Urgent, Please help with new MIDI pedal

I just got an old awesome MIDI pedal the X-15 Ultrafoot. The pedal has two expression pedals and 10 pushbuttons/pushpads (as well as two buttons to scroll through banks, and a "mode" and "bypass" button).
What I want to is assign each pushbutton to a different parameter. I then want the expression pedal to be activated to whatever parameter I have selected. The problem is I do not know how to make the expression pedal exclusively control only the last parameter that was selected.
If somebody could help me with this I will be eternally grateful

Hi Harm,
I tried moving the BCLK slider up to 140 in the following application provided by asus (its easier than in the BIOS) and the CPU went up from about 3450mhz to 3780mhz. The DRAM only went up to 562. I dont think im understanding what you mean by 2:10 mermory timings and getting the memory up to 1800, becuase it seems that i would need to increase BCLK to much higher than it is in order to get the DRAM from 562 to 1800? Shall I try push the BCLK up higher to 150 (is it safe?)
Below is the result of moving the BCLK slider from 130 to 140. It only moved to 562 Mhz ? Please can you explain how one gets this figure to be in the range of 1800mhz to 2000mhz

Similar Messages

HT3209 Purchased DVD in US for Cdn viewing. Digital download will not work in Cda or US? please help with new Digital code that will work

Purchased DVD in US for Cdn viewing. Digital download will not work in Cda or US? please help with new Digital code that will work

You will need to contact the movie studio that produced the DVD and ask if they can issue you a new code valid for Canada. Apple cannot help you, and everyone here in these forums is just a fellow user.
Regards.

Urgent - please help with parsing HTML

Hi,
I'm very new to Java - i'm a biology major, actually, but taking this class for fun. Unfortunately, I'm having quite a bit of trouble with it. I've written a class that downloads a web page, converts it to a string, and then sends the string to another class, called BankRecord.
The web page string looks something like this:
bodylinks101>Prime Mortgage</a> (909) 369-1012</td><td bgcolor=#e4e4e4 valign=top align=center>4/18/2003 10:15</td><td bgcolor=#e4e4e4 valign=top align=center>5.875%
So, what I am trying to do is parse the HTML so that it returns, as a string, the appropriate information. For example, in the above HTML, I want "Prime Mortgage (909) 369-1012 4/18/2003" etc.
The above is just one record, with several fields (bank name, phone number, date). The entire web page has quite a few records, for different banks, and I need to extract all of them. I think I've figured out how to find the start and end of the first record, but I don't know how to go about looking for more records. I'm guessing a loop? Also, how do I go about distinguish between the fields in each record (i.e., how to distinguish between phone number and date fields) Here is the code I have so far:
import java.util.*;
public class BankRecord
 // Set up variables
 private String strContent;
 private Integer intPos;
 // Constructor
 public BankRecord (String strVar)
 strContent = strWebPage; // set strContent to incoming string
 intPos = 1; // initialize intPos to 1
 public getNextRecord()
 // uses findBankStart to find next bank record; if found, return true.
 private findBankStart(intPos)
 // accept an integer indicating a place to start looking for beginning of each
 // bank record. If there are no more records, return a -1; otherwise, return
 // starting position
 // Find beginning of record
 int intRecStart = strContent.indexOf("bodylinks101>",intRecStart);
 // Find end of record
 int intRecEnd = strContent.indexOf("bodylinks101>Apply",intRecEnd);
 // Find beginning of first field in record
 int FldStart = intRecStart + 13;
 // Find end of field in record
 int FldEnd = strContent.indexOf("<",intFldStart);
 public getField(intFldNum)
 // return the field asked for by number as a string.
}PLEASE help as soon as possible...thank you very much.

Thuyker,
Here are 2 approaches:
If you have a fixed format, parse via delimiters. For example, if each "record" is as follows:
NameAcct Nobalance
each "field" of the record is delimited by ... tags. Thus, you could use regular old string functions such as indexOf() to read through the HTML string, and to pick apart the data you need.
Alternatively, get a HTML parser, and let it do the work for you. A SAX-like one that I've used successfully is at http://www.quiotix.com/downloads/html-parser/
--A

Urgent Please help with a Conferencing problem in CUCM 6.1

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
We have a configuration of CUCM 6.1. We have 24 voice ports (FXO) configured in H 323 registered with the call manger. A CUE 3.2 configured for IVR and mail box. Gateway is a Cisco 3845 and the IOS version is 12.4(15) T10
The problem is whenever a conference is configured with an outside number the FXO port is not releasing after the call disconnects. It is not FXO disconnect problem. This happens only when a conference is taking place. There is no problem with any other outside or inside calls.
I am attaching the configuration of Gateway. Please help me with the problem, I am very much thankful for you that.

The Family pack covers upto 5 computers, other Install Disc cover one computer only.

Urgent: Please help with T440p WWAN

I have a simple question since I'm planning to buy a new thinkpad t440p
Does all models have a WWAN connection ?
Resellers in my Country doesn't give any custimization options and when I've been to the shop to get it they only said that there is a sim slot under the battery does this mean that I can use mobile data as soon as I get it or what ?
in the device manage I opened network adapters and I found the following list
bluetooth device
bluetooth device
intel centrino advanced n6235
Intel ethernet connection i217-lm
there is another PCI simple communication controller unidentified device
the laptop has
core I5 extreme vpro
500gb hdd
4gb ram

Hi,
T440p laptops do not all come with a WWAN card installed. Most - but not all - have WWAN antennas installed but may or may not have a card. The SIM slot is always there as it's part of the generic T440p case.
The PSREF page may help you figure this out if you can find your MT-M (machine type-model). Otherwise post your MT-M here and someone may be able to track down the exact specs.
http://psref.lenovo.com/Product/62
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Urgent- Please help with image overlaying

Hi,
Please,please, can someone help me with an imaging issue and show me what I'm doing wrong.
I'm a swing beginner and I'm trying to create a application for a board game. Currently I'm using JLabel components to try and create jpeg pieces over a JPanel component that has the board background.
Currently I've written the code for the board background component and the pieces but can't get the image to appear on the background.
Please can someone show me what I'm doing wrong.
If someone can help me get this working, I've got 16 dollars from other posts in this forum I can give you.
Thanks.
public class BoardPanel extends JPanel {
public BoardPanel()
//Overwrite abstract painting method
public void paintComponent(Graphics g)
super.paintComponent(g);
          g.drawImage(backgroundImage,0,0,this.getWidth(), this.getHeight(), null);
private Image backgroundImage = new ImageIcon("./Board.gif").getImage();
public class PieceIcon extends JLabel {
public PieceIcon(String symbol)
System.out.println("./"+symbol+".jpg");
          pieceImage = new ImageIcon("./"+symbol+".jpg");
public void paintComponent(Graphics g)
          super.paintComponent(g);
          g.drawImage(pieceImage,playerBoardPos.getX(),playerBoardPos.getY(), this);
private Image pieceImage;
Main:
JPanel content = new JPanel();
PieceIcon testPiece = new PieceIcon("Dog");
BoardPanel boardIcon = new BoardPanel();
getContentPane().add(content, java.awt.BorderLayout.CENTER);
content.add(boardIcon, java.awt.BorderLayout.CENTER);
boardIcon.setLayout(new javax.swing.OverlayLayout(boardIcon));
boardIcon.add(testPiece);

Oh, and since you probably won't be needing a layout manager, try the following:
setLayout(null);
ChessPeice peice1 = new ChessPeice(...);
add(peice1);
peice1.setBounds(x, y, width, height);also, your ChessPeice paintComponent method should look more like:
... //in constructor
setPreferredSize(new Dimension(image.width, image.height));
setOpaque(false);
public void paintComponent(Graphics g){
   g.drawImage(...);
}Make sure that if you call the component's getSize method to determine the width and height you do it after pack has been called. If you call getSize before then, it will return 0 for the width and height values.
Another advantage to this approach is that the peices only draw in the areas they need to.
Hope this helps.

URGENT, Please help with calling one program in another

I am am trying to call Ch4Ex5 within Ch3Ex5. The teacher said it should take about 6 lines of modification within Ch3Ex5 to be able to call out Ch4Ex5. I also might need to modify Ch4Ex5 to get it to work. But I spent many hours and its due soon and I still cant figure it out. I think the teacher assigned this too early in the semester because most the kids dont know how to do it.
Here is Ch3Ex5
import java.util.*;
public class Ch3Ex5
 public static void main(String[] args)
 Scanner kb = new Scanner(System.in);
 int aCount = 0, bCount = 0, cCount = 0, dCount = 0, fCount = 0;
 int nScores = 0;
 int lowest, highest;
 int currentScore;
 int totalOfScores = 0;
 double average;
 do
 System.out.print("Enter a score (negative value to quit): ");
 currentScore = kb.nextInt();
 kb.nextLine();
 if(currentScore > 100)
 System.out.println("Scores cannot be greater than 100, please try again");
 } while(currentScore > 100);
 lowest = currentScore;
 highest = currentScore;
 while(currentScore > 0)
 nScores++;
 totalOfScores += currentScore;
 if(lowest > currentScore)
 lowest = currentScore;
 if(highest < currentScore)
 highest = currentScore;
 if((100 >= currentScore) && (currentScore >= 90)) aCount++;
 else if(currentScore >= 80) bCount++;
 else if(currentScore >= 70) cCount++;
 else if(currentScore >= 60) dCount++;
 else fCount++;
 do
 System.out.print("Enter a score (negative value to quit): ");
 currentScore = kb.nextInt();
 kb.nextLine();
 if(currentScore > 100)
 System.out.println("Scores cannot be greater than 100, please try again");
 } while(currentScore > 100);
 System.out.println("Number of scores: " + nScores);
 if(nScores > 0)
 System.out.println("Number of A's = " + aCount);
 System.out.println("Number of B's = " + bCount);
 System.out.println("Number of C's = " + cCount);
 System.out.println("Number of D's = " + dCount);
 System.out.println("Number of F's = " + fCount);
 System.out.println("Percent A's = "+(100.0*aCount/nScores));
 System.out.println("Percent B's = "+(100.0*bCount/nScores));
 System.out.println("Percent C's = "+(100.0*cCount/nScores));
 System.out.println("Percent D's = "+(100.0*dCount/nScores));
 System.out.println("Percent F's = "+(100.0*fCount/nScores));
 System.out.println("High score: " + highest);
 System.out.println("Low score: " + lowest);
 average = (double) totalOfScores / nScores;
 System.out.println("Average score = " + average);
import java.util.*;
public class Ch4Ex5
 public static void main(String[] args)
 Scanner kb = new Scanner(System.in);
 double gradeA, gradeB, gradeC, gradeD, gradeF, total;
 double aCount, bCount, cCount, dCount, fCount;
 System.out.println("Enter in the number of each grades");
 System.out.println("In this order, A's, B's, C's, D's, F's");
 gradeA = kb.nextDouble();
 gradeB = kb.nextDouble();
 gradeC = kb.nextDouble();
 gradeD = kb.nextDouble();
 gradeF = kb.nextDouble();
 System.out.println("0 10 20 30 40 50 60 70 80 90 100");
 System.out.println("| | | | | | | | | | |");
 System.out.println("***************************************************");
 total = gradeA + gradeB + gradeC + gradeD + gradeF;
 aCount = (((gradeA) / (total)) * 100);
 bCount = (((gradeB) / (total)) * 100);
 cCount = (((gradeC) / (total)) * 100);
 dCount = (((gradeD) / (total)) * 100);
 fCount = (((gradeF) / (total)) * 100);
 for (int i= 0; i < aCount; i = i +2)
 System.out.print('*');
 System.out.println("A");
 for (int i= 0; i < bCount; i = i +2)
 System.out.print('*');
 System.out.println("B");
 for (int i= 0; i < cCount; i = i +2)
 System.out.print('*');
 System.out.println("C");
 for (int i= 0; i < dCount; i = i +2)
 System.out.print('*');
 System.out.println("D");
 for (int i= 0; i < fCount; i = i +2)
 System.out.print('*');
 System.out.println("F");
}

Here's a tip for you: it doesn't really matter if you post in New to Java or Java Programming. Post once, be patient and you will get a reply. As I said keep up this style of posting and nobody will be willing to help you.
Why am I freaking out over double posting? Lets say Fred reads and replies in Thread A. Then Barney comes along and reads Thread B not knowing that Fred has already given an answer in Thread B. So Barney ends up wasting his time by posting the same answer in Thread B. Once again it aint rocket science!

URGENT please help with servlets

am using Jbuilder 3 and there is no servlet classs to import .imported JSDK and the javax files. but it keeps saying my class does not extend http servlet any ideas!!

I've used JBuilder3 a few times and as far as I remember the default Target jdk (version 1.2) cannot be changed or ammended and so you can't really import javax.servlet stuff.
Go to project -> properties.
You probably just need to define a new jdk version call it "JDK 12 Servlets" or something. It'll prompt you most of the way and then you just need to edit the Class path and add the javax stuff.
Alternatively you can just save the file with jbuilder and do the compiliation from the command line.
Hope this helps.

Urgent - please help with blank lines

Guys need you help, please.
How do I put blank lines in a repeating frame even if there are records or no(about 20 lines with say 5 columns). I need those lines like our ruled notebooks, for the users to enter something.
Thanks
Joe.

These are blank tabular columns(20 rows 5 col). These rows might have names and other details like a master/details relationship. if there are records in details then print all those details and the blank rows to fillup 20 rows. if there are no details then print those 20 blank rows/columns. i tried doing this with one repeating frame and increasing the number of rows value to 20, but then it stops at the point of the detail rows and does not put the blank rows (lines). so had to create 2 repeating frames.

Please help with new install

Superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem and not SWAP or UFS or something else, then the superblock is corrupt and you might try running e2sck with and alternate superblock: e2sck -b 8193 <device>
I get this error after a new install and reboot, any idea what this mean and how to fix it.
Appreciate all the help.
This is a AMD 1.8mgz and 1 gig of ram on Asus mb.

I just downloaded the image archlinux 2009.02 core i686 and was able to install with no issues. I was able to reboot successfully. It appears to be an issue with the newest installer specificly. turtle, try the old installer and see if you can't get things working. This should work for the OP too.
I got it to boot after an install for the first time using this older install image.
I wasted 8 freaking hours trying to figure out the problem and the answer is as simple as use the older installer. Shesh.
I was wrong. I installed once successfully in one of the computers on an 80 gb hard drive. When trying to reinstall on two different 120 gig hard drives the error repeated itself. I'm spent on this. I'm going to have to try another distro.
After two more installs I can get it to load but I'm now having a superblock last load time is in the future error.
Used fsck on all my partitions to fix the problem and now I have a successfully booting arch system. Guess I won't have to jump ship just yet.
------update, maybe this will help somebody----------
I'm not sure why but the partitions on my first disk are all referred to as sda and not hda even though all my hard drives are IDE (via command 'df', fstab has them listed by UID).
Even weirder, when I installed a new hard drive into the machine, I had to format it and mount it by referring to /dev/sdb and not /dev/hdb like I expected. This is odd as I don't even have any sata connections in my machine. Could someone tell me why this is happening. Is it a 'feature' or a 'bug' of arch?
lldmer, I wish I had listened to you when I was trying to install over and over the day before yesterday. Looks like you hit the nail on the head on this one. I wish I had tried what you suggested. The weird thing is that when I was originally having problems, the fstab did have the drives listed by UID. I wonder if changing those UID entries to /dev/sda style entries would have fixed my problems.
If I install arch again, I'll have to try that.
Last edited by bodyhead (2009-10-26 14:55:14)

Please help with new iphone

I have none contacts on my older mbp, though on my new iphone.
what happens really on syncing? will my contacts on my iphone been lost?

wjosten wrote:
From your initial post:
I have none contacts on my older mbp
From your second post:
there are three entries in my address book, we are speaking about address book on mbp
Which is it? Do you have entries in Address Book on your Mac or not? If you already have entries, when you do sync you will get a merge or replace prompt. Select Merge.
Which is it?
I have not used address book really, therefore; so the latter info -from today- is right.
I will try iSync, or would you check another application in this „special case“ of unexperienced users?
I have no idea what you are talking about here. Contact syncing is selected in iTunes.
› Before syncing with a supported contact application on your computer, …
My failure again, I thaught, for this special case to use another app;
now you and everyone know that I have my first iphone since hours.
Have a nice day,
Karl

Please help with new Ipad4

Hi, I can't get my Ipad4 to do anything. I set it up on Christmas when I was out of state at my mom's. Now it won't do anything at home. I can't even get the home page with the icons. Thanks for your help!

Disabled as in
http://support.apple.com/kb/HT1212
No other way disabling is a security feature
Lesson
keep kids away from iPads and backup in future
Oh and you will lose any data not backed up

Please help with new update

cant read text with ios7 even if i move slider up to full i had old style prob 48 or 56 please help

Make sure router is up to date. Reboot (ATV, router, computer). Check istumbler for interference.

URGENT Please help with weird behavior of test suite

Hi All,
I have a composite involving three operations of two different services. The weird behavior comes by the time on which I run the test suite on the EM, if I try to emulate two different operation response from one service, by the time that the flow, tries to emulate the second one, I always receive this error:
part name="summary">
<summary>oracle.fabric.common.FabricException: javax.wsdl.WSDLException: WSDLException: faultCode=OTHER_ERROR: Error writing stream: java.io.IOException: Can only write attribute within a tag.: WSDLException: faultCode=OTHER_ERROR: Error writing stream: java.io.IOException: Can only write attribute within a tag.</summary>
</part>
On the other hand if I emulate two responses of the same operation it works.
Does any one have any idea of how to deal with this kind of test? Which seems a very simple test.
Best regards,

Hi thanks for your response, in detail my problem is as follows:
1- I have a simple composite with two services and three invokes, all of the operations are two ways operations. Here´s the BPEL (Service1 Demandas, operation Actualizar; Service 2 Aviso, operations buscar, actualizar):
<scope name="SINAUT_Aviso_SRV_Demandas_Actualizar">
<bpelx:annotation xmlns:bpelx="http://schemas.oracle.com/bpel/extension">
<bpelx:pattern patternName="bpelx:automated"/>
<bpelx:analysis>
<bpelx:property name="LastUpdateDate">9/10/10 9:35:50 AM</bpelx:property>
<bpelx:property name="BusinessId">Scope_151babe7-bc1e-11df-3ca0-0015c5fce8ce</bpelx:property>
</bpelx:analysis>
</bpelx:annotation>
<sequence>
<bpelx:annotation xmlns:bpelx="http://schemas.oracle.com/bpel/extension">
<bpelx:analysis>
<bpelx:property name="BusinessId">Sequence_151babe7-bc1e-11df-3ca0-0015c5fce8ce</bpelx:property>
<bpelx:property name="LastUpdateDate">9/10/10 9:35:50 AM</bpelx:property>
</bpelx:analysis>
</bpelx:annotation>
<assign name="Assign_1">
<copy>
<from variable="inputVariable"
query="/client:process/client:input/idDemada"
part="payload"/>
<to variable="Invoke_2_actualizar_InputVariable"
part="payload" query="/payload/demanda/idDemanda"/>
</copy>
<copy>
<from variable="inputVariable"
query="/client:process/client:input/estadoDemanda/codigo"
part="payload"/>
<to variable="Invoke_2_actualizar_InputVariable"
part="payload"
query="/payload/demanda/estadoDemanda/codigo"/>
</copy>
</assign>
<invoke name="Invoke_2"
inputVariable="Invoke_2_actualizar_InputVariable"
outputVariable="Invoke_2_actualizar_OutputVariable"
partnerLink="SRV_Demandas"
portType="ns2:SINAUT_Aviso_SRV_Demandas"
operation="actualizar"/>
</sequence>
</scope>
<scope name="SINAUT_Aviso_SRV_Avisos_Actualizar">
<bpelx:annotation xmlns:bpelx="http://schemas.oracle.com/bpel/extension">
<bpelx:pattern patternName="bpelx:automated"/>
<bpelx:analysis>
<bpelx:property name="LastUpdateDate">9/10/10 9:35:57 AM</bpelx:property>
<bpelx:property name="BusinessId">Scope_c235386b-bc1f-11df-3ca0-0015c5fce8ce</bpelx:property>
</bpelx:analysis>
</bpelx:annotation>
<sequence>
<bpelx:annotation xmlns:bpelx="http://schemas.oracle.com/bpel/extension">
<bpelx:analysis>
<bpelx:property name="BusinessId">Sequence_c235386b-bc1f-11df-3ca0-0015c5fce8ce</bpelx:property>
<bpelx:property name="LastUpdateDate">9/10/10 9:35:57 AM</bpelx:property>
</bpelx:analysis>
</bpelx:annotation>
<assign name="Assign_2">
<copy>
<from variable="inputVariable"
query="/client:process/client:input/ReferenciaPly"
part="payload"/>
<to variable="Invoke_1_actualizar_InputVariable"
part="payload" query="/payload/aviso/referenciaPlyAviso"/>
</copy>
<copy>
<from variable="inputVariable"
query="/client:process/client:input/estadoAviso/codigo"
part="payload"/>
<to variable="Invoke_1_actualizar_InputVariable"
part="payload" query="/payload/aviso/estadoAviso/codigo"/>
</copy>
</assign>
<invoke name="Invoke_1"
inputVariable="Invoke_1_buscar_InputVariable_1"
outputVariable="Invoke_1_buscar_OutputVariable_1"
partnerLink="SRV_Aviso"
portType="ns1:SINAUT_Aviso_SRV_Avisos"
operation="buscar"/>
<assign name="Assign_4">
<copy>
<from expression="'12345'"/>
<to variable="Invoke_3_actualizar_InputVariable"
part="payload" query="/payload/aviso/referenciaPlyAviso"/>
</copy>
</assign>
<invoke name="Invoke_3"
inputVariable="Invoke_3_actualizar_InputVariable"
outputVariable="Invoke_3_actualizar_OutputVariable_1"
partnerLink="SRV_Aviso"
portType="ns1:SINAUT_Aviso_SRV_Avisos"
operation="actualizar"/>
</sequence>
</scope>
2- My test suite is as follows:
<wireActions wireSource="SINAUT_Aviso_PR_DemandasActualizar_TO_BE_/SRV_Demandas" operation="actualizar">
<emulate duration="PT0S">
<message>
<part partName="payload">
<content>
<payload xmlns=""/>
</content>
</part>
</message>
</emulate>
</wireActions>
<wireActions wireSource="SINAUT_Aviso_PR_DemandasActualizar_TO_BE_/SRV_Aviso" operation="buscar">
<emulate duration="PT0S">
<message>
<part partName="payload">
<filePath>prueba_busqueda.xml</filePath>
</part>
</message>
</emulate>
</wireActions>
<wireActions wireSource="SINAUT_Aviso_PR_DemandasActualizar_TO_BE_/SRV_Aviso" operation="actualizar">
<emulate duration="PT0S">
<message>
<part partName="payload">
<filePath>prueba_actualizar.xml</filePath>
</part>
</message>
</emulate>
</wireActions>
3- When the test suite executes the second operation of the second service it throws this exception:
<bpelFault><faultType>0</faultType><remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>oracle.fabric.common.FabricException: javax.wsdl.WSDLException: WSDLException: faultCode=OTHER_ERROR: Error writing stream: java.io.IOException: Can only write attribute within a tag.: WSDLException: faultCode=OTHER_ERROR: Error writing stream: java.io.IOException: Can only write attribute within a tag.</summary></part><part name="detail"><detail>Can only write attribute within a tag.</detail></part></remoteFault></bpelFault>
4- if I change the second operation with the first one(buscar), it doesn't throws any exception.
5- If this is a limitation , how can I test a composite that involves n operations of the same service?
Kind regards and thanks for all of your support

URGENT PLEASE HELP WITH A MUSIC FILE

Sorry for the urgency but this is last minute.
I need getting a music file to start playing on one slide and play through to about four slides.
What happens is the music will start playing but when I click to the next slide it stops playing.
Please Help

Yes, you will connect two separate Keynote files using the hyperlink function, found in the Hyperlink Inspector. You attach a hyperlink to text or an object (which can be set to be completely transparent), and then point the hyperlink to the other presentation. (When presenting, it is a good idea to have both presentations open, so there is no delay when you click the hyperlink.)

Urgent, Please help with new MIDI pedal

Similar Messages

Maybe you are looking for