URLConnection and timeout

hi,
i read a lot of messages on forum and i just want to know if there is a setimeout method implements in the new java jsk1.4.2 or a plugins?

I was getting the same error while connecting through a proxy.
The following lines fixed the problem:
System.setProperty("http.proxyHost", "[your proxy's IP]");
System.setProperty("http.proxyPort", "[your proxy's port]");
Good Luck
matrixPooh www.bizdisplay.com

Similar Messages

Help please: URLConnection and timeout

I want to connect to a Internet URL and retrieve the HTML code, but I have error message: "Operation timed out: connect"
How I can resolve this?
Thanks.
<%
try {
URL theUrl = new URL("http://www.yahoo.com");
URLConnection uc = theUrl.openConnection();
InputStream content = uc.getInputStream();
BufferedInputStream in = new BufferedInputStream (content);
LineNumberReader lnr = new LineNumberReader (new InputStreamReader(in));
String tempStr = "";
StringBuffer str = new StringBuffer();
while ((tempStr = lnr.readLine()) != null)
str.append(tempStr);
out.println(tempStr);
in.close();
lnr.close();
catch(Exception e) { out.println("Error:"+e.getMessage()); }
%>

I was getting the same error while connecting through a proxy.
The following lines fixed the problem:
System.setProperty("http.proxyHost", "[your proxy's IP]");
System.setProperty("http.proxyPort", "[your proxy's port]");
Good Luck
matrixPooh www.bizdisplay.com

URLConnections and Input Streams

I am trying to get a jar file I have up on a web server.
First I make a connection to the server requesting the file..that works fine.
Second i want to use an input stream to bring in the file so i can read its contents.
The problem lies in using the InputStream to read a URL connection.
I have tried using the JarInputStream but that wont work.
Do I need to take my URLConnection and convert it to an object or data type that I am not aware of?
URL url = new URL("http://www.domain.com/myfile.jar");
URLConnection conn = url.openConnection();
JarFile in = new JarFile(new BufferedReader(new InputStreamReader(conn)));
Any ideas fellas?

At this point that is all I want to do. Just download the file.
Thats where I am having trouble.
Once I get it downloaded it should be fine.
Should I maybe write the input of the file coming off the server to input of a new file?

Authentification errors and timeouts!

Anybody else suffering again on the forum today?
I'm getting authentification errors galore atm .....
Will be bailing out soon methinks ....

Hi Guys
Really sorry you are still having problems. I'll send you both a PM so I can gather some specific info about this error and when you are seeing it.
I haven't experienced it myself today so need to understand more about how and when it is happening so we can get it fixed.
Appreciate your patience with this - I know it's frustrating to get errors and timeouts when you are posting responses etc.
Thx
Kerry
Retired BTCare Community Manager - StephanieG and SeanD are your new Community Managers
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

OSB Customization files 2 set Retry Application Errors and Timeout props

I know it's possible to set Endpoint URI, Retry Count and Retry Iteration Interval properties using customization files, but what about other properties? I am particularly interested in setting Retry Application Errors and Timeout for a HTTP business services. If it's not possible to do with customization files is there another way of setting them without having to go though each service in the console?
Edited by: user1019490 on Sep 23, 2010 2:45 AM

Yes, I guess this can be done as there is provision in ALSBCustomizationFile.xml. Below is the snippet from ALSBCustomizationFile.xml
<cus:envValueAssignments>
<xt:envValueType>Service URI Table</xt:envValueType>
<xt:location xsi:nil="true"/>
<xt:owner>
<xt:type>BusinessService</xt:type>
<xt:path>TestProject/BusinessService/TestBS</xt:path>
</xt:owner>
<xt:value>
<tableElement xmlns="http://www.bea.com/wli/sb/transports">
<URI>http://www.test.com/testService.asmx</URI>
<weight>0</weight>
</tableElement>
</xt:value>
</cus:envValueAssignments>
<cus:envValueAssignments>
<xt:envValueType>Service Retry Count</xt:envValueType>
<xt:location xsi:nil="true"/>
<xt:owner>
<xt:type>BusinessService</xt:type>
<xt:path>TestProject/BusinessService/TestBS</xt:path>
</xt:owner>
<xt:value xsi:type="xs:string" xmlns:xs="http://www.w3.org/2001/XMLSchema">0</xt:value>
</cus:envValueAssignments>
<cus:envValueAssignments>
<xt:envValueType>Service Retry Iteration Interval</xt:envValueType>
<xt:location xsi:nil="true"/>
<xt:owner>
<xt:type>BusinessService</xt:type>
<xt:path>TestProject/BusinessService/TestBS</xt:path>
</xt:owner>
<xt:value xsi:type="xs:string" xmlns:xs="http://www.w3.org/2001/XMLSchema">0</xt:value>
</cus:envValueAssignments>
Regards,
Karthik

Aironet 1310 Bridge, delay and timeout problem

Hi,
We have 3 Aironet 1310 Wireless Bridge. 1 of them is Root bridge, others non-root and Workgroup bridge. Normally ping delays are 6-7 ms avarage, but somedays 200-300 ms and timeouts. I dont understand what is the reason. Any other wireless telephone? or other 2.4 Ghz antenna? or ground voltage of buildings? 1 of the non-root bridge's configuration is at the attachment.
Regards.

hi i think it is not slution because i have 4 root bridge and i've 45 non-root bridge and somedays there are alot of troubles about telecommunication with ip phone and i chose 11 channels all but i have toruble about this

BPEL Correlation and timeouts

Hello,
I'd like to ask question regarging BPEL correlation and timeouts.
According to BPEL SE lifecycle schema - if BPEL SE receives message with defined correlation and value of the correlator in message doesn't match any active process instance BPEL keeps message waiting for process instance with particular correlation value
This behaviour is undesirable in situations where no process with particular correlator ever appears.
If the BPEL client is connected via HTTP/SOAP BC, then client timeout will just terminate HTTP connection to binding component, message exchange between BC and BPEL isn't closed.
I cannot manage to cancel connection due to timeout from EJB (if BPEL client is EJB, so it is connected via JavaEE SE).
Is there any possibility in BPEL SE to refuse messages correlated to non-existing process instances? Or is there any possibility to set client timeout from SOAP BC or J2EE SE on message-exchange level?
Vladimir

This is a feature that we would like to provide in the BPEL SE. In the immediate future we may be able to address this in part specifically the case you mentioned. The other cases that also needs to be addressed is where the incoming message's correlation ID matches with a running instance, but doesn't get consumed because the instance never took the path of consuming the message. These other use cases will be addressed as a feature later.
thanks,
-Kiran B

Get_sqlagent_job_status long durtions and timeouts

Hi,
In Reporting Services, ReportSever database there is the Get_sqlagent_job_status procedure. This procedure is calling the undocumented system procedure xp_sqlagent_enum_jobs to
check the subscription jobs statuses. In most of the times the execution finishes in milliseconds. In rare cases however, the execution is taking much longer and when it reaches 30sec procedure is timing out with the following error:
Msg 22023, Sev 16: SQLServerAgent exceeded the allowed timeout for
creating the shared job list. The Jobs cannot be enumerated.
During long executions the wait type is MSQL_XP. Regarding msdn it:
Occurs when a task is waiting for an extended stored procedure to end. SQL Server uses this wait state to detect potential MARS application deadlocks. The wait stops when the extended stored procedure call ends.
My question is why sometimes the xp_sqlagent_enum_jobs procedure is running longer and timeout? I couldn’t trace on which resources or processes it is waiting. When searching the
Microsoft sites, I only found info that this is undocumented procedure and should not be used. Why then then it is being used in the ReportServer database that is being setup during the Reporting Services installation.
What can be done to get rid of the timeout errors from Get_sqlagent_job_status procedure?
I hope anyone can help.
Regards,
Marek

Hi. We have the exact same problem. We have put in all the notes mentioned here and more.
We have looked at the variant and have restricted it as much as possible, but we create about 30000 carts a month and some of them are not complete for a long time so we can not restrict the days too much.
We try to run BBP_GET_STATUS_2 for 90 day timeframe, as this covers much of it, but it takes over 10 hours to run.
We would then want to run more than 90 days once a week or something, but this takes 24 hours to run.
Does anyone have any more ideas how we can improve this?
I am thinking about stopping running the program and use a user exit in MIRO and MIGO to RFC into SRM and run the program for just the 1 applicable cart at a time, but this seems a bit drastic.
I have asked SAP all this but they told us the same as above, try the notes, restrict the variant.
Regards,
Dave.

Brcmsmac connection stalling and timeout (14e4:4727)

Using a netbook with a broadcom chipset and having wireless problems, pulling my hair out for a couple of months now. I've seen posts from other people with the exact same card for whom it works fine. My problem is constant connection stalling and timeouts. The wireless card connects and works for a few seconds before the connections stalls or speeds drop to very low speeds for about 30 seconds. After that the connection speeds increases for a few seconds and then it drops again.
For example, when I install packages from pacman it mostly goes like this. The speed drops, sometimes below 1KB/s resulting in a connection timeout and sometimes it goes back to about 300KB/s for a while, my max internet speed is 1500 KB/s btw.
libexif-0.6.21-2-x86_64 269.1 KiB 24.1K/s 00:02 [###################################################-------------] 81%
Wireless card info:
$ lspci -vnn | grep -i net
03:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter [14e4:4727] (rev 01)
07:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
I already tried these things on a fully updated system:
https://wiki.archlinux.org/index.php/Wi … _times_out
Changing/forcing a specific b/g/n mode in the router configuration
Changing router channels, resetting router, upgrading router firmware
The broadcom wl driver instead of brcmsmac (this used to work with kernel <= 3.14)
Reinstalling the system
Upgrading bios firmware
Using another router
Using the card with another non unix OS (card works fine)
It's really frustrating, I hope someone has any ideas left.

Using a netbook with a broadcom chipset and having wireless problems, pulling my hair out for a couple of months now. I've seen posts from other people with the exact same card for whom it works fine. My problem is constant connection stalling and timeouts. The wireless card connects and works for a few seconds before the connections stalls or speeds drop to very low speeds for about 30 seconds. After that the connection speeds increases for a few seconds and then it drops again.
For example, when I install packages from pacman it mostly goes like this. The speed drops, sometimes below 1KB/s resulting in a connection timeout and sometimes it goes back to about 300KB/s for a while, my max internet speed is 1500 KB/s btw.
libexif-0.6.21-2-x86_64 269.1 KiB 24.1K/s 00:02 [###################################################-------------] 81%
Wireless card info:
$ lspci -vnn | grep -i net
03:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter [14e4:4727] (rev 01)
07:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
I already tried these things on a fully updated system:
https://wiki.archlinux.org/index.php/Wi … _times_out
Changing/forcing a specific b/g/n mode in the router configuration
Changing router channels, resetting router, upgrading router firmware
The broadcom wl driver instead of brcmsmac (this used to work with kernel <= 3.14)
Reinstalling the system
Upgrading bios firmware
Using another router
Using the card with another non unix OS (card works fine)
It's really frustrating, I hope someone has any ideas left.

This item could not be crawled because the repository did not respond within the specified timeout period. Try to crawl the repository at a later time, or increase the timeout value on the Proxy and Timeout page in search administration. You might also wa

HI,
I got the error message in the crawl log as below after performing the Full Crawl
This item could not be crawled because the repository did not respond within the specified timeout period. Try to crawl the repository at a later time, or increase
the timeout value on the Proxy and Timeout page in search administration. You might also want to crawl this repository during off-peak usage times.
To overcome the above error,many forums have suggested me to increase the time out which is under Farm level settings.But if time out gets increased,performance impacts as well.
So please suggest me to overcome this error without increasing the timeout.Thanks in advance
Regards,
Sudheer
Thanks & Regards, Sudheer

Hi,
I understand that you get the error message when performing a full crawl. I have seen similar cases caused by IE proxy settings. You can try to edit the Internet Options>Connections>LAN settings. Uncheck ‘Automatically detect settings’.
For more information, please refer to this site:
Search error: crawler could not connect to the repository:
http://social.technet.microsoft.com/forums/en-US/sharepointadminprevious/thread/c230ab36-8d0b-4c25-bf86-33136d17642b/
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

E4200 wireless drops and timeouts

Hello,
I have the latest version firmware
I am constantly getting dropped and timeouts accross all of my devices this has been hapening for several months now I think ever since I upgraded to 1.0.04
It says no internet access when the wired computers have it fine.
Android phones, windows 7 pc, and chromebook.

http://www.metageek.net/products/inssider/

Alert message and timeout PJC

Hi,
We are using timeout PJC functionality for our web forms. It's working fine and the form application display the alert/message whenever inactivity time reaches(which is set for 30 minutes). The issue is when you minimized the form application by clicking the browser's minimized button and now let say you are working in Toad or some other application and in a mean time your form application which is minimized and its inactivity time reaches but the alert/message is hidden with the minimized form application. Is there anyway to show the alert/message in my current working window/application? Any advise/suggestion please?
Thanks
RM

Hi Francois,
The frmall.jar is already in C:\Oracle10g_ds\forms\java location. But still when i try to compile TimeoutPJC.java in jdeveloper i get the comilation errors.
Compiling...
C:\Oracle10g_ds\jdev\bin\ojc.exe -noquiet -warn -nowarn:320 -nowarn:486 -nowarn:487 -deprecation:self -target 1.2 -encoding Cp1252 -g -d C:\Oracle10g_ds\jdev\mywork\Application1\Project\classes -make C:\Oracle10g_ds\jdev\mywork\Application1\Project\classes\Project.cdi -classpath C:\Oracle10g_ds\jdk\jre\lib\rt.jar;C:\Oracle10g_ds\jdk\jre\lib\i18n.jar;C:\Oracle10g_ds\jdk\jre\lib\sunrsasign.jar;C:\Oracle10g_ds\jdk\jre\lib\jsse.jar;C:\Oracle10g_ds\jdk\jre\lib\jce.jar;C:\Oracle10g_ds\jdk\jre\lib\charsets.jar;C:\Oracle10g_ds\jdk\jre\classes;C:\Oracle10g_ds\jdev\mywork\Application1\Project\classes -sourcepath C:\Oracle10g_ds\jdev\mywork\Application1\Project\src;C:\Oracle10g_ds\forms\demos\timeout\src;C:\Oracle10g_ds\jdk\src.zip C:\Oracle10g_ds\forms\demos\timeout\src\oracle\forms\demos\TimeoutPJC.java
compiling C:\Oracle10g_ds\forms\demos\timeout\src\oracle\forms\demos\TimeoutPJC.java
[1:07:42 PM] Compilation complete: 6 errors, 0 warnings.
Project: C:\Oracle10g_ds\jdev\mywork\Application1\Project\Project.jpr
C:\Oracle10g_ds\forms\demos\timeout\src\oracle\forms\demos\TimeoutPJC.java
Error(46,28): cannot access class oracle.forms.engine.Main; file oracle\forms\engine\Main.class not found
Error(47,29): cannot access class oracle.forms.handler.IHandler; file oracle\forms\handler\IHandler.class not found
Error(48,32): cannot access class oracle.forms.properties.ID; file oracle\forms\properties\ID.class not found
Error(49,24): cannot access class oracle.forms.ui.CustomEvent; file oracle\forms\ui\CustomEvent.class not found
Error(50,24): cannot access class oracle.forms.ui.VBean; file oracle\forms\ui\VBean.class not found
Error(52,33): class VBean not found in class oracle.forms.demos.TimeoutPJC
Thanks RM

Kernel startup failure and timeout error during J2EE startup

We are working on getting a DR (Disaster recovery) instance of EP6.0 started up after a restore from an offline backup of our Production Portal. This is on a separate piece of hardware. This is the J2EE version 6.2 and Ep 6.0 Sp2 Patch 37. This version is working fine on the Production Portal. When we start up the J2EE (using go.bat or the framework) we get the following error-
[OS: SunOS] [VM vendor: Sun Microsystems Inc.] [VM version: 1.3.1_11-b02] [VM type: Java HotSpot(TM) Client VM]
SAP J2EE Engine Version 6.20 PatchLevel 78993.20 is starting...
Loading: LogManager ...
Loading: SystemThreadManager ...
Loading: ThreadManager ...
Loading: TimeoutManager ...
Loading: MemoryManager ...
Loading: PoolManager ...
Loading: PolicyManager ...
Loading: IpVerificationManager ...
Loading: ClusterManager ...
Loading: ClassLoaderManager ...
Loading: SwapManager ...
Loading: LockManager ...
Loading: R3StartupManager ...
Loading: ServiceManager ...
Loading core services:
Starting core service monitor ... done. (215 ms)
Starting core service p4 ... done. (310 ms)
Starting core service log ... done. (447 ms)
Starting core service dbms ... done. (1145 ms)
Starting core service security ... done. (3008 ms)
Starting core service naming ... done. (5369 ms)
Starting core service admin ... done. (5616 ms)
Timeout starting core services. Kernel not started.
[ServiceManager]: * Timeout starting core services. Kernel not started.
Timeout starting core services.
Not started services:
deploy
file
[ServiceManager]:
Timeout starting core services.
Not started services:
deploy
file
Loading: ServiceManager returned false!
Kernel not loaded. System halted.
[Framework -> criticalShutdown] Kernel startup failed.
We need assistance as soon as possible.
Any pointers would help and will be greatly appreciated!
S. Rao

We resolved this error. It was a timeout setting that we needed to change on the J2EE that allowed it to bypass the timeout error.

Soap adapter performance and timeout

Hi
I have two questions considering SOAP adapter.
I have created a SOAP service in XI and it works. Now the non-functional requirements for this service are very high. Specially I am in trouble with two things.
The service must give up real quick. If XI has not managed to give out the answer with 10 seconds it should send the time-out error message to the client. The trick is... for all other scenarios in the same integration server, the time-out must be a lot bigger.
Is it possible to set the time-out parameter for a specific SOAP sender communication channel? If Yes, then how?.
The second ting.. maybe it is not a issue at all. Are synchronous soap calls processed in parallel? Or do I have to set some parameter to enable parallel processing (the SOAP service is estimated to receive about 4 request per second and if each request takes some 0,5-0,6 seconds to answer - there is a definite need for parallel processing.
Could somebody led some light on these issues. Thanks...

Hi
Thanks for this. So far clear enough... now what I don't understand... if I create a new port, all my http-like adapters (SOAP, HTTP...) are available from these? I after I have created another port (at the moment there are 0-2 already)... I can call my channel: http://<host>:<oldport>/MessageServlet/blaa-blaa and http://<host>:<newport>/Messageservlet/blaa-blaa ... or not?
and how do I change the timeout for this new port? Gaurav stated in his (her?) post "You need to configure that specific service for the separate timeout you create." There is something that I can not attach to ... but seems like I am not very good in asking also
Thanks for hints...
Heiko

Query and timeout

On my BSP application a call a query with RSAQ_REMOTE_QUERY_CALL .... Problem : this function spend 6 minutes... SO I have alway a timeout ...
IS somebody know how to fix this issue ?

<a href="/people/mark.finnern/blog/2003/09/24/bsp-in-depth-confusion-between-stateless-stateful-and-authentication">BSP In-Depth: Confusion between Stateless, Stateful and Authentication</a> does have a sidebar that explains about the different timers that can mess up your application.

URLConnection and timeout

Similar Messages

Maybe you are looking for