy applications and files reading as rxrxr-r error when it should be rw-rw-r . What should i do? im into home recording and have lots of audio files and projects created that i do not want to loose and i also need my computer for school. But all i can do is let it sit and the loading screen or try re install osx and when i tried that it said there was a disk error and could not be done.

    yes i did that and now i am using panther for my os but some of my software will not work, my cubase unesxpectedly shuts down, and imovie unexpectedly shuts down, ichat will just jump in the dock a couple of times when i try to run it but nothing happens, that also happens with iphoto, mail, safair, quicktime, and ical but garageband and idvd seem to work fine. Im now using osx 10.3.9. I can not find my black disk witht he x on it. i think that it was panther. If i buy tiger or wait for leopard will it fix my application problem? also im using internet explorer and whenever i go to the apple.com/downloads it freezes and i have to force quit it all the time so i can not get any downloads.

  • Zen Micro 5g Won't get past Start Up Screen--He

    After searching other messages, I've seen a lot of people with this same problem--player will turn on but will not load past "Creative" screen. Yet most people have been able to atleast get to the Recovery screen.
    I have not been able to load into Recovery, so I can't clean up, reboot, format, or even update my firmware at all. It's only 2+ months old, so I'm within my warranty, and I suppose most people are going to tell me to send it back. But this problem really bothers me and I'm questioning whether I should even take a chance on another one, seeing as how this problem seems at the very least mildly common. What are my options at this point? Anyone have any other suggestions for trying to recover the Micro I have right now?

    I found a solution to the hanging on the creative logo screen. I saw numerous posts saying that all you could do is send it back to the company, then I found this one:
    Hi All,
    My zen has been down for the last week, hangs up on creative screen. I took the battery out and was able to get to the recovery mode but "disc scan" would not do anything(in limbo) and "reboot "met with the same result, nothing. If you want to talk to anyone at creative and are past your 6 month warranty window you have to pay $20 for the phone call. Well I decided to take matters into my own hands and spent yesterday morning researching old threads about this problem. I kept finding an uncommon fix. When you hold your power button on and replace you battery and the recovery screen starts up you wrap on the back with your knuckle, in my case I hit my zen face down sharply on my dresser. To my amazement the "Doobie Brothers" started playing and I have'nt had any problems yet. Evidently these systems have a hard dri've that hangs up. It may not work for you but it cured my glitch.
    Steve C.
    It worked for me, but only after four or fi've tries. Good Luck!<IMG height=6 src="http://forums.americas.creative.com/i/smilies/6x6_smiley-very-happy.gif" width=6 border=0>

  • EMac can't get past starting up screen

    Hi all,
    My eMac G4 had Tiger (10.4.10?) and I attempted to upgrade to 10.4.11. No go. I kept encountering problems in the Installer.
    So I rebooted to use Disk Utility and it found some drive problems that I fixed. Clean bill of health on permissions too.
    Now when I restart, the computer won't get past the "Staring Mac OS X" screen. It just keeps spinning.
    I've also tried in Safe mode . . . no difference.
    Any thoughts?

    Since you already tried the first 3 things recommended, then this'd be the 4th!
    It will take your OS back to it's Original for that install disc, and should allow you to boot up.
    You can skip a lot of the upgrade steps by getting...
    The combo update for PowerPC-based Macs...
    http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
    The combo update for Intel-based Macs...
    http://www.apple.com/support/downloads/macosx10411comboupdateintel.html
    Repair Permissions afterwards, reboot.
    It includes all the steps up to and including 10.4.11.
    f this doesn't work and I still can't start up, what then?
    I don't think that's going to happen... if it does, we most likely have a Hardware problem.

  • Imac won't get past start up screen

    My iMac can't get past the start up screen (white screen with apple logo). How can I get past this?

    The following support article is somewhat outdated. Where it refers to booting from an installation disc, you should boot into Recovery (if running OS X 10.7 or later) by holding down the key combination command-R at the chime. If your startup volume is encrypted with FileVault, you’ll have to unlock it in Disk Utility before you can do anything with it.
    Mac OS X: Gray screen appears during startup

  • Start up problem-can't get past Apple grey screen and spinning gear

    Upon trying to start up my laptop, got nothing but the apple logo, grey screen and spinning gear. I tried several things to resolve the problem on my own (hardware test said it could not verify the disk/could not start up from the OS X install disk/reset the power mgmt. unit/disconnected all peripherals)and finally went to the Apple store. Genius bar said they were able to start up from their hard drive and suggested that I buy an external hard drive, go home, start up again and back up all files. I bought a My Book. Got home and same thing happened: Apple logo and spinning gear. I am an Apple user of 18 years, but have not had to do much in the way of diagnostics. Have tried fsck routine today that I found on another posting here today. If the Genius guy got it going, I assumed that I could too. I was wrong. Any advice would be appreciated. It looks like this is the end of the road for my Powerbook, but I'd like a shot at recovering data.
    Message was edited by: Debbie Wach

    Hi Debbie/Gregg -
    I may have missed something but can't you just put a new hard drive in your laptops? You may not be able to recover your data but it doesn't mean the end for your computer. The same thing happened to my TiBook and I put a new 120Gig hard drive in and it's had a new lease of life.
    I bought a new internal hard drive along with an external enclosure and connected it up to my computer and from there cloned it. Then I transferred the external into the TiBook and put the old drive into the external and I use that as an external now. I realise your hard drives are dead but you could use another computer to so the same thing and just install the OS on it.
    I bought this -
    http://www.macupgrades.co.uk/store/productinfo.php?productsid=452
    Then followed the instructions here -
    http://www.ifixit.com/Guide/Mac/PowerBook-G4-Ti-DVI/HD-Replacement/33/6/
    Once your new hard drive is installed you may be able to try and repair the old one in the external enclosure?

  • Photoshop Elements 10 Trial wont get past "accept license" screen.

    Hi
    On a Mac. OS: 10.6.8
    Have downloaded a trial version of Photoshop Elements 10.
    Tried launching it.
    Get a window asking me to accept the license for Elements Organizer.
    Click accept.
    Window disappears.
    Window reappears - again asking me to accept license for Elements Organizer.
    Click accept - window disappears when I click "Accept" - then just reappears, etc...
    Can't get past this window.
    Uninstalled the software.
    Re-downloaded it.
    Exactly the same thing.
    Tried the online chat-help thing.
    Waste of 15 minutes.
    Was sent here.
    (Just a thought, but I previously had a trial version of elements 9 - but uninstalled it - could that be messing something up?)
    Thanks

    This forum is for Adobe Digital Editions software, not Photoshop.....
    ===============

  • G5 wont boot past grey Apple screen and spinning cirlce

    I cam in to work this morning and found my Mac on with fans blazing the the display just showing the grey Apple screen and spinning circle. I have it set to turn on before I arrive at work and it has been doing so flawlessly for all the years I've had it. When I shut down last night everything was working fine. Now this.
    I've scanned some help forums but can't quite determine what the cause might be. Old battery on the memory card, a bad memory chip, ...I'm not sure.
    As I said, things had been working flawlessly for years.
    I've tried unplugging and re-plugging in the power cord (nope), resetting the PRAM (didn't work), Pressing the PRAM button on the memory board (again no), resetting things from Open Firmware (Using these commands: reset-nvram, set-defaults, reset-all -- no luck)and now have Disk Utility repairing permissions from the install DVD. That doesn't seem to be doing anything, it has been "Determining correct file permissions" from my startup disk for about 20 mintues now...usually it goes a lot quicker.
    Any thoughts? This is my primary work machine and if I can't get it running I'm dead in the water. I'm accessing these forums from a PC in the office and would rather not have to, hahah.
    Thanks.
    (also, when running permission repair, do you repair the volume or the primary disk? I'm repairing the named sub-volume of the hard drive.)

    (also, when running permission repair, do you repair the volume or the primary disk? I'm repairing the named sub-volume of the hard drive.)
    I repair the hard drive that contains the Startup volume, unless multiple partitions are present.
    In that case, only the startup volume.
    Rather than "repair permissions", "Repair Disk" is what you should run on the startup volume.
    Troubleshooting:
    http://support.apple.com/kb/TS2570
    http://support.apple.com/kb/TS1417
    Reseating the RAM and graphics card may also be helpful.
    If you get the machine started again, install Applejack for future help:
    http://applejack.sourceforge.net/

  • HT201401 my phone wont go past the emergency calls and imeiunown and iccid unown can anyone help please

    my phone wont conect it keeps stayining on emergency calls only

    IMEI unknown indicates a critical hardware failure.  You'll have to take to the Apple store for replacement.  Out of warranty replacement for the iPhone 4 is $149 (US).  If it's jailbroken you're out of luck.

Maybe you are looking for

  • KVM Switching

    I would like to know of any suggestions for the following situation. I work at a school and have a desktop PC, a MacBook Pro and a MacMini server. I am currently running a cinema display as my main monitor. I would like to suggestions on a KVM switch

  • How to find Specfic Purchase Order is being edited or not

    Hi Friends, How to find Specfic Purchase Order is being edited or not. Thanks in Advance. Murali Krishna K

  • Remote Cube  With Source System SQL

    Hello I had create connection with SQL Server. I had generate Datasource. I had Create a Remote Infocube. But I can't Assign SQL as source System Is this possible?

  • Iphone broken - Repair plan doens't work on the website

    My Iphone is broken so i wanted to send it back to have it repair. Unfortunately, on the French Website, the bouton to validate the form isn't working. I can : - Give my IMEI number - Check the problem's type - Choose the country where i'm from But o

  • \Running program in back ground

    Hello,    I want to run a program a particular time. how can i do it?. Please send me some doc's regarding this please to [email protected] regards SDN powered