Usage of external LDAP server with Portal
Hi All,
We are in a situation to use external LDAP server with WLP 8.1. These are the
constraints we have to deal with:
1. Only read is allowed from this LDAP server.
2. This would be used for authentication purpose
If thats the case, how can we use Visitor Entitlements/Delegated Admin and Group
creation using Portal Admin tool since this will write to the configured LDAP
server.
Can somebody answer my question:
1. Can we use external LDAP server - just for authetication (I know this is possible
by using JAAS LoginModule, but I just want to get confirmed on this ) and
2. Use default and embedded LDAP server for all others like Group/Visitor Entitlements/DAs.
Any relevant pointers are also welcome.
TIA,
Prashanth Bhat.
Thanks for th ereply. Some of your answers are not clear. Can you pls eloborate
on this?? Pls see my comments below.
"Johnson" <[email protected]> wrote:
>
Phil,
Can I use embedded LDAP for production?
Thanks
Lawrence
"Phil Griffin" <BEA> wrote:
"Prashanth " <[email protected]> wrote in message
news:[email protected]..
Hi All,
We are in a situation to use external LDAP server with WLP 8.1. Theseare
the
constraints we have to deal with:
1. Only read is allowed from this LDAP server.
2. This would be used for authentication purpose
If thats the case, how can we use Visitor Entitlements/Delegated Adminand
Group
creation using Portal Admin tool since this will write to the configuredLDAP
server.
Can somebody answer my question:
1. Can we use external LDAP server - just for authetication (I knowthis
is possible
by using JAAS LoginModule, but I just want to get confirmed on this) and
>
You can add the external LDAP server just for authentication, but in
versions through
8.1 SP2 WLP will want to verify the user exists (via the UserReaderMBean)
during
the login process (this check has been removed in SP3). A work around
is to
duplicate
the user in a provider that does impl UserReaderMBean.
Prashanth : You mean to say we have to duplicate the User in embedded LDAP server
also??
>>
2. Use default and embedded LDAP server for all others like Group/VisitorEntitlements/DAs.
>
Yes, the default/embedded LDAP can still be used for DA/visitor
entitlements. In the current
release, the Portal Admin Tools can only be configured to use a single
authentication provider
while forming entitlements. In SP3, all configured providers are
listed/usable by the tools.Prashanth : How can we configure Portal Admin tool to use authentication provider
for entitlements??
>>
Any relevant pointers are also welcome.
TIA,
Prashanth Bhat.
Similar Messages
-
Use of external LDAP server in Weblogic Commerce Server
I'm using the following software:
Iplanet Directory Server v5
Weblogic Application Server v6
Weblogic Commerce v3.5
I need to configure Weblogic Commerce Server to use Iplanet Directory Server directory
services. How do I do that?
I have a couple of questions related to this:
1) As Weblogic Commerce Server runs on top of Weblogic v6, does it mean that to
use an external LDAP server, I need to configure weblogic v6 to do that and not
Weblogic Commerce Server?
2) Whatever may be the case above, how do I do that?
3) config.xml (weblogic application server v6) contains information that needs
to be modified to point to an external JNDI source provider but what information
do I need to modify?
I'd really appreciate if someone can help me out here. Thanks!"JP" <[email protected]> wrote in message news:[email protected]..
Hi,
I'm looking for someone who has used the Lotus LDAP server for WLP7
authentication.
I connect my portal to the Domino LDAP, User and Groups are working
fine, but the membership of a user to a group is not.
I assume that it's related to the parameters I use (especially the
membership.filter ?):
"user.filter=(&(uid=%u)(objectclass=person));
user.dn=O=Apac;
membership.filter=(&(uniquemember=%M)(objectclass=groupOfNames));
group.filter=(&(cn=%g)(objectclass=groupOfNames));
server.host=jpgal01.apac.bea.com;
group.dn="
Any help would be appreciate, because I just don't where to look for.
Try setting the com.netscape.ldap.trace property.
\* When -D command line option is used, defining the property with
* no value will send the trace output to the standard error. If the
* value is defined, it is assumed to be the name of an output file.
* If the file name is prefixed with a '+' character, the file is
* opened in append mode.
This will create a ldap trace file of the requests that WLS is making on the
LDAP server. You can then see
where the filters are not returning the correct value for the group
membership. -
External LDAP + Roles in portal
Folks,
I use weblogic 8.1 portal.
Can we use an external LDAP for storing portal roles? If so, what is supported,
recommended, etc. Does BEA have a recommendation/document on how to support an
environment with multiple domains that share a common LDAP so that we don’t have
to keep them all sync.
Thanks
- LaraLara,
The WLS SSPI (plug-in provider architecture) allows you to add additional
role mappers, however the WLS out-of-the-box authorizer and role mapper are
still required for WLP. Also, in a WLS domain/cluster each managed server
has a copy of the LDAP which is automatically kept in sync by the admin
server.
-Phil
"Lara Man" <[email protected]> wrote in message
news:3f78852c$[email protected]..
>
Folks,
I use weblogic 8.1 portal.
Can we use an external LDAP for storing portal roles? If so, what issupported,
recommended, etc. Does BEA have a recommendation/document on how tosupport an
environment with multiple domains that share a common LDAP so that wedon't have
to keep them all sync.
Thanks
- Lara -
How to configaration in LDAP Server in portal?
Hi Experts,
I configare the LDAP Server in portal , but is not configare plz send me docs
Regards,
ChanduHi Check this out.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/setting%2bup%2ban%2bldap%2bfor%2bthe%2bportal
Have a look at these BLOGS which tells you step step by approach to integrate LDAP with SAP EP.
Novell eDirectory 8.8 as UME Data Source for EP : Part I
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2937. [original link is broken]
UME Data Source: LDAP
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/setting%2bup%2ban%2bldap%2bfor%2bthe%2bportal
Windows Integrated Authentication via Kerberos on an LDAP data source -
NTLM with LDAP
Browse these links.
UME Data Source: LDAP
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/setting%2bup%2ban%2bldap%2bfor%2bthe%2bportal
Check these:
https://wiki.sdn.sap.com/wiki/display/HOME/ConfigureLDAPand+EP
http://help.sap.com/saphelp_nw04/helpdata/en/cc/cdd93f130f9115e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/48/d1d13f7fb44c21e10000000a1550b0/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e1959b90-0201-0010-849c-d2b1d574768b
You can refer to the following weblinks for the same
HELP.SAP.COM
http://help.sap.com/saphelp_nw70/helpdata/EN/4e/4d0d40c04af72ee10000000a1550b0/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e1959b90-0201-0010-849c-d2b1d574768b
FORUMS
LDAP Server settings for Configuring Multiple LDAP in Portal UME.
LDAP Configuration - Multiple domains
EP7 - Multiple LDAP sample file
SAP Note
736471 UME Configuration of multiple LDAP data sources -
Error in authentication with ldap server with certificate
Hi,
i have a problem in authentication with ldap server with certificate.
here i am using java API to authenticate.
Caused by: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path validation failed: java.security.cert.CertPathValidatorException: timestamp check failed.
I issued the new certificate which is having the up to 5 years valid time.
is java will authenticate up to one year only?
Can any body help on this issue...
Regards
Rangasorry i am gettting ythe same error
javax.naming.CommunicationException: simple bind failed: servername:636 exception is javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path validation failed: java.security.cert.CertPathValidatorException: timestamp check failed]
here when i am using the old certificate and changing the system date means i can get the authentication.
can you tell where we can concentrate and solve the issue..
where is the issue
1. need to check with the ldap server only
2. problem in java code only.
thanks in advance -
How to integrate File Server with Portal??
Hi all,
can any one tell me that how interegate the File Server With Portal Server??
In my portal server under home tab i have sub tab (second level navigation) of File server.Whe i click this tab it throws an syntax error
ie
System Error
An exception occurred during the program execution. Below you will find technical information pertaining to this exception that you might want to forward to your system administrator.
Exception Class :: class com.sapportals.wcm.repository.NotSupportedException
Exception Message :: Not Implemented
thease are the steps that i have taken
>created HTTP System..
>created WebDAV Repository.
>Created Cache.
>Created KM WebDAV System.
>Created Iview and in iview i have to specify the <b>Path to Initially Displayed Folder</b>
i have specified the folder of file server that i want to display..
but i get the same syntax error ..
infact i dint get that folder in KM.
But when i specify the folder that is present in KM its Work fine..
Now the Scnerio According to me is that File server is not integrated properly
if it would be integrated properly i would be able to see the folder of File server in KM...
am i correct ??
please Guide me to integrated the File Server Properly??
Points will be given for any help..
Regards
VinitHi Vinit,
if you want some Windows File Server integrated into Portal, please do not use a WebDAV Repository, but use the File System Repository instead. Therefore you need to configure the according Repository Manager. Please refer to this documentation:
<a href="http://help.sap.com/saphelp_nw70/helpdata/en/ed/b334ea02a2704388d1d2fc3e4298ad/frameset.htm">Integrating Documents from a Windows System into KM</a>
HTH,
Carsten -
Hello.
Is it possible to configure WebLogic to use external LDAP server, which in turn is "built in" in other WebLogic (at other physical machine)?
And if it is possible, can I use OracleInternetDirectoryAuthenticator provider for this?
(sorry for my english)Hi
OID is all together a different LDAP provider.
You can try to create a Authenticator of type LDAPAuthenticator and accordingly provide the configurations.
Check the below note.
http://docs.oracle.com/cd/E17904_01/web.1111/e13707/atn.htm#i1199007 -
Authentication problem by external ldap server for WLS 7.0
Hi all,
I have configured iPlanet directory Server to serve as authentication security
provider for WLS 7.0.While doing so I have created a Test security realm and made
it as default.I have also configured the other default settings for the remaining
security providers for the realm.
Now, while I start the WLS with the default username and password, boot-error
comes as given below. As a matter of fact I have also created groups with relevant
username and pwd in the ldap server as specified bu the Bea documentation.
I have tried to remove the problem since last 4 days but all in fiasco.
If anybody has any pointer to the problem - it will be a great help.
The error :
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://[hostname]:[port]/console *
D:\bea\weblogic700\samples\server\config\petstore>"D:\bea\jdk131_03\bin\java"
-h
otspot -Xms32m -Xmx200m -Dpet.mode= - Dweblogic.management.discover=false -Dweblo
gic.Name=petstoreServer -Dbea.home="D:\bea" -Dweblogic.management.username=weblo
gic -Dweblogic.management.password=weblogic -Dweblogic.ProductionModeEnabled=tru
e -Djava.security.manager -Djava.security.policy=="D:\bea\weblogic700\server\lib
\weblogic.policy" weblogic.Server
Starting WebLogic Server...
<Nov 19, 2002 10:08:04 AM IST> <Notice> <Management> <140005> <Loading configura
tion D:\bea\weblogic700\samples\server\config\petstore\.\config.xml>
<Nov 19, 2002 10:08:21 AM IST> <Notice> <Security> <090082> <Security initializi
ng using realm RitTestRealm.>
<Nov 19, 2002 10:08:22 AM IST> <Critical> <WebLogicServer> <000364> <Server fail
ed during initialization. Exception:java.lang.SecurityException: User weblogic
i
s not permitted to boot the server
java.lang.SecurityException: User weblogic is not permitted to boot the server
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:1076)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1116)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)
>
Regards,
RitwikThanks Vijay - it has worked by creating the Administrator group in LDAP but Weblogic
documentation also states the creation of any group in Ldap server with the boot
username and pwd and then adding the group in the admin role of WLS7.0 - but this
did not work.
If there is any info regarding the same - pl. do let me know
Regards,
Ritwik
"Vijay" <[email protected]> wrote:
>
Ritwik,
I think WebLogic 7 requires a group called "Administrators" in the LDAP
server
and requires an user to be added to that group. I have this working in
one of
my projects. The group really doesnt need to be an LDAP administrative
group.
Can you provide any additional information. I might be able to help since
I got
this working only a coupla days back.
Vijay
"Ritwik Batabyal" <[email protected]> wrote:
Hi all,
I have configured iPlanet directory Server to serve as authentication
security
provider for WLS 7.0.While doing so I have created a Test security realm
and made
it as default.I have also configured the other default settings forthe
remaining
security providers for the realm.
Now, while I start the WLS with the default username and password, boot-error
comes as given below. As a matter of fact I have also created groups
with relevant
username and pwd in the ldap server as specified bu the Bea documentation.
I have tried to remove the problem since last 4 days but all in fiasco.
If anybody has any pointer to the problem - it will be a great help.
The error :
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://[hostname]:[port]/console *
D:\bea\weblogic700\samples\server\config\petstore>"D:\bea\jdk131_03\bin\java"
-h
otspot -Xms32m -Xmx200m -Dpet.mode= - Dweblogic.management.discover=false
-Dweblo
gic.Name=petstoreServer -Dbea.home="D:\bea" -Dweblogic.management.username=weblo
gic -Dweblogic.management.password=weblogic -Dweblogic.ProductionModeEnabled=tru
e -Djava.security.manager -Djava.security.policy=="D:\bea\weblogic700\server\lib
\weblogic.policy" weblogic.Server
Starting WebLogic Server...
<Nov 19, 2002 10:08:04 AM IST> <Notice> <Management> <140005> <Loading
configura
tion D:\bea\weblogic700\samples\server\config\petstore\.\config.xml>
<Nov 19, 2002 10:08:21 AM IST> <Notice> <Security> <090082> <Security
initializi
ng using realm RitTestRealm.>
<Nov 19, 2002 10:08:22 AM IST> <Critical> <WebLogicServer> <000364><Server
fail
ed during initialization. Exception:java.lang.SecurityException: User
weblogic
i
s not permitted to boot the server
java.lang.SecurityException: User weblogic is not permitted to bootthe
server
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:1076)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1116)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)
>
Regards,
Ritwik -
Using external LDAP server for WL JNDI lookups
I'm trying to find out if it is possible to re-direct JNDI calls to the WL
server to an external LDAP server. I know you can install an external LDAP
server for security purposes, but I would like to use an external LDAP
server to handle all JNDI lookups (like for JNDI EJB name location, etc.).
Is this possible?You typically need to use our JNDI store. We strongly recommend this for
performance reasons..
You can use the JNDI To LDAP bridge which is available from the sun web
site.
Michael Girdley
BEA Systems Inc
"Jack Archer" <[email protected]> wrote in message
news:[email protected]..
I'm trying to find out if it is possible to re-direct JNDI calls to the WL
server to an external LDAP server. I know you can install an external LDAP
server for security purposes, but I would like to use an external LDAP
server to handle all JNDI lookups (like for JNDI EJB name location, etc.).
Is this possible? -
HI
Can any one tell me what is the role of LDAP server in portal
Thanks
shashankHi Shashak,
if you use the LDAP Server as UME User Store, the security policy from the LDAP server is enforced. This means that if the data source has defined its own security policy, there is no standard interface to pass on any error messages received from the data source to the UME user in the same level of detail and in the correct language. The user only receives a very generic error message. Therefore, you would need to adapt the Portal security policy accordingly. You can find some further information under http://help.sap.com/saphelp_nw04/helpdata/en/7f/c52442ad9f5133e10000000a155106/frameset.htm.
More general information on LDAP integration you can find under http://help.sap.com/saphelp_nw04/helpdata/en/3b/68ff407765ed6fe10000000a1550b0/frameset.htm.
Best regards,
Joerg -
Any Way to test Integration of File Server with Portal??
Hi all,
I want to integrate File Server with my Portal so that my Application and Data remains seperated.
I have integrated File Server but i am not able to find the Folder of file server in KM.
i have create KM Navigation Iview When i specify any folder that is available in KM it works fine but i can not see the folder of file server...
<b>Is there any test with which i can check that weather my File Server is Integrated properly with my Portal or not?? </b>
Any help will be highly Appretiated ...
its very Urgent!!
Thanks in Advance
VinitHi,
I think already file system repository created in the portal. plz check it
Goto >System Admin>System Config>KM>Content management>Repositories manager>File system Repository. or create a new repository..
You can use File System Repository so that you can integrate ur file server with portal. Refer this link
http://help.sap.com/saphelp_nw04/helpdata/en/e3/92322ab24e11d5993800508b6b8b11/frameset.htm
Regards,
Senthil K. -
Integrate Sun ONE Messaging and Sun ONE Calendar server with Portal 6.0
We need to integrate (implement a Single Sign On solution) Sun ONE/iPlanet Messaging and Calendar servers with Portal 6.0. The Msg and Cal. servers do not use Portal Profile server as their DS and have a different DS.This directory server is the external DS for Portal. After users login to Portal, they should be able to access Msg and Cal. servers without login to them again.
1. How do we do this without writing a java code/servlet ?
2. Is there any way that we could configure DSAME to create the URL,add userID and password to it and forward that URL to above servers ?Hi,
The SunOne communication providers for version 6.0 will be released soon.
(you can get beta versions from early access program)
Like in the portal version 3.0 these channels
are enabling SSO for messaging and calendar servers.
(I tested them with iMSG5.2 and Calendar5.1.1)
Cheers,
Alex :-) -
Integrating weblogic server with portal
Hi Friends,
Can any one tell me the procedure how to Integrate application server like weblogic with portal.
ThanksHi Venigalla,
FPN is the solution!
Setting up a federated portal network is comparable to connecting your portal to a u201Cnormalu201D backend system. The steps of configuring a FPN in a nutshell are:
-->Setting proxy settings
-->Creating trust / single sign-on between portals in the federation
-->Creating a producer system on the consumer portal
Depending on your overall portal landscape the complexity of configuration steps might vary.
Kindly go through the guides (PDF documents) in the links below:
1. How to set up Landscape for Federated Portal Network:
Content Sharing in SAP NetWeaver Portal
2. SAP NetWeaver Portal WSRP Support:
Content Sharing in SAP NetWeaver Portal
3. Activities for Implementing Federated Portal Network - Step by Step (Blog):
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70191d1e-2bd1-2a10-d9b7-ba19500da527
4. SDN page on WSRP Application Sharing:
/docs/DOC-8384#section6
5. SDN page on Configuring a Federated Portal Network:
Configuring a Federated Portal Network
These links provide all information on FPN.
Hope it helps you.
Regards,
Anagha -
Getting error on console after configuring MS SQL DB server with portal
Hi,
I am using WebLogic portal 10.2. I have configured MS SQL server with this portal as mentioned in:
http://edocs.beasys.com/wlp/docs102/db/SQL.html
After successfully performing all the steps mentioned in above link, when i try to start WebLogic Portal
server i get following error on console:
<Mar 17, 2009 2:00:31 PM GMT+05:30> <Notice> <Log Management> <BEA-170019> <The server log file C:\bea\wlserver_10.0\samples\domains\portal\servers\portalServer\logs\portalServer.log is opened. All server side log events will be written to this file.>
<Mar 17, 2009 2:00:39 PM GMT+05:30> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Mar 17, 2009 2:00:39 PM GMT+05:30> <Error> <Security> <BEA-000000> <[Security:090759]A SQLException occurred while retrieving password information
java.sql.SQLException: [BEA][SQLServer JDBC Driver][SQLServer]Invalid object name 'USERS'.
at weblogic.jdbc.base.BaseExceptions.createException(Unknown Source)
at weblogic.jdbc.base.BaseExceptions.getException(Unknown Source)
at weblogic.jdbc.sqlserver.tds.TDSRequest.processErrorToken(Unknown Source)
at weblogic.jdbc.sqlserver.tds.TDSRequest.processReplyToken(Unknown Source)
at weblogic.jdbc.sqlserver.tds.TDSRPCRequest.processReplyToken(Unknown Source)
Truncated. see log file for complete stacktrace
>
<Mar 17, 2009 2:00:39 PM GMT+05:30> <Critical> <Security> <BEA-090402> <Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please e
dit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.>
<Mar 17, 2009 2:00:39 PM GMT+05:30> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid.
The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the bo
ot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(Unknown Source)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(Unknown Source)
at weblogic.security.service.SecurityServiceManager.initialize(Unknown Source)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
>
<Mar 17, 2009 2:00:39 PM GMT+05:30> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Mar 17, 2009 2:00:39 PM GMT+05:30> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Mar 17, 2009 2:00:39 PM GMT+05:30> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
Autonomy server stopped.
and server could not proceed further.
How can we resolve above error?Hi,
I have re-installed WebLogic Portal 10.2 and now i m trying to configure MS SQL server.
When i use configuration wizard tool, i could successfully run database scripts and i could see table being created in database. But when wizard reaches its last screen and installation completes about 75%, wizard screen shows following error:
Traceback (innermost last):
File "<iostream>", line 14, in ?
File "C:\Documents and Settings\Administrator\Local Settings\Temp\1\WLSTOfflineIni55090.py", line 118, in create
com.bea.plateng.domain.script.jython.WLSTException: com.bea.plateng.domain.script.ScriptException: com.bea.plateng.domain.ValidateException: Property "Name" of SAMLCredentialMapperV2 with original name "Provider" is invalid. The property value is duplicated.
at com.bea.plateng.domain.script.jython.CommandExceptionHandler.handleException(CommandExceptionHandler.java:51)
at com.bea.plateng.domain.script.jython.WLScriptContext.handleException(WLScriptContext.java:1468)
at com.bea.plateng.domain.script.jython.WLScriptContext.create(WLScriptContext.java:732)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:160)
at org.python.core.PyMethod.__call__(PyMethod.java:96)
at org.python.core.PyObject.__call__(PyObject.java:248)
at org.python.core.PyObject.invoke(PyObject.java:2016)
at org.python.pycode._pyx319.create$29(C:\Documents and Settings\Administrator\Local Settings\Temp\1\WLSTOfflineIni55090.py:118)
at org.python.pycode._pyx319.call_function(C:\Documents and Settings\Administrator\Local Settings\Temp\1\WLSTOfflineIni55090.py)
at org.python.core.PyTableCode.call(PyTableCode.java:208)
at org.python.core.PyTableCode.call(PyTableCode.java:293)
at org.python.core.PyFunction.__call__(PyFunction.java:179)
at org.python.pycode._pyx322.f$0(<iostream>:14)
at org.python.pycode._pyx322.call_function(<iostream>)
at org.python.core.PyTableCode.call(PyTableCode.java:208)
at org.python.core.PyCode.call(PyCode.java:14)
at org.python.core.Py.runCode(Py.java:1135)
at org.python.util.PythonInterpreter.execfile(PythonInterpreter.java:167)
at org.python.util.PythonInterpreter.execfile(PythonInterpreter.java:162)
at com.bea.plateng.domain.DomainChecker.executeEmbeddedScript(DomainChecker.java:911)
at com.bea.plateng.domain.DomainChecker.runCustomWLSTScript(DomainChecker.java:878)
at com.bea.plateng.domain.DomainChecker.preprocessOutput(DomainChecker.java:135)
at com.bea.plateng.domain.TemplateImporter.generate(TemplateImporter.java:248)
at com.bea.plateng.wizard.domain.gui.tasks.DomainCreationGUITask$1.run(DomainCreationGUITask.java:232)
Caused by: com.bea.plateng.domain.script.ScriptException: com.bea.plateng.domain.ValidateException: Property "Name" of SAMLCredentialMapperV2 with original name "Provider" is invalid. The property value is duplicated.
at com.bea.plateng.domain.script.ScriptExecutor.create4SubTypeObject(ScriptExecutor.java:955)
at com.bea.plateng.domain.script.jython.ScriptProxyFactory.deepCreateProxy4SubTypeObject(ScriptProxyFactory.java:128)
at com.bea.plateng.domain.script.jython.WLScriptContext.create(WLScriptContext.java:728)
... 25 more
Caused by: com.bea.plateng.domain.ValidateException: Property "Name" of SAMLCredentialMapperV2 with original name "Provider" is invalid. The property value is duplicated.
at com.bea.plateng.domain.aspect.XBeanConfigAspect.selfValidate(XBeanConfigAspect.java:630)
at com.bea.plateng.domain.aspect.AbstractConfigAspect.validate(AbstractConfigAspect.java:1130)
at com.bea.plateng.domain.aspect.AbstractConfigAspect.selfSetValue(AbstractConfigAspect.java:1615)
at com.bea.plateng.domain.aspect.AbstractConfigAspect.setValueInternal(AbstractConfigAspect.java:1574)
at com.bea.plateng.domain.aspect.AbstractConfigAspect.setValue(AbstractConfigAspect.java:748)
at com.bea.plateng.domain.aspect.AbstractConfigAspect.setValue(AbstractConfigAspect.java:757)
at com.bea.plateng.domain.operation.HTableEditOperation.createSimpleConfigAspects(HTableEditOperation.java:265)
at com.bea.plateng.domain.script.ScriptExecutor.create4SubTypeObject(ScriptExecutor.java:930)
... 27 more
Caused by: java.beans.PropertyVetoException: The property value is duplicated.
at com.bea.plateng.domain.event.aspect.UniqueValueValidateListener.valueChanged(UniqueValueValidateListener.java:127)
at com.bea.plateng.domain.event.aspect.ConfigAspectValueListener.vetoableChange(ConfigAspectValueListener.java:138)
at com.bea.plateng.common.comdev.MVetoableChangeSupport.fireVetoableChange(MVetoableChangeSupport.java:189)
at com.bea.plateng.common.comdev.MVetoableChangeSupport.fireVetoableChange(MVetoableChangeSupport.java:156)
at com.bea.plateng.common.comdev.MVetoableChangeSupport.fireVetoableChange(MVetoableChangeSupport.java:139)
at com.bea.plateng.domain.aspect.XBeanConfigAspect.selfValidate(XBeanConfigAspect.java:620)
... 34 more
com.bea.plateng.domain.script.jython.WLSTException: com.bea.plateng.domain.script.jython.WLSTException: com.bea.plateng.domain.script.ScriptException: com.bea.plateng.domain.ValidateException: Property "Name" of SAMLCredentialMapperV2 with original name "Provider" is invalid. The property value is duplicated.
at org.python.core.Py.JavaError(Py.java:324)
at org.python.core.Py.JavaError(Py.java:311)
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:163)
at org.python.core.PyMethod.__call__(PyMethod.java:96)
at org.python.core.PyObject.__call__(PyObject.java:248)
at org.python.core.PyObject.invoke(PyObject.java:2016)
at org.python.pycode._pyx319.create$29(C:\Documents and Settings\Administrator\Local Settings\Temp\1\WLSTOfflineIni55090.py:118)
at org.python.pycode._pyx319.call_function(C:\Documents and Settings\Administrator\Local Settings\Temp\1\WLSTOfflineIni55090.py)
at org.python.core.PyTableCode.call(PyTableCode.java:208)
at org.python.core.PyTableCode.call(PyTableCode.java:293)
at org.python.core.PyFunction.__call__(PyFunction.java:179)
at org.python.pycode._pyx322.f$0(<iostream>:14)
at org.python.pycode._pyx322.call_function(<iostream>)
at org.python.core.PyTableCode.call(PyTableCode.java:208)
at org.python.core.PyCode.call(PyCode.java:14)
at org.python.core.Py.runCode(Py.java:1135)
at org.python.util.PythonInterpreter.execfile(PythonInterpreter.java:167)
at org.python.util.PythonInterpreter.execfile(PythonInterpreter.java:162)
at com.bea.plateng.domain.DomainChecker.executeEmbeddedScript(DomainChecker.java:911)
at com.bea.plateng.domain.DomainChecker.runCustomWLSTScript(DomainChecker.java:878)
at com.bea.plateng.domain.DomainChecker.preprocessOutput(DomainChecker.java:135)
at com.bea.plateng.domain.TemplateImporter.generate(TemplateImporter.java:248)
at com.bea.plateng.wizard.domain.gui.tasks.DomainCreationGUITask$1.run(DomainCreationGUITask.java:232)
what should i do? -
Settings and usage of external FTP Server in ECC 6.0
Dear all,
I work in ECC 6.0, and I want to configure and use an external FTP Server for upload, download and delete file from FTP Server.
My questions are:
1) Which are steps for configure an FTP connection?
2) How can I read, delete and send a flat file to the FTP Server? Can you send a sample code?
Thanks in advance for your help.
Best Regards,
GiulioPlease check program RSFTP002 is a good example given by SAP .
a®
Maybe you are looking for
-
Error while creating index on ordDoc
Hello, I have an application that use intermedia documents. We have created an index based on stored procedure and a USER_DATASTORE. This was working perfectly with oracle 9i. We migrated from 9i to 10g, and are trying to make in work. Little modific
-
ha e been trying to get my favorites moved from internet explorer. I'm being told it's done, but I cannot find the place they have been stored.
-
HT4864 "Note: If you receive errors using SSL, try using TLS instead."
My outgoing mail server works with .me when I enable TLS, but not SSL, any security issues?
-
Can users edit Library items?
Hi everyone. I'm almost done with my first Contribute site and I had a question. My client has a small piece of text that is shown in the header of every page and this text is something that they want to change regularly. I added a Library item for t
-
MDT 2012 Windows 7 Deployment Stops At User Account and Computer Name Setup Page
I was given a sysprepped custom Windows 7 WIM image that was set up by a third party that didn't use MDT to create the WIM. I created a task sequence to deploy it, but it never finishes. After the OS installs and it reboots, it comes up to the white