USB-hub stopped working after upgrading

I have a macbook pro 13 inch, year 2011.
On my desk, I attach it to a thunderbolt display. To those USB-ports, I attached the belkin desktop USB hub (model F4U017) with 7 USB ports.
All worked fine and without a glitch untill I upgraded to OSX Moutain Lion.
Suddenly it won't connect annything I plug into it.
All the cables of the hubb still work fine, those have been tested.
When I tested the hub with a very old iMac (i think still with leopard it), it worked again.
To be sure, I also tested a 4-port hub without external power supply on moutain lion. That one still works fine.
How come my 7-port hub won't work any longer? How can I make it work?

Not sure. Might be an issue with the USB drivers in mountain lion.
I've had an issue with a couple hubs not working after plugging back into my macbook pro while it's on.
Fixed by restarting my computer, but that's super annoying and takes me back to my Win 95 days. Never saw this issue before I upgraded to mountain lion.

Similar Messages

USB- hub stopped working after upgrading to OSX Mountain lion

I have a macbook pro 13 inch, year 2011.
On my desk, I attach it to a thunderbolt display. To those USB-ports, I attached the belkin desktop USB hub (model F4U017) with 7 USB ports.
All worked fine and without a glitch untill I upgraded to OSX Moutain Lion.
Suddenly it won't connect annything I plug into it.
All the cables of the hubb still work fine, those have been tested.
When I tested the hub with a very old iMac (i think still with leopard it), it worked again.
To be sure, I also tested a 4-port hub without external power supply on moutain lion. That one still works fine.
How come my 7-port hub won't work any longer? How can I make it work?

Not sure. Might be an issue with the USB drivers in mountain lion.
I've had an issue with a couple hubs not working after plugging back into my macbook pro while it's on.
Fixed by restarting my computer, but that's super annoying and takes me back to my Win 95 days. Never saw this issue before I upgraded to mountain lion.

Usb flashdrive stopped working after upgrade [SOLVED]

When I attach my flashdrive I do not get the usual sda1 device node, just an sda... What can I do? The drive works in Windows of course. Fdisk /dev/sda says "Unable to read /dev/sda", dmesg mentions the usb attach, but nothing about partitions of course...
Last edited by bakaohki (2007-03-04 14:11:52)

:(Anyone?
I thought I would just repartition the drive, but fdisk says
Unable to read /dev/sda
Edit: after some messing around with the system (mainly rolliong back and forth different packages) I came to the conclusion that this is a kernel problem (2.6.19 works fine, while 2.6.20 not) - while I could not rollback the nvidia driver to 2.6.19 at least I know what the problem is. But of course this will not fix it...
Last edited by bakaohki (2007-02-22 06:31:15)

Kodak ESP 3200 stopped working after upgrading to Yosemite

Kodak ESP 3200 stopped working after upgrading to Yosemite

Kodak has posted an unsupported hack that has been reported to enable printing to a Kodak printer not supported in OS X 10.10 ("Yosemite"). Perhaps it would have the same effect with some other kinds of printers that aren't supported in Yosemite. I have no information about that, one way or the other.
I have not tested the hack myself and I don't know all the possible effects. As far as I know it will not break the compatibility of printing software that is already compatible with Yosemite. It may degrade the security of the web administration interface of CUPS. That interface is not enabled by default, and will not be enabled by the procedure described here. Even if it were enabled, I know of no way it could be exploited, with or without the modification. Nevertheless, if you have enabled the web administration interface, you should disable it if you decide to follow these instructions. If you don't know what the web administration interface is, you haven't enabled it.

ZTE Mf190s Internet USB Modem not working after upgrading to Yosemite.

ZTE Mf190s Internet USB Modem not working after upgrading to Yosemite. any salutation!!

Follow these steps:
go to system preferences.. Open Network..
CONFIGURATION: DEFAULT
TELEPHONE NUMBER : #99*
leave account name and password columns blank
Now go to ADVANCED
IN MODEM MENU
VENDOR : GENERIC
MODEL : GPRS / 3G
Press ok
Then CONNECT.. Enjoy.

My Microsoft Office 2004 stopped working after upgrading to MT. How can I get it to work, or, how can I uninstall MT?

My Microsoft Office 2004 stopped working after upgrading to Mountain Lion. How can I get it to work again, or, how can I uninstall MT?

Office 2004 Applications Won't Work in Lion
You must have Office 2004 which is a PPC-only suite and will not work in Lion. You need to upgrade to Office 2011 - Mactopia - or you can try the freeware suite, Libre Office, that is functionally similar to Office 2007 for Windows except it works on Lion.
You may want to consider as well:
These two suites are similar to Libre Office but not as current or as well-supported:
NeoOffice
Open Office
And, then there is Apple's iWork suite:
Pages - word processing and layout
Keynote - presentation
Numbers - spreadsheet
Each can open and save Office compatible files. They may be purchased separately via the Mac App Store for $19.99 each.
(Access to the Mac App Store requires Snow Leopard 10.6.6 or higher and an Apple ID.)

Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.

My Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.. I wonder what's the work around or troubleshooting to fix this. Thanks!

try and Reset the System Management Controller (SMC)

Windows media player stop working after upgraded from firefox 6.02 to Firefox 7.01 yesterday.

windows media player stop working after upgraded from Firefox 6.02 to Firefox 7.01 yesterday.
the plugin for win media player is already installed and working fine in FF 6.02 before upgrade. i have Google this issue without any result so far. so i reinstalled the old version 6.02, until fix is found.
anyone has the similar issue with Firefox 7.01 in Win 7 32 bit ?

The issue was not with FF 7.01. VLC player version 1.11.1 is conflicting with windows media player when FF 7.01 tries to play media files! Which was not happening before in FF 6.02.
VLC and plugin media player need to be uninstalled first, then uninstalled FF 6.02. Install FF 7.01 and then win plugin media player again.
Test media player at www.vdat.com/techsupport/windowstest.asp

My work e-mail stopped working after upgrading to 5 ios.

My work e-mail stopped working after upgrading to 5 ios, I get the message that the mail server is not responding. Verify that you have entered the correct account info in mail settings. the information is correct and worked until I updated.

That means you have to restore the device with iTunes now. So connect the iPad to your computer's iTunes and restore the iPad.
iTunes: Restoring iOS software

After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working, After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working!

After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working, After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working? Can it be recovered or a Hardware has to be replaced. I tried restoring my phone, but it did not work. Any solutions?

alisportshots wrote:
I have a similar problem, but after following your suggestion of deleting my iphone backup and then turning backup back on again, I needed to plug my phone into my computer to sync the backup. I re-tried to do an icloud backup and it again told me that "the last backup could not be completed"... since I had deleted the backup, it says the "Last backup: never". Ugh. I reconnected my iPhone 4S to my computer and iTunes so I could sync my phone and do a backup... it's still "waiting for sync to start"...
For your iCloud backup, you may have an app that is preventing the backup from succeeding. To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again. If it succeeds, then the camera roll and/or one of your apps is preventing the backup and you'll have to located by process of elimination. Turn the camera roll On and try backing up again. If it succeeds, turn some of your apps to On and try backing up again. If it succeeds again, turn some more apps to On then try again; repeat this process until it fails. Eventually you'll be able to locate the problem app and exclude it from your backup.
If you turned iCloud backup off and try to sync to create a backup on your computer and got a "waiting for sync to start" error, it may be caused by a corrupt backup on your computer. You could try deleting your last backup by opeing iTunes and going to Preferences>Devices, clicking on your last backup and clicking Delete Backup. Then try again.

Why does my cable selfie stick stop working after upgrading to iOS8.2?!

I have an iPhone 6. My cable selfie stick stopped working after upgrading to iOS8.2.
My friend's iPhone 6 is still iOS8.1, and the seflie stick works fine for him!
How do I solve this?

Are you using the paintbrush and have a gradient assigned to a stroke in CS6?
Double click on paintbrush, and enable keep selected.
If not give us a better explanation of what tool & settings you are using. (eg: blob brush, shape builder)

Why does the ipad 2 speaker stopped working after upgrading to ios 8

WWhy does the iPad 2 speaker stopped working after upgrading to ios 8 why plz respond

Hi A_S85,
It appears your iPhone has an issue relating to sound. The following article may help you find a solution:
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
Can't hear anything from the built-in speaker of your iPhone, iPad, or iPod touch? Maybe you can hear, but the sound is distorted, muffled, intermittent. Or maybe you hear static or crackling noises. If your iOS device has any of these issues, follow these steps.
Follow these steps and test the sound after each one.
Go to Settings > Sounds and drag the Ringer And Alerts slider to turn the volume up.
If you can hear sound from the speaker, then the speaker works. Continue with these steps to find the setting or switch that's affecting the sound. If you can't hear sound from the speaker, contact Apple Support.
Make sure the Ring/Silent switch is set to ring. If you can see orange, it's set to silent.
Restart your device.
Open an app that has music or sound effects. Adjust the volume with the volume buttons or the slider in Control Center.
Go to Settings > Bluetooth and turn off Bluetooth.
If there's still no sound, connect a headset. If you can hear sound through the headset, remove it and clear any dust or debris from the headset jack of your device.
If the device is in a case, make sure that the case doesn't block the speaker.
Use a brush to gently clear any debris from the speaker and Lightning connector (or 30-pin dock connector). The brush should be clean and dry and have soft bristles.
Update your device to the latest version of iOS.
If you followed these steps and still hear no sound or distorted sound, contact Apple Support.
Thank you for contributing to Apple Support Communities.
Take care,
Bobby_D

1 of 2 USB ports stopped working after 10.7.2 upgrade

I have the newest Macbook Pro. I upgraded to 10.7.2 today and immediately after, 1 of my 2 usb ports stopped working.   Thought it may be the cable, so I switched cables. Tried plugging in my iPhone, my portable drive and nothing.   Both work on the other port though.   Both ports worked fine before the update.
I've rebooted 4x.
Suggestions?

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.
Genius Bar reservation
http://www.apple.com/retail/geniusbar/
Best.

My USB webcam stopped working after I upgraded to OS X 10.6.8

When I installed the upgrade to OS X 10.6.8 my USB webcam stopped working.
Any idea how to get it back.

Upgraded from what to 10.6.8?
Did it work before?
What camera?

First USB port stops working after random time and won't work until I restart

Hey guys
I have this problem on my late 2011 Macbook Pro 13 inch,
It's been for a year already and it really freaks me out and drive me crazy
My first USB port next to the thunderbolt stops working after like 3 days, and it won't respond until I restart my computer or log off and log in again.
If I restart my computer, USB stops working after 3 days and won't respond until I restart
If I log off it works for like a couple of hours and then stops again
I have tried EVERYTHING, SMC reset - no luck, PRAM reset - same results, Upgraded to lion same results, Upgraded to mountain lion - SAME RESULT
And I can't take it to an apple store because I'm not from the US
I am 100% sure this is a software problem and I've seen here that many people have faced this problem
Please help, it really freaks me out

ElectroSpyzz wrote:
Hey guys
I have this problem on my late 2011 Macbook Pro 13 inch,
It's been for a year already and it really freaks me out and drive me crazy
My first USB port next to the thunderbolt stops working after like 3 days, and it won't respond until I restart my computer or log off and log in again.
If I restart my computer, USB stops working after 3 days and won't respond until I restart
If I log off it works for like a couple of hours and then stops again...
I'm sure this isn't what you want to hear but unless you really are using your laptop 24 hours a day, is there any reason why you don't just shut it down and reboot when you're ready to use it again? I have to wonder how many other MacBook Pro owners potentially have the same problem but when they quit computing for the day, their computers quit too.

USB-hub stopped working after upgrading

Similar Messages

Maybe you are looking for