USB connection dropping suddenly
I'm using my phone as usb modem to access internet via ovi suite. I do have a solid cable connection too but I swapped over to 3G because I noticed that it's more reliable and faster than wired connection. (Because our service provider is an **bleep** and doesnt want to fix the problem)
Normally a drop in connection wouldnt matter, but because I play fast paced online games, connection drops are fatal.
I was fine for quite a while but ever since last weekend I've been having problems with the connection dropping, usually I was able to fix this with either restarting my PC or phone.
I read that this might be cause of some usb drivers in windows from some older thread, but I doubt I could use the same drivers for my N8.
Anyway, my phone is N8 and I'm using the cable that came with it. And my machine runs Windows 7.
Solved!
Go to Solution.
ichihaifu wrote:
Or it might be just the 3G dropping, is there anything I can do about that either?
Switch from Dual Mode to 3G.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009
Similar Messages
-
Running RDS on Server 2008r2 - connection drops suddenly and completely
We have about 50 RDS servers running on Windows 2008r2. These are all virtual machines running within VMWare ESXi 5.5. Some are configured in a farm and others are "stand-alone". All are in a single domain environment and we have no
issues logging in and working. BUT, at random times, users will "lose" their sessions. Not the normal "session has disconnected, we will try to connect x number of times" that you see if there is a connectivity problem.
When the connection/session is "lost" the RDP client just closes immediately. Clients PCs are running on a mix of XP and Windows 7. Does not seem to be any rhyme or reason on which machines or users this happens to. Have found nothing
relative in the server or client logs. It's not a keep-alive issue, you can be actively typing when this occurs. Some times we can go for a day or two with no disconnects and sometimes some users will be disconnected 8-10 times a day.
This seems to happen at random - one user may be disconnected one time and everyone else is fine. The next time it may be 10 sessions. Haven't been able to tie it to a single farm, group of servers, group of users, time of day, or group of PCs.
Any ideas?
Thanks!Hi,
After referring to your comment, it seems that your user may be limited in number of users who connect simultaneously to RD session. Limited number of RDP connections can be due to misconfigured Group Policy or RDP-Tcp properties in Remote Desktop Services
Configuration, by default, the connection is configured to allow an unlimited number of sessions to connect to the server.
You can verify “Limit number of connections" Gpo Policy by below mention path.
Local Computer Policy > Computer Configuration>Administrative Templates > Windows Components > Remote Desktop Services> Remote Desktop Session Host> Connections "Limit number of connections"
You can also verify under RDP-Tcp properties. For more information you can refer below article for further troubleshooting.
Remote Desktop disconnected or can’t connect to remote computer or to Remote Desktop server (Terminal Server) that is running Windows Server 2008 R2
Hope it helps!
Thanks,
Dharmesh -
External hard drive constantly dropping USB connection
Last week I bought a 1 TB drive from Hitachi to use for video storage and rendering, but it seems that every 15 minutes or so, the USB connection drops itself and then immediately reconnects. This of course proves to be a problem when it happens while I'm transferring data. I've had a number of uploads fail because of this and I don't want to start editing several hours of HDV video in FCP only to have the connection constantly dropped.
Any thoughts/suggestions?
Thanks.I've recently started having similar problems with my external USB devices - including a 500GB Western Digital External USB drive. But it's not just the drive. I have a USB hub plugged into the left USB port and the whole thing was switching on and off - turning off my mouse, disconnecting my USB drive and restarting my iPhone charging (and restarting iPhoto every time, of course, to download any new photos).
Initially I suspected the USB hub (which has it's own power supply) had gone bad somehow but after reading about all the problems MacBook Pro owners have been having with their USB devices I'm not so sure anymore.
Trying the right USB port now to see if it exhibits the same problems. So far it's working fine with just the drive plugged in. I'll let you know. -
WRT160NL - Connection drops, Reboots, USB performance
WRT160NL - Connection drops, Reboots, USB performance
After reading many posts dating back several months regarding internittent connectivty drops, usb performance issues and users having to reboot there routers frequently with the WRT160NL, I was fairly convinced this is a FIRMWARE issue and not a config or hardware problem. Nevertheless after adjusting settings as per Linksys support, replacing my DSL modem, and yes RMA'ing my WRT160NL, I am still having these issues with this device which points definetly is the direction of "FIRWARE".
I'm hoping these posts are being acted on and escalated to Linksys(Cisco) so that we can get a resolution to our frustrating scenerio. I have seen post after post with similar issues and complaints. When are we going to see a FIRMWARE upgrade?Same issues, same problems. Tried all suggested configurations from this forum. WRT160NL slows down and locks up after running 12 to 24 hours. Can not access router set up page after that. Running latest fireware. Considering putting it on a timer to reboot it every 12 hours. Must be a fireware issue or the entire production run is defective and should be recalled.
-
E51 - USB Modemm connections drop
Hello,
Im using my E51 with usb cable to my laptop to access the internet. After 20 minutes or so the connection drops (I still se the connected icon, but no internet).
This is solved if a click on disconnect on the PC Suite and the reconect again.
How can I avoid these drops?
GuillermoHi Alex,
First suspect is the infamous LaCie drive.
Does it have an A/C adapter? If so buy 2 or 3 replacement adapters, it's a well known problem.
If it's a Bus powered drive get either an A/C adapter or a Powered USB Hub. -
All of a sudden my personal hot spot isn't working. It only comes up with Bluetooth and USB connection options. Why would that be?
No I can not turn on the wifi either. I can get on the web on my phone and Facebook etc on phone but no wifi or hotspot
-
During iTunes update on my pc, my iPhone was connected to pc via usb & was syncing, suddenly my iPhone stopped connecting to wifi and cannot activate. I cannot access iPhone data as it says connect to iTunes to activate but cannot connect. How do i connect to iTunes to activate iPhone as iPhone cannot connect to WiFi or any other network
Please how do i reactivate iPhone?Hello DadiPrince,
The following article contains information beneficial to getting your iPhone back into normal working order.
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
Resolution
Perform the following steps if you receive one of the messages above:
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to Wi-Fi if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Applefor assistance.
All the best,
Allen -
Hp 6535b drops usb connection with kvm.
I have a hp 6535b and have a kvm attached to it. It drops usb connection on a regular basis and it is very annoying. I am not sure what i shoud do about it so any help will be appreciated.
Hi!, Ranothil: If you have the next cable and "null modem" (http://commerce.hpcalc.org/serialcable.php), you can transfer, anydata, from HP50G, to PC and viceversa, across Connectivity Kit (Conn4x), without problem. Please, see this link, with instruction's, for transfer data with serial cable, null modem and connectivity kit ... http://sense.net/~egan/skb/ and/or ... http://www.hpmuseum.org/cgi-sys/cgiwrap/hpmuseum/archv017.cgi?read=125259 Note: Better, if you transfer data, from HP50G to, PC and viceversa, across the microUSB.
-
My USB Ethernet connection drops when another USB device is plugged in?
I have a MacBook Air (Mac OS X 10.6.7 but it happened with older OS versions, too) and have a few issues with my wired ethernet connection. (through USB Ethernet adapter).
1. When I have the USB adapter plugged in when I wake the MacBook Air up it won't be recognised (have to plug it in after wake up)
2. (that is more annoying).When I have the Adapter connected and I plug in another USB device (like a USB stick) into the other slot, my USB EthernetConnection drops! Only once I unplug the adapter and plug it back in it works again.
Is there maybe a firmware upgrade that should be installed or something??
Does anybody have an idea???
ThanksHi, you can upgrade the Firmware for the wrt54g router under the system screen.
you will find the "upgrade Firmware" tab under the system screen.
Once the Firmware has been upgraded you can then reset the router by holding and pressing the reset on the back panel for 30seconds. And then reconfigure the router again. -
USB connectivity suddenly partly gone
For the last two days, for no apparent reason, I've lost USB connectivity to my digital camera, printer and USB memory stick. The keyboard and mouse are fine thankfully, so I can still work.
I'm a pretty seasoned Mac compaigner so I've checked all the usual stuff.
(1) Yes, all the missing peripherals show up under the System Profiler, so the USB ports aren't blown.
(2) This is on a G5 and the front USB port won't show the USB stick, nor will EITHER rear USB port allow the powered hub to run the printer. The same hub has a Bluetooth dongle in it which still does work.
(3) Switching the keyboard and mouse around to the other rear USB port takes the problem with it: That is, the keyboard and mouse work in the port that was not working with the powered hub and the powered hub won't work in the port in which the keyboard and mouse just worked,
(4) I've completely removed the powered hub and stuck the printer directly into the (now available) port on the back and the printer still won't work.
I don't know what else to do. There's no consistency here. Both rear USB ports work in certain circumstances.
Thanks."The problems appear to have gone, so thanks heaps for making me take another look at Onyx.
Problem solved!! "
Hi Michael, Welcome back to the Forums.
In your exuberance* you neglected you show your thank you to Ian via the star system. See Terms of Use or bottom of Apple email alerts to you.
* That's the usual reason. Typical response = "Sorry bout that. Here you go."
Glad it was that simple. Joyous Computing. JP -
T420's dropping USB connections
I've gotten several reports from users within our organization of losing the usb connection on their T420 series of laptops (also a couple of reports on desktops). They have the latest USB drivers installed. It seems to be random (making it difficult to really find the issue) and many times unplugging the device and plugging it back in resolves the issue but in many cases the laptop needs to be rebooted. Has anyone seen this issue or any suggestions? Let me know if you need additional information. I don't really have any event logs to offer right now as most of the time the users aren't keeping track of when it happens and notify us well after the fact.
Hi Mfergel,
Thank you for the reply!
There is one more option to speed up the data transfer rate, but you have make sure that you are using USB safety remove option for that.
In Device Manager, right-click the USB drive in Disk drives folder, then select Properties, switch to Policies tab, and choose Better performance. Click OK to keep it.
NOTE: If you use this method, make SURE you use the sub removal tool that pops up in your system tray when you first plugged in the device (system tray is the little area near your clock on the task bar)
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Connection drop iMac to Apple TV - OSX Lion
Hello.
Hope someone might have a solution. Ever since i changed to OSX Lion i have had a really irritating bug with my Wifi. While browsing, downloading and doing everyday stuff my connection is fine.
However when streaming movies and tv-shows to my Apple TV (2nd) i have been getting som nasty connection drops. Its not always but to often to be anoying since i havnt had this problem before.
Scenario: I can start a movie and watch almost an hour when all of a sudden the connection drops on my iMac Late 2009 - OSX Lion 10.7.3. Everytime this happens my Wifi icon turns gray and i need to shut the Wifi off and turn it on again and all works. But once it has started the connection drops every 10 min or so and i need to reboot the machine to be able to watch the movie like "normal".
The connection between my Airport Express and the Apple TV is no problem and works flawless but my Mac cant seem to handle the "heat". I didnt have this issue on SL so im a bit bugged about it.
RSSI: -45
SPEED: 130
This is what ive tried.
1. Repair the permissions thru the OS, and the Command and R at start up, including the "resetpassword" thing.
2. Update firmware on my Aiport Express and downgraded since it just got worse.
3. Updated the airport utility, but needed to install back the old one since the new for Lion doesnt support the switch between 2.4 and 5.0 band.
4. Reset PRAM
5. Reset SMC
6. Rebuild the connection by deleteing and resetting the router.
7. Done some cleanup with OnyX.
Now im out of ideas since nothing seem to work and i hate that i have all this Apple gear for thousands of dollars and the f**** Wifi ruins everything.
Anyone?
Cheers
ChrisI have the same issue
-
HP Officejet Pro L7590 won't print correctly after it sits a few days Windows Vista USB connection
I have a HP Officejet Pro L7590 All In One. It all of a sudden will not print correctly after it sits a few days. I purchased a new black/yellow printhead recently and it did print well for about a week. If it sits a few days, it acts up again. All I have to do to fix it is take out the yellow/black printhead clean with sterile water on a q tip the printhead, put it back in, and walla it prints again until the next time I want to use the printer, and the same thing again. Today I printed out some pictures after not using the printer for 5 days, the pics had large vertical stripes in them, the stripes have colors in them. I cleaned the printhead and it worked perfectly. Any ideas. I have replaced the black cartride, and the yellow recently.
Thanks for any helpRocky8,
This is a little outside our area of printing, but I'll try and help you the best I can. My question for you is the printer showing up under the USB menu in Parallels. If it's not showing up then you need to determine why the USB connection isn't showing up in your Parallels USB menu. This could be a couple of issues, but the one that I think might be happening is the version of the USB port your using. Can you verify that you're not connecting the printer via a USB 3.0 port. Try plugging into one of your other USB ports to see if the printer will show up in the parallels USB menu.
BT
Working for HP and here to help! -
Wifi connection drops down. [SOLVED]
Hi, I'm having some issues with the wifi, in my notebook lenovo b5070. The main problem is that the connection drops down after 20, 30 minutes. I tried to change from NetworkManager to Wicd, but that didn't change anything. I also tried to create a profile and connect me through netctl, but again that didn't change anything. Other issues that I'm having are: Sometimes I can't even connect to the wifi, or if I can connect finally, and I try to request some website, the browser keeps idle and finally shows a "Server not found" message. Also the wifi signal seems pretty fine. I also tried change the tx, rts to the max with iwconfig, but this didn't change anything. I'm running out of ideas. Any idea?
Here is some info:
[astinx@compu ~]$ lsusb
Bus 003 Device 002: ID 8087:8000 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 138a:0011 Validity Sensors, Inc. VFS5011 Fingerprint Reader
Bus 001 Device 004: ID 0bda:b728 Realtek Semiconductor Corp.
Bus 001 Device 003: ID 0c45:6514 Microdia
Bus 001 Device 002: ID 0458:012b KYE Systems Corp. (Mouse Systems)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[astinx@compu ~]$ iwconfig
wlp9s0 IEEE 802.11bgn ESSID:"albele"
Mode:Managed Frequency:2.437 GHz Access Point: 00:1D:7E:6A:C4:67
Bit Rate=54 Mb/s Tx-Power=20 dBm
Retry short limit:7 RTS thr=2347 B Fragment thr:off
Power Management:off
Link Quality=52/70 Signal level=-58 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
lo no wireless extensions.
enp8s0 no wireless extensions.
[astinx@compu ~]$ ifconfig
enp8s0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether f0:76:1c:0c:12:99 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 0 (Local Loopback)
RX packets 336 bytes 29472 (28.7 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 336 bytes 29472 (28.7 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlp9s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.111 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::fa77:2850:54a4:4213 prefixlen 64 scopeid 0x20<link>
ether 38:b1:db:4f:f7:33 txqueuelen 1000 (Ethernet)
RX packets 192 bytes 52270 (51.0 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1297 bytes 138803 (135.5 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
[astinx@compu ~]$ lspci -k
00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 0b)
Subsystem: Lenovo Device 3978
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)
Subsystem: Lenovo Device 3978
Kernel driver in use: i915
Kernel modules: i915
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 0b)
Subsystem: Lenovo Device 3978
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.0 USB controller: Intel Corporation 8 Series USB xHCI HC (rev 04)
Subsystem: Lenovo Device 3978
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:16.0 Communication controller: Intel Corporation 8 Series HECI #0 (rev 04)
Subsystem: Lenovo Device 3978
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
Subsystem: Lenovo Device 3978
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 1 (rev e4)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 2 (rev e4)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.2 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 3 (rev e4)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.3 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 4 (rev e4)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller: Intel Corporation 8 Series USB EHCI #1 (rev 04)
Subsystem: Lenovo Device 3978
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge: Intel Corporation 8 Series LPC Controller (rev 04)
Subsystem: Lenovo Device 3978
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller: Intel Corporation 8 Series SATA Controller 1 [AHCI mode] (rev 04)
Subsystem: Lenovo Device 3978
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation 8 Series SMBus Controller (rev 04)
Subsystem: Lenovo Device 3978
Kernel modules: i2c_i801
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)
Subsystem: Lenovo Device 3801
Kernel driver in use: rtsx_pci
Kernel modules: rtsx_pci
08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10)
Subsystem: Lenovo Device 380e
Kernel driver in use: r8169
Kernel modules: r8169
09:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter
Subsystem: Lenovo Device b736
Kernel driver in use: rtl8723be
Kernel modules: rtl8723be
[astinx@compu ~]$ lsusb
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.18.5-1-ARCH (builduser@tobias) (gcc version 4.9.2 20141224 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Jan 30 07:31:50 CET 2015
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=37f0494b-6280-4a2a-92af-9abc262b3476 rw resume=UUID=38f5c3ea-1283-4a7e-a952-49dee4e9b5ae quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009735ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000097360000-0x0000000097b5ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000097b60000-0x000000009c36efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009c36f000-0x000000009c56efff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000009c56f000-0x000000009cebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009cebf000-0x000000009cfbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by INSYDE Corp.
[ 0.000000] efi: ACPI=0x9cffe000 ACPI 2.0=0x9cffe014 SMBIOS=0x9cebef98
[ 0.000000] efi: mem00: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000001000-0x000000000006f000) (0MB)
[ 0.000000] efi: mem02: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000006f000-0x0000000000070000) (0MB)
[ 0.000000] efi: mem03: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000070000-0x0000000000080000) (0MB)
[ 0.000000] efi: mem04: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000000080000-0x0000000000082000) (0MB)
[ 0.000000] efi: mem05: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000082000-0x0000000000088000) (0MB)
[ 0.000000] efi: mem06: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x0000000000088000-0x000000000009f000) (0MB)
[ 0.000000] efi: mem07: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000009f000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem08: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000000100000-0x0000000000f3b000) (14MB)
[ 0.000000] efi: mem09: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000f3b000-0x0000000037926000) (873MB)
[ 0.000000] efi: mem10: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000037926000-0x0000000037c8b000) (3MB)
[ 0.000000] efi: mem11: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000037c8b000-0x000000006ea96000) (878MB)
[ 0.000000] efi: mem12: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000006ea96000-0x0000000094b70000) (608MB)
[ 0.000000] efi: mem13: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000094b70000-0x0000000094b90000) (0MB)
[ 0.000000] efi: mem14: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000094b90000-0x00000000968e3000) (29MB)
[ 0.000000] efi: mem15: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000968e3000-0x0000000097360000) (10MB)
[ 0.000000] efi: mem16: [Reserved | | | | | |WB|WT|WC|UC] range=[0x0000000097360000-0x0000000097b60000) (8MB)
[ 0.000000] efi: mem17: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000097b60000-0x0000000097d52000) (1MB)
[ 0.000000] efi: mem18: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x0000000097d52000-0x0000000097d6f000) (0MB)
[ 0.000000] efi: mem19: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000097d6f000-0x000000009951f000) (23MB)
[ 0.000000] efi: mem20: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009951f000-0x0000000099f09000) (9MB)
[ 0.000000] efi: mem21: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000099f09000-0x0000000099f0e000) (0MB)
[ 0.000000] efi: mem22: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000099f0e000-0x0000000099f14000) (0MB)
[ 0.000000] efi: mem23: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000099f14000-0x0000000099f16000) (0MB)
[ 0.000000] efi: mem24: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000099f16000-0x0000000099f3f000) (0MB)
[ 0.000000] efi: mem25: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000099f3f000-0x0000000099f40000) (0MB)
[ 0.000000] efi: mem26: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000099f40000-0x000000009a08e000) (1MB)
[ 0.000000] efi: mem27: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009a08e000-0x000000009a094000) (0MB)
[ 0.000000] efi: mem28: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009a094000-0x000000009a095000) (0MB)
[ 0.000000] efi: mem29: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009a095000-0x000000009a097000) (0MB)
[ 0.000000] efi: mem30: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009a097000-0x000000009a09b000) (0MB)
[ 0.000000] efi: mem31: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009a09b000-0x000000009a09c000) (0MB)
[ 0.000000] efi: mem32: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009a09c000-0x000000009a0d5000) (0MB)
[ 0.000000] efi: mem33: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009a0d5000-0x000000009a0d7000) (0MB)
[ 0.000000] efi: mem34: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009a0d7000-0x000000009a0dc000) (0MB)
[ 0.000000] efi: mem35: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009a0dc000-0x000000009a0df000) (0MB)
[ 0.000000] efi: mem36: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009a0df000-0x000000009a0e7000) (0MB)
[ 0.000000] efi: mem37: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009a0e7000-0x000000009a0ea000) (0MB)
[ 0.000000] efi: mem38: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009a0ea000-0x000000009a0eb000) (0MB)
[ 0.000000] efi: mem39: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009a0eb000-0x000000009a0ef000) (0MB)
[ 0.000000] efi: mem40: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009a0ef000-0x000000009a193000) (0MB)
[ 0.000000] efi: mem41: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009a193000-0x000000009a194000) (0MB)
[ 0.000000] efi: mem42: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009a194000-0x000000009bd6f000) (27MB)
[ 0.000000] efi: mem43: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009bd6f000-0x000000009bf51000) (1MB)
[ 0.000000] efi: mem44: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009bf51000-0x000000009bf5b000) (0MB)
[ 0.000000] efi: mem45: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000009bf5b000-0x000000009c36f000) (4MB)
[ 0.000000] efi: mem46: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x000000009c36f000-0x000000009c56f000) (2MB)
[ 0.000000] efi: mem47: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x000000009c56f000-0x000000009cabf000) (5MB)
[ 0.000000] efi: mem48: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000009cabf000-0x000000009cebf000) (4MB)
[ 0.000000] efi: mem49: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x000000009cebf000-0x000000009cfbf000) (1MB)
[ 0.000000] efi: mem50: [ACPI Reclaim Memory| | | | | |WB|WT|WC|UC] range=[0x000000009cfbf000-0x000000009cfff000) (0MB)
[ 0.000000] efi: mem51: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009cfff000-0x000000009d000000) (0MB)
[ 0.000000] efi: mem52: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000100000000-0x000000015f600000) (1526MB)
[ 0.000000] efi: mem53: [Reserved | | | | | | | | | ] range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[ 0.000000] efi: mem54: [Reserved | | | | | | | | | ] range=[0x000000009d000000-0x000000009fa00000) (42MB)
[ 0.000000] efi: mem55: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000e0000000-0x00000000f0000000) (256MB)
[ 0.000000] efi: mem56: [Reserved | | | | | | | | | ] range=[0x00000000fe101000-0x00000000fe113000) (0MB)
[ 0.000000] efi: mem57: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000feb00000-0x00000000feb10000) (0MB)
[ 0.000000] efi: mem58: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem59: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed00000-0x00000000fed1c000) (0MB)
[ 0.000000] efi: mem60: [Memory Mapped I/O |RUN| | | | | | | | ] range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem61: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed20000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem62: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000ffa00000-0x0000000100000000) (6MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 20384/Lenovo B50-70, BIOS 9DCN21WW(V2.02) 06/27/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x15f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
[ 0.000000] 1 base 009D000000 mask 7FFF000000 uncachable
[ 0.000000] 2 base 009E000000 mask 7FFE000000 uncachable
[ 0.000000] 3 base 00A0000000 mask 7FE0000000 uncachable
[ 0.000000] 4 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0x9d000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000082000] 82000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[ 0.000000] BRK [0x01b38000, 0x01b38fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x15f400000-0x15f5fffff]
[ 0.000000] [mem 0x15f400000-0x15f5fffff] page 2M
[ 0.000000] BRK [0x01b39000, 0x01b39fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x15c000000-0x15f3fffff]
[ 0.000000] [mem 0x15c000000-0x15f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x15bffffff]
[ 0.000000] [mem 0x100000000-0x13fffffff] page 1G
[ 0.000000] [mem 0x140000000-0x15bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x9735ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0x971fffff] page 2M
[ 0.000000] [mem 0x97200000-0x9735ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x97b60000-0x9c36efff]
[ 0.000000] [mem 0x97b60000-0x97bfffff] page 4k
[ 0.000000] [mem 0x97c00000-0x9c1fffff] page 2M
[ 0.000000] [mem 0x9c200000-0x9c36efff] page 4k
[ 0.000000] BRK [0x01b3a000, 0x01b3afff] PGTABLE
[ 0.000000] BRK [0x01b3b000, 0x01b3bfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x9cfff000-0x9cffffff]
[ 0.000000] [mem 0x9cfff000-0x9cffffff] page 4k
[ 0.000000] RAMDISK: [mem 0x37926000-0x37c8afff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000009CFFE014 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x000000009CFFE210 0000B4 (v01 LENOVO CB-01 00000001 01000013)
[ 0.000000] ACPI: FACP 0x000000009CFF8000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 0x000000009CFE7000 00DA18 (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FACS 0x000000009CFBA000 000040
[ 0.000000] ACPI: UEFI 0x000000009CFFD000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT 0x000000009CFFB000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MSDM 0x000000009CFFA000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! 0x000000009CFF9000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 0x000000009CFF7000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 0x000000009CFF6000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 0x000000009CFF5000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: WDAT 0x000000009CFE6000 000224 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFE5000 000700 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: BOOT 0x000000009CFE3000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: LPIT 0x000000009CFE2000 000094 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASPT 0x000000009CFE0000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DBGP 0x000000009CFDF000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFDA000 000539 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFD9000 000AD8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFD5000 003537 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: BGRT 0x000000009CFD4000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000015f5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x15f5f9000-0x15f5fcfff]
[ 0.000000] [ffffea0000000000-ffffea00057fffff] PMD -> [ffff88015ac00000-ffff88015ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x15f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0006efff]
[ 0.000000] node 0: [mem 0x00070000-0x00087fff]
[ 0.000000] node 0: [mem 0x00100000-0x9735ffff]
[ 0.000000] node 0: [mem 0x97b60000-0x9c36efff]
[ 0.000000] node 0: [mem 0x9cfff000-0x9cffffff]
[ 0.000000] node 0: [mem 0x100000000-0x15f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x15f5fffff]
[ 0.000000] On node 0 totalpages: 1028342
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 24 pages reserved
[ 0.000000] DMA zone: 3974 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9902 pages used for memmap
[ 0.000000] DMA32 zone: 633712 pages, LIFO batch:31
[ 0.000000] Normal zone: 6104 pages used for memmap
[ 0.000000] Normal zone: 390656 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0x9da00000-0x9f9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x97360000-0x97b5ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9c36f000-0x9c56efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9c56f000-0x9cebefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9cebf000-0x9cfbefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9cfbf000-0x9cffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9f9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfe100fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88015f200000 s82880 r8192 d31808 u262144
[ 0.000000] pcpu-alloc: s82880 r8192 d31808 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1012248
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=37f0494b-6280-4a2a-92af-9abc262b3476 rw resume=UUID=38f5c3ea-1283-4a7e-a952-49dee4e9b5ae quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3909256K/4113368K available (5480K kernel code, 908K rwdata, 1720K rodata, 1160K init, 1184K bss, 204112K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:760 0
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2394.377 MHz processor
[ 0.000041] Calibrating delay loop (skipped), value calculated using timer frequency.. 4790.28 BogoMIPS (lpj=7981256)
[ 0.000045] pid_max: default: 32768 minimum: 301
[ 0.000053] ACPI: Core revision 20140926
[ 0.018809] ACPI: All ACPI Tables successfully acquired
[ 0.039185] Security Framework initialized
[ 0.039194] Yama: becoming mindful.
[ 0.039553] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.040627] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.041121] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.041129] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.041378] Initializing cgroup subsys memory
[ 0.041384] Initializing cgroup subsys devices
[ 0.041386] Initializing cgroup subsys freezer
[ 0.041389] Initializing cgroup subsys net_cls
[ 0.041391] Initializing cgroup subsys blkio
[ 0.041417] CPU: Physical Processor ID: 0
[ 0.041419] CPU: Processor Core ID: 0
[ 0.041424] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.042651] mce: CPU supports 7 MCE banks
[ 0.042667] CPU0: Thermal monitoring enabled (TM1)
[ 0.042682] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.042812] Freeing SMP alternatives memory: 20K (ffffffff81a07000 - ffffffff81a0c000)
[ 0.043856] Ignoring BGRT: invalid status 0 (expected 1)
[ 0.045955] ftrace: allocating 20931 entries in 82 pages
[ 0.058119] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.091151] smpboot: CPU0: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz (fam: 06, model: 45, stepping: 01)
[ 0.091159] TSC deadline timer enabled
[ 0.091185] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.091212] ... version: 3
[ 0.091214] ... bit width: 48
[ 0.091215] ... generic registers: 4
[ 0.091216] ... value mask: 0000ffffffffffff
[ 0.091217] ... max period: 0000ffffffffffff
[ 0.091218] ... fixed-purpose events: 3
[ 0.091220] ... event mask: 000000070000000f
[ 0.111308] x86: Booting SMP configuration:
[ 0.111311] .... node #0, CPUs: #1
[ 0.125959] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.132620] #2 #3
[ 0.168461] x86: Booted up 1 node, 4 CPUs
[ 0.168465] smpboot: Total of 4 processors activated (19162.14 BogoMIPS)
[ 0.173479] devtmpfs: initialized
[ 0.176167] PM: Registering ACPI NVS region [mem 0x9cebf000-0x9cfbefff] (1048576 bytes)
[ 0.177292] pinctrl core: initialized pinctrl subsystem
[ 0.177339] RTC time: 15:39:50, date: 02/08/15
[ 0.177475] NET: Registered protocol family 16
[ 0.189973] cpuidle: using governor ladder
[ 0.203321] cpuidle: using governor menu
[ 0.203363] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.203364] ACPI: bus type PCI registered
[ 0.203366] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.203456] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.203459] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.203881] PCI: Using configuration type 1 for base access
[ 0.217092] ACPI: Added _OSI(Module Device)
[ 0.217094] ACPI: Added _OSI(Processor Device)
[ 0.217096] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.217098] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.222927] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.237854] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.250192] ACPI: Dynamic OEM Table Load:
[ 0.250204] ACPI: SSDT 0xFFFF880158F80C00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20121220)
[ 0.263714] ACPI: Dynamic OEM Table Load:
[ 0.263726] ACPI: SSDT 0xFFFF880158F59800 0005AA (v01 PmRef ApIst 00003000 INTL 20121220)
[ 0.276877] ACPI: Dynamic OEM Table Load:
[ 0.276887] ACPI: SSDT 0xFFFF880158E92800 000119 (v01 PmRef ApCst 00003000 INTL 20121220)
[ 0.303769] ACPI: Interpreter enabled
[ 0.303781] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
[ 0.303790] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
[ 0.303817] ACPI: (supports S0 S3 S4 S5)
[ 0.303818] ACPI: Using IOAPIC for interrupt routing
[ 0.303851] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.416427] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.416435] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.417003] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.417721] PCI host bridge to bus 0000:00
[ 0.417725] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.417728] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.417730] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.417732] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.417734] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.417736] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.417738] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.417740] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[ 0.417742] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.417744] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.417746] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.417748] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.417750] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
[ 0.417760] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 0.417946] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[ 0.417962] pci 0000:00:02.0: reg 0x10: [mem 0xb2000000-0xb23fffff 64bit]
[ 0.417971] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.417977] pci 0000:00:02.0: reg 0x20: [io 0x6000-0x603f]
[ 0.418153] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 0.418164] pci 0000:00:03.0: reg 0x10: [mem 0xb2610000-0xb2613fff 64bit]
[ 0.418365] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 0.418385] pci 0000:00:14.0: reg 0x10: [mem 0xb2600000-0xb260ffff 64bit]
[ 0.418450] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.418565] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.418612] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ 0.418635] pci 0000:00:16.0: reg 0x10: [mem 0xb2618000-0xb261801f 64bit]
[ 0.418711] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.418877] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 0.418893] pci 0000:00:1b.0: reg 0x10: [mem 0xb2614000-0xb2617fff 64bit]
[ 0.418968] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.419082] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.419126] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[ 0.419198] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.419353] pci 0000:00:1c.1: [8086:9c12] type 01 class 0x060400
[ 0.419428] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.419584] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
[ 0.419659] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.419813] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[ 0.419888] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.420052] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 0.420074] pci 0000:00:1d.0: reg 0x10: [mem 0xb261c000-0xb261c3ff]
[ 0.420172] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.420309] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.420363] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ 0.420631] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 0.420647] pci 0000:00:1f.2: reg 0x10: [io 0x6088-0x608f]
[ 0.420655] pci 0000:00:1f.2: reg 0x14: [io 0x6094-0x6097]
[ 0.420663] pci 0000:00:1f.2: reg 0x18: [io 0x6080-0x6087]
[ 0.420671] pci 0000:00:1f.2: reg 0x1c: [io 0x6090-0x6093]
[ 0.420678] pci 0000:00:1f.2: reg 0x20: [io 0x6060-0x607f]
[ 0.420686] pci 0000:00:1f.2: reg 0x24: [mem 0xb261b000-0xb261b7ff]
[ 0.420728] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.420878] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 0.420894] pci 0000:00:1f.3: reg 0x10: [mem 0xb2619000-0xb26190ff 64bit]
[ 0.420915] pci 0000:00:1f.3: reg 0x20: [io 0x6040-0x605f]
[ 0.421136] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.421234] pci 0000:02:00.0: [10ec:5229] type 00 class 0xff0000
[ 0.421269] pci 0000:02:00.0: reg 0x10: [mem 0xb1000000-0xb1000fff]
[ 0.421424] pci 0000:02:00.0: supports D1 D2
[ 0.421427] pci 0000:02:00.0: PME# supported from D1 D2 D3hot
[ 0.421466] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.427022] pci 0000:00:1c.1: PCI bridge to [bus 02-07]
[ 0.427027] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
[ 0.427030] pci 0000:00:1c.1: bridge window [mem 0xb1000000-0xb1ffffff]
[ 0.427036] pci 0000:00:1c.1: bridge window [mem 0xb0000000-0xb0ffffff 64bit pref]
[ 0.427119] pci 0000:08:00.0: [10ec:8168] type 00 class 0x020000
[ 0.427139] pci 0000:08:00.0: reg 0x10: [io 0x4000-0x40ff]
[ 0.427169] pci 0000:08:00.0: reg 0x18: [mem 0xb2504000-0xb2504fff 64bit]
[ 0.427188] pci 0000:08:00.0: reg 0x20: [mem 0xb2500000-0xb2503fff 64bit]
[ 0.427291] pci 0000:08:00.0: supports D1 D2
[ 0.427293] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.427358] pci 0000:08:00.0: System wakeup disabled by ACPI
[ 0.433685] pci 0000:00:1c.2: PCI bridge to [bus 08]
[ 0.433689] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.433693] pci 0000:00:1c.2: bridge window [mem 0xb2500000-0xb25fffff]
[ 0.433780] pci 0000:09:00.0: [10ec:b723] type 00 class 0x028000
[ 0.433803] pci 0000:09:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.433837] pci 0000:09:00.0: reg 0x18: [mem 0xb2400000-0xb2403fff 64bit]
[ 0.433959] pci 0000:09:00.0: supports D1 D2
[ 0.433961] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.433994] pci 0000:09:00.0: System wakeup disabled by ACPI
[ 0.443696] pci 0000:00:1c.3: PCI bridge to [bus 09]
[ 0.443699] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.443703] pci 0000:00:1c.3: bridge window [mem 0xb2400000-0xb24fffff]
[ 0.443740] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.497639] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.497696] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.497748] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.497800] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.497851] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.497902] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.497953] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.498004] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.498197] ACPI: Enabled 5 GPEs in block 00 to 7F
[ 0.498242] ACPI : EC: GPE = 0x27, I/O: command/status = 0x66, data = 0x62
[ 0.498365] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.498368] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.498372] vgaarb: loaded
[ 0.498373] vgaarb: bridge control possible 0000:00:02.0
[ 0.498519] PCI: Using ACPI for IRQ routing
[ 0.504636] PCI: pci_cache_line_size set to 64 bytes
[ 0.504686] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
[ 0.504688] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[ 0.504689] e820: reserve RAM buffer [mem 0x97360000-0x97ffffff]
[ 0.504691] e820: reserve RAM buffer [mem 0x9c36f000-0x9fffffff]
[ 0.504693] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
[ 0.504695] e820: reserve RAM buffer [mem 0x15f600000-0x15fffffff]
[ 0.504822] NetLabel: Initializing
[ 0.504823] NetLabel: domain hash size = 128
[ 0.504824] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.504838] NetLabel: unlabeled traffic allowed by default
[ 0.504863] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.504870] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.506900] Switched to clocksource hpet
[ 0.512939] pnp: PnP ACPI init
[ 0.513126] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.513129] system 00:00: [io 0x0500-0x053f] has been reserved
[ 0.513132] system 00:00: [io 0xffff] has been reserved
[ 0.513134] system 00:00: [io 0xffff] has been reserved
[ 0.513136] system 00:00: [io 0xffff] has been reserved
[ 0.513139] system 00:00: [io 0x1800-0x18fe] could not be reserved
[ 0.513141] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.513145] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.513202] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.513256] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.513259] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.513288] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.513351] pnp 00:04: Plug and Play ACPI device, IDs SYN2b39 SYN0700 SYN0002 PNP0f13 (active)
[ 0.563797] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.563800] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.563802] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.563804] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.563807] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.563809] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.563811] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.563813] system 00:05: [mem 0xff000000-0xff000fff] has been reserved
[ 0.563816] system 00:05: [mem 0xff001000-0xff0010ff] has been reserved
[ 0.563818] system 00:05: [mem 0xff010000-0xffffffff] could not be reserved
[ 0.563821] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.563823] system 00:05: [mem 0x9fa20000-0x9fa20fff] has been reserved
[ 0.563825] system 00:05: [mem 0x9fa10000-0x9fa1ffff] has been reserved
[ 0.563829] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.564138] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.564571] pnp: PnP ACPI: found 7 devices
[ 0.571172] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.571185] pci 0000:00:1c.1: PCI bridge to [bus 02-07]
[ 0.571188] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
[ 0.571193] pci 0000:00:1c.1: bridge window [mem 0xb1000000-0xb1ffffff]
[ 0.571197] pci 0000:00:1c.1: bridge window [mem 0xb0000000-0xb0ffffff 64bit pref]
[ 0.571203] pci 0000:00:1c.2: PCI bridge to [bus 08]
[ 0.571206] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.571211] pci 0000:00:1c.2: bridge window [mem 0xb2500000-0xb25fffff]
[ 0.571218] pci 0000:00:1c.3: PCI bridge to [bus 09]
[ 0.571221] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.571226] pci 0000:00:1c.3: bridge window [mem 0xb2400000-0xb24fffff]
[ 0.571235] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.571237] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.571239] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.571241] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.571243] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.571245] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.571247] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.571249] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.571251] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.571253] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.571255] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.571257] pci_bus 0000:00: resource 15 [mem 0x9fa00000-0xfeafffff]
[ 0.571260] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
[ 0.571261] pci_bus 0000:02: resource 1 [mem 0xb1000000-0xb1ffffff]
[ 0.571264] pci_bus 0000:02: resource 2 [mem 0xb0000000-0xb0ffffff 64bit pref]
[ 0.571266] pci_bus 0000:08: resource 0 [io 0x4000-0x4fff]
[ 0.571268] pci_bus 0000:08: resource 1 [mem 0xb2500000-0xb25fffff]
[ 0.571270] pci_bus 0000:09: resource 0 [io 0x3000-0x3fff]
[ 0.571272] pci_bus 0000:09: resource 1 [mem 0xb2400000-0xb24fffff]
[ 0.571305] NET: Registered protocol family 2
[ 0.571528] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.571618] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.571715] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.571736] TCP: reno registered
[ 0.571744] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.571763] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.571824] NET: Registered protocol family 1
[ 0.571842] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.583761] PCI: CLS 64 bytes, default 64
[ 0.583812] Unpacking initramfs...
[ 0.665763] Freeing initrd memory: 3476K (ffff880037926000 - ffff880037c8b000)
[ 0.665775] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.665778] software IO TLB [mem 0x90b70000-0x94b70000] (64MB) mapped at [ffff880090b70000-ffff880094b6ffff]
[ 0.665818] Simple Boot Flag at 0x44 set to 0x1
[ 0.666015] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.666080] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x17
[ 0.666087] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x17
[ 0.666095] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x17
[ 0.666104] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x17
[ 0.666156] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 0.666187] Scanning for low memory corruption every 60 seconds
[ 0.666541] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.666577] Initialise system trusted keyring
[ 0.666959] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.668721] zpool: loaded
[ 0.668726] zbud: loaded
[ 0.668990] VFS: Disk quotas dquot_6.5.2
[ 0.669031] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.669172] msgmni has been set to 7751
[ 0.669234] Key type big_key registered
[ 0.669453] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.669499] io scheduler noop registered
[ 0.669502] io scheduler deadline registered
[ 0.669540] io scheduler cfq registered (default)
[ 0.669759] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.669935] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.670110] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.670269] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.670374] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.670379] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.670396] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.670398] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.670402] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.670419] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.670421] pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
[ 0.670424] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 0.670440] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.670442] pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
[ 0.670446] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.670466] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.670499] pciehp 0000:00:1c.1:pcie04: Slot #1 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
[ 0.670533] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
[ 0.670539] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.670583] efifb: probing for efifb
[ 0.670605] efifb: framebuffer at 0xa0000000, mapped to 0xffffc90010800000, using 4160k, total 4160k
[ 0.670606] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 0.670607] efifb: scrolling: redraw
[ 0.670609] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.674675] Console: switching to colour frame buffer device 170x48
[ 0.678177] fb0: EFI VGA frame buffer device
[ 0.678188] intel_idle: MWAIT substates: 0x11142120
[ 0.678190] intel_idle: v0.4 model 0x45
[ 0.678191] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.678506] GHES: HEST is not enabled!
[ 0.678574] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.679056] Linux agpgart interface v0.103
[ 0.679108] rtc_cmos 00:01: RTC can wake from S4
[ 0.679243] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.679273] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.679287] Intel P-state driver initializing.
[ 0.679431] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.679696] TCP: cubic registered
[ 0.679919] NET: Registered protocol family 10
[ 0.680456] NET: Registered protocol family 17
[ 0.681245] Loading compiled-in X.509 certificates
[ 0.681277] registered taskstats version 1
[ 0.682279] Magic number: 3:299:689
[ 0.682435] rtc_cmos 00:01: setting system clock to 2015-02-08 15:39:50 UTC (1423409990)
[ 0.682615] PM: Checking hibernation image partition UUID=38f5c3ea-1283-4a7e-a952-49dee4e9b5ae
[ 0.682621] PM: Hibernation image not present or could not be loaded.
[ 0.684595] Freeing unused kernel memory: 1160K (ffffffff818e5000 - ffffffff81a07000)
[ 0.684599] Write protecting the kernel read-only data: 8192k
[ 0.688817] Freeing unused kernel memory: 652K (ffff88000155d000 - ffff880001600000)
[ 0.690614] Freeing unused kernel memory: 328K (ffff8800017ae000 - ffff880001800000)
[ 0.702916] random: systemd-tmpfile urandom read with 3 bits of entropy available
[ 0.718779] sdhci: Secure Digital Host Controller Interface driver
[ 0.718781] sdhci: Copyright(c) Pierre Ossman
[ 0.720168] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS1] at 0x60,0x64 irq 1,12
[ 0.726783] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.726825] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.727977] ACPI: bus type USB registered
[ 0.727998] usbcore: registered new interface driver usbfs
[ 0.728005] usbcore: registered new interface driver hub
[ 0.728031] usbcore: registered new device driver usb
[ 0.728826] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.728833] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.728904] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.728919] xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X
[ 0.729105] hub 1-0:1.0: USB hub found
[ 0.729116] hub 1-0:1.0: 9 ports detected
[ 0.729254] rtsx_pci 0000:02:00.0: irq 45 for MSI/MSI-X
[ 0.729269] rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 45
[ 0.729962] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.730134] ehci-pci: EHCI PCI platform driver
[ 0.731658] SCSI subsystem initialized
[ 0.732538] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.732545] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.732737] hub 2-0:1.0: USB hub found
[ 0.732750] hub 2-0:1.0: 4 ports detected
[ 0.733058] libata version 3.00 loaded.
[ 0.733952] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.733959] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 0.733972] ehci-pci 0000:00:1d.0: debug port 2
[ 0.737882] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.737904] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb261c000
[ 0.747112] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.747298] hub 3-0:1.0: USB hub found
[ 0.747312] hub 3-0:1.0: 2 ports detected
[ 0.747491] ahci 0000:00:1f.2: version 3.0
[ 0.747673] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
[ 0.747695] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.760531] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
[ 0.760537] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst
[ 0.761117] scsi host0: ahci
[ 0.761280] scsi host1: ahci
[ 0.761400] scsi host2: ahci
[ 0.761527] scsi host3: ahci
[ 0.761587] ata1: SATA max UDMA/133 abar m2048@0xb261b000 port 0xb261b100 irq 46
[ 0.761590] ata2: SATA max UDMA/133 abar m2048@0xb261b000 port 0xb261b180 irq 46
[ 0.761591] ata3: DUMMY
[ 0.761592] ata4: DUMMY
[ 0.763988] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.054094] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.080772] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.090784] usb 1-3: new low-speed USB device number 2 using xhci_hcd
[ 1.108052] ata1.00: ATA-8: ST500LT012-1DG142, 0002LVM1, max UDMA/133
[ 1.108057] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.147102] ata1.00: configured for UDMA/133
[ 1.147357] scsi 0:0:0:0: Direct-Access ATA ST500LT012-1DG14 LVM1 PQ: 0 ANSI: 5
[ 1.178260] hub 3-1:1.0: USB hub found
[ 1.178324] hub 3-1:1.0: 8 ports detected
[ 1.267676] usb 1-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.269353] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.271432] usbcore: registered new interface driver usbhid
[ 1.271435] usbhid: USB HID core driver
[ 1.427737] usb 1-6: new high-speed USB device number 3 using xhci_hcd
[ 1.467751] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.472648] ata2.00: ATAPI: PLDS DVD-RW DA8A5SH, RL61, max UDMA/100
[ 1.473654] ata2.00: configured for UDMA/100
[ 1.487478] scsi 1:0:0:0: CD-ROM PLDS DVD-RW DA8A5SH RL61 PQ: 0 ANSI: 5
[ 1.506690] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.506695] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.506762] sd 0:0:0:0: [sda] Write Protect is off
[ 1.506765] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.506805] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.526586] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.526589] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.526753] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.576727] sda: sda1 sda2 sda3 sda4
[ 1.577520] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.668501] tsc: Refined TSC clocksource calibration: 2394.458 MHz
[ 1.834689] usb 1-7: new full-speed USB device number 4 using xhci_hcd
[ 1.866481] PM: Starting manual resume from disk
[ 1.866486] PM: Hibernation image partition 8:2 present
[ 1.866488] PM: Looking for hibernation image.
[ 1.866742] PM: Image not found (code -22)
[ 1.866745] PM: Hibernation image not present or could not be loaded.
[ 2.008615] usb 1-7: No LPM exit latency info found, disabling LPM.
[ 2.168326] usb 1-8: new full-speed USB device number 5 using xhci_hcd
[ 2.200127] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 2.668929] Switched to clocksource tsc
[ 2.998993] random: nonblocking pool is initialized
[ 5.035645] EXT4-fs (sda4): re-mounted. Opts: discard
[ 7.983617] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.001442] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input2
[ 8.001451] ACPI: Power Button [PWRB]
[ 8.001539] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input3
[ 8.001584] ACPI: Lid Switch [LID0]
[ 8.001677] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 8.001681] ACPI: Power Button [PWRF]
[ 8.067218] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X
[ 8.169733] thermal LNXTHERM:00: registered as thermal_zone0
[ 8.169739] ACPI: Thermal Zone [TZ00] (29 C)
[ 8.239918] ACPI: Battery Slot [BAT1] (battery present)
[ 8.270385] ACPI: AC Adapter [ACAD] (on-line)
[ 8.341145] [drm] Initialized drm 1.1.0 20060810
[ 8.435780] ACPI Warning: SystemIO range 0x0000000000006040-0x000000000000605f conflicts with OpRegion 0x0000000000006040-0x000000000000604f (\_SB_.PCI0.SBUS.SMBI) (20140926/utaddress-258)
[ 8.435788] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.524972] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input5
[ 8.571862] [drm] Memory usable by graphics device = 2048M
[ 8.571868] checking generic (a0000000 410000) vs hw (a0000000 10000000)
[ 8.571870] fb: switching to inteldrmfb from EFI VGA
[ 8.571892] Console: switching to colour dummy device 80x25
[ 8.571969] [drm] Replacing VGA console driver
[ 8.590169] i915 0000:00:02.0: irq 48 for MSI/MSI-X
[ 8.590182] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 8.590184] [drm] Driver supports precise vblank timestamp query.
[ 8.590211] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 8.648474] fbcon: inteldrmfb (fb0) is primary device
[ 8.665898] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 8.665971] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 8.665996] [drm] Initialized i915 1.6.0 20140905 for 0000:00:02.0 on minor 0
[ 8.789354] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:0458:012B.0001/input/input7
[ 8.789415] hid-generic 0003:0458:012B.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:14.0-3/input0
[ 8.812071] media: Linux media interface: v0.10
[ 8.833777] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 8.840567] Linux video capture interface: v2.00
[ 8.897231] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (0c45:6514)
[ 8.929823] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input10
[ 8.929908] usbcore: registered new interface driver uvcvideo
[ 8.929909] USB Video Class driver (1.1.1)
[ 9.036891] cfg80211: Calling CRDA to update world regulatory domain
[ 9.056738] Bluetooth: Core ver 2.19
[ 9.056751] NET: Registered protocol family 31
[ 9.056751] Bluetooth: HCI device and connection manager initialized
[ 9.056757] Bluetooth: HCI socket layer initialized
[ 9.056758] Bluetooth: L2CAP socket layer initialized
[ 9.056766] Bluetooth: SCO socket layer initialized
[ 9.348730] usbcore: registered new interface driver btusb
[ 9.452303] iTCO_vendor_support: vendor-support=0
[ 9.452955] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 9.452990] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 9.453081] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.494632] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 9.494637] r8169 0000:08:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 9.501333] r8169 0000:08:00.0: irq 49 for MSI/MSI-X
[ 9.501800] r8169 0000:08:00.0 eth0: RTL8168g/8111g at 0xffffc90010788000, f0:76:1c:0c:12:99, XID 10900800 IRQ 49
[ 9.501802] r8169 0000:08:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 9.582307] rtl8723be: Using firmware rtlwifi/rtl8723befw.bin
[ 9.640127] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 9.640351] rtlwifi: rtlwifi: wireless switch is on
[ 9.653001] mousedev: PS/2 mouse device common for all mice
[ 9.667517] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x2a800, board id: 2848, fw id: 1581875
[ 9.686347] r8169 0000:08:00.0 enp8s0: renamed from eth0
[ 9.708662] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 9.727739] Console: switching to colour frame buffer device 170x48
[ 9.730327] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 9.730328] i915 0000:00:02.0: registered panic notifier
[ 9.737976] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[ 9.743445] AVX2 version of gcm_enc/dec engaged.
[ 9.743448] AES CTR mode by8 optimization enabled
[ 9.745577] snd_hda_intel 0000:00:03.0: irq 51 for MSI/MSI-X
[ 10.040841] sound hdaudioC1D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 10.040848] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 10.040851] sound hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 10.040852] sound hdaudioC1D0: mono: mono_out=0x0
[ 10.040854] sound hdaudioC1D0: inputs:
[ 10.040857] sound hdaudioC1D0: Mic=0x19
[ 10.040859] sound hdaudioC1D0: Internal Mic=0x12
[ 10.046345] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[ 10.046446] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[ 10.046909] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[ 10.047361] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input14
[ 10.047575] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[ 10.047649] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[ 10.097496] rtl8723be 0000:09:00.0 wlp9s0: renamed from wlan0
[ 10.655545] cfg80211: World regulatory domain updated:
[ 10.655549] cfg80211: DFS Master region: unset
[ 10.655550] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 10.655553] cfg80211: (2402000 KHz - 2472000 KHz @ 0 KHz), (N/A, 2000 mBm), (N/A)
[ 10.655555] cfg80211: (2457000 KHz - 2482000 KHz @ 0 KHz), (N/A, 2000 mBm), (N/A)
[ 10.655557] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.655559] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.655561] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 10.655563] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 10.655564] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.655566] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 10.732705] intel_rapl: Found RAPL domain package
[ 10.732711] intel_rapl: Found RAPL domain core
[ 10.732714] intel_rapl: Found RAPL domain uncore
[ 10.732717] intel_rapl: Found RAPL domain dram
[ 10.844302] Adding 4009760k swap on /dev/sda2. Priority:-1 extents:1 across:4009760k FS
[ 13.353211] systemd-journald[146]: Received request to flush runtime journal from PID 1
[ 18.647280] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.647284] Bluetooth: BNEP filters: protocol multicast
[ 18.647293] Bluetooth: BNEP socket layer initialized
[ 21.632791] r8169 0000:08:00.0 enp8s0: link down
[ 83.137005] wlp9s0: authenticate with 00:1d:7e:6a:c4:67
[ 83.729985] wlp9s0: send auth to 00:1d:7e:6a:c4:67 (try 1/3)
[ 83.731584] wlp9s0: authenticated
[ 83.731753] rtl8723be 0000:09:00.0 wlp9s0: disabling HT as WMM/QoS is not supported by the AP
[ 83.731757] rtl8723be 0000:09:00.0 wlp9s0: disabling VHT as WMM/QoS is not supported by the AP
[ 83.734174] wlp9s0: associate with 00:1d:7e:6a:c4:67 (try 1/3)
[ 83.737516] wlp9s0: RX AssocResp from 00:1d:7e:6a:c4:67 (capab=0x411 status=0 aid=3)
[ 83.737660] wlp9s0: associated
[astinx@compu ~]$ systemctl status
● compu
State: running
Jobs: 0 queued
Failed: 0 units
Since: dom 2015-02-08 13:47:04 ART; 24min ago
CGroup: /
├─1 /sbin/init
├─system.slice
│ ├─dbus.service
│ │ └─301 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation
│ ├─org.cups.cupsd.service
│ │ └─299 /usr/bin/cupsd -l
│ ├─ModemManager.service
│ │ └─303 /usr/bin/ModemManager
│ ├─wpa_supplicant.service
│ │ └─346 /usr/bin/wpa_supplicant -u
│ ├─lightdm.service
│ │ ├─314 /usr/bin/lightdm
│ │ └─329 /usr/bin/Xorg.bin :0 -seat seat0 -auth /run/lightdm/root/:0 -nolisten tcp vt1 -novtswitch
│ ├─accounts-daemon.service
│ │ └─331 /usr/lib/accountsserSo long I tried as Gusar said to loading the rtl8723b module with those params:
sudo modprobe rtl8723be fwlps=0
sudo modprobe rtl8723be ips=0
So far by now, the connection hasn't dropped (one hour since I made the change)
But is quite strange that when I do
[astinx@compu ~]$ more /sys/module/rtl8723be/parameters/ips
Y
I mean, the parameters changed or not? I also tried with setting with N instead of 0.
EDIT:
The drop downs come back shortly after. I find quite strange that I cannot manage the power from iwconfig
[astinx@compu ~]$ sudo iwconfig wlp9s0 power off
[sudo] password for astinx:
Error for wireless request "Set Power Management" (8B2C) :
SET failed on device wlp9s0 ; Operation not supported.
Last edited by astinx (2015-02-08 21:46:47) -
Mac OS X lion 10.7.3 Wi-Fi connection Drop Issue
Hi All,
I've iMAC OS X Lion 10.7.3 latest version desktop. For couple of months, I'm dealing with dropping wi-fi connection during working. I've look at all the forums and discussions and tried many things to solve the issuse, however, issue still exist.
Every a few minutes, even during surfing though internet pages, wi-fi connection drops. When you look at the signal level etc.. everything is seems to be fine, but it is not possible to connect internet after close-open wi-fi.
For a while, connection drop happens again.
I do not understand why Apple does not give a fix for this while most the customer having such an issue.
Any one having any idea how to solve this ?
Regards
GokcerI have a similar problem. My Macbook Pro won't keep a constant wi-fi connection, becuase it continues to seek alternative networks even after locking onto a strong signal. I've reset preferences and started from scratch with all the settings and let the Mac set them by itself, but still it does the seeking. At home I used to have a direct LAN into my Airport Extreme, but now I use wi-fi on 4G/LTE and I've tried the computer with and without the Airport Extreme, with and without a Cradlepoint, and with various channels and security levels.
As has been document probably hundreds of times in these forums, Macbook Pros (my model) and some other Macs have had this issue from either 10.7.2 or 10.7.3 (I've got 10.7.4 right now). I'm glad you found a solution to your problem, but for the hundreds or thousands of us who've had this problem since last August with no solution from Apple, it's quite frustrating. I know it's not politically correct to blame the computer when it's been given a defective upgrade with Lion, but let's call it what it is. I'll side with the numbers. Either a sudden batch of defective routers showed up from Taiwan, and a group of late 2008 and 2009 Macbook Pros bought them all en masse, or it's the software.
So if you still have problems after you get a clear signal, start sending messages to Apple to get it fixed for all of us. I bring this up for you as an alternative, as I noticed you were running 10.7.3, and the problems started somewhere around 10.7.2 or 10.7.3. Something to keep an eye on.
Maybe you are looking for
-
HT1918 remove credit card from account
I need help removing a credit card from my account!
-
WiFi: "no hardware installed" on Mac Mini, OS 10.8.5
I realize that there are many existing threads on this error message, but they all seem to be related to laptops with spesific affected hardware and not a Mac Mini. So: I have just gotten my mid 2011 Mac Mini back from service. They replaced a fauly
-
Please help me, I'm too much lost because I can not pass ParameterFields to the CrystallReportViewer, It always give me the error "Object reference not set to an instance of an object." Only simple report and only one ParameterFields . Nothing else:
-
I've tried: Tell application "Microsoft Word" insert rows at bottom of table 2 of active document end tell with no luck? I've also tried various oher permutations. Would some be able to help with this? Thanks
-
Every time i plug it into our desktop pc i get electric shocks when i hold the back of it or the camera or the loop holder. But its okay when i plug it into my laptop. I