URGENT!! Smartform : graphical edition impossible!

Hi,
I created a Smartform for Delivery Note with its print program in a newly upgraded ECC6.0 system. I customized in NACE in proper column.
When I try to print it via VL02N, the message is:
"Graphical edition impossible"
Does anyone know how to solve this problem??
Points rewarded immediately since its very urgent!
Tarick.

Hi again!
I found out the reason!
There was a graphic which was not uploaded properly in SE78...
Tarick.

Similar Messages

How-tos in graphic editing?

I have two questions:
1,
I need to know how to add this kind of effect in graphic editing (i.e to have the reflection of the object itself in the opposite direction). see this pic
http://jithonline.com/wp-img/DTSL1.gif
2,
How can I add (those smoother looking) high definition "HD" effect to an image? I have pics taken with non HD camera, and simply want such effect on them.
I have Adobe CS4 Suite, and I believe the above two can be accomplished with one or more of the applications in this suite. But just dont know how. I'm a newbie in graphics.
I need the very 1,2,3 basics,
Help please!

Thanks Scott, I will give the answer 1 a shot right away!
On question 2, pardon me as I'm not a pro. but a beginner. I guess what I was going to say was "image resolution"
So what I really meant is to edit or transform an image of this level of quality (resolution)
http://www.statesymbolsusa.org/IMAGES/Statue-of-liberty2.jpg
to an image of this level of quality
http://cari373.files.wordpress.com/2010/03/statue-of-liberty-address1.jpg
I know it may not be a one-click-magic, but the very basics of what to do (in Fireworks or any other of CS4 suite) in refining an image to improve its look

Exporting PDF document to Excel. When I export a PDF document to Excel containing lists of people the Excel page shows all the names on one line several inches deep instead of on separate lines which makes editing impossible. What am I doing wrong?

Exporting PDF document to Excel. When I export a PDF document to Excel containing lists of people the Excel page shows all the names on one line several inches deep instead of on separate lines which makes editing impossible. What am I doing wrong?

Murray is right. Padding (and margins) is added to the width. However, when using percentages, you should never use figures that add up to exactly 100%.
Browsers need to convert the percentages to pixels. Because pixels must be whole numbers, some percentages are rounded up, which results in the final element dropping down below its neighbours. With percentages, it's much safer to use values that add up to 98% (99% often works, but 98% is safer).

New Satellite C660-1F1 windows 64-bit -cant use graphics editing software

Hi Guys....any help appreciated...this is the message I sent to Toshiba support but they are taking their time getting back to me:
Important information: Satellite C660-1F1
Key Features
- Genuine Windows 7 Home Premium 64-bit (pre-installed, Toshiba-HDD recovery)
- Intel Core i3-380M Processor
- DVD-SuperMulti +-R (Double Layer)
- 2048 MB DDR3 RAM (1066MHz)
- 39.6cm (15.6") TruBrite HD (1366 x 768) High Brightness display with LED backlight with 16:9 aspect ratio
Hi... I purchased my laptop about a month ago from Argos and it has a 2 year warranty. I have one big problem - the 2 main graphics editing programmes that I use do not work. Both Corel Paintshop Photo Pro x3 and Adobe CS5 can both be installed and opened but as soon as I try to save a photo or edit a photo both of the programmes crash and i have to close it down by using end task in task manager.
This happened when I installed the full versions of both programmes which I purchased and it also happens when you download the trial versions from both the Corel and the Adobe download sites. I have been on so many help forums for both adobe and corel and the most helpful pointer came from one of the designers at Adobe - a Chris Cox.
He very logically stated that as it happened in both of these 2 graphics editing packages that it was most likely a problem with the graphics card drivers or the actual graphics card hardware. I purchased a 64-bit operating system to handle precisely these 2 programmes which can be exhausting on the system. I know i only have 2 GB RAM at the moment but it has been happening with other people...some who even have 8GB and 16GB of RAM which is what I will have in the next few weeks. However, not if I cannot rectify this problem. Please can you help/advise the best solution. This seems to be a problem only with the 64-bit systems. Both Adobe and Corel are 64-bit compatible.
There is also a message that appears when I open Adobe Photoshop CS5 Extended....which is as follows:
...."Photoshop has encountered a problem with the display driver, and has temporarily disabled GPU enhancements, Check the video card manufacturers website for the latest software."
I then click that message away ....use the programme, edit something, try to save and it crashes. I have gone through all troubleshooting directions and ran countless diagnostics but there only seems to be one common denominator between the 2 different programmes and that is my Toshiba laptop.... I even tried installing another large photo editing software package to test it and I had the same result - an application crash.
Please help! Thanking you in advance.
Kind regards
John

Hello John
Have you already got some answer from Toshiba?
What to say my friend? In my opinion the best advice you can get from Corel and Adobe. They have best experience with own product and have probably tested them on different hardware platforms.
Notebook manufacturers offer different notebook models with different hardware configurations. Some of them are cheap and offered with average hardware. The performance is not the best but good enough for every day activities like internet, office, mailing and so on.
On other hand there are notebooks with excellent and powerful hardware. Very often such notebooks cost twice as much as cheap low budget products.
Please dont understand me wrong but your C notebook is not the best one for usage with such powerful software.
I really dont know what Toshiba can do about it. I can imagine that you need other graphic driver but graphic driver support for mobile computers is pretty limited and I dont think you can do much about that.
What you can try is to download and install driver from graphic card manufacturer but you must do this on your own risk.
Sorry friend but I dont have any other advice for you. I just think youve bought wrong notebook for such complex graphic operations. 2 GB RAM? I dont know.
Good luck.

XML graphical editing

I have a LARGE xml file that is basically a people directory.
Fields like Fname, Lname, bio, etc. need to be edited. Is there
ANYTHING out there (plugin?? complete software program??) that will
let me edit the xml file in a simple GUI sort of like *gasp, I
know* MS Access does? I'd honestly prefer a plugin or something for
Dreamweaver as that's what I use. Thanks!

Originally posted by: pb158.tlen.pl
non official but work very well on Eclipse 3.3.0 and windows
Vista/Longhorn :)
http://www.ehecht.com/eclipse_ve/ve.html
Ed Merks wrote:
> Margaret,
>
> It's best to use the VE newsgroup to ask about VE. I've added it to the
> "to" list of the reply. Have you been grabbing the special version
> that folks have put together to support Eclipse 3.3? You'll see there
> is a lot of discussion in the VE newsgroup about starting up a new set
> of active comitters to provide the 3.3 support.
>
> Margaret Gilmore wrote:
>> Hello, I currently use Java 2 JS2E 5.0, Update 12, with Eclipse. I
>> upgraded from Eclipse 3.1.0 to Eclipse SDK 3.3.0 today because I could
>> not find the visual editor in the 3.1.0 version. The download was
>> successful, and I can open a file in the visual editor (VE); however,
>> the tab for the palette used in VE comes up blank, and none of the
>> tools show up.
>>
>> I have been unsuccessful in solving this problem. I downloaded plugin
>> updates for OCL and UML errors earlier today and now new updates from
>> download manager will not install:
>>
>> These are the updates that cannot install are:
>> --http://update.eclipse.org/updates/3.3/site.xml
>> --Graphical Editing Framework (GEF) Update Side
>>
>> And the following error message is given as to the reason why:
>>
>> "OCL 2.0 Binding for UML (1.2.0.v200709211511-11-7w31181_322622)
>> requires plug-in "org.eclipse.uml2.uml (2.1.0)", or equivalent."
>>
>> I am not sure whether the palette issue and now these two updates are
>> related but I can't be sure. Does anyone have any thoughts on how I
>> might be able to fix the palette problem and the error message issue.
>>
>> Thank you!
>>
>>

Smartform-graphics

Hi All,
I upload the TIFF format image thru the SAP standard program "RSTXLDMC" and now i need to display this image into my smartform. How can I use this image in smartform?
Can I see this image which I upload thru standard program?
My Main Question I am repeating again that how to use this image in smartform?
Thanks & Regards,
Jaten Sangal

Hi ,
If you are following the same steps :
se78 : to import the tiff file
then in smartforms using create-graphics
then you are going good . This should not lead you to the error . I think error reason would be something else.Might be something related tro size , is your image very big ?\
Please see have you successfully uploaded your image in SAP?
I am looking for it meanwhile you can try uploading another short image.
also refer this
Upload .TIF images in SE78
Regarding Smartform output Issue....(very Urgent)
Problem with SMARTFORM.
Regards,
Uma Dave
Edited by: UmaDave on Jun 14, 2010 11:34 AM
Edited by: UmaDave on Jun 14, 2010 11:34 AM

Urgent: smartform tutorials

hi,
i am new to the smart frms i want to have tutorials which are easy to understand and can be practised.
points will be definately rewarded.

Hi
How to create a New smartfrom, it is having step by step procedure
http://sap.niraj.tripod.com/id67.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Here is the procedure
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Smartform
you can check this link here you can see the steps and you can do it the same by looking at it..
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SMARTFORMS STEPS.
1. In Tcode se11 Create a structure(struct) same like the Internal table that you are going to use in your report.
2. Create Table type(t_struct) of stracture in se11.
3. In your program declare Internal table(Itab) type table of structure(struct).
4. Define work area(wa) like line of internal table.
5. Open Tcode Smartforms
6. In form Global setting , forminterface Import parameter define Internal table(Itab) like table type of stracture(t_struct).
7. In form Global setting , Global definitions , in Global data define Work area(wa) like type stracture(struct).
8. In form pages and window, create Page node by default Page1 is available.
9. In page node you can create numbers of secondary window. But in form there is only one Main window.
10. By right click on page you can create windows or Go to Edit, Node, Create.
11. After creating the window right click on window create table for displaying the data that you are passing through internal table.
12. In the table Data parameter, loop internal internal table (Itab) into work area(wa).
13. In table there are three areas Header, Main Area, Footer.
14. Right click on the Main area create table line by default line type1 is there select it.
15. Divide line into cells according to your need then for each cell create Text node.
16. In text node general attribute. Write down fields of your work area(wa) or write any thing you want to display.
17. Save form and activate it.
18. Then go to Environment, function module name, there you get the name of function module copy it.
19. In your program call the function module that you have copied from your form.
20. In your program in exporting parameter of function pass the internal table(itab).
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.
SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
To print a form, you need a program for data retrieval and a Smart Form that contains the entire from logic. As data retrieval and form logic are separated, you must only adapt the Smart Form if changes to the form logic are necessary. The application program passes the data via a function module interface to the Smart Form. When activating the Smart Form, the system automatically generates a function module. At runtime, the system processes this function module.
You can insert static and dynamic tables. This includes line feeds in individual table cells, triggering events for table headings and subtotals, and sorting data before output.
You can check individual nodes as well as the entire form and find any existing errors in the tree structure. The data flow analysis checks whether all fields (variables) have a defined value at the moment they are displayed.
SAP Smart Forms allow you to include graphics, which you can display either as part of the form or as background graphics. You use background graphics to copy the layout of an existing (scanned) form or to lend forms a company-specific look. During printout, you can suppress the background graphic, if desired.
SAP Smart Forms also support postage optimizing.
Also read SAP Note No. 168368 - Smart Forms: New form tool in Release 4.6C
What Transaction to start SAP Smart Forms?
Execute transaction SMARTFORMS to start SAP Smart Forms.
Key Benefits of SAP Smart Forms:
SAP Smart Forms allows you to reduce considerably the implementation costs of mySAP.com solutions since forms can be adjusted in minimum time.
You design a form using the graphical Form Painter and the graphical Table Painter. The form logic is represented by a hierarchy structure (tree structure) that consists of individual nodes, such as nodes for global settings, nodes for texts, nodes for output tables, or nodes for graphics.
To make changes, use Drag & Drop, Copy & Paste, and select different attributes.
These actions do not include writing of coding lines or using a Script language.
Using your form description maintained in the Form Builder, Smart Forms generates a function module that encapsulates layout, content and form logic. So you do not need a group of function modules to print a form, but only one.
For Web publishing, the system provides a generated XML output of the processed form.
Smart Forms provides a data stream called XML for Smart Forms (XSF) to allow the use of 3rd party printing tools. XSF passes form content from R/3 to an external product without passing any layout information about the Smart Form.
SmartForms System Fields
Within a form you can use the field string SFSY with its system fields. During form processing the system replaces these fields with the corresponding values. The field values come from the SAP System or are results of the processing.
System fields of Smart Forms
&SFSY-DATE&
Displays the date. You determine the display format in the user master record.
&SFSY-TIME&
Displays the time of day in the form HH:MM:SS.
&SFSY-PAGE&
Inserts the number of the current print page into the text. You determine the format of the page number (for example, Arabic, numeric) in the page node.
&SFSY-FORMPAGES&
Displays the total number of pages for the currently processed form. This allows you to include texts such as'Page x of y' into your output.
&SFSY-JOBPAGES&
Contains the total page number of all forms in the currently processed print request.
&SFSY-WINDOWNAME&
Contains the name of the current window (string in the Window field)
&SFSY-PAGENAME&
Contains the name of the current page (string in the Page field)
&SFSY-PAGEBREAK&
Is set to 'X' after a page break (either automatic Page 7 or command-controlled Page 46)
&SFSY-MAINEND&
Is set as soon as processing of the main window on the current page ends
&SFSY-EXCEPTION&
Contains the name of the raised exception. You must trigger your own exceptions, which you defined in the form interface, using the user_exception macro (syntax: user_exception <exception name >).
Example Forms Available in Standard SAP R/3
SF_EXAMPLE_01
Simple example; invoice with table output of flight booking for one customer
SF_EXAMPLE_02
Similar to SF_EXAMPLE_01 but with subtotals
SF_EXAMPLE_03
Similar to SF_EXAMPLE_02, whereby several customers are selected in the application program; the form is called for each customer and all form outputs are included in an output request
Advantages of SAP Smart Forms
SAP Smart Forms have the following advantages:
1. The adaption of forms is supported to a large extent by graphic tools for layout and logic, so that no programming knowledge is necessary (at least 90% of all adjustments). Therefore, power user forms can also make configurations for your business processes with data from an SAP system. Consultants are only required in special cases.
2. Displaying table structures (dynamic framing of texts)
3. Output of background graphics, for form design in particular the use of templates which were scanned.
4. Colored output of texts
5. User-friendly and integrated Form Painter for the graphical design of forms
6. Graphical Table Painter for drawing tables
7. Reusing Font and paragraph formats in forms (Smart Styles)
8. Data interface in XML format (XML for Smart Forms, in short XSF)
9. Form translation is supported by standard translation tools
10. Flexible reuse of text modules
11. HTML output of forms (Basis release 6.10)
12. Interactive Web forms with input fields, pushbuttons, radio buttons, etc. (Basis-Release 6.10)
for Smartforms material
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/smartform-tutorial.htm
http://www.sapgenie.com/abap/smartforms.htm
How to trace smartform
http://help.sap.com/saphelp_47x200/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
http://www.help.sap.com/bp_presmartformsv1500/DOCU/OVIEW_EN.PDF
http://www.sap-img.com/smartforms/smart-006.htm
http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
Re: Need FAQ's
check most imp link
http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Subtotals - Check the link...
Re: Subtotal with Table Node in smartforms
You can use the PROGRAM LINES node to calculate the page totals in Table node.
for migrating scripts to smart forms please follow the link
http://help.sap.com/saphelp_nw2004s/helpdata/en/9d/9599386185c064e10000009b38f8cf/content.htm
Thanks,
usha
Reward points if useful.

Smartform Graphic Probelm

hi,
how to transfer graphics uploaded via tcode OAAD(archive link) into SE78 for display in smartform..
can we display graphics uploaded via archive link direclty on smartform..
<removed_by_moderator>
Edited by: abapuser on Nov 11, 2008 10:59 AM
Edited by: Julius Bussche on Nov 11, 2008 11:36 AM

Hi,
you have to upload the image through SE78 tcode ...and the image should me one Bit Map Image...i.e .bmp format...then you can include that in your smart form.
Arunima

What's the best MacBook for basic graphic editing?

Hi there,
I've been saving up to finally get a MacBook after having a pro during university (stupidly it got soaked in my bag during a thunderstorm and didn't have any insurance on it). However, I'm trying to save as much money as I can so can't afford the high end laptops.
All I need for the MacBook to do is run the following programs without it becoming slow in the long run:
Adobe Photoshop CC
Adobe Dreamweaver CC
Adobe InDesign CC
Microsoft Office Home & Business
The basic system requirements for the Adobe CC programs are:
Multicore Intel processor with 64-bit support
Mac OS X v10.7, v10.8, or v10.9
2GB of RAM
3.2GB of available hard-disk space
1280x1024 display with 16-bit video card
QuickTime 7.6.6 software required for HTML5 media playback
All I need it for is templating and editing newsletters as well as creative posters/flyers/brochures.
I'm deciding whether I should just get the basic 13-inch MacBook Air, 13-inch Macbook Pro (with Retina display) or 2.5GHz Mac mini? Bear in mind that I'll have to purchase the Micrsoft Office program (approx. £157 on Amazon) & get a screen/keyboard/mouse with the Mac Mini).
I have around £1,000 to spend and really unsure as to what to buy.
Please note, I am not interested in buying a Windows equivelant (as I cannot stand Windows 8/8.1).
Thanks!

Any of those Macs will meet the basic specs for Office and Adobe. The real question is how you configure what you buy, based on how you are going to use the programs. The system requirements listed are definitely basic. They are about as basic as saying that you could buy a 2-seater Smart Car as your transportation: You could, but you'd be very limited in what you could do.
If you are going to run any one program at a time, the base model of any of those Macs (4GB RAM) will be fine. But working on newsletters and flyers, for efficiency's sake you will probably have more than one program open at a time: Word for preparing text, Photoshop for preparing photos, and Dreamweaver or InDesign where you lay it all out, going back and forth between them. That increases your RAM needs. 8GB would be a good place to be, but if you can afford to buy with the maximum amount of RAM that would help future-proof the Mac (since future versions of software always need more RAM, not less).
Having more RAM is more critical if you plan to use Photoshop for fancy stuff like cameras with lots of megapixels, raw editing, panoramas, HDR, or 3D. If you are just doing basic photo editing, 8GB RAM is fine. The other software you listed doesn't need as much RAM so more than one of them will run fine together under 8GB RAM.
If you get a MacBook Air or MacBook Pro, they start with only 128GB storage and it cannot be upgraded. That might not be enough space in the long run if you use a lot of graphics files and photos, so think about specifying at least 256GB storage in whatever you buy if your newsletter projects are large and you don't want to store them on external drives. The Mac mini starts out with a nice big hard drive.
What it will probably come down to is, spec out all three models you are considering with at least 8GB RAM and as much storage as you will need during the life of the computer, then pick the one that fits your budget. If you need portability, cross off the Mac mini.

Get looped SMARTFORMs Graphic via WD

Hi Experts,
i want to get a looped graphic (table containing a text has been constructed in Smartforms) in the PDF.
the table will be filled with a text( 10 till 1000 words) in a textedit UI-elemt( dynamic textedit with type TLINE). so each time the user click on 'write text' Button, a new textedit appears and the user can write his text there. in the end if the user have wrote 10 times texts in textedit UI-element( means 10 textedit UI-element will appear in Portal) this should also in the PDF appears.
the coding is following, but i dont know where i have to make changes or where shall make loop?
i hope that everything is clear for you ,
DATA: fm_name TYPE rs38l_fnam,
        ls_contp TYPE ssfctrlop,
        ls_output TYPE ssfcompop,
        ls_output_data TYPE ssfcrescl,
        tab_otf_final TYPE TABLE OF itcoo.
DATA : bin_filesize TYPE i,
          bin_file      TYPE xstring,
          pdf_tab       TYPE TABLE OF tline.
Set the output parameters
ls_output_options-tdprinter = 'PDF1'.
set control parameters to get the output format (OTF) from Smart Forms
ls_contp-no_dialog = 'X'.
ls_contp-getotf = 'X'.
ls_contp-preview = 'X'.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'Z_TAD_PAP'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
fm_name = fm_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3
CALL FUNCTION fm_name
    EXPORTING
      control_parameters = ls_control_parameters
      output_options     = ls_output
      user_settings      = space
    IMPORTING
      job_output_info    = ls_output_data
    TABLES
      z_tad_pap_data     = lt_table (this table is containing my data )
    EXCEPTIONS
      formatting_error   = 1
      internal_error     = 2
      send_error         = 3
      user_canceled      = 4
      OTHERS             = 5.
tab_otf_final[] = ls_output_data-otfdata[].
" Convert OTF data into PDF data
CALL FUNCTION 'CONVERT_OTF'
    EXPORTING
      format                = 'PDF'
      max_linewidth         = 132
    IMPORTING
      bin_filesize          = bin_filesize
      bin_file              = bin_file
    TABLES
      otf                   = tab_otf_final
      lines                 = pdf_tab
    EXCEPTIONS
      err_max_linewidth     = 1
      err_format            = 2
      err_conv_not_possible = 3
      err_bad_otf           = 4
      OTHERS                = 5.
cl_wd_runtime_services=>attach_file_to_response(
i_filename      = 'mail.pdf'
i_content       = bin_file
i_mime_type   =   '/Desktop').
thank you for help

hi Kowluri,
sorry that i didnt answer you so quik, i was busy with other stuff.
well, what i am looking for, is how to fill my table in SMATRFORMS from WD, i already have an internal Table that contains the data, (this table contains only the data for one textedit UI-elements).
the problem is , this component (table) in smartforms , should be called more than one time ( the same component) . if the user have wrote 2 or 3 or 4 texts ( each textedit UI-elemet contains a text in the Portal), all of those texts should be displayed on the PDF , and this component(table) in SMARTFORMS should be called each time for each text.
i hope that everything is clear, if not , i will explain more
Best Regards
Natel

Newer MBA or Older MBP for light - moderate music, video, and graphic editing

Essentially I would be using it for the following:
Word Processing (ms office suite)
Video editing (primarily YT videos) via FCP X
Music editing / production via Garageband, Logic Pro, and Melodyne
Adobe Photoshop CS6 (nothing to heavy like I said willing to live without retina)
Probably light gaming
Coding ( I don't think this should be an issue, but want the ability to write apps for iOS)
Web surfing obviously
Building itunes library
It seems like a bit now that I look at it, but I don't think I would have more than two of these programs running at the same time (my guess is the worst would be fcpx, garageband, and cs6 all open at the same time). I have a 500GB western digital external HD that is practically empty minus a recent backup of all my files on my current computer.
Which do you think would fit my needs more? Portability is a factor for me but I think the mba is like 1/2 a pound lighter or something which I'm not sure makes a huge difference to me since I'm currently lugging around a 15" pc that is around 7-8lbs.
So I've kind of figured that 256 gb ssd is probably going to be the most I can afford with a budget of $1190 and under ( could I get away with 128gb with my 500gb external hd?).
I know I can get the ssd and ram (at least 8GB unless 4GB would suffice) I need with a MBA but I do not know if the processor will be good enough for everything i'm planning to do. I've seen older MBP (circa 2011-2012) that has adequate ram (8-16gb) minus a ssd but regular hd with 500-700gb in some cases 1 TB. I've seen these for less than 1000 on ebay.
So which is a better choice? I don't want a system that is too old. I currently have a working cd/dvdr drive on my pc so I could live without having a cd/dvd drive in my mac or superdrive or whatever.
I'm interested in brand new or refurbished (either by apple or seller). Nothing used. An SD slot would also be nice to have but I'm unsure as to which models have them.

From what I see on Twitter and blogs, a lot of photography pros are picking up the new MacBook Airs as their road machines because with the new Core iX processors they are quite acceptable for performance. I've mostly read about them using Lightroom, though, and not as a primary machine, so you should take some of your raw photos to an Apple store and run some Aperture tests to see how it feels. Do you think there is enough room to see everything, or does it feel cramped?
The main problem with the MacBook Air is not being able to put more than 4GB RAM in it, but with the SSD you might not notice the lag as much. For most people the Air is a fantastic computer. I use the 15" MacBook Pro, because I use other graphics apps where I need room to display documents, filmstrips, palettes, etc. so I need mor pixels, and also because I need to be able to have more RAM.
I would guess that GarageBand wouldn't be a problem on any new Mac, assuming you're not piling on heaps of effects.

Help with graphic editing

I think I have gotten myself in over my head. I am using the
FreeHand software, & I know absolutely NOTHING about graphic
design or this program. So, I'm hoping that someone with some
patience can help me out. I have downloaded a vector image & am
trying to edit it. The picture is of a flower. I basically only
need to change the background color & to change the overall
color of the flower. I have no idea where to begin. Any help?
Thanks!!!

Even though you have downloaded a vector illustration if it
was saved as
an EPS and brought into FH then it may or not be editable at
that point.
If it looks and acts like one piece of artwork (cannot
select
separate parts of it) and you cannot "Ungroup" it (Select art
> Edit >
Ungroup) then you are probably dealing with an EPS that FH
cannot edit.
Go to the Object Inspector and see what it says it is at the
top of
the panel when the artwork is selected. If it says Group or
Path or
Compound Path then you can edit. If it says EPS then you
can't edit.
You will need to crack it by using Illustrator or Distilling
to PDF. If
you are on a Mac you can open the EPS into the application
Preview and
it will make it a PDF. Then save it as a PDF from Preview and
open in
FreeHand.
Good Luck,
Rich
Dani0628 wrote:
> I think I have gotten myself in over my head. I am using
the FreeHand
> software, & I know absolutely NOTHING about graphic
design or this program. So,
> I'm hoping that someone with some patience can help me
out. I have downloaded
> a vector image & am trying to edit it. The picture
is of a flower. I
> basically only need to change the background color &
to change the overall
> color of the flower. I have no idea where to begin. Any
help? Thanks!!!
>

Smartform graphic error

Hi,
I uploaded a color graphic bitmap correctly - 100 DPI and with 'reserve height aut' and 'resides in the printer memory' options checked. I can preview it on the T/SE78.
I created the graphic on the Page1 of the smartform with the same above attributes. However in the print preview of the smartform the graphic looks just like a one-color-square.
Can you tell me what I'm doing wrong?
Thanks in advance.

Hi Sonia,
are you sure to have select the radio button to BCOL and not BMON in the Graphic option in the smartforms ?
Rgd
Frédéric

How do I convert a bitmap/jpg type image to vector graphics/editable outline?

Corel Draw 5 did this very nicely but it's obsolete and I can't load it onto this machine (HP all-in-one Pavilion desktop with Windows 8).
I am working with hand-drawn images but since I need to manipulate the outline/s with a 4 - 12 pixel tool, it would be great to just be editing nodes instead. Creating the image from scratch as a vector graphic would be a horrible large amount of work and is not feasible at this time.
Is there any way other than Corel Draw 5 to make the conversion from bitmap-type images to editable vector graphics, ie: editable nodes?
Thanks.
PS - I don't have $700 - $1000 to spend on software at this point but do have Photoshop Elements 11, Premiere 11 and Lightroom, plus GIMP and the usual. Where should I start?

For occasional conversions, did you consider 'online bitmap to vector' conversions ? Do a Google search for that.
For more advanced and free solution, consider inkscape. It's a real vector drawing tool and can convert bitmaps.

Activation serveur digital editions impossible

bjr
malgre ID avec identifiants,
impossible de se connecter au serveur d'activation*et ce avec une bonne connection internet
comment resoudre ce probleme ??
impossible donc de teecharger un ebook sur liseuse!
merci

forse ...
~ ~ ~ ~ ~
A volte ADE prende la sua registrazione / attivazione confuso e in uno stato di semi-autorizzata.
Disinstallare e reinstallare non aiuta.
Purtroppo, dà spesso poi i messaggi di errore fuorvianti su ciò che è sbagliato.
Un messaggio errato comune informa che la ID è già in uso su un altro computer e non può essere riutilizzato.
Un altro è "E_AUTH_NOT_READY"
Questo spesso può essere risolto rimuovendo completamente qualsiasi autorizzazione con ctrl-shift-D alla schermata Library su ADE (cmd-shift-D se su Mac).
Riavviare ADE, e quindi autorizzare nuovamente con il (vecchio) Adobe ID.
In casi estremi sul mac, il seguente passo in più ha aiutato alcune persone. Passare a / Users / / Library / Application Support / Adobe / Digital Editions e trascinare il file activation.dat nel cestino. Se si utilizza 10.7, vedere i file di libreria di accesso utente nascosto | Mac OS 10.7 Lion. http://forums.adobe.com/thread/1265248?tstart=0
possibly ...
~~~~~
Sometimes ADE gets its registration/activation confused and in a semi-authorized state.
Uninstalling and reinstalling does not help.
Unfortunately, it often then gives misleading error messages about what is wrong.
A common incorrect message informs you that the ID is already in use on another computer and cannot be reused.
Another is "E_AUTH_NOT_READY"
This can often be resolved by completely removing any authorization using ctrl-shift-D to the Library screen on ADE (cmd-shift-D if on Mac).
Restart ADE, and then reauthorize with your (old) Adobe ID.
In extreme cases on the mac, the following extra step has helped some people. Navigate to /Users//Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash. If you are using 10.7, see Access hidden user library files | Mac OS 10.7 Lion. http://forums.adobe.com/thread/1265248?tstart=0

URGENT!! Smartform : graphical edition impossible!

Similar Messages

Maybe you are looking for