Usage of tranfer global settings
Hi,
Some of units of measure are not avialable in BI but available in R/3, because of this we are getting erroneous records & then available in error stack. Now i want to use transfer global settings option to get unavialable units. So if i use transfter global settings option under rsa1->source system, "will it affects already existing setting in BI". Any suggestions..
Regds,
Bhadri
Hi Bhadri,
Being BW developer you will not have authorization to insert/update the entries in standard tables like T006, TCURR etc. These activities are generally performed by either service management team or basis team which comprises functional people as well.
Now in your case you can either request respective teams to add the UNIT entries in the concerned table or replicate the settings from R/3 to BW.
Hope this helps you in resolving your issue.
Regards,
Yogesh.
Similar Messages
-
I want to import Global settings from R/3 to BW. How to perform this activity???
Please search the forum before posting a thread
Edited by: Pravender on Aug 27, 2010 8:19 PMHi,
You can use the below approach:
RSA1 --> Source system --> Tranfer Global Settings --> Select the required thing which needs to be replicated like Currencies/Units/ Fiscal year variants cts... And use the Update tables option below which will update the required fields..
or
To automatically bring the update in r/3 to bw you can schedule that 2 program in background job to run periodically. basicaly RSIMPCUST is just same with the 'transfer global setting', it uses the same program. RSIMPCURR is for update currency exchange rate. This will take care of the things automatically.
With this all the necessary units, currencies and other values will update the tables in BW.
Hope this helps..
Murali
Edited by: Murali M on Aug 27, 2010 8:47 AM -
I cant cant cant stand the continual pop ups every single minute of every single ay when I type, e mail or go on FB with annoying pop ups from adobe asking me "print, copy, global settigns, downkoad, link : etc etc etc STOP!!!!!!!! OMG!!! Ihave filed numerous compaints & sent 100s of e mails to NO avail STOP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ill try I\t literally is making me crazy Its BEYOND annoying & so intrusive Its a white pop up windeow at the bottom of my screen as I am typing It says -Print, -copy global- settings downloads, etc
Horrible!!!!!!!!!!!
ila
www.partiesbyila.com
516 204 6742 -
Can't change Flash Player global settings
Hello,
I've had this problem about a year now and have been searching all over the internet for the solution. Ive seen it come up many times but it never fixes my problem, so I decided to just start a thread.
I have:
-Windows 7 Home Premium 64-bit
-Firefox 6.0 64-bit
-Flash Player version 10,3,183,5
Anyways, im sure youve heard of this before where you cannot change the global settings to allow webcam, mic, data storage or click allow and so on - and I have tried many things to no avail. I assume it is some problem with Windows 7 restricting its access and i figured maybe an update could help but it has still been the same for a year. I have two computers both with the same exact problem and I have tried everything suggested for this problem: delete "flash player" folders out of appdata, reinstalling, etc. but nothing has worked. Its been like this for a year and I cant deal with it anymore, any flash video or game that requires flash to store local data typically shows up as a black box or doesn't let me save my game. Please help me, this is extremely irritating.pwillener wrote:
Shadow7821 wrote:
-Firefox 6.0 64-bit
I didn't even know that there was a 64-bit version of Firefox 6 - where did you find it?
Anyway, Flash Player 10.x does not run on 64-bit browsers. So, in that light, how do you attempt to change the Global Settings, from the Control Panel applet, or via http://www.macromedia.com/support/documentation/en/flashplayer/help/se ttings_manager.htm ?
Sorry - I dont really know what firefox came in besides the version and since my computer is 64-bit I asssumed the program was too.
Also sorry for the late reply, Ive been doing school things lately.
Anyways,
Another question: if you delete the Flash Player folders from %appdata%, are they recreated after using Flash Player?
Now that I look at it, I believe so. I just checked my appdata and saw the flash player folders are there, but they are always empty. If there was a recent update it may of been that, but they are there again. Could that have something to do with it? -
When I create a simple proxy service containing only one report task I get the following error:
java.lang.IllegalStateException: com.bea.wli.config.component.NotFoundException: Validation failed for Operations System/Operator Settings/GlobalOperationalSettings: Referenced component (Operations System/Operator Settings/GlobalOperationalSettings) not found.
at com.bea.wli.sb.resources.globaloperations.GlobalOperationsRepository.isDomainReportingEnabled(GlobalOperationsRepository.java:123)
at stages.logging.runtime.ReportRuntimeStep.processMessage(ReportRuntimeStep.java:68)
When I did some research I found out the Global settings of the OSB are not working anymore. When I open that page in the OSB Console I get the same (kind of) error. Futhermore I found out that the file /apps/bea/domains/<MYDOMAIN>/osb/config/core/System/Operator Settings/GlobalOperationalSettings.xml was missing in my domain. But how did this happen?
Placing a copy of this file back does not seem to make any difference. It still cannot find anything.
A thing to notice is I have two OSBs (AdminServers) running on one Linux Machine. Both of them in a different domain with their own oracle XE Database Schema for reporting. One of the OSBs is working and one is not working. But I cannot think of a reason why this would cause a problem.
Does anyone know what to do?Hi there!
Add this to the import.py script
operationMap = alsbImportPlan.getOperations()
# We want to avoid to delete the GlobalOperationalSettings which the JAR packaged using the
# ant tasks seem to automatically do.
# So we go look for the 'System/Operator Settings/GlobalOperationalSettings' reference
# in the operations map
globalOp = findRefInOperationMap(operationMap, 'System/Operator Settings/GlobalOperationalSettings')
if (globalOp != None):
print 'Removing delete operation on the GlobalOperationalSettings'
alsbImportPlan.removeOperation(globalOp)
Just after
# Getting the default import plan from the upload jar file
alsbJarInfo = ALSBConfigurationMBean.getImportJarInfo()
alsbImportPlan = alsbJarInfo.getDefaultImportPlan()
Regards,
Knut -
Transfer of global settings from ECC to APO
I know there is the 'transfer of global settings' option from within transaction RSA1 in APO to transfer units of measure, fiscal year variants etc from ECC to APO, to ensure synchronisation.
How does this actually work? For example, suppose we have 14 units of measure in ECC, but already have 16 units in APO. If we run the synchronisation transaction, what will end up in APO? Is the complete table of units replaced in APO, so we would have just 14 units?
Thanks, Bob Austinthere is some explanation to what you have mentioned in Re: Factory Calendar
this talks about calendars and is relevant till SCM 4.x
I would imagine the situation would be the same for UOM
In SCM 5 you have the option to update the tables, Rebuild the tables and also a simulation option -
Can't see the Global Settings Manager !
Hi,
I can't see the Global Settings Manager here: Adobe - Flash Player : Settings Manager - Website Storage Settings panel
I have a message 'this content requires Flash'.
My OS: Vista Business 32 bits
Flash player installed : 14.0.0.145
Browser: Firefox 31 (latest version)
Let me know how can I fix this issue, please.
Thanks in advance.Hi Pat,
Sorry for the delay time.
I found the culprit, a firefox add-ons that consider the Global Settings Manager as an adv.
May I ask you here another issue that I have with Flash while viewing movies ? -
Resetting all specific user alerts to the global settings
Hello:
I would appreciate any help anyone can offer about this.
A while ago, I set the Action for a specific buddy (a sound notification for a particular 'event') because I wanted them to be different from the global setting on that particular occasion.
Now, I just want notifications for that specific buddy to behave just like all the rest, or in other words, I want to return him back to behaving in accordance with the global settings. I know I can update that particular buddy's settings to be the same as the global settings, but this is a real pain whenever I want to change the global settings, because I have to change those, then go in and change the settings for this buddy also, just to keep it all consistent.
Is there a way in iChat to reset all individual buddies' behavoirs so that they follow the global settings again and stop using the individual settings? I tried turning them off in the individual buddy's Actions, but that just turns off the notifications entirely for that buddy.
Thanks!Umm,
Interesting.
I was thinking that when you did the Get Info on the Buddy (after Highlighting) and went to the Alerts tab that you could set the thing(s) to None.
I know that you can turn Off all the tick boxes.
In fact on this this it seems to be the Answer.
Remove all the Ticks you have in any of the Play Sound boxes.
(you also have to check the top drop down for every action you may have set a Sound against.)
The other way is more "destructive"
Delete com.apple.ichat.plist
This sets all the iChat Preferences Back to Defaults (Font, Font Colour, Incoming overrides, Bubble Colour, Saved Transcripts, Menu Bar icon to list a few as well as any Sound/Alert choices and wiping the Buddy Specials and the Saved Status Messages.
8:16 PM Sunday; December 6, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat" -
Global Settings - 'HTTP 404 - File not found'
Hello
I have some problems with the services-portlet in portal. When I click on the link to 'Global Settings' of the services-portlet a 'HTTP 404 - File not found' exception is displayed.
Additionally I have some problems on accessing the portal with ..../pls/portal. Sometimes it works, sometimes I have to use the direct access URL like ..../pls/portal/url/page/myPageGroup.
Can anybody help?
Thanks
ChrigelHello again
I opened a TAR at metalink and got the help I needed.
Here the reason of this problem:
The Default home page specified in the Global Settings was deleted either through the GUI or directly from the tables, causing this error.
You can get a script from metalink to reset the default home page to Corporate Home page.
Happy Easter!
Chrigel -
Transfer global settings for Fiscal year
Hi friends,
There are two entries are posted for Fiscal year in R/3.. In BW side, I know that replicate transfer global settings is good option to get R/3 data for the Fiscal year.. here there is no fiscal year option.. but there is fiscal year variant options.. i want to know how can i replicate global settings by which option and which mode should use.....
Guide and help me...
with regards,
JayaHi,
I doubt if we have such option for Fiscal variant. I maybe wrong.
But try to get the data for Fiscal Variant in a flat file and load it to BW.
or
Check the the table T009B if the Fisc variant is Updated.
If not, there must be some option for that.
Regards,
Balaji V -
Setting Default Global Settings for Bex Analyzer 7 for all users
We need to set default settings for Bex Analyzer Global Settings when we install SAP-GUI 7.2 in our user's workstations. The current default settings are that all of them are turned off. We would rather not have to run around and change each of our 1,000 user's settings.
Ed:. Apparently [OSS Note 1254112|https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=1254112] discussed how to adjust Windows Registry settings to resolve this.
Edited by: Charles Belt on Apr 28, 2011 10:01 AMJust so any one is looking for the correct solution and it worked for me.
Small correction to the information in the OSS note 1254112.
for setting the legacy version setting use the below string in the registry
"LAUNCH_VERSION" = "LEGACY" insted of "LaunchLegacyVersion"
Kiran -
Slide duration not following global settings - CP4
I'm using Captivate 4 and I've set the global slide duration to 1.5 seconds.
I've recorded an Automatic Recording using the Custom Mode.
When I preview my recordings I discover that all the slide durrations are 4+ seconds.
I've been manually adjusting the slide durration for each recorded slide (very annoying.)
Is there any way to have the slide duration adhere to the global settings?Hi again
So this is a simulation and not a demo?
If so, you need to ensure the Click Boxes are all configured to Go to the next slide when clicked.
If it's just Demonstration, note that an option exists for recording in "real time". What this means is that during the recording process, if you click the Edit menu, wait 20 seconds, then move the mouse down to one of the menu options, Captivate will time the action identically. Perhaps that option is what you are looking for?
If so, click Edit > Preferences > Recording > Settings and enable the option. (I believe it's normally disabled by default)
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks -
Cannot click on global settings
I am trying to watch mlbtv. The video is doing the nasty green/pink disturbance like in the video for Evident Utensil. I have typically associated this "static" with hardware acceleration. When I have disabled hardware acceleration in the past, the problem goes away. However, it appears that I cannot even test my hypothesis this time. I can no longer click on the global settings when I right click on the video. When i click on global settings, it simply opens up an Adobe web page explaining how global settings work. It does not allow me to modify global settings. I have tried to click on global settings now in a multitude of videos, and none actually take me to the global settings, they just open a new tab with the Adobe web page (which is extremely annoying because it tells me to get to the global display settings, all I have to do is right click on the video and proceed). I am getting pretty frustrated. Thanks for reading this.
Hardware Acceleration is part of the local Settings, not Global Settings.
If you need further help, please state your system info. -
Post installation global settings
Hi Gurus,
what are all the global settings required after bi server installation.
Thanks
SriHi,
Please check the links below.
http://www.sap-img.com/business/what-is-spro-in-bw-project.htm
Re: Transaction Codes
/thread/529353 [original link is broken]
SPRO in BI
what is SPRO and what do we do in SPRO
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/472443f2-0c01-0010-20ab-fbd380d45881
http://www.myitgroup.com/upload/BusinessIntelligence/BW35%20Post%20Install%20steps.doc
BI Migration and Upgradation
New Performance Settings and Improvements in 2004s
/thread/529353 [original link is broken]
Regards.
CSM Reddy -
Question to Transferring Global Settings from Source Systems
1) When we do this steps, we found the following information as follows, so the question is that which fields that we should maintain?
BW User ALE
Debugging User
BEx order number
Releasest. hier
Monitor initial
Last IDoc no.
Last IS-Nr.
XPRA executed
Lock Mangr Logs
MD: Sing. Rec. Inst
RFC BI Accelerator
2) If we maintain some of fields should we do something before, and how? e.g. we know BW user ALE = aleremote, so should we maintain aleremote user using SU01 both in R/3 and BW before we do Transferring Global Settings from Source Systems
Thanks for the answer.Is anyone know how to setting Transferring Global Settings from Source Systems, your answer will be high appreciate.
Maybe you are looking for
-
Spotlight reindex, mds crash
Hello, I was searching a lot of stuff and I didn't found any resonable solution. It starts about the last update to 10.9.1. (17.12.). Main problem is like this: every time I open a lid on my AriMac, spotlight is starting reindexation. I found some li
-
Is there no pre-sign button on the Apple Watch shipping notification
I have received the shipping notification email from Apple. It says the shipment requires a signature. The usual "Pre-sign for this shipment" button is missing. Is there no way to leave a signature for UPS delivery of an APPLE WATCH? I have always
-
Question - purchased teacher edition. submitted info, have not received Serial Number?
-
I am trying to install Office:Mac 2011 on my Air using a remote disc. I have gotten all the way to where I am installing it on my air, but it is telling me to select a disk to install office on and there is nothing to select. The box is empty.
-
Hello, Is XDK for PL/SQL exists in current version of XDK 10g? What are the plans of Oracle about PL/SQL support for XML? Thank you. Alexey