Usb error message "USB over currnet notice" both usbs dont work.

Ive looked at many posts with my similar problem but nothing really answered it. I recently connected a digital camera with a usb cable. When I turned the camera on the error message came up that I "USB over current notice". I have a feeling that I might have burt the USB. Im not sure because i have been reading posts that say you can reset something, or might have to reinstall the operating system.
I would also like to mention that both USB's dont work. I plugged the camera in the USB closer to the user. The usb towards the back does not work at all. The one closer to me does do something. When I plug my ipod into that usb, the computer doesnt recognize it, and the ipod doesnt recognize that i plugged it in either. But when I unplug it from the computer, the ipod lights up recognizing that I have unplugged it.
It seems that it works very very little amount. Im thinking that I have a hardware problem. So does anyone know what it will cost, or what must be done to fix this problem. Not having a usb is not easy to live with.
Also, the firewire, camera, mousepad, keyboard and all that stuff works.

hi there-
the first thing i would try is resetting the macbook smc. http://docs.info.apple.com/article.html?artnum=303319 when you restart the computer, reset pram by holding apple-option-p-r until you hear two sets of startup chimes instead of the usual one. if this doesn't help and you need repair, it depends on the extent of the damage how much the repair will cost. if you phone Apple (1-800-275-2273) or take it to a store, they can give you estimates for different types of repairs, but of course no one can know precisely what parts are needed unless the computer is examined. best of luck. Sherry

Similar Messages

  • SL & USB error message

    I use this particular Mac as a workstation for Logic Pro. I have two USB cables connected to the computer. One is for a powered hub (hosting a midi interface and an iLok key) and the second is for an audio interface. These devices are plugged into a power strip. Before I finish a session, I turn off the power strip to which these devices are connected. I then get the following error message on the Mac:
    "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled. To prevent damaging your computer, the USB device drawing too much power has been disabled. Other devices may have also been disabled. When you disconnect the device drawing too much power, your other USG devices will be enabled again."
    Is this a problem? Am I doing the computer any harm? I'd rather not be reaching around the back of the iMac to unplug the USB cables every time I turn off the power strip if I don't have to.
    Thanks for any thoughts,
    Jim

    Hey DaddyPaycheck,
    Thanks for the reply. Here's what I do, in order.
    1. Quit Logic.
    2. Disconnect external hard drives.
    3. Turn off power strip to which the powered USB hub is connected. This is when I get the error message.
    So after I cut the power to the USB hub, is it the trying to draw power from the computer? I'm not sure where else I can connect the hub. The computer has a wireless keyboard, so no USB port there. And I could always disconnect by pulling the plug on the back of the machine (though being an iMac, it's a pain to get reconnected as everything is in the back and virtually invisible). My other option is to just leave the power strip on and say screw it.
    Jim

  • HT6001 After updated to iTunes 11.1.4 for windows vista , I was unable to open iTunes and it keep error message. My iphone unable to USB hotspot the internet to computer. Pls Help

    After updated to iTunes 11.1.4 for windows vista , I was unable to open iTunes and it keep error message. My iphone unable to USB hotspot the internet to computer. Pls Help

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • When I launch Firefox 4.0.1 I get an error message that says "We noticed your may have signed inor signed out in another window. Click Ok to reload your page." I have to sign in with my username and password. Richard

    When I launch Firefox 4.0.1 I get an error message that says "We noticed your may have signed inor signed out in another window. Click Ok to reload your page." I deleted Firefox and reloaded it - did not solve the problem. This started occurring after I downloaded Windows Service Pack 2. I have Vista 7 OS. So every time I close and relaunch Firefox, I have to sign in with my username and password. Very very, annoying. If I can't get this corrected, I have to start using another Browser. Thanks for your help. Richard

    It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
    Delete the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
    * Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    * http://kb.mozillazine.org/sessionstore.js
    If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.<br />
    Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
    See:
    * http://kb.mozillazine.org/Session_Restore

  • (When I launch Firefox 4.0.1 I get an error message that says "We noticed your may have signed inor signed out in another window. Click Ok to reload your page." Richard)

    <blockquote>Locking duplicate thread.<br>
    Please continue here: [/questions/830592]</blockquote><br>
    (When I launch Firefox 4.0.1 I get an error message that says "We noticed your may have signed inor signed out in another window. Click Ok to reload your page." I deleted Firefox and reloaded it - did not solve the problem. This started occurring after I downloaded Windows Service Pack 2. I have Vista 7 OS. So every time I close and relaunch Firefox, I have to sign in with my username and password. Very very, annoying. If I can't get this corrected, I have to start using another Browser. Thanks for your help. Richard)

    It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
    Delete the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
    * Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    * http://kb.mozillazine.org/sessionstore.js
    If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.<br />
    Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
    See:
    * http://kb.mozillazine.org/Session_Restore

  • Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

    Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

    what email service - Yahoo mail have been acting up lately
    you can try setting Mail as your email client - it resolves this pfoblem for some people
    LN

  • After upgrading to 10.7.5 some of my AU plugins can not be validated in Logic pro. (I got error message "Remove property listener". I can not work anymore. What should I do?

    After upgrading to 10.7.5 some of my AU plugins can not be validated in Logic pro. (I got error message "Remove property listener". I can not work anymore. What should I do?
    VIBAC

    I downloaded and installed
    OS X Lion 10.7.5 Supplemental Update
    and that solved my problem completely. (368 AU plugins now works!)

  • I recently upgraded to iCloud 3.0 on home computer and now i get error messages when I open Outlook 2010.  It worked fine before with iCloud 2.1.2.  Any solutions?  I'm on Windows 7, Outlook 2010.

    I recently upgraded to iCloud 3.0 on home computer and now i get error messages when I open Outlook 2010.  It worked fine before with iCloud 2.1.2.  Any solutions?  I'm on Windows 7, Outlook 2010.

    HOW FRUSTRATING! NOW WHAT IS HAPPENING? WHEN I GO TO ANY WEBSITE THE PAGE FREEZES. TOP OF PAGE READS, MOZILLA FIREFOX NOT RESPONDING, THINK I"LL GO BACK TO IE, WAY TOO MANY ERRORS AND NO TECH SUPPORT ANSWERS

  • Cant get my Outlook contacts and mail set up without crashing...error message is "Apple Outlook DAV config has stopped working"

    When I check the box to add Mail, Contacts, etc to iCloud, it goes through the setup about half way and crashes on the contacts. Error message is:
    "Apple Outlook DAV Config has stopped working"  Any suggestions? I can't get this stuff set up!  Thank you

    Hello Washit,
    Sorry to hear that you are getting the error message "Apple Outlook DAV Config has stopped working." 
    I recommend following the steps in the section titled "Troubleshooting iCloud Contacts update or setup issues with Microsoft Windows (Microsoft Outlook)" in the following article:
    iCloud: Troubleshooting iCloud Contacts
    http://support.apple.com/kb/ts3998
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Itunes on my PC displays an error message " This iphone cant be synced , you dont have enough privilege" everytime I start syncing thiss message shows up and everything stops. So , what to do now?

    Itunes on my PC displays an error message " This iphone cant be synced , you dont have enough privilege" everytime I start syncing thiss message shows up and everything stops. So , what to do now? even wifi sync isnt working and not able to sync files onto my iPhone.

    Try:
    Close iTunes, click the Start button > All Programs > iTunes folder > RIGHT CLICK iTunes Program icon > Select> Run as Administrator.

  • Got the error message ("Java(TM) Platform SE binary has stopped working")

    Hello Gurus,
    I installed java jdk1.6.0_24 in my laptop. After that i gave the command javac, i got the error message ("Java(TM) Platform SE binary has stopped working"). I willl highly appreciate any help on this.
    The OS on my laptop is Windows Vista Home Premium 64 bit.
    Thanks,
    Vish

    Vish,
    You may want to try one of the Java forums, as your question is specific to the JDK/JRE, and nothing to do with JDev/ADF. {forum:id=937} might be a good starting place.
    John

  • Error message: Adobe Flash Player 11.6 r602 stopped working and was closed

    I keep getting this error message: Adobe Flash Player 11.6 r602 stopped working and was closed.

    elmer33 wrote:
    I loggin by selecting "Run as Administrator".  Does this qualify as being logged-in as Admministrator?   If so, this still does not allow deletion of the intended file.
    Thanks for your suggestions.
    Use File Assassin. If it can't remove it. it CAN'T BE REMOVED.

  • Burned iMovie on DVD R DL (8.5GB) get error message trying to play in DVD player, but works in the laptops any help would be appreciated. Doing this for my sons graduation. Thank you for your time.

    Burned iMovie on DVD R DL (8.5GB) get error message trying to play in DVD player, but works in the laptops any help would be appreciated. Doing this for my sons graduation. Thank you for your time.

    You would need to have burned the disc using iDVD or a third-party application such as Toast. Is that what you did?

  • I can't connect to Time Capsule- error message: Backup disk is not available. Was working fine before.

    I can't connect to Time Capsule- error message: Backup disk is not available. Was working fine before.

    Restart it.. Does this all the time with Lion and even worse ML.
    Restart the whole network if that doesn't work.. do it in correct order.. from off.. modem.. TC.. clients 2min gap.

  • USB error message deactivating my printer

    Hi,
    I'm a recent convert to Mac and I'm glad I made the witch. It's been plain sailing with only one niggly problem.
    When I power up an error message tells me " USB over current notice. ! A USB device is currently drawing too much power. The hub it is attached to will be deactivated."
    In order to logon I have to press OK to the above and it then deactivates my printer. I receive the error message even when a USB is not connected.
    I would appeciate any advice to solve this.
    Thanks,
    Finn

    What brand and model is the router?
    Also, is the wireless light a flashing blue light or a solid blue light?
    Press the wireless button and go to settings>printer report>test report.  Does it show anything as failed?  If so, what items are listed?
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Maybe you are looking for

  • Remote Desktop connection from Macbook to Win 2012 TS

    One of our users purchased a new Macbook (OS X Yosemite) and installed the MS Remote Desktop app to do work from home.  We've been trying to connect, we get to the logon screen, but there is a message that the user does not have Allow Logon through T

  • OWB10.1.0.4 and Oracle 10.2.0.3 databse target instance?

    We have Oracle 10.2.0.2 as both source and target instance, and OWB 10.1.0.4. We are planning on upgrading Oracle database to 10.2.0.3. My question is, Will OWB 10.1.0.4 support Oracle database 10.2.0.3 as target instance? Please let me know Thanks!

  • Xpath and xml data queries

    I've got the xml found at: http://www.bankofcanada.ca/rss/fx/noon/fx-noon-all.xml. The xml looks like this(this is the US only one, but all the format and syntax is the same for the fx-noon-all.xml file): <?xml version="1.0" encoding="ISO-8859-1"?> <

  • What is my account name

    hello, i actully login from Microsoft acocunt ( hotmail) so i wanna know that how i will know my accout name to others so they can find me?  Thanks.. Please Reply

  • Error in update rules when trying to add a field

    Hi Gurus, I would appreciate if u could help me out. I am trying to add the field Cumulative order quantity in sales unit ( 0CML_OR_QTY) in the update rule of 2LIS_11_VAITM. The field already exists in transfer rule and communication structure. When