USB Headset not working with alsa

I have a razer megalodon usb headset which works fine in ubuntu and windows but for the life of me I cannot get it to work in arch.
[exec@turbine ~]$ uname -a
Linux turbine 2.6.34-ARCH #1 SMP PREEMPT Mon Jul 5 22:12:11 CEST 2010 x86_64 Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz GenuineIntel GNU/Linux
1532:000e is the megalodon headset
[exec@turbine ~]$ lsusb
Bus 008 Device 004: ID 1532:000e Razer USA, Ltd
Bus 008 Device 003: ID 1532:000f Razer USA, Ltd
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 045e:028e Microsoft Corp. Xbox360 Controller
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 004: ID 046d:c227 Logitech, Inc.
Bus 004 Device 003: ID 046d:c226 Logitech, Inc.
Bus 004 Device 002: ID 046d:c223 Logitech, Inc. G15 Keyboard / USB Hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 1058:1001 Western Digital Technologies, Inc. External Hard Disk [Elements]
Bus 001 Device 002: ID 13fe:3100 Kingston Technology Company Inc. 2 GB USB stick
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[exec@turbine ~]$ aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
default:CARD=Intel
HDA Intel, ALC888 Analog
Default Audio Device
front:CARD=Intel,DEV=0
HDA Intel, ALC888 Analog
Front speakers
surround40:CARD=Intel,DEV=0
HDA Intel, ALC888 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
HDA Intel, ALC888 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
HDA Intel, ALC888 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
HDA Intel, ALC888 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
HDA Intel, ALC888 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Intel,DEV=0
HDA Intel, ALC888 Digital
IEC958 (S/PDIF) Digital Audio Output
Here's a relevant part of dmesg:
usb 8-1: USB disconnect, address 2
usb 8-1: new full speed USB device using uhci_hcd and address 4
cannot find the slot for index 0 (range 0-1), error: -16
cannot create card instance 0
snd-usb-audio: probe of 8-1:1.0 failed with error -5
[exec@turbine ~]$ asoundconf list
Names of available sound cards:
Intel
# /etc/modprobe.d/modprobe.conf (for v2.6 kernels)
alias snd-card-0 snd-usb-audio
alias snd-card-1 snd-hda-intel
# /etc/modprobe.d/sound.conf
#usb headset
alias snd-card-0 snd-usb-audio
alias sound-slot-0 snd-usb-audio
options snd-usb-audio index=0
Alsamixer does not show my megalodon usually but I have seen it under device list a couple of times but I have been unable to get it to play sound.
Any help fixing sound would be appreciated greatly.

Try running alsaconf, seems to help some people with a similar issue. http://www.nvnews.net/vbulletin/showthread.php?t=75433

Similar Messages

  • USB Mouse not work with Mac OS 10.6

    I have a USB mouse can work with Mac OS 10.4 but cannot with Mac OS 10.6. Noticed the different is the USB mouse motion reporting is 12-bit instead of 8-bit. It can definitely work on Windows with standard USB HID driver. I wonder if the OS 10.6 is having a different USB HID driver specification which is not posted in USB-IF.

    Ask the Vendor.

  • USB superdrive not working with Mac Pro

    Is there a trick to getting a USB Superdrive working with a Macpro?
    The drive in the Macpro no longer ejects and have tried connecting the USB drive to both the front and back ports - does it not work with Mac Pros?
    Any pointers in the right direction would be much appreciated.

    I had a problem my superdrive. It would play dvd's and cd's that were already burnt but would not burn blank DVDs or CDs- in the recent past it had no problems burning. In addition, the Finder would not display the superdrive. When I put a blank disc in it would go to Disk Utilities and would not allow burning. With help from Apple I discovered the problem-- The settings in CDS & DVDs had been changed from When you insert a blank DVD/CD "Ask what to do to  to  "GO to Disk Utilities". If this sounds like your problem try changing the settings to this:
    Try going to; System Preferences/ CDs & DVDs
    Change these two settings to this:
    When you insert a blank CD: Ask what to do
    When you insert a blank DVD: Ask what to do
    NOTE: If they are already set to this you probably have a different problem. If they are set to Go to Disk Utilitiy this is probably a solution.
    And
    Then go to Finder Preferences
    Make sure that under "Show these items on desktop:" that the checkbox for CDs, DVDs, and iPods is checked.
    Try to burn the DVD again (reload Disc- perhaps restart) and try again.
    Don't know how these setting changed but they did. It worked for me.
    Message was edited by: pj176

  • Bluetooth headset not working with 2008 Macbook!

    Hello,
    I just got a new Macbook and love it!
    But, the other day I tried out my Bluetooth headset and the A2DP headphone choice works great.
    But when I change it to headset for use with skype I can hear the person but all they hear is weird repeating static. I listened to myself with skype call testing service and it sounds bad. I looked in preferences of sound and most of the sound bars are purple and moving as if
    i am yelling into the microphone. I know it is not the headset for it works with my cellphone and eMac.
    Anything I do to the headset doesn't solve this or even brake the pattern in the purple bars.
    I turned off the headset when it was showing these bars and they kept going.
    It is not the headset. The Macbook is capable of receiving files through Bluetooth so it is not the input of Bluetooth that is the problem.
    Also, when I first started the microphone of the headset it was clear then after a couple seconds it started to drown out my voice then it was gone, replaced by shhhhhhchhh.
    My headset is a Plantronics 590E.
    Thanks,
    MIBM

    Yes, thank you.
    I was recently on Vacation and scheduled a Genius Bar visit and they tested my headset with another Macbook and same thing. I am very mad at Apple after finding this out. I had a feeling it was drivers or something but obviously could not test seeing as I only have one computer running Leopard, eMac runs Tiger. I actually have a third party bluetooth dongle working with my eMac. It is an Iogear dongle and on the box it says all features work with Mac and then I plugged it in and was unable to turn on/off and couldn't use headsets, then after hours of research I found a forum and downloaded a Broadcom driver and voila! it worked. That is also why I wasn't sure if it was a driver problem or hardware.
    If anyone needs a tutorial and the driver for a broadcom bluetooth USB dongle I would be happy to help.
    Thanks,
    MIBM

  • Acer C710 - USB Ports not working with patched kernel

    I have an...
    Acer C710-844G01ii
    I have replaced the original SSD with a Mushkin 120GB SSD (MKNSSDCR120GB-7)
    I've used John Lewis' script at https://johnlewis.ie to flash the firmware. It works great. It loads 64 bit dual arch iso (2014.10.01) written to a USB flashdrive (Well, I'm actually using SD card in a USB reader. Not sure if that makes a difference) without having to utilize the workaround listed on the Chromebook wiki page (https://wiki.archlinux.org/index.php/Ch … stallation). I just create a regular arch bootable usb and it seems to work fine. I can use the bootable USB tools. I can install arch to the hard disk fine. (I did this a couple of times on the original SSD that came with the chromebook before I replaced it, so I know it works without having to change the SSD).
    The problem I'm having occurs after I install the patched kernel (linux-chromebook-3.16.4-1-x86_64 or linux-mainline-chromebook-3.17-1-x86_64 I've tried them both. Both times I wiped the hard drive and went through the entire install process from scratch). After booting, everything loads up fine except that I lose functionality of my USB ports. The custom BIOS still reads the arch bootable USB if I choose to boot into it. If I boot from the hard drive though, as soon as the patched kernel loads, the USB ports are not working.
    The output of
    dmesg | tail
    is the same before and after inserting a flash drive into a usb port.
    Running the command
    lsusb
    gives output
    unable to initialize libusb: -99

    Updated the system, now using arch kernel 3.17.1-1
    Problem still exists.
    dmesg
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.17.1-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Oct 15 15:04:35 CEST 2014
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=572dffe4-4501-4df5-967f-c535313cfa24 rw quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000acee3fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000acee4000-0x00000000af9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014f5fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: Google Parrot/Parrot, BIOS 4.0-6588-g4acd8ea-dirty 09/04/2014
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x14f600 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: write-back
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-back
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0AD000000 mask FFF000000 uncachable
    [ 0.000000] 1 base 0AE000000 mask FFE000000 uncachable
    [ 0.000000] 2 base 0B0000000 mask FF0000000 uncachable
    [ 0.000000] 3 base 0C0000000 mask FF0000000 uncachable
    [ 0.000000] 4 base 0D0000000 mask FF0000000 write-combining
    [ 0.000000] 5 base 0E0000000 mask FE0000000 uncachable
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0xacee4 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
    [ 0.000000] reserving inaccessible SNB gfx pages
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b2f000, 0x01b2ffff] PGTABLE
    [ 0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
    [ 0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x14f400000-0x14f5fffff]
    [ 0.000000] [mem 0x14f400000-0x14f5fffff] page 2M
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x14c000000-0x14f3fffff]
    [ 0.000000] [mem 0x14c000000-0x14f3fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x14bffffff]
    [ 0.000000] [mem 0x100000000-0x14bffffff] page 2M
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
    [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x40200000-0xacee3fff]
    [ 0.000000] [mem 0x40200000-0xacdfffff] page 2M
    [ 0.000000] [mem 0xace00000-0xacee3fff] page 4k
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] RAMDISK: [mem 0x379a0000-0x37cc7fff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x00000000000F6DD0 000024 (v02 CORE )
    [ 0.000000] ACPI: XSDT 0x00000000ACFEF0E0 00004C (v01 CORE COREBOOT 00000000 CORE 00000000)
    [ 0.000000] ACPI: FACP 0x00000000ACFF2720 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000001)
    [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20140724/tbfadt-618)
    [ 0.000000] ACPI: DSDT 0x00000000ACFEF250 0034C7 (v02 COREv4 COREBOOT 20110725 INTL 20140114)
    [ 0.000000] ACPI: FACS 0x00000000ACFEF210 000040
    [ 0.000000] ACPI: HPET 0x00000000ACFF2820 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
    [ 0.000000] ACPI: APIC 0x00000000ACFF2860 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
    [ 0.000000] ACPI: MCFG 0x00000000ACFF28C0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
    [ 0.000000] ACPI: SSDT 0x00000000ACFF3900 000818 (v02 CORE COREBOOT 0000002A CORE 0000002A)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000014f5fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x14f5fffff]
    [ 0.000000] NODE_DATA [mem 0x14f5fa000-0x14f5fdfff]
    [ 0.000000] [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014ac00000-ffff88014ebfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x14f5fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009efff]
    [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
    [ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
    [ 0.000000] node 0: [mem 0x40200000-0xacee3fff]
    [ 0.000000] node 0: [mem 0x100000000-0x14f5fffff]
    [ 0.000000] On node 0 totalpages: 1032322
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 158 pages reserved
    [ 0.000000] DMA zone: 3998 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 10988 pages used for memmap
    [ 0.000000] DMA32 zone: 703204 pages, LIFO batch:31
    [ 0.000000] Normal zone: 5080 pages used for memmap
    [ 0.000000] Normal zone: 325120 pages, LIFO batch:31
    [ 0.000000] Reserving Intel graphics stolen memory at 0xada00000-0xaf9fffff
    [ 0.000000] ACPI: PM-Timer IO Port: 0x508
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xacee4000-0xaf9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xafa00000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff]
    [ 0.000000] e820: [mem 0xafa00000-0xefffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88014f200000 s86848 r8192 d23744 u1048576
    [ 0.000000] pcpu-alloc: s86848 r8192 d23744 u1048576 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1016032
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=572dffe4-4501-4df5-967f-c535313cfa24 rw quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240 using standard form
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3981852K/4129288K available (5381K kernel code, 909K rwdata, 1712K rodata, 1140K init, 1176K bss, 147436K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
    [ 0.000000] NR_IRQS:8448 nr_irqs:440 0
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 16777216 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 1097.469 MHz processor
    [ 0.000073] Calibrating delay loop (skipped), value calculated using timer frequency.. 2195.39 BogoMIPS (lpj=3658230)
    [ 0.000078] pid_max: default: 32768 minimum: 301
    [ 0.000089] ACPI: Core revision 20140724
    [ 0.005690] ACPI: All ACPI Tables successfully acquired
    [ 0.008808] Security Framework initialized
    [ 0.008819] Yama: becoming mindful.
    [ 0.009391] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.011193] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.012001] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.012017] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.012360] Initializing cgroup subsys memory
    [ 0.012370] Initializing cgroup subsys devices
    [ 0.012374] Initializing cgroup subsys freezer
    [ 0.012378] Initializing cgroup subsys net_cls
    [ 0.012382] Initializing cgroup subsys blkio
    [ 0.012420] CPU: Physical Processor ID: 0
    [ 0.012422] CPU: Processor Core ID: 0
    [ 0.012432] mce: CPU supports 7 MCE banks
    [ 0.012454] CPU0: Thermal monitoring enabled (TM1)
    [ 0.012472] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
    [ 0.012675] Freeing SMP alternatives memory: 20K (ffffffff81a02000 - ffffffff81a07000)
    [ 0.014781] ftrace: allocating 20674 entries in 81 pages
    [ 0.037109] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.070117] smpboot: CPU0: Intel(R) Celeron(R) CPU 847 @ 1.10GHz (fam: 06, model: 2a, stepping: 07)
    [ 0.070132] TSC deadline timer enabled
    [ 0.070178] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
    [ 0.070223] ... version: 3
    [ 0.070226] ... bit width: 48
    [ 0.070228] ... generic registers: 8
    [ 0.070230] ... value mask: 0000ffffffffffff
    [ 0.070232] ... max period: 0000ffffffffffff
    [ 0.070234] ... fixed-purpose events: 3
    [ 0.070237] ... event mask: 00000007000000ff
    [ 0.090307] x86: Booting SMP configuration:
    [ 0.090312] .... node #0, CPUs: #1
    [ 0.103535] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.103559] x86: Booted up 1 node, 2 CPUs
    [ 0.103563] smpboot: Total of 2 processors activated (4391.78 BogoMIPS)
    [ 0.105926] devtmpfs: initialized
    [ 0.112736] pinctrl core: initialized pinctrl subsystem
    [ 0.112812] RTC time: 0:25:43, date: 10/27/14
    [ 0.112986] NET: Registered protocol family 16
    [ 0.113224] cpuidle: using governor ladder
    [ 0.113230] cpuidle: using governor menu
    [ 0.113291] ACPI: bus type PCI registered
    [ 0.113295] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.113438] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
    [ 0.113443] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
    [ 0.113650] PCI: Using configuration type 1 for base access
    [ 0.124189] ACPI: Added _OSI(Module Device)
    [ 0.124193] ACPI: Added _OSI(Processor Device)
    [ 0.124196] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.124199] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.130313] ACPI: Interpreter enabled
    [ 0.130327] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
    [ 0.130336] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
    [ 0.130364] ACPI: (supports S0 S3 S4 S5)
    [ 0.130367] ACPI: Using IOAPIC for interrupt routing
    [ 0.130407] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.136949] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.136960] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.137053] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
    [ 0.137240] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cedff])
    [ 0.137249] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
    [ 0.137502] PCI host bridge to bus 0000:00
    [ 0.137507] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.137512] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.137515] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.137519] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.137523] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
    [ 0.137526] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
    [ 0.137529] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
    [ 0.137533] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.137536] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.137540] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.137543] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.137547] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 0.137550] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 0.137553] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
    [ 0.137557] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
    [ 0.137560] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
    [ 0.137564] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfebfffff]
    [ 0.137567] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
    [ 0.137583] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
    [ 0.137752] pci 0000:00:02.0: [8086:0106] type 00 class 0x030000
    [ 0.137774] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
    [ 0.137786] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.137796] pci 0000:00:02.0: reg 0x20: [io 0x1000-0x103f]
    [ 0.138004] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    [ 0.138046] pci 0000:00:16.0: reg 0x10: [mem 0xe0706100-0xe070610f 64bit]
    [ 0.138188] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.138353] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    [ 0.138392] pci 0000:00:1a.0: reg 0x10: [mem 0xe0705800-0xe0705bff]
    [ 0.138555] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.138624] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.138714] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    [ 0.138746] pci 0000:00:1b.0: reg 0x10: [mem 0xe0700000-0xe0703fff 64bit]
    [ 0.138900] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.138967] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.139051] pci 0000:00:1c.0: [8086:1e12] type 01 class 0x060400
    [ 0.139207] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.139354] pci 0000:00:1c.1: [8086:1e14] type 01 class 0x060400
    [ 0.139506] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.139671] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    [ 0.139708] pci 0000:00:1d.0: reg 0x10: [mem 0xe0705c00-0xe0705fff]
    [ 0.139869] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.139938] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.140021] pci 0000:00:1f.0: [8086:1e5f] type 00 class 0x060100
    [ 0.140331] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
    [ 0.140373] pci 0000:00:1f.2: reg 0x10: [io 0x1060-0x1067]
    [ 0.140391] pci 0000:00:1f.2: reg 0x14: [io 0x1070-0x1073]
    [ 0.140409] pci 0000:00:1f.2: reg 0x18: [io 0x1068-0x106f]
    [ 0.140427] pci 0000:00:1f.2: reg 0x1c: [io 0x1074-0x1077]
    [ 0.140444] pci 0000:00:1f.2: reg 0x20: [io 0x1040-0x105f]
    [ 0.140461] pci 0000:00:1f.2: reg 0x24: [mem 0xe0705000-0xe07057ff]
    [ 0.140568] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.140707] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
    [ 0.140738] pci 0000:00:1f.3: reg 0x10: [mem 0xe0706000-0xe07060ff 64bit]
    [ 0.140781] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
    [ 0.140941] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
    [ 0.140981] pci 0000:00:1f.6: reg 0x10: [mem 0xe0704000-0xe0704fff 64bit]
    [ 0.141361] pci 0000:01:00.0: [168c:0034] type 00 class 0x028000
    [ 0.141432] pci 0000:01:00.0: reg 0x10: [mem 0xe0400000-0xe047ffff 64bit]
    [ 0.141586] pci 0000:01:00.0: reg 0x30: [mem 0xe0480000-0xe048ffff pref]
    [ 0.141772] pci 0000:01:00.0: supports D1 D2
    [ 0.141776] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.146966] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.146982] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff]
    [ 0.147186] pci 0000:02:00.0: [14e4:16b5] type 00 class 0x020000
    [ 0.147261] pci 0000:02:00.0: reg 0x10: [mem 0xe0500000-0xe050ffff 64bit pref]
    [ 0.147314] pci 0000:02:00.0: reg 0x18: [mem 0xe0510000-0xe051ffff 64bit pref]
    [ 0.147412] pci 0000:02:00.0: reg 0x30: [mem 0xe0600000-0xe06007ff pref]
    [ 0.147646] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 0.147839] pci 0000:02:00.1: [14e4:16bc] type 00 class 0x080501
    [ 0.147913] pci 0000:02:00.1: reg 0x10: [mem 0xe0520000-0xe052ffff 64bit pref]
    [ 0.148270] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
    [ 0.153657] pci 0000:00:1c.1: PCI bridge to [bus 02]
    [ 0.153672] pci 0000:00:1c.1: bridge window [mem 0xe0600000-0xe06fffff]
    [ 0.153686] pci 0000:00:1c.1: bridge window [mem 0xe0500000-0xe05fffff 64bit pref]
    [ 0.153903] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
    [ 0.153995] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10, disabled.
    [ 0.154081] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
    [ 0.154165] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15), disabled.
    [ 0.154248] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
    [ 0.154330] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 0.154413] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 0.154495] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 0.155375] ACPI: Enabled 1 GPEs in block 00 to 3F
    [ 0.155452] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 0.155654] vgaarb: setting as boot device: PCI:0000:00:02.0
    [ 0.155658] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.155664] vgaarb: loaded
    [ 0.155666] vgaarb: bridge control possible 0000:00:02.0
    [ 0.155751] PCI: Using ACPI for IRQ routing
    [ 0.159478] PCI: pci_cache_line_size set to 64 bytes
    [ 0.159577] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
    [ 0.159581] e820: reserve RAM buffer [mem 0xacee4000-0xafffffff]
    [ 0.159584] e820: reserve RAM buffer [mem 0x14f600000-0x14fffffff]
    [ 0.159796] NetLabel: Initializing
    [ 0.159799] NetLabel: domain hash size = 128
    [ 0.159801] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.159829] NetLabel: unlabeled traffic allowed by default
    [ 0.159874] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.159885] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.161931] Switched to clocksource hpet
    [ 0.171668] pnp: PnP ACPI init
    [ 0.171847] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.171852] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.171857] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.171861] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.171865] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
    [ 0.171869] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.171873] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 0.171877] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.171881] system 00:00: [mem 0x20000000-0x201fffff] has been reserved
    [ 0.171885] system 00:00: [mem 0x40000000-0x401fffff] has been reserved
    [ 0.171891] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.172584] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
    [ 0.172590] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
    [ 0.172671] system 00:02: [io 0x0500-0x057f] could not be reserved
    [ 0.172676] system 00:02: [io 0x0480-0x04bf] has been reserved
    [ 0.172681] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.172727] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.172802] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.172844] pnp: PnP ACPI: found 5 devices
    [ 0.181140] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.181153] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff]
    [ 0.181169] pci 0000:00:1c.1: PCI bridge to [bus 02]
    [ 0.181179] pci 0000:00:1c.1: bridge window [mem 0xe0600000-0xe06fffff]
    [ 0.181187] pci 0000:00:1c.1: bridge window [mem 0xe0500000-0xe05fffff 64bit pref]
    [ 0.181201] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.181205] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.181209] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.181212] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
    [ 0.181216] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
    [ 0.181219] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
    [ 0.181223] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
    [ 0.181226] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
    [ 0.181230] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
    [ 0.181233] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
    [ 0.181237] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
    [ 0.181240] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
    [ 0.181243] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
    [ 0.181247] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
    [ 0.181250] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff]
    [ 0.181254] pci_bus 0000:00: resource 19 [mem 0xafa00000-0xfebfffff]
    [ 0.181257] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff]
    [ 0.181262] pci_bus 0000:01: resource 1 [mem 0xe0400000-0xe04fffff]
    [ 0.181266] pci_bus 0000:02: resource 1 [mem 0xe0600000-0xe06fffff]
    [ 0.181269] pci_bus 0000:02: resource 2 [mem 0xe0500000-0xe05fffff 64bit pref]
    [ 0.181319] NET: Registered protocol family 2
    [ 0.181671] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
    [ 0.181835] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
    [ 0.181980] TCP: Hash tables configured (established 32768 bind 32768)
    [ 0.182017] TCP: reno registered
    [ 0.182031] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.182066] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.182162] NET: Registered protocol family 1
    [ 0.182192] pci 0000:00:02.0: Video device with shadowed ROM
    [ 0.182773] PCI: CLS 64 bytes, default 64
    [ 0.182860] Unpacking initramfs...
    [ 0.302677] Freeing initrd memory: 3232K (ffff8800379a0000 - ffff880037cc8000)
    [ 0.302693] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.302698] software IO TLB [mem 0xa8ee4000-0xacee4000] (64MB) mapped at [ffff8800a8ee4000-ffff8800acee3fff]
    [ 0.302960] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
    [ 0.303038] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
    [ 0.303051] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
    [ 0.303148] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 0.303201] Scanning for low memory corruption every 60 seconds
    [ 0.303637] futex hash table entries: 512 (order: 3, 32768 bytes)
    [ 0.303657] Initialise system trusted keyring
    [ 0.304287] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.307213] zpool: loaded
    [ 0.307219] zbud: loaded
    [ 0.307572] VFS: Disk quotas dquot_6.5.2
    [ 0.307644] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.307867] msgmni has been set to 7783
    [ 0.307975] Key type big_key registered
    [ 0.308262] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.308317] io scheduler noop registered
    [ 0.308322] io scheduler deadline registered
    [ 0.308380] io scheduler cfq registered (default)
    [ 0.308697] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
    [ 0.308978] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
    [ 0.309161] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    [ 0.309165] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
    [ 0.309172] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    [ 0.309208] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
    [ 0.309212] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
    [ 0.309215] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
    [ 0.309223] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
    [ 0.309253] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.309285] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.309344] vesafb: mode is 1366x768x32, linelength=5504, pages=0
    [ 0.309346] vesafb: scrolling: redraw
    [ 0.309350] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.309380] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004780000, using 4160k, total 4160k
    [ 0.315773] Console: switching to colour frame buffer device 170x48
    [ 0.321847] fb0: VESA VGA frame buffer device
    [ 0.321882] intel_idle: MWAIT substates: 0x21120
    [ 0.321884] intel_idle: v0.4 model 0x2A
    [ 0.321887] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.322122] GHES: HEST is not enabled!
    [ 0.322261] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.323099] Linux agpgart interface v0.103
    [ 0.323175] rtc_cmos 00:03: RTC can wake from S4
    [ 0.323405] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [ 0.323444] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 0.323464] Intel P-state driver initializing.
    [ 0.323700] ledtrig-cpu: registered to indicate activity on CPUs
    [ 0.323974] TCP: cubic registered
    [ 0.324249] NET: Registered protocol family 10
    [ 0.324810] NET: Registered protocol family 17
    [ 0.325630] Loading compiled-in X.509 certificates
    [ 0.325667] registered taskstats version 1
    [ 0.326469] Magic number: 2:425:406
    [ 0.326624] rtc_cmos 00:03: setting system clock to 2014-10-27 00:25:43 UTC (1414369543)
    [ 0.326771] PM: Hibernation image not present or could not be loaded.
    [ 0.328979] Freeing unused kernel memory: 1140K (ffffffff818e5000 - ffffffff81a02000)
    [ 0.328984] Write protecting the kernel read-only data: 8192k
    [ 0.334234] Freeing unused kernel memory: 752K (ffff880001544000 - ffff880001600000)
    [ 0.336362] Freeing unused kernel memory: 336K (ffff8800017ac000 - ffff880001800000)
    [ 0.352574] random: systemd-tmpfile urandom read with 1 bits of entropy available
    [ 0.355532] systemd-udevd[47]: starting version 216
    [ 0.387858] ACPI: bus type USB registered
    [ 0.387913] usbcore: registered new interface driver usbfs
    [ 0.387936] usbcore: registered new interface driver hub
    [ 0.388039] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    [ 0.388042] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [ 0.391270] usbcore: registered new device driver usb
    [ 0.392129] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.392223] sdhci: Secure Digital Host Controller Interface driver
    [ 0.392228] sdhci: Copyright(c) Pierre Ossman
    [ 0.392414] ehci-pci: EHCI PCI platform driver
    [ 0.392656] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 0.392671] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 0.392674] sdhci-pci 0000:02:00.1: SDHCI controller found [14e4:16bc] (rev 10)
    [ 0.392714] ehci-pci 0000:00:1a.0: debug port 2
    [ 0.393158] sdhci-pci 0000:02:00.1: No vmmc regulator found
    [ 0.393163] sdhci-pci 0000:02:00.1: No vqmmc regulator found
    [ 0.395522] mmc0: SDHCI controller on PCI [0000:02:00.1] using ADMA
    [ 0.397372] SCSI subsystem initialized
    [ 0.400613] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 0.400649] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe0705800
    [ 0.402598] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.402906] libata version 3.00 loaded.
    [ 0.408631] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 0.408994] hub 1-0:1.0: USB hub found
    [ 0.409010] hub 1-0:1.0: 3 ports detected
    [ 0.409474] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 0.409486] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 0.409509] ehci-pci 0000:00:1d.0: debug port 2
    [ 0.413433] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 0.413449] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe0705c00
    [ 0.421967] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 0.422311] hub 2-0:1.0: USB hub found
    [ 0.422325] hub 2-0:1.0: 3 ports detected
    [ 0.422611] ahci 0000:00:1f.2: version 3.0
    [ 0.422819] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X
    [ 0.422858] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
    [ 0.422890] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
    [ 0.422896] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
    [ 0.425306] scsi host0: ahci
    [ 0.427777] scsi host1: ahci
    [ 0.430423] scsi host2: ahci
    [ 0.431139] scsi host3: ahci
    [ 0.431256] ata1: SATA max UDMA/133 abar m2048@0xe0705000 port 0xe0705100 irq 26
    [ 0.431260] ata2: DUMMY
    [ 0.431262] ata3: DUMMY
    [ 0.431265] ata4: DUMMY
    [ 0.475720] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.715469] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 0.748738] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 0.760911] ata1.00: ATA-8: MKNSSDCR120GB-7, 582ABBF0, max UDMA/133
    [ 0.760921] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
    [ 0.770881] ata1.00: configured for UDMA/133
    [ 0.771363] scsi 0:0:0:0: Direct-Access ATA MKNSSDCR120GB-7 BBF0 PQ: 0 ANSI: 5
    [ 0.782066] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
    [ 0.782627] sd 0:0:0:0: [sda] Write Protect is off
    [ 0.782637] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 0.782810] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 0.785152] sda: sda1 sda2 sda3
    [ 0.786014] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 0.839907] hub 1-1:1.0: USB hub found
    [ 0.840119] hub 1-1:1.0: 4 ports detected
    [ 0.935913] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 0.945475] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 1.069643] hub 2-1:1.0: USB hub found
    [ 1.069827] hub 2-1:1.0: 4 ports detected
    [ 1.148949] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
    [ 1.233928] usb 1-1.1: string descriptor 0 read error: -22
    [ 1.290134] EXT4-fs (sda1): re-mounted. Opts: data=ordered
    [ 1.305272] tsc: Refined TSC clocksource calibration: 1097.506 MHz
    [ 1.315437] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
    [ 1.344309] systemd-udevd[136]: starting version 216
    [ 1.352295] systemd-journald[119]: Received request to flush runtime journal from PID 1
    [ 1.607498] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 1.610413] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
    [ 1.610471] ACPI: Lid Switch [LID0]
    [ 1.610565] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
    [ 1.610572] ACPI: Power Button [PWRB]
    [ 1.610653] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
    [ 1.610657] ACPI: Sleep Button [TPAD]
    [ 1.610758] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 1.610763] ACPI: Power Button [PWRF]
    [ 1.626490] mei_me 0000:00:16.0: irq 27 for MSI/MSI-X
    [ 1.645724] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 1.645942] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
    [ 1.653739] thermal LNXTHERM:00: registered as thermal_zone0
    [ 1.653745] ACPI: Thermal Zone [THRM] (0 C)
    [ 1.660772] [Firmware Bug]: battery: (dis)charge rate invalid.
    [ 1.665282] ACPI: Battery Slot [BATX] (battery present)
    [ 1.666038] ACPI: AC Adapter [AC] (on-line)
    [ 1.681337] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\PMIO) (20140724/utaddress-258)
    [ 1.681351] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 1.681358] ACPI Warning: SystemIO range 0x00000000000004c0-0x00000000000004cf conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20140724/utaddress-258)
    [ 1.681364] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 1.681367] ACPI Warning: SystemIO range 0x00000000000004b0-0x00000000000004bf conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20140724/utaddress-258)
    [ 1.681374] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 1.681376] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004af conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20140724/utaddress-258)
    [ 1.681382] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 1.681385] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 1.688249] [drm] Initialized drm 1.1.0 20060810
    [ 1.691201] pps_core: LinuxPPS API ver. 1 registered
    [ 1.691207] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
    [ 1.700706] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
    [ 1.701200] PTP clock support registered
    [ 1.706524] input: PC Speaker as /devices/platform/pcspkr/input/input6
    [ 1.752871] tg3.c:v3.137 (May 11, 2014)
    [ 1.753314] Adding 8167872k swap on /dev/sda2. Priority:-1 extents:1 across:8167872k SSFS
    [ 1.757127] Bluetooth: Core ver 2.19
    [ 1.757151] NET: Registered protocol family 31
    [ 1.757154] Bluetooth: HCI device and connection manager initialized
    [ 1.757166] Bluetooth: HCI socket layer initialized
    [ 1.757170] Bluetooth: L2CAP socket layer initialized
    [ 1.757180] Bluetooth: SCO socket layer initialized
    [ 1.771585] usbcore: registered new interface driver btusb
    [ 1.771864] snd_hda_intel 0000:00:1b.0: irq 28 for MSI/MSI-X
    [ 1.777240] cfg80211: Calling CRDA to update world regulatory domain
    [ 1.812626] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
    [ 1.812635] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 1.812640] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
    [ 1.812643] sound hdaudioC0D0: mono: mono_out=0x0
    [ 1.812646] sound hdaudioC0D0: inputs:
    [ 1.812650] sound hdaudioC0D0: Internal Mic=0x1b
    [ 1.812654] sound hdaudioC0D0: Mic=0x19
    [ 1.819178] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address 20:89:84:c7:a0:92
    [ 1.819187] tg3 0000:02:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
    [ 1.819192] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
    [ 1.819196] tg3 0000:02:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
    [ 1.834640] media: Linux media interface: v0.10
    [ 1.845475] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input7
    [ 1.849543] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 1.850477] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 1.850623] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [ 1.851058] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    [ 1.851353] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
    [ 1.860140] iTCO_vendor_support: vendor-support=0
    [ 1.861704] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [ 1.861764] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
    [ 1.862721] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 1.863690] Linux video capture interface: v2.00
    [ 1.875723] usbcore: registered new interface driver ath3k
    [ 1.914247] tg3 0000:02:00.0 enp2s0f0: renamed from eth0
    [ 1.926001] systemd-udevd[145]: renamed network interface eth0 to enp2s0f0
    [ 1.938186] usb 1-1.1: USB disconnect, device number 3
    [ 1.944872] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b336)
    [ 1.953353] input: HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input13
    [ 1.953679] usbcore: registered new interface driver uvcvideo
    [ 1.953684] USB Video Class driver (1.1.1)
    [ 1.997073] intel_rapl: Found RAPL domain package
    [ 1.997080] intel_rapl: Found RAPL domain core
    [ 1.997083] intel_rapl: Found RAPL domain uncore
    [ 1.999325] [drm] Memory usable by graphics device = 2048M
    [ 1.999330] [drm] Replacing VGA console driver
    [ 1.999337] checking generic (d0000000 410000) vs hw (d0000000 10000000)
    [ 1.999340] fb: switching to inteldrmfb from VESA VGA
    [ 1.999399] Console: switching to colour dummy device 80x25
    [ 2.006114] i915 0000:00:02.0: irq 29 for MSI/MSI-X
    [ 2.006130] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 2.006133] [drm] Driver supports precise vblank timestamp query.
    [ 2.006275] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 2.010165] input: Cypress APA Trackpad (cyapa) as /devices/pci0000:00/0000:00:1f.3/i2c-0/0-0067/input/input14
    [ 2.014824] mousedev: PS/2 mouse device common for all mice
    [ 2.037823] ath: phy0: ASPM enabled: 0x43
    [ 2.037831] ath: EEPROM regdomain: 0x6c
    [ 2.037834] ath: EEPROM indicates we should expect a direct regpair map
    [ 2.037838] ath: Country alpha2 being used: 00
    [ 2.037840] ath: Regpair used: 0x6c
    [ 2.044014] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [ 2.044617] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90004980000, irq=17
    [ 2.050867] ath9k 0000:01:00.0 wlp1s0: renamed from wlan0
    [ 2.054438] fbcon: inteldrmfb (fb0) is primary device
    [ 2.054543] Console: switching to colour frame buffer device 170x48
    [ 2.054559] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 2.054563] i915 0000:00:02.0: registered panic notifier
    [ 2.066878] systemd-udevd[145]: renamed network interface wlan0 to wlp1s0
    [ 2.070905] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0
    [ 2.125455] usb 1-1.1: new full-speed USB device number 5 using ehci-pci
    [ 2.154830] tg3 0000:02:00.0: irq 30 for MSI/MSI-X
    [ 2.154842] tg3 0000:02:00.0: irq 31 for MSI/MSI-X
    [ 2.154849] tg3 0000:02:00.0: irq 32 for MSI/MSI-X
    [ 2.714571] Switched to clocksource tsc
    [ 2.714588] IPv6: ADDRCONF(NETDEV_UP): enp2s0f0: link is not ready
    [ 2.731648] usb 1-1.1: string descriptor 0 read error: -22
    [ 2.850571] random: nonblocking pool is initialized
    lsusb
    Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
    Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 001 Device 004: ID 04f2:b336 Chicony Electronics Co., Ltd
    Bus 001 Device 005: ID 0489:e04e Foxconn / Hon Hai
    Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

  • Usb mike not working with mac mini

    Hi,
    I bought a samson CO1U usb connection mike to use with the mac mini as there is no mike connection. The device is recognised by the computer but apparently not by i-movies or Quicktime Pro 7 as when I bring up the audio screen nothing registers in the sound level and obviously nothing records - am I doing something wrong or missing something out or is this device just not compatible? Apple help were no help!
    Hope someone can be of assistance in this matter as I need to record a voiceover on to an animation video.
    cheers, shadwell

    Hi, thanks for your reply - did that but still no joy.
    In utilities / audio midi it says output ( and input ) not supported and in system preferences/sound the input level is registering nothing.I'm going to try the mike on a friend's laptop to see if it is a problem with the mike or the mini mac - or maybe I'm just making some simple mistake in setting it up in Quicktime.Do you know if any usb recording devices actually do work with the mini mac?
    thanks, shadwell

  • Bluetooth headset not working with flash files

    Just got a Plantronics Voyager 510 bluetooth headset. Works just fine, except when viewing clips at YouTube. Not only is there no sound, the clip freezes after a few seconds. I believe they are Adobe Flash. Now this is on my new late 2007 MacBook with Leopard.
    So I figure I'll try the headset on my Intel 1.66 Mac Mine with Tiger 10.4.10. Same thing
    Any ideas.

    Apparently Apple cheaped out on the Bluetooth support in the Tiger OS X (or an official profile wasn't even available)....something to do with not having Stereo Headset support.
    It is possible to circumvent it: http://blog.david.connolly.name/2007/06/stereo-bluetooth-profile-a2dp-on-mac-os. html However, as indicated on the top of that topic - it is outdated (and IMO too much effort).
    In a nutshell - you're being quietly coaxed in to buying Leopard OS X - which does have the Stereo Bluetooth profile installed.
    What I don't get is why Apple can't release to us a nice little patch for Tiger to give us the full use of our Bluetooth hardwares.

  • Wired Headsets not working with Galaxy S5

    I have a number of wired 2.5mm headsets that I use with other Android based smart phones (Droid 4 most recently). I use multiple 2.5mm to 3.5mm adapters, and they have all working fine for all of them.
    When I try to use any of my wired headsets + adapters with my Samsung Galaxy S5 I hear the audio from the headset, but other people don't hear my voice from the headset. When I connect the headset it shows as "earphones" everytime, and indeed does work fine as a earphone, but the microphone does not work. I'm wondering if there is a setting I need to change so the S5 sees my wired headset as a device with a microphone and not just headphones.
    Does anyone have any ideas on this?

    I found out that the wiring of the contacts is different for some phones.  If the earbuds say compatible with iPhone then the tip/ring/sleeve contacts are swapped in relation to the Galaxy S5's contacts.  See: Phone connector (audio) - Wikipedia, the free encyclopedia

  • Fujitsu tabet m532 usb driver not work with flash builder

    Hi, 
    I have a fujitsu tabet m532 that is not among the list of certified device but has its own of 32 bit usb driver.
    But flash builder 4.5 cannot find the driver.
    The hardware id I try also not work:
    USB\VID_04C5&PID_133A&REV_9999&MI_01
    USB\VID_04C5&PID_133A&MI_01
    Can you help?
    Thanks
    Also, can I just edit the inf file using notepad and make it display line by line or any editor I would need?

    Moving this discussion to the Using Flash Builder forum.

  • One of USB ports not working with wireless mouse USB receiver (MBP mid-2009

    Hi,
    I've got a weird problem with one of the USB ports (the one next to SD card slot). I use a Logitech VX Nano (wireless) mouse.
    When I plug the usb receiver to the USB port, no device can be detected. But when trying the other USB port, all works fine.
    I also tried using a usb extension cable with the USB port (problematic one). All works fine again.
    The same happens with windows xp pro.
    Any help appreciated.
    Cheers,
    Alex
    Message was edited by: apexyang

    Is the monitor powered?

  • Blue Yeti USB microphone not working in ALSA/PulseAudio

    Hi all,
    I recently bought a Blue Yeti USB microphone. It is supposed to require no drivers for Windows and OS X, and so far, it works well under Windows, but I cannot seem to get it to function on Arch Linux.  As fair warning, although I am relatively experienced with Linux, I don't know much about the internals of ALSA/PA --- up until now, it has just "always worked", so this is my first real foray into the area. I've tried for many days, with no success, to get this thing working.
    So, let's start off first with my configuration.
    I have a few audio devices:
    An on-board audio solution that I don't typically use. For testing, I have connected an old, crappy pair of headphones, but normally I keep this disabled. It has one capture device. (Analog stereo [or 5.1/7.1/etc]  duplex)
    An external DAC that is connected via USB and is output-only. So, no capture devices on that. (Digital/IEC958 output)
    The Blue Yeti itself, which is connected via USB and supports output (it has an internal DAC) as well as input. So, one capture device here. (Digital stereo output and analog stereo input???)
    The HDMI-out stuff for nvidia, which I never use
    Here is the output of "arecord -l":
    **** List of CAPTURE Hardware Devices ****
    card 1: Microphone [Yeti Stereo Microphone], device 0: USB Audio [USB Audio]
    Subdevices: 0/1
    Subdevice #0: subdevice #0
    card 2: PCH [HDA Intel PCH], device 0: ALC892 Analog [ALC892 Analog]
    Subdevices: 0/1
    Subdevice #0: subdevice #0
    card 2: PCH [HDA Intel PCH], device 2: ALC892 Alt Analog [ALC892 Alt Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    Here is the the output of "arecord -L":
    null
    Discard all samples (playback) or generate zero samples (capture)
    pulse
    PulseAudio Sound Server
    default
    Default ALSA Output (currently PulseAudio Sound Server)
    sysdefault:CARD=Microphone
    Yeti Stereo Microphone, USB Audio
    Default Audio Device
    front:CARD=Microphone,DEV=0
    Yeti Stereo Microphone, USB Audio
    Front speakers
    surround40:CARD=Microphone,DEV=0
    Yeti Stereo Microphone, USB Audio
    4.0 Surround output to Front and Rear speakers
    surround41:CARD=Microphone,DEV=0
    Yeti Stereo Microphone, USB Audio
    4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=Microphone,DEV=0
    Yeti Stereo Microphone, USB Audio
    5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=Microphone,DEV=0
    Yeti Stereo Microphone, USB Audio
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=Microphone,DEV=0
    Yeti Stereo Microphone, USB Audio
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    iec958:CARD=Microphone,DEV=0
    Yeti Stereo Microphone, USB Audio
    IEC958 (S/PDIF) Digital Audio Output
    sysdefault:CARD=PCH
    HDA Intel PCH, ALC892 Analog
    Default Audio Device
    front:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    Front speakers
    surround40:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    4.0 Surround output to Front and Rear speakers
    surround41:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    Here is the output of "aplay -l" (for completeness):
    **** List of PLAYBACK Hardware Devices ****
    card 0: Audio [USB2.0 High-Speed True HD Audio], device 0: USB Audio [USB Audio]
    Subdevices: 0/1
    Subdevice #0: subdevice #0
    card 1: Microphone [Yeti Stereo Microphone], device 0: USB Audio [USB Audio]
    Subdevices: 0/1
    Subdevice #0: subdevice #0
    card 2: PCH [HDA Intel PCH], device 0: ALC892 Analog [ALC892 Analog]
    Subdevices: 0/1
    Subdevice #0: subdevice #0
    card 2: PCH [HDA Intel PCH], device 1: ALC892 Digital [ALC892 Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 3: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 3: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 3: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 3: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    If the output of "aplay -L" is needed, let me know, but it's not all that different from arecord -L.
    Here is my /etc/asound.conf:
    defaults.pcm.rate_converter "samplerate_best"
    pcm.!default {
    type pulse
    fallback "sysdefault"
    hint {
    show on
    description "Default ALSA Output (currently PulseAudio Sound Server)"
    ctl.!default {
    type pulse
    fallback "sysdefault"
    # vim:set ft=alsaconf:
    I don't remember where the bulk of that came from; maybe it was installed like that or maybe I put it in there. Here is another useful command showing non-commented-out/non-blank lines in the pulseaudio conf:
    $ egrep -v '^;|^#|^$' /etc/pulse/*.conf
    /etc/pulse/client.conf:autospawn=no
    /etc/pulse/daemon.conf:exit-idle-time=0
    /etc/pulse/daemon.conf:default-sample-rate = 192000
    So, there's not much I've done there. Here's the contents of /proc/asound/cards:
    0 [Audio ]: USB-Audio - USB2.0 High-Speed True HD Audio
    CMEDIA USB2.0 High-Speed True HD Audio at usb-0000:00:1d.0-1.7, high speed
    1 [Microphone ]: USB-Audio - Yeti Stereo Microphone
    Blue Microphones Yeti Stereo Microphone at usb-0000:00:1d.0-1.8, full speed
    2 [PCH ]: HDA-Intel - HDA Intel PCH
    HDA Intel PCH at 0xf7530000 irq 52
    3 [NVidia ]: HDA-Intel - HDA NVidia
    HDA NVidia at 0xf7080000 irq 17
    And here's the contents of /proc/asound/modules:
    0 snd_usb_audio
    1 snd_usb_audio
    2 snd_hda_intel
    3 snd_hda_intel
    Now, here is the output of "pactl list sources" (the Blue Yeti is last in the list):
    Source #3
    State: RUNNING
    Name: alsa_input.pci-0000_00_1b.0.analog-stereo
    Description: Built-in Audio Analog Stereo
    Driver: module-alsa-card.c
    Sample Specification: s16le 2ch 192000Hz
    Channel Map: front-left,front-right
    Owner Module: 7
    Mute: yes
    Volume: front-left: 17972 / 27% / -33.71 dB, front-right: 17972 / 27% / -33.71 dB
    balance 0.00
    Base Volume: 6554 / 10% / -60.00 dB
    Monitor of Sink: n/a
    Latency: 610 usec, configured 100000 usec
    Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
    Properties:
    alsa.resolution_bits = "16"
    device.api = "alsa"
    device.class = "sound"
    alsa.class = "generic"
    alsa.subclass = "generic-mix"
    alsa.name = "ALC892 Analog"
    alsa.id = "ALC892 Analog"
    alsa.subdevice = "0"
    alsa.subdevice_name = "subdevice #0"
    alsa.device = "0"
    alsa.card = "2"
    alsa.card_name = "HDA Intel PCH"
    alsa.long_card_name = "HDA Intel PCH at 0xf7530000 irq 52"
    alsa.driver_name = "snd_hda_intel"
    device.bus_path = "pci-0000:00:1b.0"
    sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card2"
    device.bus = "pci"
    device.vendor.id = "8086"
    device.vendor.name = "Intel Corporation"
    device.product.id = "1e20"
    device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller"
    device.form_factor = "internal"
    device.string = "front:2"
    device.buffering.buffer_size = "76800"
    device.buffering.fragment_size = "19200"
    device.access_mode = "mmap"
    device.profile.name = "analog-stereo"
    device.profile.description = "Analog Stereo"
    device.description = "Built-in Audio Analog Stereo"
    alsa.mixer_name = "Realtek ALC892"
    alsa.components = "HDA:10ec0892,10438436,00100302"
    module-udev-detect.discovered = "1"
    device.icon_name = "audio-card-pci"
    Ports:
    analog-input-front-mic: Front Microphone (priority: 8500, not available)
    analog-input-rear-mic: Rear Microphone (priority: 8200, available)
    analog-input-linein: Line In (priority: 8100, not available)
    Active Port: analog-input-rear-mic
    Formats:
    pcm
    Source #11
    State: RUNNING
    Name: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
    Description: Monitor of Built-in Audio Analog Stereo
    Driver: module-alsa-card.c
    Sample Specification: s16le 2ch 192000Hz
    Channel Map: front-left,front-right
    Owner Module: 7
    Mute: no
    Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
    balance 0.00
    Base Volume: 65536 / 100% / 0.00 dB
    Monitor of Sink: alsa_output.pci-0000_00_1b.0.analog-stereo
    Latency: 0 usec, configured 100000 usec
    Flags: DECIBEL_VOLUME LATENCY
    Properties:
    device.description = "Monitor of Built-in Audio Analog Stereo"
    device.class = "monitor"
    alsa.card = "2"
    alsa.card_name = "HDA Intel PCH"
    alsa.long_card_name = "HDA Intel PCH at 0xf7530000 irq 52"
    alsa.driver_name = "snd_hda_intel"
    device.bus_path = "pci-0000:00:1b.0"
    sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card2"
    device.bus = "pci"
    device.vendor.id = "8086"
    device.vendor.name = "Intel Corporation"
    device.product.id = "1e20"
    device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller"
    device.form_factor = "internal"
    device.string = "2"
    module-udev-detect.discovered = "1"
    device.icon_name = "audio-card-pci"
    Formats:
    pcm
    Source #15
    State: RUNNING
    Name: alsa_output.usb-CMEDIA_USB2.0_High-Speed_True_HD_Audio-00-Audio.iec958-stereo.monitor
    Description: Monitor of USB2.0 High-Speed True HD Audio Digital Stereo (IEC958)
    Driver: module-alsa-card.c
    Sample Specification: s16le 2ch 192000Hz
    Channel Map: front-left,front-right
    Owner Module: 8
    Mute: no
    Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
    balance 0.00
    Base Volume: 65536 / 100% / 0.00 dB
    Monitor of Sink: alsa_output.usb-CMEDIA_USB2.0_High-Speed_True_HD_Audio-00-Audio.iec958-stereo
    Latency: 0 usec, configured 100000 usec
    Flags: DECIBEL_VOLUME LATENCY
    Properties:
    device.description = "Monitor of USB2.0 High-Speed True HD Audio Digital Stereo (IEC958)"
    device.class = "monitor"
    alsa.card = "0"
    alsa.card_name = "USB2.0 High-Speed True HD Audio"
    alsa.long_card_name = "CMEDIA USB2.0 High-Speed True HD Audio at usb-0000:00:1d.0-1.7, high speed"
    alsa.driver_name = "snd_usb_audio"
    device.bus_path = "pci-0000:00:1d.0-usb-0:1.7:1.0"
    sysfs.path = "/devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.7/6-1.7:1.0/sound/card0"
    udev.id = "usb-CMEDIA_USB2.0_High-Speed_True_HD_Audio-00-Audio"
    device.bus = "usb"
    device.vendor.id = "0d8c"
    device.vendor.name = "C-Media Electronics, Inc."
    device.product.id = "0319"
    device.product.name = "USB2.0 High-Speed True HD Audio"
    device.serial = "CMEDIA_USB2.0_High-Speed_True_HD_Audio"
    device.string = "0"
    module-udev-detect.discovered = "1"
    device.icon_name = "audio-card-usb"
    Formats:
    pcm
    Source #19
    State: RUNNING
    Name: alsa_output.usb-Blue_Microphones_Yeti_Stereo_Microphone_REV8-00-Microphone.iec958-stereo.monitor
    Description: Monitor of Integrated Rate Matching Hub Digital Stereo (IEC958)
    Driver: module-alsa-card.c
    Sample Specification: s16le 2ch 48000Hz
    Channel Map: front-left,front-right
    Owner Module: 9
    Mute: no
    Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
    balance 0.00
    Base Volume: 65536 / 100% / 0.00 dB
    Monitor of Sink: alsa_output.usb-Blue_Microphones_Yeti_Stereo_Microphone_REV8-00-Microphone.iec958-stereo
    Latency: 0 usec, configured 100000 usec
    Flags: DECIBEL_VOLUME LATENCY
    Properties:
    device.description = "Monitor of Integrated Rate Matching Hub Digital Stereo (IEC958)"
    device.class = "monitor"
    alsa.card = "1"
    alsa.card_name = "Yeti Stereo Microphone"
    alsa.long_card_name = "Blue Microphones Yeti Stereo Microphone at usb-0000:00:1d.0-1.8, full speed"
    alsa.driver_name = "snd_usb_audio"
    device.bus_path = "pci-0000:00:1d.0-usb-0:1.8:1.0"
    sysfs.path = "/devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.8/6-1.8:1.0/sound/card1"
    udev.id = "usb-Blue_Microphones_Yeti_Stereo_Microphone_REV8-00-Microphone"
    device.bus = "usb"
    device.vendor.id = "b58e"
    device.vendor.name = "Intel Corp."
    device.product.id = "9e84"
    device.product.name = "Integrated Rate Matching Hub"
    device.serial = "Blue_Microphones_Yeti_Stereo_Microphone_REV8"
    device.form_factor = "microphone"
    device.string = "1"
    module-udev-detect.discovered = "1"
    device.icon_name = "audio-input-microphone-usb"
    Formats:
    pcm
    Source #23
    State: RUNNING
    Name: alsa_input.usb-Blue_Microphones_Yeti_Stereo_Microphone_REV8-00-Microphone.analog-stereo
    Description: Integrated Rate Matching Hub Analog Stereo
    Driver: module-alsa-card.c
    Sample Specification: s16le 2ch 48000Hz
    Channel Map: front-left,front-right
    Owner Module: 9
    Mute: no
    Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
    balance 0.00
    Base Volume: 17775 / 27% / -34.00 dB
    Monitor of Sink: n/a
    Latency: 949811526 usec, configured 100000 usec
    Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
    Properties:
    alsa.resolution_bits = "16"
    device.api = "alsa"
    device.class = "sound"
    alsa.class = "generic"
    alsa.subclass = "generic-mix"
    alsa.name = "USB Audio"
    alsa.id = "USB Audio"
    alsa.subdevice = "0"
    alsa.subdevice_name = "subdevice #0"
    alsa.device = "0"
    alsa.card = "1"
    alsa.card_name = "Yeti Stereo Microphone"
    alsa.long_card_name = "Blue Microphones Yeti Stereo Microphone at usb-0000:00:1d.0-1.8, full speed"
    alsa.driver_name = "snd_usb_audio"
    device.bus_path = "pci-0000:00:1d.0-usb-0:1.8:1.0"
    sysfs.path = "/devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.8/6-1.8:1.0/sound/card1"
    udev.id = "usb-Blue_Microphones_Yeti_Stereo_Microphone_REV8-00-Microphone"
    device.bus = "usb"
    device.vendor.id = "b58e"
    device.vendor.name = "Intel Corp."
    device.product.id = "9e84"
    device.product.name = "Integrated Rate Matching Hub"
    device.serial = "Blue_Microphones_Yeti_Stereo_Microphone_REV8"
    device.form_factor = "microphone"
    device.string = "front:1"
    device.buffering.buffer_size = "19200"
    device.buffering.fragment_size = "4800"
    device.access_mode = "mmap"
    device.profile.name = "analog-stereo"
    device.profile.description = "Analog Stereo"
    device.description = "Integrated Rate Matching Hub Analog Stereo"
    alsa.mixer_name = "USB Mixer"
    alsa.components = "USBb58e:9e84"
    module-udev-detect.discovered = "1"
    device.icon_name = "audio-input-microphone-usb"
    Ports:
    analog-input-mic: Microphone (priority: 8700)
    Active Port: analog-input-mic
    Formats:
    pcm
    Honestly, I think that's about all of the configuration info I can give. Here are some screenshots of pavucontrol, though, in case you are not yet sated: http://imgur.com/a/ngyLl
    Now, on to the debugging stuff. First: everything except Blue Yeti recording works. The external DAC works, the on-board audio (both input and output) work, using the DAC in the Blue Yeti to play music/monitor the microphone works (so it works as an output). The only thing that doesn't work is actual recording from the Blue Yeti itself.
    When I try to record from the Blue Yeti with parecord -v, I get very strange behavior. Essentially, the "latency" of the microphone measured is exactly the same as the time it has been recording. That is, if it has been recording for 5 sec, then the latency is 5000000 usec. Also, if I try to record something in Audacity, I get no result except for a message box that says "Latency Correction has caused the recorded audio to be hidden before zero. Audacity has brought it back to start at zero." Also, pavucontrol doesn't show an input volume bar for the Blue Yeti, as in the above screenshots, whereas it normally will for microphones that are getting input. The Yeti is not muted, either, so it should be picking up ambient fan noise and such.
    Does anyone have any ideas? Is there some configuration error I've made? Typically, this sort of stuff simply works out of the box for me, so I am somewhat stuck on what to do. Could it be a driver-level bug?

    I'm not sure what you mean by "mixed with audio in Alsamixer". Can you clarify?
    With that said, my problem did mysteriously fix itself after some update (presumably to alsa). Unfortunately, I noticed it in passing one day while I was changing the volume of something in pavucontrol, so I don't remember the exact update that caused it to work. But yes, my current setup does work now: I can listen to audio through my DAC and use the Yeti for recording. However, I have found that use of the Yeti crashes Google Hangouts, although it works perfectly in every other program I've tried.
    As documentation, here is my current working setup (it is very similar to the above): in PulseAudio, the DAC is set to be a Digital Stereo (IEC958) output. The Yeti (called an 'Integrated Rate Matching Hub' in pavucontrol) is set to be an Analog Stereo Input. In the input devices section, I have the Yeti's volume set to around 58% (-14.31 dB), which is past the base volume a fair ways but produces decent levels for recording. The DAC's volume is set to 100% (0dB gain, the DAC takes care of the level). In alsamixer, I have the mic level for the Yeti set to 40.
    Edit: This is a long-time-later edit, but let me say that when you have multiple USB audio devices, what USB hub and in what order they are connected seems to matter a great deal. If you can't get your Blue Yeti to work, try moving it to a different set of USB ports (controlled by a different controller) on your motherboard. This magically fixes the issue for me.
    Last edited by rwiggins (2014-12-14 00:26:39)

  • USB Ports not working with specific devices

    So this one has me scratching my head. My USB ports on the back of my iMac are working except for a few devices. 1 being a logitech USB receiver, and 1 being a usb mp3 player. When I plug the received into the iMac the keyboard won't work, but when I plug my USB hub into the same USB port and the receiver into the hub it works fine. The mp3 player isn't working in any usb/hub (so that's a mook point).
    Here's what I've tried to resolve this issue:
    1. Reset iMac
    2. Reset PRAM
    3. Try every usb port on the back of the iMac
    None of these have fixed my issue. Plugging it into the hub isn't a huge deal, but I'd like the option to use my USB ports as I wish without having to deal with this. Anyone have advice on a solution?

    It is not a matter of using your USB ports as you wish, it is a matter of what you are plugging into them and the power demands that what you plug into them makes on the system.
    Not all USB ports or devices are created equal. How many ports are you using? What exactly are you plugging into the ports? What is the power demand of each item that you are plugging into each port? Are any of the USB devices self powered from their own separate power supply? Are all of the devices dependent upon the iMac for power?
    It sounds to me that you have too many high power devices demanding more power through the ports than the iMac can accommodate. Is the USB hub self powered? If so, that is probably why it resolves your issue with the Logitech Unified receiver. There is very little info on this device on the Logitech website, so I could not ascertain its power demands.
    Dah•veed

  • USB microphone not working with AudioPublisher

    Hi,
    I have a voice chat feature in my application, in which I use AudioPublisher and AudioSubscriber.
    The code is almost identical to the Audio.mxml example coming with the SDK.
    I have a 'start voice chat' button that starts voice chat.
    The problem I'm having is that a Macbook's built-in microphone works fine,
    while an external USB microphone doesn't.
    I selected the correct Microphone from the drop-down menu in the 'Adobe Flash Player Settings',
    and the record volume bar also properly shows a non-mute green bar.
    The headset I'm using is MX500i from Plantronics.
    I don't think there's any problem with my code considering that it works perfectly with Macbook's microphone.
    It'd be great if anyone has a solution to the problem I have.
    Thanks,
    Juho

    I had the same problem. You need to check the device index of your USB mic.
    In my case. I'm on a Mac OSX 10.6 system. I had four devices cataloged. With the last one being the USB mic.
    Then set like so in your AS code audioPub.microphoneManager.micIndex = 3;
    Remember, that the indexing is 0 based.
    The sound framework make the assumption that the index is 0.
    Hope that helps.

  • USB Interface Not Working With Logic Pro 9

    Hello,
    I've had a Tascam US-1641 for several years now with absolutely zero issues on my old PC. Ever since I upgraded to Mac (early 2011 17 inch Macbook Pro running Snow Leopard) I've had nothing but problems with the US-1641. No matter how many times I uninstall-reinstall the drivers and what USB port I plug it into, whenever I turn on the device and it's connected to my Macbook, it crashes my operating system and it freezes everything I was doing. Logic Pro doesn't load and when it sometimes does (10 minutes later), it immediately crashes when I click anything.
    I've tried several tips to fix it and nothing worked. The most popular choice was select the default input/output in Logic to the system audio, then quit Logic, turn on the interface, then restart Logic. No such luck. I have to reboot my machine at least 5 times, uninstall/reinstall the driver and hope it works to use the interface. I thought it was the operating system, so I upgraded to Mountain Lion and installed the new driver for Mountain Lion, after of course deleting the other drivers and removing all previous data, and it is still giving me the same problems.
    I don't have the money to afford a replacement model or a different interface from a different company, so I'm hoping you guys can help me figure out what exactly it is that's causing the interface to freeze my operating system and crashing my Mac whenever I try to use it. I am getting extremely frustrated at this and as much as I love OSX and Logic, what good is this piece of software if I can't use it? I need help.
    Thank you.

    The problem lies with Tascam and their inability to write stable drivers for OS X...  and isn't anything to do with Logic Pro ..
    As you know, you are not the only person to have had this issue and the reality is, while the 1641 might work fine with  Windows, when it comes to OS X Macs.. it's an entirely different story... depending on the version of OS XS you are running.
    The one tip I have read, that seemed to fix it for most people.. (Though not all) is as follows;
    (Thanks to Paulypaulpaul for this)
    -uninstall your tascam driver 2.10
    -restart
    -install driver 1.03
    -restart
    -plug in your tascam
    -goto where you download your drivers (http://tascam.com/product/us-1641/downloads/), scroll down to the bottom where it says firmware, Download the firmware 1.02 (3rd from top under firmware), install it. your control panal should now read 1.03 for your drivers and 1.02 for your firmware.
    -install drivers 2.10
    -restart
    Follow each of the steps exactly.. including all restarts when indicated..
    ...and good luck...

  • Belkin Network USB Hub not working with new BT Rou...

    Hi,
    I received my new hub to use with Infinity when they turn it on in a few days time.
    I connected the new router to the ADSL and all works perfectly without any set up needed.
    I installed (on my old 'sheep-dip' PC) the BT software, and now this test PC will not connect to any USB hard-drives or Printers connected to my Belkin Network USB hub.
    The Network USB hub works fine with all the other PCs in the house - but not if I install the BT software.
    (Which appears to be mainly adverts and a link for those too dim to type BT.com in a browser... ;o)
    I am guessing that this may be something to do with the software blocking use of the new BT Router using its own USB socket as a Network USB link - as this is being saved for 'future product enhancements'.  Is there anyway of curing this and still having the BT software on this machine?
    Thanks!

    Is this issue likely to go away when the Infinity service starts? - I am guessing not?

Maybe you are looking for

  • Thread pool rejecting threads when I don't think it should, ideas?

    Hi, I have a server application in which I only want a specific number of simultaneous requests. If the server gets more then this number it is suppose to close the connection (sends an HTTP 503 error to the client). To do this I used a fix thread po

  • Picked Quantity is not updated After delivery in Vl03n

    After delivey in Order (VA03), the picked quantity is not updated Properly(VL03n). It is coming as Zero. Is it any configurations needed or writng any code. For that I put Break point in FMs like SD_DELIVERY_UPDATE_PICKING in program RVADEK01. But it

  • Using a schema from a different Logical Data Service

    Is it possible to use a schema from a different Logical Data Service in a new Logical Data Service? I want to maintain just one version of the schema.

  • 11gR2 Real Time Apply / open read only

    Hi, I have a single instance primary database with a physical standby. The release is 11.2.0.1.0. Max Availability mode LGWR SYNC transport Data Guard Broker configuration enabled Both the primary and standby database are registered with the Grid Inf

  • Registering products without the license details

    I have a numbet of Adobe products - cs5 and 6 - on my pc and would like to register them but I have no license details installation keys etc. I think I need this to enable me to move my products on to a new pc. Can anyone point me in the right diecti