URGENT! url services portets do not render anything

I have followed the steps to install sample url services and tested successfully the provider. When I try to access them, I do not see anything.
I even changed one of the pageUrl's to a url located in my own webserver to make sure I am able to access the url.
I still do not see anything.
I checked the Jserv log and found the following errors.
[25/06/2002 18:54:49:983 CDT] page/JNI: mMode=IGNORE. Cache write but cannot open for write.
[25/06/2002 18:56:02:907 CDT] urlsample/Entering URLSecurityManager hasAccess(Portlet,ProviderUser) *****************
[25/06/2002 18:56:02:907 CDT] urlsample/Entering URLSecurityManager hasAccess(PortletReference,ProviderUser) *****************
[25/06/2002 18:56:02:907 CDT] urlsample/Entering URLSecurityManager hasAccess(Portlet,ProviderUser) *****************
[25/06/2002 18:56:02:917 CDT] urlsample/renderBody : Entering render ********************************
[25/06/2002 18:56:02:917 CDT] urlsample/getURLStream Inside
[25/06/2002 18:56:02:927 CDT] urlsample/Response status: 500 : oracle.portal.provider.v1.AccessControlException: Failed to read contents from : http://www.stardeveloper.com/activeserverpages.asp
     at oracle.portal.provider.v1.ContainerException.fillInStackTrace(ContainerException.java:58)
     at java.lang.Throwable.<init>(Throwable.java, Compiled Code)
     at java.lang.Exception.<init>(Exception.java, Compiled Code)
     at oracle.portal.provider.v1.ContainerException.<init>(ContainerException.java:19)
     at oracle.portal.provider.v1.PortletException.<init>(PortletException.java:13)
     at oracle.portal.provider.v1.AccessControlException.<init>(AccessControlException.java:16)
     at oracle.portal.provider.v1.http.URLRenderer.getURLStream(URLRenderer.java:579)
     at oracle.portal.provider.v1.http.URLRenderer.renderBody(URLRenderer.java:292)
     at oracle.portal.provider.v1.RenderManager.render(RenderManager.java:165)
     at oracle.portal.provider.v1.http.ServletProviderResponse.showPortlet(ServletProviderResponse.java:524)
     at oracle.portal.provider.v1.http.HttpProvider.dispatchProviderAction(HttpProvider.java:660)
     at oracle.portal.provider.v1.http.HttpProvider.service(HttpProvider.java:390)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
     at org.apache.jserv.JServConnection.processRequest(JServConnection.java:435)
     at org.apache.jserv.JServConnection.run(JServConnection.java, Compiled Code)
     at java.lang.Thread.run(Thread.java:479)
Can anyone please advice on what am I doing wrong. I followed the exact steps in the installation guide.
I am kind of stuck with this.
Thanks in advance,
Mainak

Mainak,
Looks like the correct proxy configuration information is not
specified in provider.xml. If you need proxy to view external urls
then the same needs to be specified through provider.xml.
For example,
     <proxyInfo class="oracle.portal.provider.v1.http.ProxyInformation">
          <httpProxyHost>YOUR_PROXY_SERVER</httpProxyHost>
          <httpProxyPort>YOUR_PROXY_PORT</httpProxyPort>
     </proxyInfo>
-aMJAD.

Similar Messages

Urgent web service problem. can not find url of WSDL

Hi all,
I met a web service problem recently.
1 I have set up a web service and reside it on Java System Application server9.0. But there's a bug of this web server, which will stop after the user log off the server. I have installed the Application server as a windows service. It suppose to run all the time. I don't know why the server stop after I log off.
2 For that reason, I tried to migrant my web service from the java application server to Tomcat5.5. I deployed my web service to folder webApps. But I don't know the WSDL url of the web service, which is the web reference for my frent-end c#.net application.
Anybody can give me some idea?
Many thanks

Nobody knows?
Please help me

10.4.5 404 Not Found The server has not found anything matching Request URL

hello all.. :)
i have problem with server, when i'm loading and make link to another page...
i got error like this...
*10.4.5 404 Not Found*
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
anyone help me...
thx
agungdmt

I read the 6.1 doc, it did said there is an editing tool for deployment
descriptor.
But I can't find it.
Thanks,
Michael Girdley wrote:
This tool has been removed. In 6.1, this summer, we're adding features to
replace it.
Michael Girdley
BEA Systems
Learning WebLogic? http://learnweblogic.com
"Daniele" <[email protected]> wrote in message
news:3b139510$[email protected]..
Good morning,
I read in the documentation of WebLogicBuilder Tool, that u can downloadit at
the URL :
http://developer.bea.com/circuit/code.html
but the response of the browser is
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URL. No indicationis given
as to whether the condition is temporary or permanent.
If you typed in the URL location manually, please doublecheck what youtyped.
You may be able to find what you were looking for by following one ofthese links:
BEA Developer Center
BEA Systems
Please adjust your bookmarks accordingly to avoid getting this erroragain, or
notify the administrator of the site whose link you followed to get here.
How can I find it!!

After downloading service pack 1 for Windows 7 Firefox did not respond anymore (I got the startscreen, but could not do anything, it "hang"), after a roll back Firefox did work again: are Firefox and SP1 incompatible?

After implementing SP1 for Windows 7 Firefox "hang"(I got the startscreen, but could not do anything: no response). After a roll back removing SP1 Firefox works again.
I installed SP1 also some months ago and had the same problems, also then this was solved also by a roll back removing SP1.
Does Firefox have problems in combination with SP1? How to solve this? Thanks.

Followed the given advice: installed SP1 again, ran Firefox in safemode, disabled other running programs as mutorrent, still Firefox didnt work. I had internetconnection (after restarting mutorrent this did work, the app telling me what the weather outside is worked) but no Firefox: as previous time I got the start screen, but could not browse the internet.
I also tried to start the Internet Explorer and it also looked as if that application had problems (but that can also be because I did not use it for a while - old version or whatever - and it is not my standard browser).
Have again performed a roll back in order to remove SP1, now Firefox works again.
If somebody has advice it would be very welcome!

Url service data control - problem while POSTing to a restful webservice

Hi,
I am trying to call a restful webservice to add a new employee .I have created the url service data control. The service method consumes XML.
When i am creating the url service datacontrol I selected the http method as POST and giving the servicepath and servicename as the source. After providing the xsd's path and all , when I test the url connection, I am getting the following error message:
URL Test: Received Error: Method Not Allowed
This might be because the clicking of the test url button is sending the get request, but the actual method is POST.
Now under the data controls navigator, If i view the newly created data control, i could see the loadData(Object) method which i assume is for retrieving the data from the service. But since i have mentioned the method as POST, why such a method is created? Also if its there, can I use the same for insert and update? I have used this loadData (Object) method to create a button which calls the webservice upon click. Under the data control property inspector, i changed the supportsupdate attribute's value to true. But when i am trying to save the employee from the jspx page, I am getting the following message in the integrated weblogic's log
Couldn't get access to the data source. Cause Unsupported Media Type exception in rest service
And on the server side I am getting the following error message:
No message body reader has been found for request class Employee, ContentType application/octet-stream.
I think the request is not going as XML. But while creating the datacontrol i have specified the xsd document for the iput xml request. Does ADF automatically creates the XML from the input parametres? If it does not, then what could be done to achieve that? The default actionListener of the submit button is #{bindings.loadData.execute}. Do i have to override it to send the XML request? Or have I missed anything in trying to achieve what i intend?
I had refered this link for reference :
http://docs.oracle.com/cd/E18941_01/tutorials/jdtut_11r2_53/jdtut_11r2_53.html
Rampal
Edited by: user12011868 on Jan 22, 2012 10:03 PM

Hi Frank,
I had specified the HTTP method as POST as well as PUT. But the same error is appearing in the both the cases.
URL Test: Received Error: Method Not Allowed
And when I am clicking on the 'Test URL Connection' , I can't see any option of selecting the HTTP method. This option only appears in the step 2 of creating the URL service data control where we mention the URL endpoint and the source.
What could be the reason for the error.
Rampal

Restlet Error "The server has not found anything matching the request URI"

I want to serve some static html pages along with my restlet services from the same app ( running in Tomcat )
Here is my web.xml
<?xml version="1.0" encoding="UTF-8"?>
<web-app id="WebApp_ID" version="2.4"
            xmlns="http://java.sun.com/xml/ns/j2ee"
            xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
            xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee
                 http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
   <display-name>first steps servlet</display-name>
   
   <context-param>
      <param-name>org.restlet.application</param-name>
      <param-value>
         firstSteps.FirstStepsApplication
      </param-value>
   </context-param>
   
   <servlet>
      <servlet-name>RestletServlet</servlet-name>
      <servlet-class>
         org.restlet.ext.servlet.ServerServlet
      </servlet-class>
   </servlet>
   
   <servlet-mapping>
      <servlet-name>RestletServlet</servlet-name>
      <url-pattern>/*</url-pattern>
   </servlet-mapping>
</web-app>
Here is my Application router class
public class FirstStepsApplication extends Application
     @Override
     public synchronized Restlet createInboundRoot()
          Router router = new Router(getContext());
          // Defines only one route
          router.attach("/hello", HelloWorldResource.class);
          router.attach("/login", LoginResource.class);
          router.attach("/", BasicResource.class);
          return router;
}I've gone back to the basic first steps example.
It works fine if the url pattern is <url-pattern>/*</url-pattern>
localhost/rest/login returns a string from my LoginResource, same too for /hello
However a static html page I have /Mypage.html does not get returned when I enter the URL /MyPage.html
However, if I then modify the url pattern to be
<url-pattern>/login</url-pattern>
and then enter the url /MyPage.html I will get the html page.
But ...... I get the error "The server has not found anything matching the request URI" when I enter the url /login which worked ok the first case.
What must I do in order for both Restlet & Static HTML resources to work together?
Thanks ... J

yes, basicResource is my own class. It's a catch all for restlet requests that don't match any of the other ones. It just returns String = "My catch all resource"
Because you highlighted it I decided to try and remove it from my Restlet Router. Presto, it now works, the login & hello requests are serviced by my Restlet resources and the MyPage.html requests are served the mypage.html file. This now brings another question. If from my servlet mapping in web.xml all urls are to be handled by restlet "/*", how then does a mypage.html request not get serviced by my restlet? Seems to be just passed through the restlet framework when there is no router to match it? what do you think?

Web pages posted to .Mac using iWeb do not render correctly on IE

Okay, let's face it - most people out there use Internet Explorer (IE) to view web pages. I just published my web page using iWeb onto my iMac account. The web site renders correctly on my Mac, but does not render correctly on my PC using IE at work. Several other people using IE saw similar problems. For example, IE does not show the links until you run your mouse over them. Also, the text renders as an image (you cannot select text individualy). What do I do to ensure that all the world views the site correctly? Thanks.

Welcome to the discussions, stoma.
You'll have to essentially dumb your site down to IE level. Get rid of the cool effects, the transparencies, the rotated images, basically everything that makes iWeb so impressive to use. Make a nice plain site with no frills and you're 90% of the way to near 100% IE compatibility.
Take all of your images and edit them outside of iWeb (like with other web applications) and that's another significant chunk. There will be a few bits left over, but some of those will be things you can't do anything about (like some of the page elements being created as .png's). You'll be as close to IE compatible as you can get with iWeb.
Post your URL to let other users post as to what your SPECIFIC site would need.

SCCM 2012 R2 CU2 Clients Will Not Download Anything Using BITS, error 0x801901F4

I built a new SCCM 2012 R2 CU2 suite on Server 2012 R2. Clients will not download anything that require BITS transfers. The root of the problem seems to be in the DataTransferService.log. These lines keep appearing over and over:
CDTSJob::HandleErrors DTS Job '(a GUID)' BITS Job '(a GUID)' under user '(SID)' OldErrorCount: 11 NewErrorCount: 12 ErrorCode 0x801901F4 (of course, error counts increment)
CDTSJob:Handlerrors DTS Job = '(GUID matching one above)' URL='http://dpname and package path' ProtType=1
Any input appreciated.
Ben JohnsonWY

Well, I found a problem. LOCAL SERVICE was running the Distribution Points Pool in IIS and Local Service didn't have rights to c:\windows\Microsoft.Net\Framework64\V4.0.30319 on the DP server. Once it did that it cleared up some IIS problems but not this
problem.
0x80070003 seems to mean "path not found". In DataTransferService.log the path it's trying to get to is
http://fullservername:80/sms_dp_smspkg$/abc00012. When I enter that path into a browser URL bar, it displays this info:
date time 50449456
http://fullservername:80/sms_dp_smspkg$/abc0012.2/exe file of patch it's trying to pull.
The clients seem unable to find the path to the patches.
Ben JohnsonWY

Error in pdk url services when using a proxy server

Hi All,
i created a pdk url services portlet, which connects to a google site. i got a sucessful provider test page..when i tried to add it as a portlet it gives me the following error ,
Portlet Information could not be obtained. (WWC-44334)
An unexpected error occurred: ORA-29532: Java call terminated by uncaught Java exception: HTTPClient.AuthSchemeNotImplException: NTLM (WWC-43000)
An unexpected error occurred: HTTPClient.AuthSchemeNotImplException: NTLM
at HTTPClient.DefaultAuthHandler.getAuthorization(DefaultAuthHandler.java:136)
at HTTPClient.AuthorizationInfo.queryAuthHandler(AuthorizationInfo.java:330)
at HTTPClient.AuthorizationModule.setAuthHeaders(AuthorizationModule.java:454)
at HTTPClient.AuthorizationModule.responsePhase2Handler(AuthorizationModule.java:287)
at HTTPClient.HTTPResponse.handleResponse(HTTPResponse.java:635)
at HTTPClient.HTTPResponse.getInputStream(HTTPResponse.java:515)
at oracle.webdb.provider.web.HttpProviderDispatcher.dispatch(HttpProviderDispatcher.java:809)
what could be the reason for this error. can anyone help me plzz..its urgent
Regds
Kiran
at oracle.webdb.provider.web.HttpProviderDispatcher.getPortlet(HttpProviderDispatcher.java:463)
(WWC-43000)

1. The version of my pdk is 3.0.9.0.5
2. provider.xml
<?xml version = '1.0' encoding = 'UTF-8'?>
<?providerDefinition version="2.0"?>
<provider class="oracle.portal.provider.v1.http.URLProvider">
<session>true</session>
<proxyInfo class="oracle.portal.provider.v1.http.ProxyInformation">
<httpProxyHost>proxy</httpProxyHost>
<httpProxyPort>80</httpProxyPort>
<proxyUser>username</proxyUser>
<proxyPassword>password</proxyPassword>
</proxyInfo>
<portlet class="oracle.portal.provider.v1.http.URLPortlet">
<id>1</id>
<name>Google.com Portlet</name>
<title>Google.com Portlet</title>
<description>This portlet is to test PDK-URL Services using Google</description>
<timeout>100</timeout>
<timeoutMessage>Google Portlet timed out</timeoutMessage>
<showEdit>false</showEdit>
<showEditDefault>false</showEditDefault>
<showPreview>false</showPreview>
<showDetails>false</showDetails>
<hasHelp>false</hasHelp>
<hasAbout>false</hasAbout>
<acceptContentType>text/html</acceptContentType>
<registrationPortlet>false</registrationPortlet>
<accessControl>public</accessControl>
<renderer class="oracle.portal.provider.v1.RenderManager">
<showPage class="oracle.portal.provider.v1.http.URLRenderer">
<contentType>text/html</contentType>
<pageExpires>60</pageExpires>
<pageUrl>http://www.google.com</pageUrl>
<filter class="oracle.portal.provider.v1.http.HtmlFilter">
<headerTrimTag><center</headerTrimTag>
<footerTrimTag>/center></footerTrimTag>
<convertTarget>true</convertTarget>
</filter>
</showPage>
</renderer>
<securityManager class="oracle.portal.provider.v1.http.URLSecurityManager">
<authorizType>public</authorizType>
</securityManager>
</portlet>
</provider>
Regds
Kiran

Help dealing with Firewall, and URL Services

All,
We have recently installed the PDK URL Services for Portal to help
fulfill a requirement to enable Single Sign-On to access web sites
outside our client's network. We have hit a snag though, in that the
client has in place a firewall that challenges the browser at each
request to access an outside site. URL Services does not seem equipped
to handle these extra challenges in addition to the Single Sign-On
Username and Password requirements.
Has anyone dealt effectively with this problem? Is there an effective
remedy or technique using SSO /URL Services providers that will allow
this to take place? Can we more effectively use the built in proxy
services to help us with this?
We are currently using the latest URL Services download under Portal
3.0.9.8.2 on Solaris.
Thanks in advance for any help on this, our need is urgent, and time is
short.
Stuart Dautrich

Stuart,
I guess you're currently in touch with the appropriate people for this issue now.
It would be great if you share your experience and tips with other users too.
Thanks,
Mohana

Help dealing with URL Services and Firewall

All,
We have recently installed the PDK URL Services for Portal to help
fulfill a requirement to enable Single Sign-On to access web sites
outside our client's network. We have hit a snag though, in that the
client has in place a firewall that challenges the browser at each
request to access an outside site. URL Services does not seem equipped
to handle these extra challenges in addition to the Single Sign-On
Username and Password requirements.
Has anyone dealt effectively with this problem? Is there an effective
remedy or technique using SSO /URL Services providers that will allow
this to take place? Can we more effectively use the built in proxy
services to help us with this?
We are currently using the latest URL Services download under Portal
3.0.9.8.2 on Solaris.
Thanks in advance for any help on this, our need is urgent, and time is
short.
Stuart Dautrich

Stuart,
I guess you're currently in touch with the appropriate people for this issue now.
It would be great if you share your experience and tips with other users too.
Thanks,
Mohana

Received confirmation from ITUNES for $699.99, not me. Did not order anything.

recieved conformation from I Tune for $699.99, not mind, did not buy anything, what to do?

If the charge appears to be real, contact the iTunes Store.
FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
 Cheers, Tom

The Secure Store Service application Secure Store Service Proxy is not accessible

I am working on setting up a new SharePoint 2013 Farm for our external web site which is currently running on 2010 SharePoint. Because this is an External Website for our organization we have an internally available Publishing Site and there is an Web App
Extension to provide Anon Access to users using the www address. Currently I am doing everything on a single server for testing with HOSTS entries to loop back so I can test with real host headers and not impact the 2010 prod environment. We will be setting
up 2 more WFEs with a NLB before moving this into prod but it isn't there yet. We brought the Site Collection Databases over but are still running in 2010 mode for now.
I migrated a copy of the Secure Store Database over from 2010 and had it put on the 2013 Farm's Database Server. Set up Secure Store and the Secure Store Proxy. I went into the Secure Store Proxy in CA and refreshed the Key with the proper Pass Phrase. After
doing that I could see the Target Application IDs listed. Everything was looking good so I went off to test. If I am on the publishing site I can go to a page that has the solution on it and it operates as expected. It does a query to a non SharePoint database
and returns information filtered based on the search parameters. The only odd thing I see is if I click on the "Site Actions" I get a message "An error has occurred with the data fetch. Please refresh page and retry." Need to look into
that more but it only happens on pages that have these solutions. Maybe a clue. If I go to the Anonymous Access page (www......) and try and use the solution, it immediately (way too quick to appear like it is doing anything) comes back with "The security
token request cannot be completed."
If I dig through the usage logs I am finding the following.
The Secure Store Service application Secure Store Service Proxy is not accessible. The full exception text is: The security token request cannot be completed.
Unexpected exception from endpoint address : https://[Servername]:32844/4e87fd3aabb640fb8cc3ed52188cf5c0/SecureStoreService.svc/https
Logging unknown/unexpected client side exception: InvalidOperationException. This will cause this application server to be removed from the load balancer queue. Exception: System.InvalidOperationException: The security token request cannot be completed.
at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForServiceContext(Uri contextUri) at Microsoft.SharePoint.SPChannelFactoryOperations.InternalCreateChannelActingAsLoggedOnUser[TChannel](ChannelFactory`1 factory, EndpointAddress
address, Uri via) at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.GetChannel(Uri address) at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.Execute[T](String operationName,
Boolean validateCanary, ExecuteDelegate`1 operation).
Initially I was fighting a firewall issue because it wasn't working (different errors) on both sides. Had Network Engineers open firewall ports needed and now it works on the publishing side. Still the same error on the Anon side. I suspect I have missed
something when it comes to configuring the Secure Store to allow access to anonymous connections.
Let me know if you need any more information but that should paint a pretty good picture as to how things are set up.
Thanks for any help on this one. Searches haven't found much that has helped so far.

Hi Sennister,
I recommend to verify the things below:
Did this issue occur with all the pages in the anonymous side?
Check if the Claims to Windows Token Service is started.
Change the <identity impersonate="true" /> in the web.config to see if the issue still occurs.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Webi report using openDocument URL,the window does not close..

Hello,
While viewing a Web intelligence report using openDocument URL, the window does not close after clicking on Document -> Close option, and the report remains open.
And if I close the browser, the session of the user in InfoVierw remains opened
Thanks
Environment
Firefox/3.6.15
Internet Explorer 8
BusinessObjects Enterprise XI 3.1
SAP Integratio KIT XI 3.1
SAP BW 7.02

Please check SAP note 1512960 and SAP note 1384496.
http://service.sap.com/notes
This behaviour is by design.
Regards,
Stratos

Upgrade from 12.1.1 to 12.1.3 now Find Service Request does not work.

I recently upgraded our Test machine from 12.1.1 to 12.1.3 (RHEL 4.8). After performing the install and applying appropriate patches and most recent CPU when I attempt to 'Find Service Request' I can search by number, choose the correct SR I want in the form and click open. However when the SR form opens it just defaults to a new SR instead of the one returned in the search results. I have generated all form files again and that did not change anything. I have searched and not come across anything that appears to be applicable. Anyone have any ideas?
Thanks

I am logged in as myself and using the 'Service' responsibility.
Service -> Service Requests -> Find Service Requests
versions:
CSXSRISR 120.208.12010000.84
I do the search and I find it, however when it goes to open the result the sr form is as it is new.
Oddly enough if I go under sysadmin and use the same responsibility, same path and search the sr will open the returned result.
As sysadmin however it has a different layout in the 'folder' at the top of the screen. Could this be causing the difference or should that matter?
Thanks

URGENT! url services portets do not render anything

Similar Messages

Maybe you are looking for