Url for JDBC

hi guys,
well, i have a bit of problem here
i have a semesteral project which require us to setup a database
however, i'm not sure if the school will allow us to use the school server
so i would like to know if the url that is passed to getConnection() method can be from a disk drive, e.g:
String url = "jdbc:ids:d:\database.mdb
thanks!!

Not sure on the url method. However if you have access on the machine to the ODBC setup you would then create an odbc for jet connection to the mdb file. Name it whatever, say "projdb".
Now in your code you would access it like so:
Class.forName( "sun.jdbc.odbc.JdbcOdbcDriver" );
Connection con = DriverManager.getConnection("jdbc:odbc:projdb","","" );

Similar Messages

Specify a Connection URL for JDBC thin

I am trying to generate a Report using JDBC but the connection to the database fails when I try to run this Report. What is the Parameter I have to put for the JDBC Connection. i.e userid=scott/tiger@db1

This topic has been answered in a duplicate thread.
The Oracle Reports Team.

JDBC URL for Two Oracle Nodes

Hi All,
I have two DB nodes which are running independently (Mean no RAC), I want to configure JDBC URL for these nodes that if one node goes down my application automatically connected to second one.
Both nodes have different HOST and SID.
Regards,
imran

Hi jwenting,
I tried following URL in PL/SQL developer and my fail over is working fine with separate nodes, Only thing i did was i keep SID of both nodes with same name.
ERS=(DESCRIPTION=(FAILOVER=on)(LOAD_BALANCE=off)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=172.21.5.130)(PORT=1521))(ADDRESS=(PROTOCOL=TCP)(HOST=172.21.5.133)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
But strange when i connected this through JDBC URL like following it gives me error of invalid URL
jdbc:oracle:thin:@(DESCRIPTION=(FAILOVER=on)(LOAD_BALANCE=off)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=172.21.5.130)(PORT=1521))(ADDRESS=(PROTOCOL=TCP)(HOST=172.21.5.133)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
Regards,
imran

Jdbc url for yahoo finance

Hey guys,
Can anyone please help me find out what is the JDBC url for Yahoo Finance Database that stores the values of the historical stock quotes . I desperately need it for my java application in which I require to access the database in order to get the high, low, open, close quotes of a stock index. Any help would be greatly appreciated.
Thank you,
Vivek

Hi!!
The URL to the database on the yahoo webpage is http://chart.yahoo.com/d . If you go to that link then you will be able to access the database and do a search on it.
Please reply. Any help will be greatly appreciated.
Thank you,
Vivek

JDBC URL for Two Oracle Nodes with different SID

Hi All,
I have two DB nodes which are running independently (Mean no RAC), I want to configure JDBC URL for these nodes that if one node goes down my application automatically connected to second one.
Both nodes have different HOST and SID but the tables i am going to access have same structure. we are using this DB for some logging purpose that's why we didn't choose RAC option.
Regards,
imran

For RAC database, I used:
jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALANCE=on)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=hostname)(PORT=port))(ADDRESS=(PROTOCOL=TCP)(HOST=hostname)(PORT=port)))(CONNECT_DATA=(SERVICE_NAME=servicename)))
For non RAC database you could ommit LOAD_BALANCE setting, and set correct hostname & port for both nodes. We connected using common service name. If your databases have different service names, then the SID will have to be part of ADDRESS somehow - maybe (SID=sid).
I have to mention though that unless the main reason behind your decision was lower cost without RAC (and you don't need to store any information apart from logs), it was a wrong decision. If you decide to store any additional information in the database for whatever reason (new requirements), you are in trouble.

Can't use JDBC URL for multiple LDAPs

ColdFusion 8,0,1,195765 Enterprise (Trial)
We use Oracle OID (LDAP) instead of tnsnames.ora to resolve database connection strings. This is how I specify one LDAP JDBC URL. On the CF admin page, Server Settings, Java and JVM, ColdFusion Class Path is set to C:\oracle\product\10.2.0\db_1\jdbc\lib\ojdbc14.jar. Under Data & Services, Data Sources, create a new source. Set JDBC URL to
jdbc:oracle:thin:@ldap://mdaoid1.mycompany.com:389/mdad2,cn=OracleContext,dc=mycompany,dc= com
where mdaoid1 is one of the two Oracle OID servers that resolve connection strings, and mdad2 is an entry in the two OID's sync'ed to each other. That works.
According to many sources based on Google search for "space separated LDAP URLs", I should be able to add another LDAP server separated by space. Now I append " ldap://mdaoid2.mycompany.com:389/mdad2,cn=OracleContext,dc=mycompany,dc=com" (no quotes, added to indicate leading space) to that string. Upon clicking Submit, I get
Connection verification failed for data source: orcl10g3
java.sql.SQLException: For input string: "389 ldap:"
The root cause was that: java.sql.SQLException: For input string: "389 ldap:"
(orcl10g3 is the CF data source name I'm creating) Some say I need to replace space with %20 in the double LDAP URL. With %20, I get error
Connection verification failed for data source: orcl10g3
java.sql.SQLException: Io exception: JNDI Package failurejavax.naming.InvalidNameException: Invalid name: mdad2,cn=OracleContext,dc=mycompany,dc=com ldap://mdaoid2.mycompany.com:389
The root cause was that: java.sql.SQLException: Io exception: JNDI Package failurejavax.naming.InvalidNameException: Invalid name: mdad2,cn=OracleContext,dc=mycompany,dc=com ldap://mdaoid2.mycompany.com:389
Question: How do I add more than one LDAP server to the JDBC URL so I can achieve failover and load balance?
Yong Huang
yong321 at yahoo.com

The message above was posted by me two years ago and was brought to my attention today. Here's a short update: The network team added a load balancer mdaoid in front of, and resolved to, mdaoid1 and mdaoid2 (in round-robin fashion). The problem described in this thread is bypassed because the JDBC URL can simply use one-OID format, in which mdaoid is used as the LDAP server.

What is the method of getUserName() for JDBC DataSource in JDeveloper 11g.

Hi All,
I am facing a issue about getUserName() Method.
The below method
getDBTransaction().getConnectionMetadata().getUserName()
working fine for JDBC URL While the same method not working for JDBC DataSource.
So What is optional method for getUserName() for JDBC DataSource, I need JDBC DataSource because in Our Standalone weblogic server we using data source.
Maroof

Hi Vohar,
JNDI is there then how we can get user name you have any idea?
Our Connection.xml look like below
user oraJDBC 1500 192.168.0.0 user1 thin

Java Mapping for JDBC Interface

Hi,
please help on java mapping for my jdbc interface.
my java code for jdbc is:
Created on May 7, 2008
TODO To change the template for this generated file go to
Window - Preferences - Java - Code Style - Code Templates
package XiMappingDB2.com.xi.test;
@author miracle
TODO To change the template for this generated type comment go to
Window - Preferences - Java - Code Style - Code Templates
Created on May 2, 2008
To change the template for this generated file go to
Window>Preferences>Java>Code Generation>Code and Comments
package com.xi.test;
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.Statement;
import java.util.HashMap;
import java.util.Map;
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import org.w3c.dom.Document;
import org.w3c.dom.Element;
import org.w3c.dom.Node;
import org.w3c.dom.NodeList;
import com.sap.aii.mapping.api.AbstractTrace;
import com.sap.aii.mapping.api.MappingTrace;
import com.sap.aii.mapping.api.StreamTransformation;
import com.sap.aii.mapping.api.StreamTransformationConstants;
import com.sap.aii.mapping.api.StreamTransformationException;
@author kotla
To change the template for this generated type comment go to
Window>Preferences>Java>Code Generation>Code and Comments
public class NameMerge implements StreamTransformation {
     private Map param = null;
     private MappingTrace trace = null;
     public void setParameter(Map param){
     this.param = param;
     if (param == null) {
     this.param = new HashMap();
     public void execute(InputStream input, OutputStream output)
     throws StreamTransformationException {
     AbstractTrace trace = null;
     String RESULT = new String();
     trace =
     (AbstractTrace) param.get(
     StreamTransformationConstants.MAPPING_TRACE);
     try {
    //Create DOM parser
    DocumentBuilderFactory factory =
    DocumentBuilderFactory.newInstance();
    DocumentBuilder builder = factory.newDocumentBuilder();
     //Parse input to create document tree
     Document doc = builder.parse(input);
                trace.addInfo(doc.toString());
      //          Map the elements
    Node root = doc.getFirstChild(); // gets the root element
     NodeList children = root.getChildNodes();
      for (int item = 0; item < children.getLength(); item++) {
      if (children.item(item) instanceof Element) {
      root = (Element) children.item(item);
      NodeList ch = root.getChildNodes();
      RESULT = RESULT.concat(ch.item(0).getNodeValue() + " ");
      trace.addInfo(RESULT); }
      catch (Exception e) {
           trace.addDebugMessage(e.getMessage());
   //Return the output document
   String document_exit = "<?xml version=\"1.0\" encoding=\"UTF-8\"?><ns0:Person2 xmlns:ns0=\"urn:xxxxx.com:test:mapping:lookups\"><RESULT>"
   + RESULT
   + "</RESULT></ns0:Person2>";
     insertDB(RESULT);
   try
        output.write(document_exit.getBytes());
         catch (IOException e1) {
        trace.addDebugMessage(e1.getMessage());
public void insertDB(String DETAILS){
    Statement stmt = null;
    Connection conn = null;
    try {
      conn = getConnection();
      conn.setAutoCommit(false);
      stmt = conn.createStatement();
      stmt.execute("insert into KUMAR(DETAILS) values ('"DETAILS"')");
      //System.out.println ('"DETAILS"');
      conn.commit();
      stmt.close();
      conn.close();
    } catch (Exception e) {
      System.err.println("Error: " + e.getMessage());
      e.printStackTrace();
public Connection getConnection() throws Exception {
    String driver = "com.ibm.db2.jcc.DB2Driver";
    String url = "jdbc:db2://172.17.4.24:50000/SAMPLE";
    String username = "miracle";
    String password = "sairam";
    Class.forName(driver);
    Connection conn = DriverManager.getConnection(url, username, password);
    return conn;
but we are getting the following error:Linkage error occurred when loading class JavaDatabaseApp/XiMappingDB2/com/xi/test/NameMerge (http://FILE2JDBC_US, 7d7b3141-f4d1-11dc-b25e-d5d5c0a80198, -1)
Start of test
LinkageError at JavaMapping.load(): Could not load class: JavaDatabaseApp/XiMappingDB2/com/xi/test/NameMerge
java.lang.NoClassDefFoundError: JavaDatabaseApp/XiMappingDB2/com/xi/test/NameMerge (wrong name: XiMappingDB2/com/xi/test/NameMerge) at java.lang.ClassLoader.defineClass0(Native Method) at java.lang.ClassLoader.defineClass(ClassLoader.java:539) at java.lang.ClassLoader.defineClass(ClassLoader.java:448) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingLoader.findClass(RepMappingLoader.java:175) at java.lang.ClassLoader.loadClass(ClassLoader.java:289) at java.lang.ClassLoader.loadClass(ClassLoader.java:235) at com.sap.aii.ibrep.server.mapping.ibrun.RepJavaMapping.load(RepJavaMapping.java:136) at com.sap.aii.ibrep.server.mapping.ibrun.RepJavaMapping.execute(RepJavaMapping.java:50) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingHandler.run(RepMappingHandler.java:80) at com.sap.aii.ibrep.server.mapping.rt.MappingHandlerAdapter.run(MappingHandlerAdapter.java:107) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInterfaceMapping(ServerMapService.java:127) at com.sap.aii.ibrep.server.mapping.ServerMapService.transform(ServerMapService.java:104) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.transform(MapServiceBean.java:40) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0.transform(MapServiceRemoteObjectImpl0.java:167) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0p4_Skel.dispatch(MapServiceRemoteObjectImpl0p4_Skel.java:104) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170).
please solve this issue.

Uday,
May be you have uploaded class file into external definitions.
You need to Zip the class file into .jar and then upload into external definitions of integration repository
Regards,
Kiran Bobbala

How to create db conn for JDBC-ODBC Bridge for MS Access in ADF APP?

Sir,
How to create db conn for JDBC-ODBC Bridge for MS Access in ADF APP?
Regards

Hello Every Body!
I succeeded in getting connect to the ms access database in adf application in jdeveloper as below:
First in control panel to to admin tools and go to data source(odbc) and create system dsn as bellow pic
Then go to jdeveloper resources ide conn and then database and new database conn and then select jdbc-odbc briddge and then give custom jdbc url as bellow pic
Cheers
tanvir

How do build URL in jdbc connection?

I am doing one program in java.
I created a database in Microsoft sql server 2005.
In jdbc connection ,They need a URL but i don't know how do build a URL....
so ,please give the source code for build a URL...
and also give one example for jdbc connection using MSsql server 2005...

Arun02006 wrote:
I am doing one program in java.
I created a database in Microsoft sql server 2005.
In jdbc connection ,They need a URL but i don't know how do build a URL....You don't "build" a URL; it's just a String with a required content.
so ,please give the source code for build a URL...Look in the docs for your JDBC driver.
and also give one example for jdbc connection using MSsql server 2005...http://www.exampledepot.com/egs/java.sql/ConnectSqlServer.html
%

Error Code Definition for JDBC Thin driver

Would like to know where I can find the definition of error codes
for JDBC thin driver to Oracle 7 database. Right now, when I have
database errors, I get SQL execption with CODE=XXXXXX. Need to
know the definition of the error codes in order to decide whether
the application shall retry or quit or do something else. Thank
you in advance.
null

Hi,
thin client session Language is controlled by java Locale.
Based on testing code, ORA- messages are localized after the connection is successfully established. ORA- messages returned in the middle of connecting are in instance language.
So, as far as I can say, you need to catch exceptions from DriverManager.getConnection(url, info); and translate them on your own.
Once the connection is successfully returned, ORA- message language is defined by java Locale.
Tests were performed on Oracle 10gR2 (both thin driver and DB).

SQL Server 2000 Driver for JDBC - Error establishing sockets

Hi there
I am using Microsoft SQL Server 2000 Driver for JDBC to connect to SQL Sever 2000. It is just a test application to see if it would connect to the datacase successfully. But I got the following errors. I already set up the classpath and installed all SQL Server 2000 Driver for JDBC sp 3. Dont know why it still failed...can anyone help me out of this? Thanks.
When i am using simple JDBC-ODBC bridge Driver it's working fine.
For this Server Pack3 , i have checked every thing like--
TCP / IP Poart is Enable.
I am working in client machine, my MSSQLServer 2000 Placed in server Machine.
when i am giving Telnet ServerIP 1433 it's giving following response.
connecting to ServerIP ....... could not open connection to the host , on port 1433:connection Failed
My Sample Code is :--
String user="sa";
String password="imcindia";
Connection con1 = null;
CallableStatement cstmt = null;
Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver").newInstance();
con1=DriverManager.getConnection("jdbc:microsoft:sqlserver://ServerName:1433;DatabaseName=dmo1o2d",user,password);
Statement st=con1.createStatement();
st.execute("use dm0102d");
st.execute("setuser 'dm01012'");
cstmt = con1.prepareCall("{?=Call dms_ex_create_folder('ABC','18753','NB21','u')}");
cstmt.execute();
Here are Error Code :
java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Error establishing socket.
     at com.microsoft.jdbc.base.BaseExceptions.createException(Unknown Source)
     at com.microsoft.jdbc.base.BaseExceptions.getException(Unknown Source)
     at com.microsoft.jdbc.base.BaseExceptions.getException(Unknown Source)
     at com.microsoft.jdbc.sqlserver.tds.TDSConnection.<init>(Unknown Source)
     at com.microsoft.jdbc.sqlserver.SQLServerImplConnection.open(Unknown Source)
     at com.microsoft.jdbc.base.BaseConnection.getNewImplConnection(Unknown Source)
     at com.microsoft.jdbc.base.BaseConnection.open(Unknown Source)
     at com.microsoft.jdbc.base.BaseDriver.connect(Unknown Source)
     at java.sql.DriverManager.getConnection(Unknown Source)
java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Connection refused: connect
     at java.sql.DriverManager.getConnection(Unknown Source)
     at TestConnection1.main(TestConnection1.java:24)
one can help me to over come this problm,
Thanks in advance.
venkat

hey i also have this problem i have been looking for solution for this problem for along time i tried every possible solution i tried every service pack for the SQL but it didn't connect to the port!!!
it's a network problem ur java code is correct dont worry about it.
finally i had to install MySQL and it's work fine now but if u insist on usning SQL u have to use the JDBC-ODBC Bridge it will work by :
first add data source database , follow these steps
1- go to Administrative tools
2-Data Sources(ODBC)
3-System DNS tab and add then choose SQL SERVER the last option then finish
4-write the name; Note: this name is the one that u will write in ur URL for example if u write Hello the URL will be "jdbc:odbc:Hello"
5- choose the server, its recommended to write "." or (local)
6-change the database to its an important step to choose the database that u want to use, choose northwind if u want to use it
finish
second
adding this code:
import java.sql.*;
class JdbcTest1 {
public static void main (String[] args) {
try {
// Step 1: Load the JDBC driver.
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
// Step 2: Establish the connection to the database.
String url = "jdbc:odbc:Hello";
Connection conn = DriverManager.getConnection(url,"user1","password");
} catch (Exception e) {
System.err.println("Got an exception! ");
System.err.println(e.getMessage());
it will work without any problems

Error establishing socket (Microsoft SQL Server 2000 Driver for JDBC)

I tray connect to MS-SQL2000 using JDeveloper and retrieve an error: "[Microsoft][SQLServer 2000 Driver for JDBC]Error establishing socket.[Microsoft][SQLServer 2000 Driver for JDBC]PC160832\NCI_DBA_01"
I followed the steps:
1 - Install the JDBC Driver for MS-SQL2000
2 - Create a new AddJavaLibPath :"AddJavaLibPath C:/Program files/Microsoft SQL Server 2000 Driver for JDBC/lib"
3 - Specify Default Project Libraries: "msbase.jar, msutil.jar and mssqlserver.jar"
4 - Create a new connection: "Java class name: com.microsoft.jdbc.sqlserver.SQLServerDriver" "URL: jdbc:microsoft:sqlserver://PC160832\NCI_DBA_01:1433;SelectMethod=cursor"
5 - Retrieve the error: "[Microsoft][SQLServer 2000 Driver for JDBC]Error establishing socket.[Microsoft][SQLServer 2000 Driver for JDBC]PC160832\NCI_DBA_01"

Were you able to resolve this? If so could you tell me how. I have the same problem.
Thanks!!!

Problems! MS SQL Server 2000 Driver for JDBC.

In Dos-promt ill got only this message: com.microsoft.jdbc.sqlserver.SQLServerDriver
What is wrong and is there someone that can help me out?
I have installed Microsoft SQL Server 2000 Driver for JDBC and set the path like this in the system, advance, environment variable:
.;D:\Program Files\Microsoft SQL Server 2000 Driver for JDBC\lib\msbase.jar;D:\Program Files\Microsoft SQL Server 2000 Driver for JDBC\lib\msutil.jar;D:\Program Files\Microsoft SQL Server 2000 Driver for JDBC\lib\mssqlserver.jar
This is the source code i use to test the connection:
import java.sql.*;
public class Exercise2_1 {
static String driver = ("com.microsoft.jdbc.sqlserver.SQLServerDriver");
static String url= "jdbc:microsoft:MinTest;ah;modeerf";//sqlserver://H:1433;user=ah;password=modeerf";
public static void main(String[] args) {
try {
     Class.forName(driver).newInstance();
     System.out.println("Loaded driver");
     Connection conn = DriverManager.getConnection(url);
     System.out.println("Connected to database");
     conn.close();
     System.out.println("Closed connection");
catch (Throwable e) { System.err.println(e.getMessage()); }

You printed the error message associated with the exception but didn't print the type of the exception. com.microsoft.jdbc.sqlserver.SQLServerDriver was probably a ClassNotFoundException meaning that the VM couldn't find the jars.
You say you put the jars in the path. They should actually be in the class path. Either set the CLASSPATH environment variable or pass it in to the Java VM via the -cp option.
One more thing. Seeing as the paths that you installed the JDBC driver into contain spaces you may need to put quotes around the path names or use the MSDOS short names for those directories.
Col

Portal Test Connection Failed for JDBC Connector

Hi,
We are trying to create a JDBC system in EP to connect SQL Server 2005 database. Our aim is to build a model in VC using data services from SQL Server 2005.
We deployed the Driver file sqljdbc.jar and connection was successful when tested by creating a data source in Visual Administrator-> JDBC Connector
We have created a system in EP with user mapping type (admin,user) and user mapping also done for system alias with the SQL Server administrator user id and password. UME is maintained in ABAP Stack. When we try for test connection with the system created in EP for JDBC connection, the system throws an error message like Connection failed. Make sure user mapping is set correctly and all connection properties are correct
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the back end application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
The following are the URL and driver class name:
URL: jdbc:sqlserver://<host_name>:1433;DatabaseName=db_ name
Driver class name: com.microsoft.sqlserver.jdbc.SQLServerDriver
Is there any other setting to be maintained in the Visual Administrator or in the Portal?
Kindly let us know any clue to overcome this issue.
Quick response highly appreciated.
Regards
Saravanan.r

Hi Saravanan and Sathish,
not sure how far you got with this. I had the same problem or at least a very similar one with access to MS SQL Server 2005 and solved it. I followed essentially very similar steps with a couple of minor twists:
1) copied the sqljdbc.jar file to the storyboard server and set the classpath environment variable to point to it.
2) I did not create a data source, just created a new driver "SQLServer".
3) Under Connector Container I cloned SDK_JDBC as "SDK_SSQL".
4) The Visual Composer property vc.bi.sqlEditor Enabled should be set to true for you to be able the SQL Editor in the Data Service in VC.
In the portal I created a system of type BI_JDBC from a template.
The connection url and driver class were as in the thread:
URL: jdbc:sqlserver:ipaddress:1433;DatabaseName=name
Driver: com.microsoft.sqlserver.jdbc.SQLServerDriver
ConnectionFActoryClass as above under 3.
User rights: admin,user
The user mapping to the system alias should be as described.
This should allow you to use the data service in VC to access SQL Server tables. If access to stored procedures (sometimes quite useful) is required, this would need to utilise the p9sqlserver.jar file already on the server.
Best Regards
Felix Logemann

Url for JDBC

Similar Messages

Maybe you are looking for