URL does not resolve correctly

Hi,
When calling portal30.wwsec_app_priv.logout?p_done_url=url/page/<pagename> under R1 the re-direct works fine.
Have modified code for R2 to be portal.wwsec_app_priv.logout?p_done_url=url/page/<pagegroupname>/<pagename> - now I get "page could not be found error" but when I explictly type the URL into the address it works.
Has there been a change to how the p_done_url parameter must be provided in R2?
Any help would be much appreciated...
Thanks in advance.

Try putting the fully qualified http://hostname:port/pls....

Similar Messages

Url bar not displaying correctly on forwarded domain

I found a problem.... on domain forwarded site - the right side of the url does not update correctly...
the REAL site is:
mysite.com - but we use a 2nd domain - mysite2.com that uses forwarding (w masking) to the 1st - mysite.com (so they are both the same real pages)
(the owner wants it this way)
NO PROBLEM when I use = mysite.com
mysite.com/dir1/dir2/index.php = ALL GOOD - urls display correctly...
but this problem appears when I use mysite2.com (forwarding)
mysite2.com/dir1/dir2/index.php - does NOT UPDATE CORRECTLY
pages go the the right place - but url stays here (last place typed) - mysite2.com/dir1/dir2/index.php
Q: any way to fix the 2nd forwarded domain with a master bit of code of something?
a href links are simple like - update.php (not absolute refs)

Hi Murray - thanks for your help,
1 - the master site is:
http://deboisproductions.com
it has all the links showing properly as you go to varied pages
2 - this is a domain forward with masking (from godaddy goes to #1 deboisproductions.com)
http://deboisentertainment.com/
it has all the links NOT showing properly as you go to varied pages - it stays on deboisentertainment.com

PrintWriter does not send correct text over HTTP

Hello All,
I need information to resolve a problem I am having with PrintWriter and sending text using HTTP.
I am developing a client/server system. A client will be used to connect to a Tini (a Dallas Semiconductor designed embedded system). Currently, to understand HTTP operation, I wrote a server that resides on the tini that listens for a connection attempt and when one is made prints the HTTP message in Dallas' JavaKit application window. The resultant Tini display includes some hardcoded tini text (italics only in (b) and (c) below) along with that received from the client app (italic bold in (b) and (c) below).
I have also written some test client side code (see (a) below) in Sun's Java Studio Creator that sends a couple of lines of text so that I could see what my client app would actually send. I tried a few different ways of creating a PrintWriter object as shown in the code at (a) below just to see if it was a character set problem.
The problem is that I get two different results under the following conditions:
[Condition 1]: Entering "HTTP://tini" in the browser and pressing Enter. See result (b) below. This is correct and shows what the browser sends to the tini. The tini outputs the text immediately after pressing Enter.
[Condition 2]: Running my client code in the browser. See result (c) below. This is incorrect and sends just a bunch of "y"s with umlauts as the message. The tini immediately outputs text up to the "cnt=0" line and then can take up to a couple of minutes to complete the message.
1. Can anyone tell me why the client sends those "�" instead of the strings I encoded for all character sets?
2. Why does the client code takes so long to complete after the initial transmission?
3. Can anyone provide me with links to information that explains this behavior? I searched Sun and the forum but found nothing.
(a) Here is the current test client side code that sends a couple of strings to the tini:
    public String button3_action() {
        // TODO This should send the tini a request for its IP address
        String protocol = "HTTP";
        String host = "tini";
        try{
             URL tiniURL = new URL("http://tini");
             URLConnection tiniConnection = tiniURL.openConnection();
             tiniConnection.setDoOutput(true);
     //     Comment out one then the other to see if there is a difference in result (there is not!)
     //        PrintWriter tiniout = new PrintWriter(new OutputStreamWriter(tiniConnection.getOutputStream(), "UTF-16"));
     //        PrintWriter tiniout = new PrintWriter(new OutputStreamWriter(tiniConnection.getOutputStream(), "UTF-8"));
     //        PrintWriter tiniout = new PrintWriter(new OutputStreamWriter(tiniConnection.getOutputStream(), "ISO-8859-1"));
     //        PrintWriter tiniout = new PrintWriter(tiniConnection.getOutputStream());
             PrintWriter tiniout = new PrintWriter(new OutputStreamWriter(tiniConnection.getOutputStream()));
             tiniout.println("GET / HTTP / 1.1\r\n");
             tiniout.flush();
             tiniout.println("IPaddress?");
             tiniout.flush();
             tiniout.close();
        catch(MalformedURLException e){
            e.printStackTrace();
        catch(IOException e){
            e.printStackTrace();
        return null;
(b) Result displayed in JavaKit from Condition 1:
just starting
Waiting for a connection attempt
Start thread
Thread's run() method entered!
Try to create a new StringBuffer
StringBuffer created
Read the buffer in this loop cnt =0
Read the buffer in this loop cnt =1
Read the buffer in this loop cnt =394
Read the buffer in this loop cnt =395
Out of loop.
Now print HTTP message.
GET / HTTP/1.1
Host: tini
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.7.2) Gecko/20040804 Netscape/7.2 (ax)
Accept: text/xml,application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8 ,image/png,*/*;q=0.5
Accept-Language: en-us,en;q=0.5
Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7
Keep-Alive: 300
Connection: keep-alive
"v"is at position390
"e"is at position391
"is at position392
""is at position393 "
"is at position394
java.lang.StringIndexOutOfBoundsException: String index out of range: 395
No other stack trace info available.
(c) Result displayed in JavaKit from Condition 2:
just starting
Waiting for a connection attempt
Start thread
Thread's run() method entered!
Try to create a new StringBuffer
StringBuffer created
Read the buffer in this loop cnt =0
Read the buffer in this loop cnt =1
Out of loop.
Now print HTTP message.
��
"�"is at position390
"�"is at position391
"�"is at position392
"�"is at position393
"�"is at position394
java.lang.StringIndexOutOfBoundsException: String index out of range: 395
No other stack trace info available

This is to anyone that is having trouble sending data via a stream using a browser client. I found the answer after many different searches on the Sun site in a bug report: Bug ID: 4192018.
The problem arises from the way the API actually uses outputstreams. It appears that you must add an InputStreamReader to actually flush the OutputStreamWriter buffer. After reading this bug report I added
(tiniConnection.getOutputStream(), "ISO-8859-1"));
        OutputStreamWriter tiniout = new OutputStreamWriter(tiniConnection.getOutputStream(), "ISO-8859-1");
        InputStreamReader tiniIn = new InputStreamReader(tiniConnection.getInputStream(), "ISO-8859-1");
        tiniout.write("GET/HTTP/1.1\r\n");
        tiniout.flush();
        //This is necessary to actually send data.
        tiniIn.read();
        tiniout.write("IPaddress?");
        tiniout.flush();
        //This is necessary to actually send data.
        tiniIn.read();
        tiniout.close();
        catch (MalformedURLException e){
            e.printStackTrace();
        catch (IOException e){
            e.printStackTrace();
        }NOTE: The preliminary program still does not perform correctly but it does send data that is displayed in tini's JavaKit window. At least I can continue to verify how the browser sends data.
I hope this helps someone.

DNS Server does not resolve new generic Top Level Domain names- CNR configuration issue?

Hi all,
I am not sure if this is the correct community to post this question, but I will give it a try. I noticed that the users of my network cannot resolve web sites using new top level domain names, like ".education", ".international", etc. I have an internal DNS server made by Infoblox and a Cisco CNR v6.3.3.1 as an external DNS server. Infoblox uses CNR as its forwarder and CNR uses the root DNS servers for queries.
I would think that CNR was the problem because it is an obsolete product but after speaking with a fellow engineer at another organization where they still use an older version of CNR than mine, they have no problems at all. So now I am thinking it is a setting either on Infoblox, or on CNR I need to change. I can see Infoblox is forwarding the requests to CNR but that's about it. I am not sure if CNR is discarding the request. When I do an nslookup from a PC in my network it does not matter if I set my DNS server to be the Infoblox or the CNR. Neither resolves the URL.
Then again, no matter what I lookup using the CNR as my DNS, I only get a response with the root DNS names and IPs!
Any help is appreciated!

Hi Constantinos,
Have you taken a look at the infoblox community site? We've just reposted your question there and alerted some internal SMEs that should provide a solution soon.
https://community.infoblox.com/forum/ddi/dns-server-does-not-resolve-new-generic-top-level-domain-names-cnr-configuration-issue
Best,
Eric

REPORT DOES NOT RUN CORRECTLY , URGENT PLEASE HELP

Hi,
I am trying to run a report from visul basic screen, but it does not run correctly. Here is how I am running the report. There is a screen developed in VB This screen prompts the user for user id and password. Once it gets that, it connects to the oracle database and pulls out a column from a table. And passes that value as a parameter to the report. Now I am calling the the report for each individual value . There are 21 value being pulled out of the database and it invokes the report 21 times. So there are 21 report engines gets started. Is there a better way to do that ? Secondly when I pass the parameter , some parameters does not pass correctly I guess , because its not generating any out put . Like out of 21 may be 10 or 11 reports gets generated correctly but rest of the reports are blank. I debug the screen i saw that the parameter value is correct, everything seems good. But still the reports are comming blank. Any Idea why it is so ? The command line that i am using in VB screen is
Shell "C:\progra~1\ora95_2\bin\rwrun60.exe P:\Business_Analysis_&_Reporting_Tool\Test_REPORT_Templates\STORE_TYPES\Baby_Distribution_Report.Rdf USERID=" & UID & "/" & PWD & "@cposp201 DESFORMAT=PDF DESTYPE=FILE DESNAME=" & txtPath.Text & Replace(strName, " ", "_") & ".PDF BRND='" & adoRecBrand!Brand & "' PRINTJOB=NO PARAMFORM=NO"
In the above command " adoRecBrand!Brand " is the parameter thats being passed. This is actually a recordset and brand is the column in it. When I debug the screen , I see the value also there. But the report comes out blank. Please help. This is urgent.
Thanks
Feroz

The way you call reports is not scalable. If you have 100 records come back from database, you would end up launch 100 engines at the same times, which probably will blow up your machine. You should use oracle reports server to do that. You can either use rwcli60 to submit the job to reports server, or invoke rwcgi60 from URL.
I am afraid some of reports engine failed to start and you get nothing back in your case.
After switch to use reports server achitecture, if you still see some report is blank in your application, then you can run that report with that special set of parameters manually and see if any problem with the report itself.
Hope this helps.
Thanks,
-Shaun

"The hostname does not resolve to any configured address..."

I think this is a stupid question But I just can't remember what I'm missing. It's been a while since I set one of these up.
I have just installed Lion and Server on a Mac Mini 2.66GHz C2D
I'm not trying to change the Open Directory settins from Standalone directory to an Open Directory Master.
When I do it saks me to create a directory adminstrator account. No problem. But when I hit continue on that screen I get a message saying:
"The hostname does not resolve to any configured address. Please ensure your hostname and network configuration is correct."
Now, I think this is because I haven't set up any DNS zones yet. But I'm not sure about that...
So can anyone(s) help me with these two things:
1. Is the Open Directory master I'm trying to set up dependent on setting up DNS first?
2. If so, can someone tell me what I'm supposed to do in the DNS, because for the life of me I can't remember anything about it.
I'll be very grateful for any help...
Thanks!
David.

Hi again. Thanks for the help. So that clears up that mystery. However...
Ok, so as already noted, I've completely forgotten how I set this up last time, but I remember that I still have an archive of my old Snow Leopard server before I upgraded it to Lion.
So I've fired that up in Server Admin to see how I set up the DNS in that, and see if that can remind me how to set up the same on my new Lion server.
I believe I've set it all up correctly, but alas, I'm still getting the same error message when I try to create the open directory master. So I must be doing something wrong still. I just wish I knew what that was.
I've attached screen shots of my settings. If you or anyone else can tell me what I'm doing wrong, then again, I'd be grateful!
The routing is done by my Airport Extreme, with the .200 IP address being assigned by DHCP client ID. The IP address of this machine is in fact 10.0.1.200. These settings are exactly the same (with one exception) as my (working) Snow Leopard server and just to be clear I'm not trying to run both servers at once!
The one exception is this: The first line in the screen shot says "1.0.10.in-..." (from the non-working Lion server), whereas on my Snow Leopard server, the same line says "200.1.0.10.in-..." Everything else is the same. I can't seem to see any way of "correcting" that. Is that the cause of the problem? And if so, how do I fix it? If not, what *is* the problem?
Thanks!
David.

Adobe Acrobat Pro X 10.1.7 (Mac) does not print correctly.

I have a Mac Pro (Model 1.1) with Adobe Acrobat X 10.1.7. When an item is scanned, it appears correctly on the screen, but it does not print correctly. I am sending along screenshots of what a scanned item looks like on the screen and then what prints.
Message was edited by: DFSons Added photos

Thanks Michael, have tried that, no luck. I will wait a couple of days to see if any other solutions come up (or if anyone else is suddenly having the same issue) before reinstalling Acrobat.
[OK just tried sending a PDF attachment directly from another program (MYOB) through to Mac Mail and had the same problem so it is not an Acrobat issue afterall, it is a Mac Mail or Mac OS X issue. Will post this on the Apple site.]
I have resolved the MYOB issue, it was working just painfully slow. So I still have the original Acrobat Pro PDF to Mac Mail issue if anyone knows of any solutions please?
Message was edited by: jmgd

Fsbtodb macro in ufs_fs.h does not return correct disk address

I'm using fsbtodb to translate the file inode block address to file system block address.
What I've observed is fsbtodb returns corretct disk address for all the files if file system size < 1 TB.
But, if ufs file system size is greater than 1 TB then for some files, the macro fsbtodb does not return correct value, it returns -ve value
Is this a known issue and is this been resolved in new versions
Thanks in advance,
dhd

returns corretct disk address for all the files if file system size < 1 TB.and
if ufs file system size is greater than 1 TB then for some files, the macro fsbtodb does not return correct value, it returns -ve valueI seem to (very) vaguely recall that you shouldn't be surprised at this example of a functional filesize limitation.
Solaris 9 was first shipped in May 2002 and though it was the first release of that OS to have extended file attributes I do not think the developers had intended the OS to use raw filesystems larger than 1TB natively.
That operating environment is just too old to do exactly as you hope.
Perhaps others can describe this at greater length.

Sharepoint does not resolve users from federated AD directory

Our sharepoint farm resides in a domain called abc.com and we just federated with another domain def.com.
The issue is that 9 out of 10 times sharepoint does not resolve users from def.com when adding them using the normal GUI and people picker. Users from def.com domain will have to click on the url and request access before they can be added to the sharepoint.
Please can someone let me know what needs to be done so that sharepoint can resolve users from def.com domain using the people picker.
Kind Regards
Louis
thanks

Here is the way to do this via PowerShell:
http://thesharepointfarm.com/2014/01/powershell-for-people-picker-properties/
Do you have a two-way trust enabled? In that, case, it isn't required to use peoplepicker-searchadforests. If you do have a two way trust in place and SharePoint has port access to the remote domain controllers, does the remote domain NetBIOS and FQDN match
(e.g. EXAMPLE and EXAMPLE.com)?
As far as the credentials, you put in the remote domain's credentials, e.g. "forest:abc.com;forest:def.com,username,password" where the username is the sAMAccountName of a user in the remote domain.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

One song does not synch correctly

I purchased a song from iTunes on my Mac. I added it to two different playlists and synched those playlists to my iPhone 4. When I play the song on my iPhone, it does not start at the beginning of the song (the first 10 or 15 seconds seem to be missing). The song plays correctly on my Mac.
I tried deleting the song from my playlists, syncing, copying the song again to the playlists, and re-synching. The song still does not play correctly on my phone.
Does anyone have ideas for how to resolve this?

Hello Michael,
Thank you for providing the details of the issue you are experiencing with the song purchased from the iTunes Store. I recommend following the following article, specfically the section titled "Authorize using the correct account name," for the issue you described
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Thank you for using Apple Support Communities.
Best,
Sheila M.

Name in certificate `URL' does not match host name `URL'

Hello,
We are getting the error
Name in certificate `URL' does not match host name `URL'?
Can someone can provide solution to resolve the above error? Also can you please inform whether Coldfusion 8 supports checking the Subject Alternative Names in the SSL certificate? If so, kindly tell us how to do it.
Environment that we use is coldfusion 8 with sql server 2005 (DB). If you have any query please let me know.
Thanks,
Satheesh.

Hi Siva,
we have faced the same problem on our application. To overcome this we used the below workarround...
Make the host entry for webservice provider [serviceprovider.test.com] pointing to its IP [172.99.71.12].
In cfm file
There's no need to add the proxy and the port in the cfm file.
             <cfhttp method="Post" url="#WEBSERVICE_SERVICE_PROVIDER#" resolveurl="Yes">
                <cfhttpparam type="Formfield" name="xmlValue" value="#tostring(xml)#">
            </cfhttp>
The below URL will help you on debugging CFHTTP Request
http://kb2.adobe.com/cps/998/9987e902.html

Animated Gif Image does not render correctly on screen

I have added animated gif image to the scene it does not render correctely.it shakes on the screen. plz give me any suggestion
i use following code
Image logo= new Image(getClass().getResourceAsStream("images/image.gif"));
logoLabel.setGraphic(new ImageView(logo));

Hello user,
I think gif are rendered smoothly.
Are you sure you are not making many object of same images everytime?
Thanks.
Narayan

Content file download failed. Reason: HTTP status 404: The requested URL does not exist on the server.

Hi,
I am getting this error in most of our WSUS servers.
Content file download failed.
Reason: HTTP status 404: The requested URL does not exist on the server.
Source File: /Content/FB/134501186F4C81089054E4EC3376E74EEC895EFB.exe
Destination File: d:\wsus\WsusContent\FB\134501186F4C81089054E4EC3376E74EEC895EFB.exe
After few minutes, getting below error as well. But i could see the synchronization has completed successfully.
Log Name: Application
Source: Windows Server Update Services
Date: 12/19/2014 4:45:55 PM
Event ID: 10032
Task Category: 7
Level: Error
Keywords: Classic
User: N/A
Computer: ******
Description:
The server is failing to download some updates.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows Server Update Services" />
<EventID Qualifiers="0">10032</EventID>
<Level>2</Level>
<Task>7</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-12-19T08:45:55.000000000Z" />
<EventRecordID>496887</EventRecordID>
<Channel>Application</Channel>
<Computer>*****</Computer>
<Data>The server is failing to download some updates.</Data>
This error is happening everyday. Please advise for a fix.

Reason: HTTP status 404: The requested URL does not exist on the server.
Source File: /Content/FB/134501186F4C81089054E4EC3376E74EEC895EFB.exe
Destination File: d:\wsus\WsusContent\FB\134501186F4C81089054E4EC3376E74EEC895EFB.exe
Source: Windows Server Update Services
Description:
The server is failing to download some updates.
This error is happening everyday. Please advise for a fix.
If this is happening on an UPSTREAM server it is because you have approved updates that are no longer available from Microsoft. Almost always this involves approvals of *EXPIRED* updates (which have been pulled from the catalog and cannot be downloaded).
If this is happening on a DOWNSTREAM server it's because something/someone deleted the files from the upstream server. It can also happen if the entire upstream ~\WSUSContent folder has gone amuk.
For an upstream server, find the expired updates, remove the approvals, cancel the downloads, and then decline the updates.
For a downstream server, figure out what the affected updates are and fix the upstream server.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Page does NOT load correctly in FIREFOX

My HOME page does not RELOAD correctly in FIREFOX when when
the link is clicked on from another page in my little "2 page"
site.
BUT if I click on the BACK button it loads CORRECTLY
It works correctly in IE
Here is the Home page:
http://www.quicksubmitbrokerswholesale.com/
Here is page 2 where clicking on the link in FIREFOX loads
incorrectly:
http://www.quicksubmitbrokerswholesale.com/submitforpricing.html
What do I need to TWEAK to make it work OK in FIREFOX?
Thanks in advance

Here is the crux of all your problems:
<!-- Fireworks 4.0 Dreamweaver 4.0 target.
You built the site in Fireworks, and a very old version at
that, and then
imported the site into DW. Graphics apps like Fireworks and
Photoshop
produce bloated, convoluted code and fragile structures. If
you want a
worthwhile site you will have to start over. Create only your
graphics in FW
and build the entire site in DW. Be cautioned though such an
old version of
DW won't produce a site consistent with today's standards.
You really should
upgrade if you want to deliver value to your client.
Walt
"electro-dud" <[email protected]> wrote in
message
news:gb2k07$9v4$[email protected]..
> My HOME page does not RELOAD correctly in FIREFOX when
when the link is
> clicked
> on from another page in my little "2 page" site.
> BUT if I click on the BACK button it loads CORRECTLY
>
> It works correctly in IE
>
> Here is the Home page:
>
http://www.quicksubmitbrokerswholesale.com/
>
> Here is page 2 where clicking on the link in FIREFOX
loads incorrectly:
>
http://www.quicksubmitbrokerswholesale.com/submitforpricing.html
>
> What do I need to TWEAK to make it work OK in FIREFOX?
>
> Thanks in advance
>
>

Error while executing webdynpro application : he URL does not contain full

Dear All,
I had installed SAP in my system.But when I am testing webdynpro application I am getting the belwo error. Please let me knwo what setting I need to do to avoid this error.
Error when processing your request
What has happened?
The URL http://hari:8000/sap/bc/webdynpro/sap/z_test_pg was not called due to an error.
Note
The following error text was processed in the system DEV : The URL does not contain full domain specification (hari statt hari.<domain>.<ext>).
The error occurred on the application server HARI_DEV_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CHECK of program CX_FQDN=======================CP
Method: LATE_CONSTRUCTOR of program CL_WDR_UCF====================CP
Method: HANDLE_REQUEST of program CL_WDR_UCF====================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system DEV in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server HARI_DEV_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server HARI_DEV_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 800 -u: SAPUSER -l: E -s: DEV -i: HARI_DEV_00 -w: 0 -d: 20080109 -t: 073032 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team

Hello,
Little extract from the SAP online help :
In Web Dynpro ABAP it is imperative that a client browser with a fully qualified domain name (FQDN) has access to the AS-ABAP. For this reason the full URL must be assigned to a Web Dynpro ABAP application when it is called. The URL must not be shortened (for instance, no domain specification).
More info on how you should do this can be found here :
[Click|http://help.sap.com/saphelp_nw70/helpdata/en/67/be9442572e1231e10000000a1550b0/content.htm]
This will solve your problem.
Success.
Wim

URL does not resolve correctly

Similar Messages

Maybe you are looking for