URL Opens only the first Project in an Area

Hello All,
RoboHelp Server 8 & RoboHelp 8
I am getting ready to have our developers redirect our online help to RH Server instead of where it is currently housed. I am interested in using the shortened URL:
http://<server-name>/robohelp/server?prj=<project-name>&area=<area-name>
I have two projects in each area. When I test the URL for the first project in an area, it works successfully. However, when I test the URL for the second project in the same area, it only re-opens the first project. For example:
http://help.acme.com/robohelp/server?prj=Project1&area=Area1
http://help.acme.com/robohelp/server?prj=Project2&area=Area1
So when I click the Project1, it opens and is correctly pulling the right help. Clicking the second URL, opens up Project1 instead of Project2 as it is supposed to.
It is like it only reads the first project in an area. Is it cacheing somewhere? Flushing DNS and clearing history doesn't do anything.
Someone please tell me the obvious mistake I am sure I am making.
Thanks in advance.
Julie

OK I think I have a solution to your problem. It appears that the issue is with the underscores in your project names. If you remove them you'll be OK to host both projects in the same area. Just rename your projects in RoboHelp and republish. You'll have to delete the old projects from the Web Administrator though.
If this works, and I've tested it myself so it should, may I ask you to submit a bug report to Adobe using the link below:
http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
The RoboColum(n)
@robocolumn
Colum McAndrew

Similar Messages

How do I open all subsequent windows of firefox open in full screen without pressing the f11, only the first window opens in full screen

Only the first firefox window opens in full screen, any subsequent windows I open are in normal size and I have to keep hitting the f11 key

Take a look at this extension. <br />
https://addons.mozilla.org/en-US/firefox/addon/r-kiosk/
Real Kiosk is a Firefox extension that defaults to full screen ...

I'm trying to open a 900kb Word doc (240pages) in Pages but get this error message: Import Warning - A table was too big. Only the first 40 columns and 1,000 rows were imported.

I'm trying to open a 900kb Word doc (240pages) in Pages but get this error message: Import Warning - A table was too big. Only the first 40 columns and 1,000 rows were imported.

Julian,
Pages simply won't support a table with that many rows. If you need that many, you must use another application.
Perhaps the originator could use a tabbed list rather than a table. That's the only way you will be able to contain a list that long in Pages. You can do the conversion yourself if you open the Word document in LibreOffice, Copy the Table, Paste the Table into Numbers, Export the Numbers doc to CSV, and import to Pages. In Pages Find and Replace the Commas with Tabs.
There are probably other ways, but that's what comes to mind here.
Jerry

I am trying to upload a project with multiple tracks to iTunes. only the first track seems to be uploading. what do I do?

I am trying to upload a project from garageband with multiple tracks to itunes but only the first track is uploading. what do i do to make them all upload together?

Couple of questions:
What type of Tracks are they (MIDI, AUdio, Drummer)?
WHen you play your Project, do You hear all Tracks playing?
What happens when you change the Track order, i.e. A-B-C to B-C-A? WHen you export, do you still get only one Track and if so, is it talways the first Track in the list or a specific Track regardless if it is the first, second, or third?
Are you sure you don't have any Tracks Muted or Soloed (which auto-mutes the other Tracks)?
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Case: When trying t work in a second desktop, a program cannot be used if open in the first desktop. The screen just moves back to the first deskt

When I try to work in a second desktop, a program cannot be used if already open in the first desktop. The screen just moves back to the first desktop. Anybody else have this issue?

Whether or not this behavior occurs depends upon various preference settings and upon how you try to access the application in question. Personally, I like to organize my desktops according to project, so I regularly have windows from the same application spread out over several desktops. No problem.
For example, I have a Safari window in Desktop 1 and I want a Safari window in desktop 2. If, while in desktop 2, I bring Safari to the front by clicking on the Dock icon, I can open a new window in the usual ways. I could also just control-click on the Safari icon in the dock to get a new window in desktop 2.
(The only application that is a little weird in this regard is Finder. You have to do the control-click on it or it will always switch to a space with a window open.)
To make all this occur, I have Safari assigned to no desktops (control-click on Safari icon, then on Options) and in Mission Control preferences (in System Preferences) I have "When switching to an application..." UNchecked.
(Note that, with these settings, if an application is already in front and you click on its icon - or click twice on the icon if the applcation is not in front - the OS will assume you are looking for another open window and will switch spaces to give you one.)
Hope this helps.
charlie

Export QT slideshow and only the first song plays.

I did not have this problem with the previous version. All songs are from a playlist and are not purchased on iTunes. The slide show plays fine in iPhoto and then when exported only the first song plays in the QT version and after it silence. Can anyone help with this?

Hi Dave,
This seems to be a new bug introduced after one of the updates.
Only one song exporting with Slideshows
Right now, this seems to be a know problem/bug. There have been some work-arounds. Don't know if the problem is with iPhoto, Quicktime or a combo of both.
-From Bob Worthington: re-ripping the cuts I wanted as background music for the DVD as a single cut in iTunes. I then made a playlist containing the one extended cut of music.
-Old Toad: share to Quicktime from iPhoto and then import the resulting movie into iMovie you can extract and delete the audio from the video and add the two songs to the video and save.
Quicktime Pro-open the movie and bring up the Movie Properties menu window. In the top window select the audio track and delete it.
If you want more than one song you'll have to join them together with iMovie or some other application. Then open that joined file with QT Player. Then do a select all and copy. Now go to the QT window of the movie and select the Edit->Add to Movie menu option. You don't want to scale it because it will change the play speed of the audio unless it's time is exactly the same as the movie.
You could go the other way, open the movie, select all and copy, and then past with scaling to the audio. That will change the speed of the movie and transitions to fit the audio track. In this case the resulting video file will have the name of the audio track file that you started with.
You may have to play with it a bit to get exactly what you want. Be sure to work with copies of all the media files for the project.
-Peter Burtwistle: I opened the Qt movie that iPhoto makes when you export to iDVD and removed the sound track.
Then made a new soundtrack by opening all three songs in QT, then cutting and pasting them together.
Finally use QT Pro's 'Add to Movie" option to add the soundtrack to the original movie.
This worked well and was fast to do too.
-Joe Lombardo: I ended up having to extend the songs by 20 seconds so I brought them all into GarageBand and made some edits. Then I exported them all to iTunes as a single track and used that for the slideshow
Lori

How can i use a breakpoint on the first project ?

This is a screenshot of my solution with two projects.
But the breakpoint will work only on the second one the TestScreenshot but i want to be also to use a breakpoint/s on the Capture project. Tried to make that the Capture will be scope Scope to This but it didn't change anything.

It's not in a release mode.
The first project the upper one the Capture is set to class library and Active (debug) Active (Any cpu) Any cpu
The second project the TestScreenshot is windows application Active (debug) Active (Any cpu) Any cpu
I can use a breakpoint/s on the TestScreenshot but can't use breakpoint/s on the class library project.

Only the first page is printed reduced as setup. All pages afterward are full size with information cut off. Recent problem. Can print from Safari just fine. How can I get all pages to be reduced size?

Question
Printing internet pages
Reduced print size
Only the first page is reduced and printed as desired
All pages after the first page are full size with information cut off
Recent problem never seen before
Can print from Safari and other software just fine
How can I get all pages to be reduced size?

One suggestion worked from the Firefox prints incorrectly link mentioned above by mha007. I'm thrilled since this has been annoying me for weeks. Thanks mha007!
Reset all Firefox printer settings
# Open your profile folder:
# On the menu bar, click on the Help menu and select Troubleshooting Information. The Troubleshooting Information tab will open.
# Under the Application Basics section, click on Show in Finder. A window with your profile folder will open.
# Note: If you are unable to open or use Firefox, follow the instructions in Finding your profile without opening Firefox.
# On the menu bar, click on the Firefox menu and select Quit Firefox.
# In your profile folder, copy the prefs.js file to another folder to make a backup of it.
# Open the original prefs.js file in a text editor (such as TextEdit).
# Remove all lines in prefs.js that start with print. and save the file.
# If something goes wrong when you open Firefox, close it again and overwrite prefs.js with the backup you made.

How do I print only the first page of multiple PDF documents?

I have about 1,500 PDF files (scientific papers) that I need to print only the first page of... Any suggestions on how to do this as a single job or as a few jobs? The files are organized in a bunch of different folders, so if there was some way to do this folder by folder, that would be ok too. Thanks!

Make sure that in System Preferences Printing & Fax pane you set the default printer to the one you want to use, then put all of these PDF files into their own folder, then open terminal and type the following (without hitting return afterward):
lpr -o page-ranges="1-1"
Then drag one of the PDF files into the terminal window (it will add it's path to the end of your command) and replace the file name with *.pdf, so it will look like this:
lpr -o page-ranges="1-1" /Users/todd/Documents/My\ Folder/*.pdf
Then hit return.

I am unable to print only the first few lines of an e-mail. Also, it will then print in a very small type and will also include extraneous information on the screen that are not part of the e-mail. Is there anything I can do about this annoying problem?

I can only print the first few lines of an e-mail, even when it is on "Full View" on my screen. Moreover, it prints with very small print that is hard to read and also contains additional material on the screen that is not part of the e-mail.
== This happened ==
Every time Firefox opened
== Since the first day I started using Firefox

I talked to Adobe Support tonight and found this issue to be a known problem with some of the Adobe Cloud products when using older hardware, in this case the C782.
So, we found a workaround. Unfortunately the work around isn’t efficient and adds more steps to their normal printing routine
Open InDesign and create, modify delete the card
Select FileàExport
A window will appear. Pick the location you wish to save the file
Once the File is saved another window will appear
“EXPORT Adobe PDF”
An Export to Adobe PDF window will appear. Accept all defaults. MAKE CERTAIN “VIEW PDF
After EXPORTING” is CHECKED
Select Export
Once EXPORT is complete the file will open automatically in Adobe Acrobat
Most likely the screen will be very large
Select the + - sign at the top of the page to adjust the page size to view the image
Select FileàPrint
The Print window will appear
Select the printer from the drop down
# of COPIES is just below Printer
Select OK
I hope this helps anyone who is having similar issues
Thanks

Only the first two episodes showing

When I do a search on my podcast in the iTunes Store, the show comes up fine but only the first two episodes are listed. When I click on the show image and go to the show page only those two show up, all four of the episodes are displayed in the other locations that follow the feed.
Does anyone know why this would happen?

Actually its really strange, the two missing episodes have been up for a while ( the most recent as of 3 days ago, the older about 12 days) and they never showed up. On a whim I decided to try to resubmit my feed address thinking that maybe I had giving it the wrong one by accident and was given the response that the feed was already taken. When I canceled out of it the new episodes showed up in iTunes. I don't know how but this seems to have prompted the system to recheck my feed and recognize that there were new items available.
Anyone know why this might be the case? Also, when I view it from the search panel only the first two episodes appear, when you open it by clicking on the image of out logo it shows all four. Any ideas on that? The podcast is called 3 Wise Woodies if you want to see what I mean about how it displays the episodes.
Thanks for you help.

Only the first image of table appears

Hello,
my problem concerns dynamically added images in templates designed with Template Builder 5.6 Build 45 for Word 2002 (10.4219.4219) SP-2 and Oracle E-Business Suite 11.5.10.2.
My template includes a simple table with an image field containing an URL. I created a dummy image with alternative text like url:{image_field}. The URL itself exists and works in the browser. Running now the report with example data as XML publisher admin, only the first image appears, followed by all other rows showing the same image. It’s always the first one that is repeated (of course I made sure that each element contains its specific URL). I also tried to use the concatenated string for building the specific URL at runtime, but in vain.
Is there anybody out there with a good idea?

I'm not sure what's going on, but I'm having a similar yet different issue with slideshow images. I have a full screen slideshow on a tablet site with 2 slides in it, but one of them shows up white/blank in preview. I've ensured both images are in the layers and assets and I've deleted the slideshow and started from scratch twice already. What's interesting is that if I move the images' order within the slideshow widget in the layers panel, I can see either one, but not both in rotation in the slideshow. I just did this same slideshow for the mobile version and that works fine, so I'm stumped.

Open to the first page in a document

Adobe Acrobat, reader and creator, both default to open a multiple page document, showing the page that was highlighted at the time that the document was saved. As a result, the next document viewer will see a page somewhere in the middle of the document when first opening that document. If that next viewer is not aware of where this page is in relation to the rest of the document he will not scroll up to the top to view the document from the first page. We have this happening on a regular basis with users who are not aware of the page thumbnails view option. Is there a way to set Acrobat (reader and creator) to default to always open to the first page in a document regardless of what page it was on at time the document was saved?

For Acrobat X I went to Tools - Pages - and the delete choice was grayed out. I thought I could get the same result by using the Print to Adobe PDF command. From any other application I can print to Adobe PDF, just not in Acrobat. Does Acrobat X not let you do this, or is it just on mine? And if it is only on mine, what do I do to fix it? By the way, I am able to delete pages from other documents, just not the particular document I am currently working with.
Any other suggestions anyone?

App file sharing: files are displayed only the first time...

clicking somewhere else and then back to the application that you want to share files are not there any more.
I've to close and re-open the itunes in order to see them again.
itunes is running on windows 7 64bit.
is this a bug ?
thank you.

Hi! I have the same, exact problem. The files are displayed only the first time I look at the apps listed under File Sharing. If I look at another app on the list, the files on the one I previously checked are gone when I look at it again. Is there any way to fix this? I have a Lenovo X61s on Windows XP Professional 32 bit.

QuickTime launches slow but only the first time

QuickTime is slow in Mac OS 10.7, that's been widely discussed.
In my case, QuickTime is slow to open up a video file (MP4, AVI, WMV, etc,), but only the first time. After I've successfully opened up the one video file, all subsequent video files open up quickly, even after quitting QuickTime.
However, after a restart it's the same old situation again.
Is QuickTime installing something, then removing it when the computer shuts down?

QuickTime is slow in Mac OS 10.7, that's been widely discussed.
In my case, QuickTime is slow to open up a video file (MP4, AVI, WMV, etc,), but only the first time. After I've successfully opened up the one video file, all subsequent video files open up quickly, even after quitting QuickTime.
However, after a restart it's the same old situation again.
Is QuickTime installing something, then removing it when the computer shuts down?

URL Opens only the first Project in an Area

Similar Messages

Maybe you are looking for