US BANK APP issue

I installed US Bank app and I can not activate it due to US Bank not adding iphone to their list of Verizon devices. Anyone else have this issue?

theblueangel wrote:
Just select that you have the AT&T iphone and it works fine. Weird, but it works.
Cool! Thank you! It worked for me also!
 US Bank responded to me with a lame email saying they could do nothing and it will be an unkown time frame before they would add device.

Similar Messages

  • I have registered a credit card for purchasing apps from the app store. My bank has issued a new chip based card and now the 16 digit numbers have changed. How do I register the new card for flowless purchases?

    I have registered a credit card for purchasing apps from the app store. My bank has issued a new chip based card and now the 16 digit numbers have changed. How do I register the new card for flowless purchases?

    Go to Apple Menu > App Store > View my account > sign in and then edit the payment details with the new card details.  
    I am assuming that your card and supporting bank are in the same country as your residential (billing) address and that you are using the App Store of that country.

  • Has anyone had a problem taking successful pictures of checks for a bank app using a Galaxy S5?

    I had no problems with making phone deposits on my Galaxy Stratosphere or on my husband's Galaxy S4.  However, after at least 20 tries on my new Galaxy S5, I kept getting error messages from the bank app indicating that it couldn't read it, to make sure the corners were within the frame or to make sure the MICR code was within the frame.  Even though I was certain I met all those criteria, and had plenty of light, nothing worked.  I even tried an old check that had been previously deposited via a different phone to see if it would work, but I had the same issues.  Any advice?  Thanks.

    According to BofA Mobile support, the camera on the GS5 is very sensitive to the lighting conditions. They suggested to try a lower lighting. And maybe try toggling the flash on or off. The App uses whatever settings you have set for the camera at that time. So if the flash is turned on for your camera, then the App will use the flash to take pictures as well. Basically you just have to play with the camera settings until the app reads the picture correctly.. Good Luck all!

  • I can't activate my banks mobile banking app on my iPhone 4S

    I can't activate my banks mobile banking app on my iPhone 4S. No one else with the same phone has this issue. Cookies are enabled and so is java. What am I missing?

    https://discussions.apple.com/message/18313601#18313601
    This is fantastic. Unfortunately didnt work for my phone, but definitely worth a try!

  • Banking apps won't work in mavericks 10.9.1 on mackbook air

    banking apps won't work in mavericks 10.9.1 on mackbook air

    Welcome to Apple Discussions
    This is more a function of your bank and it's decision to use some non-standard Windows programing than it is an issue with your MBA.
    If you are talking about accessing a financial site through Safari you could try using Firefox. Sometimes Firefox plays better on a Windows WYSIWYG written web page than Safari. A second workaround (but by no means a desirable one) would be to run Windows under emulation or Bootcamp. This means you have to obtain a legitimate copy of Windows OS.

  • Cant find my bank apps.

    I can't find to download, my banks' apps (Guaranty Trust Bank or Diamond Bank) in the BlackBerry app world.
    Solved!
    Go to Solution.

    Hello,
    It's up to the app developer to choose what platforms and OS levels they support, and further whether or not to vend via BB World. So, your question is better directed to them, for it's they who control the situation.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Battery issue -- app issue

    I got a battery issue with my iphone5 two weeks ago, that it will cut off when the battery showing 50% or even more (basically randomly); and the battery cannot display the correct percentage during recharging.  Yesterday I found some apps cannot open but stuck in the loading page. They were weibo, qq, yy, chase (bank app).  This issue continues for today even after I have repaired the battery and update to ios7.  Updating the apps doesn't work.

    ooCast wrote:
    ... Yesterday I found some apps cannot open but stuck in the loading page.
    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... (But can take Longer..)
    Release the Buttons...
    ooCast wrote:
    I got a battery issue with my iphone5 two weeks ago, that it will cut off when the battery showing 50% or even more (basically randomly); and the battery cannot display the correct percentage during recharging. 
    Connect to iTunes on the computer you usually Sync with and Restore...
    http://support.apple.com/kb/HT1414
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download

  • RBC Banking App

    I am a Canadian resident in UK using a Z10 on the T-Mobile UK network. I tried to download the new RBC Banking App from BWorld but it says not available for this device. Why? Its advertised as available for all BB10 devices.

    Good day
    Welcome to BB forums
    I see here there is app for BlackBerry but there isn't one for 10. What I would do is contact their support and ask them when they'll be coming out with version for 10 OS I did this for my Bank( TD CANADA TRUST).
    Good Luck
    Want to contract me? You can follow me on Twitter @RobGambino
    Be sure to click Like! for those who have helped you.
    Click Accept as Solution for posts that have solved your issue(s)!

  • Nationwide banking app is unreliable on Z3

    I've been using the Nationwide banking app in the UK for a while now.  I was originally using it on a Samsung S3 and the app was working fine.  Since upgrading to a Z3 I've noticed several issues with the app. The quick balance function just hangs, attempting to use the money transfer option crashes the app, and generally the UI is very unresponsive and laggy. I contacted Nationwide and after confirming I had the latest version of the app, rebooted the phone, etc. all the usual things, they suggested it might be specific to the Z3 phone software.  I updated to the latest Lollipop version yesterday but the problems still persist. Has anyone else had the same issues?  Any tips for me to debug the issue to find out where the problem lies? 

    Thanks - I didn't know there was a safe mode .  Having just looked up how to enable it though, it appears to disable all 3rd party apps - does that include those installed from the Play store?  If yes, then I won't be able to run the Nationwide app in safemode.

  • Banking app lock up

    I recently got locked out on my pad and finally got my apps back, except one my banks app it will not come in and work, I get to the first page and click and a black box pops up and that is as far as I can go.  Any ideas on what I should do next?  I have contacted the bank and walked through all that they knew to do.  Next step take back to store or to bank for them to see.

    Hello 3hoots,
    It sounds like you have an app that is not functioning correctly. I recommend the troubleshooting from the article named:
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/ts1702
    Start with these steps. There are additional steps in the article if you need them.
    Restart the app
    Close the app and open it again.
    Restart your device
    Turn the device off and on.
    Update your device software and your apps
    Update your device to the latest version of iOS.
    Update your apps:
    Open the App Store and tap Updates.
    If updates are available, tap Update All.
    If asked, enter your Apple ID password. The updates will download and install.
    You might need a Wi-Fi connection to update some apps.
    Install another app from the App Store
    If your installed app won't open, download and install a free app that isn't on your iOS device. This should reset your Apple ID authorization.
    Remember to use the same Apple ID that you used to download the app that you're having issues with.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • I live in South Africa but i'm currently on holiday in the Uk. I'm trying to update my apps but it keeps telling me, "i'm not registered in the South African store" and i wont let me update apps - like my banking app which is necessary at the moment.

    I live in South Africa but i'm currently on holiday in the Uk. I'm trying to update my apps but it keeps telling me, "i'm not registered in the South African store" and i wont let me update apps - like my banking app which is necessary at the moment. Please Help?

    Change iTunes Store Country on an iDevice
    1. Tap Settings;
    2. Tap iTunes & App Stores;
    3. Tap View Apple ID;
    4. Enter your user name and password;
    5. Tap Country/Region;
    6. Tap Change Country/Region;
    7. Select the region where you will be located;
    8. Tap Done.
    Also, see How to Change Your iTunes Store Account Location | eHow.com.

  • I am trying to do a check deposit on my bank app and I had previously disallowed access to the camera.  How do I allow access now?

    I am trying to do a check deposit on my bank app and had previously disallowed camera access.
    How do I now allow access?

    There are two places where camera access can be changed:
    Settings - Privacy - Camera - <your app>
    Settings - <your app> - Camera

  • Office Web Apps Issue - "Sorry, something went wrong" message when opening a document (any MS docx,ppt etc) in IE. With Chrome, it pops (Microsoft Office needs your permission) message and on RUN, it opens the document.

    When opening any Microsoft documents ( docx, ppt etc) in SharePoint 2013,
    Internet Explorer behavior : "Sorry, something went wrong" An unexpected error has occurred message and then nothing happens. 
    In Chrome : Pops (Microsoft Office needs your permission) message and on clicking RUN, it opens the document.
    In Firefox : the documents opens, after asking which application do you want to use to open it.
    The feature (Open Documents in Client Applications by Default) is not activate.
    Why the MS documents are not working in IE 10?

    Hi,
    According to your post, my understanding is that you failed to open Microsoft documents in SharePoint 2013.
    I recommend to Run the following PowerShell in OWA Server :
    Remove-OfficeWebAppsHost # To Remove any restriction
    Or
    New-OfficeWebAppsHost -Domain <String> # To allow specific domain Name
    In addition, you can allow OAuth via HTTP using the following commands:
    $config = (Get-SPSecurityTokenServiceConfig)
    $config.AllowOAuthOverHttp = $true
    $config.Update()
    Here are two similar articles for you to take a look at:
    http://blogs.msdn.com/b/fabdulwahab/archive/2013/10/30/office-web-apps-with-sharepoint-2013-issues.aspx
    http://stevemannspath.blogspot.in/2013/03/sharepoint-2013-office-web-apps-issue.html
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • Am facing Apps issue in iphone 5, while opening it, its asking for apple ID, after entering apple ID also, it is not opening.

    Am facing Apps issue in iphone 5, while opening it, its asking for apple ID, after entering my apple ID also it is not opening.

    Please let me know the how to rectify it, Am still facing issues in opening Apps in iphone 5. :-(

  • I have a Mobile banking app that keeps telling me that I have timed out do to inactivity. How can I fix this so I can use the app again?

    I have a Mobile banking app that keeps telling me that I have timed out do to inactivity. How can I fix this so I can use the app again?

    - double tap your home button
    - swipe to the banking app you have then slide that app up to close it
    - select the home screen window
    Now try and open up your banking app.

Maybe you are looking for

  • Java Communications API and Java SDK 1.4.2

    I just installed the Java Communications API 2.0 on my Windows XP system, with JDK 1.4.2. As per the install instructions, I copied files from the zip into my /lib and /bin directories and set the classpath. However, when I attempt to compile any of

  • Change to SCORM 1.2 Menu in Captivate 8 HTML5 Course Uploads

    I'm working on creating a structure in our Learning Environment that will work on a Samsung SM-T530NU Tablet and one of my concerns are the size of the left hand menu as shown below. We user Meridian as our LMS Provider. My first thought is Meridian

  • Intermittently shuts down, then slowly gets worse - Satellite P30-133

    Hi Since I purchased this laptop in May 2005 it always had a sudden shut down problem and I am always on Mains! I did set it as High Power and keep the CPU at 3/4 as well - this way the Fans are working better and the CPU does not overheat. That was

  • A new, free, open source as3 development tool

    Hi All, I have been a Java developer for years and came to know ActionScript this year. Can't afford the flex builder, and since I am familiar with eclipse, I can not get used to the free FlashDevelop. So I build a new eclipse plugin to work with Act

  • Is there a way to actually paint UV seams in 3D mode?

    I can't for the life of me get my UV edges to fill in.  There really should be a UV overdraw or bleed setting. I posted a bit about this earlier but only got a response from 1 guy who knew what I meant.  Surely there are more with this problem?