USB remote access problem for E3000?
Hi,
I recently got the E3000 router because it has USB and is dual band simultaneous router.
It's connected to ATT modem+router. I've disabled wireless on ATT 2wire modem and connected the linksys router to it.
Now after a lot of messing with it i have configured the USB drive to work and be visible on the network, also media server seems to be working fine.
Now i need help with the following:
Now what i am trying to do is have remote access to my USB connected hard drive over the internet.
Also I want to set the USB HDD as media download drive. E.g. if i am downloading a big files or torrent download i want it to be directly in the USB connected HDD.
Also in My Computers/network i have the drive visible as a computer and when i double click on it, it ask me for admin user id and password and i have files access available, i dont understand why is that? Because the same can be achieved through "map network drive" so what is the difference between the two?
Awaiting reply
Thanks for the help guys
Solved!
Go to Solution.
Remote Management allows you to manage the router from a remote location, via the Internet. Managing a Linksys router from a remote location is similar to accessing it locally. The main difference is, instead of typing the router’s LAN IP Address in the web browser’s Address bar, you have to type the router’s Internet IP Address.
Remote Management Port
Enter the port number that will be open to outside access. The default setting is 8080. This port must be used when you establish a remote connection.
To enable remote management on a Linksys router, you need to perform three steps:
1] Enabling Remote Management on a Linksys Router
2] Checking the Internet IP Address of a Linksys Router
3] Managing a Linksys Router from a Remote Location
Here is the link: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=98e570a093ae4ccda0d7cfb7fda97df7_4023.xml&pid=80&r...
Second, there are three things you need to do to be able to share the contents of your USB storage device:
i. Accessing the Storage Setup Menu
ii. Creating Share
iii. Mapping a Network Drive
Here is the link which can help you in the HDD installation: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=0868d4e24a6a468280c3cf270c1d6a31_21517.xml&pid=80&...
Similar Messages
-
Storage solution - NAS, iTunes, USB, remote access
Hi,
I am looking to purchase a new Storage Device. I have a small network at home consisting of, in addition to my computer, my girlfriend's computer and a couple of friends who regularly come over. I have a cable modem, Vonage (which I am about to get rid of - never use it), and an Airport Express. My access to the network is strictly through the AE, hard wired is not an option in my house due to setup.
I have a MacBook with a 160GB Western Digital USB drive directly attached. The WD houses my iTunes, but it's full. I stream music to my home stereo from iTunes through the AE. I also have about 30GB of photos on my Macbook's HD. I have no backup strategy in place so if the WD dies, I'm screwed. Here is what I want in a solution:
1) Redundancy - preferably RAID 1 or 5
2) Fast enough to steam HD content wirelessly (I will probably be adding an Apple TV this summer)
3) Ability to move around my house and still stream music. Currently I have to be plugged into the WD (which has an AC Adapter) so I am relegated to the desk.
4) Remote Access of files. I am sick of lugging around the external hard drive. Wondering if this would be fast enought to listen to music while outside of my internal network?
5) **Probably not possible** Ability to play music directly from the Storage Device, potentially with AppleTV or some other device, so that I don't have to have my MacBook powered on.
I am leaning towards a NAS but I have been reading some info about using Airport Extreme USB hard drive sharing function. I also thought that AppleTV might release an update that allows users to access and play their digital content without going through the PC.
I looked at the following devices:
1) Maxtor Shared Storage II 1TB - uPnP AV adapter looks like it will play files diretly from this withou PC - wondering if the Airport Extreme is a uPnP AV device?
2) Iomega 150d
3) Buffalo Terastation Live (looks like it has limited Mac support)
I'm looking for recommendations on a solution, NAS, USB or otherwise that addressed the above concerns. I don't want to spend over $1,000.
Thanks
ConorI also have a very similar concern.
I am about to purchase a hard drive enclosure with ethernet capability. If you go to ebay and search for "3.5 ethernet" you will find many "USB 2.0 LAN Ethernet Enclosure" for $30-40. Then I will buy a 3.5 IDE hard drive of 500GB for about $100.
My idea is to attach this setting to my Netgear wireless router and access photos, music and videos from my laptop and desktop. -
HI
Just today, i started to get the following error from my ix2-200 Storcenter (non Cloud edition)
"The device is unable to acquire your external IP address. Confirm that your device is connected to a router which connects to the Internet."
When i try to reconfigure remote access, i get the following error message
"Remote access cannot be configured. Make sure your device is connected to a router which connects to the Internet"
I went through various checks and made sure my router is connected to the internet. Port forwarding for port 443 is open on my router etc and i made no change that would stop Remote Access from working as it was before today
When i try to reconfigure remote access, I also notice the following;
- My external IP address is stuck on an old IP. I have tried restarting, shutting down and rebooting, changing my internal IP to see if it would force the new external IP to show, but nothing has worked.
- I used to have 2 messages on the Remote Access page showing number of days left on DNS and SSL certificates. Now i just have one message showing days on "Remaining Certificate Subscription"
- When i click the Renew Subscription link it is is down (iomegalinkportal.com)
Im thinking the fact that iomegalinkportal.com is down is causing this, but appreciate if someone can look and tell me what the error is causing my problem and if it's not the link being down, how i can get the NAS to pick up the correct external IP address?
Rgds
John
Solved!
Go to Solution.Could well be the 'old' iomegalink-stuff is no longer working or your router does not allow dynamic configuration by your NAS.
If you did not change anything to the router you should be able to https://<external-ip> .
( To determine external IP either check router config or use... http://www.whatismyip.com/ )
If the https-command on your browser brings up NAS startpage you may have alread reached 90%-success-mark.
All you then have to do is configuring your router to a dyndns service ( eg. dyn.com , for free as long as you log in once a month) and make a proper port forwarding to your internal NAS-ip-adress..........
If this is too techy, you should be able to find a friend in the neighbourhoud ;-) to lend you a hand for a try..
Or check some google nuggets like
' dyndns tp-link' http://www.tp-link.com/gr/article/?faqid=297
' port forwarding netgear' http://www.youtube.com/watch?v=VvzFHHDvU8E
Various PCs / Laptops ( sorry I still really love Dell and Fujitsu ;-))
Supporting Customers ix2s and ix4s -- Love Networking ( not only technically ).
I am not a Lenovo Employee.
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! -
Regarding USB Driver (OMAP1710) Problem for Belkin...
Dear All,
I've been trying to update my Belkin Skype Phone (F1PP000GN-SK) from version: 1.1.0.10 R20 to version: 1.1.0.22R20 from the belkin support site.
But the problem is when i connect the USB cable to my Windows 7 (32-bit) laptop i get a pop-up saying "Missing OMAP1710 USB driver'
Kindly someone help me pls.I believe the original drivers packaged with the Belkin installer/flasher may work on the 32-bit version of Windows 7, but will not work with the 64-bit version. Since I do own this phone, I decided to resolve this problem for myself as well. Even though they are not available from Belkin, I was able to track down and extract/modify the latest drivers/inf for this phone.
You will need to extract and browse to these files using device manager to get the device installed. You will get a warning about the files being unsigned, proceed anyway to finish installing the device. Before flashing you will either have to disconnect/reconnect the phone or press the "#" key to refresh it. Once it starts flashing DO NOT disconnect the device. I've reflashed my phone several times without issue.
If the reason behind upgrading it is to resolve a freeze, the upgrade may not fix it. You would want to downgrade to the original release. That will generally resolve the issue. After that, you can flash it to the latest release.
My version of the latest drivers for Windows XP/Vista/7/8 (32/64-bit unified inf) are available from the following location:
http://pcdust.com/Downloads/OMAP1710/OMAP1710.zip -
UDF access problem for only 1 User
Hi @ll,
i got the problem, that one user is not longer able to search bp records by using UDF. Also the user is not able to change the UDF values. This problem only happen on bp data. In every other form the access to udf is possible. Every other using could access UDF in the bp data.
Any idea ?
Regards Steffen
Ps. I grant admin rights for the user. The problem still exists.Hi Steffen.
I'm not sure this could be helpful for you, but have try to check the ENABLE FLAG for this udf in UDF PARAMETRIZATION?
Open the document whit UDF logging in with the user that have not permission in UDF. Then press CtrlshiftB and check the ENABLE flag for this UDF...
Sorry for my english....
Regards
Gianluca -
Urgent remote access problem!
hi dear all,
i have a 2800 router who is connected via dialout to 1 871 router,
I can ping the async interface on the 871 router but not the loopback address.
here are the configuration of both of them:
router 2800
hostname 2800
boot-start-marker
boot-end-marker
enable secret xxxx
no aaa new-model
resource policy
ip subnet-zero
ip cef
no ip domain lookup
chat-script Dialout ABORT ERROR ABORT BUSY ABORT "NO ANSWER" "" "AT" OK "ATDT\T" TIMEOUT 40 CONNECT \c
modemcap entry pooria
username xxx password xxx
username xxx password xxx
interface FastEthernet0/0
ip address 172.20.1.4 255.255.255.128
duplex auto
speed auto
interface FastEthernet0/1
no ip address
duplex auto
speed auto
interface Async1/0
no ip address
encapsulation ppp
no ip route-cache cef
dialer in-band
dialer pool-member 1
dialer-group 1
async dynamic routing
async mode dedicated
routing dynamic
interface Dialer1
ip address 192.168.0.1 255.255.255.252
encapsulation ppp
no ip route-cache cef
no ip route-cache
no ip mroute-cache
dialer pool 1
dialer idle-timeout 0
dialer fast-idle 180
dialer string Dilaout
dialer string 44843763 modem-script dialout
dialer-group 1
ppp authentication chap
router eigrp 7
network 172.20.1.0 0.0.0.127
network 192.168.0.0 0.0.0.3
no auto-summary
ip classless
ip route 0.0.0.0 0.0.0.x.20.1.1
ip route 172.25.150.0 255.255.255.252 192.168.0.2
ip http server
dialer-list 1 protocol ip permit
control-plane
line con 0
line aux 0
line 1/0 1/15
exec-timeout 0 0
no flush-at-activation
script dialer Dialout
modem InOut
modem autoconfigure discovery
transport input all
transport output all
stopbits 1
flowcontrol hardware
line vty 0 4
login local
scheduler allocate 20000 1000
end
the configuration of 871 router
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname 871
boot-start-marker
boot-end-marker
enable secret xxx
enable password xxx
aaa new-model
aaa authentication login default local
aaa authentication login no_login none
aaa authentication ppp default local none
aaa session-id common
resource policy
ip cef
no ip domain lookup
modemcap entry POL:MSC=&F1S0=1
username cisco password xxx
username 2800 password xxx
interface Loopback0
ip address 172.25.150.1 255.255.255.252
interface FastEthernet0
shutdown
interface FastEthernet1
shutdown
interface FastEthernet2
shutdown
interface FastEthernet3
shutdown
interface FastEthernet4
no ip address
duplex auto
speed auto
interface Vlan1
no ip address
interface Async1
ip address 192.168.0.2 255.255.255.252
encapsulation ppp
dialer in-band
dialer idle-timeout 0
dialer fast-idle 180
async dynamic routing
async mode interactive
peer default ip address 192.168.0.1
ppp authentication chap
routing dynamic
ip route 0.0.0.0 0.0.0.0 192.168.0.1
no ip http server
no ip http secure-server
control-plane
line con 0
modem autoconfigure type POL
modem enable
transport output all
speed 115200
line aux 0
exec-timeout 0 0
login authentication no_login
modem InOut
modem autoconfigure type POL
autocommand ppp default
transport input all
transport output all
stopbits 1
speed 115200
flowcontrol hardware
line vty 0 4
transport input all
transport output all
scheduler max-task-time 5000
webvpn context Default_context
ssl authenticate verify all
no inservice
end
please help me!ehsan
You have also posted this issue on the WAN Routing and Switching forum where I have provided an answer. I suggest that we consolidate the discussion on that forum.
vanesh
A quick glance at the 5 FastEthernet interfaces on the remote router reveals the problem without any need for show ip route. When interfaces are shut down or have no IP address there can be no routes to those interfaces.
HTH
Rick -
Port Range Forwarding Problem for E3000 and Iomega HMNHD Cloud
I'm trying to set up an Iomega Home Media Network Cloud NAS and I'm having problems with opening ports 50500-50599. I have opened port 80 and 443 successfully and included the above port range above as well, but when I check it on www.yougetsignal.com the ports 50500-50599 are still closed. I even tried to split the range in two parts, and still no success. I have been in contact with my ISP and confirmed they do not block any ports in the 50500-50599 range and that the cable modem (a Motorola SBV5120) is operating in Bridge Mode.
I am operating under an older firmware and hope that is not the cause of this problem. Also, using Win7 and Vista (tried and failed on 2 laptops).
Did I forget anything? Any suggestions/solutions? Thanks.You may want to check out the list of tested hard drives to work with this router first. The link is E3000 and E2100L hard disk compatibility list. Based on the list, your iomega home media is not included. On the link for the tested hard drives to work with E3000, it is indicated that if your hard drive is not on the list, it may or may not work. With your case, since it is not working it may be due to compatibility issue.
-
Sir
i make a jar file which contain all the images and properties files.befor jar i a pass the path
like that
JButton button=new JButton(new ImageIcon("images\abc.gif"));
now how can i access the abc.gif from the jar file.
plz give me a line of example
thanks and regardOops!... sorry too quick on keyboard!
Try this way (supposing your .JAR file contains a folder called 'images' containing the file 'abc.gif':
URL url = new Object().getClass().getResource("/images/abc.gif");
ImageIcon icon = new ImageIcon(url);Hope this helped,
Regards. -
I'm trying to set up new 3TB Time Capsule as a wireless network server (with remote access) and for backups for use in a small office (of two Macs). We have a late 2011 Intel MBP and a brand new MBA both running 10.8.3. We have two external 1TB hard drives that until now have been attached the MBP for storage and backing up that computer, which up until now was the only machine in use. The MBA is for a new employee and we need to share and work on the same files, both here in the office and ideally remotely too via Back to my Mac. The MBP needs constant access. The MBA only occasional. The TC has 7.6.3 firmware and we've set it up using AirPort Utility 6.2. It is currently attached to the MBP via ethernet and it has internet access via a Sagemcom router attached to TC's WAN port.
We've managed to set up a wireless network and both have wireless internet access through the TC
But there are so many issues I don't know where to begin - so I'll start with a description of what we're trying to achieve:
I planned to use the TC as the main server drive and place all the key folders and files there so that both of us can access them wirelessly and remotely. The MBP would back up to the TC and to one or two of the external hard drives - one being attached to the Mac via USB and the other being attached to the TC's USB port. We would back up the important data on the TC using SuperDuper and copy it to both external USB drives.
So , first of all, is that a sensible configuration? Should the 'server' be the one of the external hard drives attached to the TC USB port, backed up regularly to the TC using SuperDuper?But when you say 'So using USB drive does make sense if you want to use it as a file store', do you mean a USB drive plugged into the TC? I hope that I can attach an external drive to the TC so we can all access and read/write the content wirelessly via the TC network or remotely.
Yes, USB.. as it prevents the sparsebundle mixing with data files. I guess it does depend on how much data you are talking about.. you can use the TC internal disk if you are careful and setup the sparsebundle with fixed sizes once you create them..
And to be clear, I wasn't planning on backing up remotely via BTMM - only to access the shared folders on the TC data drive or USB external drive attached to it. I'm assuming that's ok?
Yes, that is fine. Sorry I got the impression you were going to do backup over internet.
What is the alternative? Having a Mac Mini that's always on? Do I need OS X Server etc.?
A mini would be great.. you don't need server edition.. but I would see how the TC goes.. since you have it and it is much lower power consumption device. It is just that its design is not really for file storage.
One big problem I have is to do with the sharing permissions. For everything on the TC or attached external drive attached to it, it says I have only custom access and every time I try to change permissions it says I don't have the permission to do that. And if I try to change the owner it says my user name is not valid.
How is the security setup on the TC?
The security is a bit tricky.. I must admit since I run windows computer in the network, that I simply turn on the guest account to read and write access. For a business setup that might not be adequate but it allows me full access to all the files.
If you setup the TC with user accounts then you are in trouble. That makes it very difficult to access, especially if one person already has the file open you may find a second user cannot login. I am not sure as I have avoided the security. IMHO it is meaningless.. since anyone with physical access to the TC can press the reset for one second and has full access.. and can add or change passwords. -
Airport Extreme blocking remote access for my NAS?
Having spent over 2 hours on the phone to both LG and Apple Care I still can't get my remote access working for my NAS. I don't know much about networks, but I am slowly having to learn! Apple care seem to think that the AEBS might not be compatible?? I've tried lots of forums, lots of google self help and exhausted the customer service options - you're probably thinking I should give up. Well this is my last chance saloon - any help would be greatly appreciated.
This is my set up:
NAS: LG N2R1DD2 2 Bay DVD Network Attached Storage 2 TB
AEBS: MB763LL/A (A1301)
ISP: Virgin cable
Everything else on the NAS works a treat, it's just the remote access that is the problem. LG spent a long time on the phone looking into this and said that it is the router. I've checked with Virgin and they confirm they do not block any ports, so am pretty sure issue is with router. I've set up the NAS correctly to enable DDNS and UPnP, which it reports as successful and working correctly. I've enabled NAT port forwarding on the router, and tried to manually open up port 80.
Any thoughts would be most welcome.
Thanks.I am not sure but I think you skipped a step. Look around for the use of consolidate library function.
I did the same thing and after I pointed to the right drive on the Airport Disk It worked flawlessly allowing me to stream to my powerbook from all over the house.
Unfortunately, once I went to bed and laptop and MyBook Pro went to sleep, I started havong problems.
Looks like this function of Airport n is still very Alpha.
Hope that helps -
Remote Access VPN with existing site-to-site tunnel
Hi there!
I have successfully configured my Cisco router to create a VPN tunnel to Azure. This is working fine. Now I am trying to add a remote access VPN for clients. I want to use IPsec and not PPTP.
I'm not a networking guy, but from what I've read, you basically need to add a dynamic crypto map for the remote access VPN to the crypto map on the external interface (AzureCryptoMap in this case). I've read that the dynamic crypto map should be applied after the non-dynamic maps.
The problem is that the VPN clients do not successfully negotiate phase 1. It's almost like the router does not try the dynamic map. I have tried specifying it to come ahead of the static crypto map policy, but this doesn't change anything. Here is some output from the debugging ipsec and isakmp:
murasaki#
*Oct 6 08:06:43: ISAKMP (0): received packet from 1.158.149.255 dport 500 sport 500 Global (N) NEW SA
*Oct 6 08:06:43: ISAKMP: Created a peer struct for 1.158.149.255, peer port 500
*Oct 6 08:06:43: ISAKMP: New peer created peer = 0x87B97490 peer_handle = 0x80000082
*Oct 6 08:06:43: ISAKMP: Locking peer struct 0x87B97490, refcount 1 for crypto_isakmp_process_block
*Oct 6 08:06:43: ISAKMP: local port 500, remote port 500
*Oct 6 08:06:43: ISAKMP:(0):insert sa successfully sa = 886954D0
*Oct 6 08:06:43: ISAKMP:(0):Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
*Oct 6 08:06:43: ISAKMP:(0):Old State = IKE_READY New State = IKE_R_MM1
*Oct 6 08:06:43: ISAKMP:(0): processing SA payload. message ID = 0
*Oct 6 08:06:43: ISAKMP:(0): processing vendor id payload
*Oct 6 08:06:43: ISAKMP:(0): vendor ID seems Unity/DPD but major 69 mismatch
*Oct 6 08:06:43: ISAKMP (0): vendor ID is NAT-T RFC 3947
*Oct 6 08:06:43: ISAKMP:(0): processing vendor id payload
*Oct 6 08:06:43: ISAKMP:(0): vendor ID seems Unity/DPD but major 198 mismatch
*Oct 6 08:06:43: ISAKMP:(0): processing vendor id payload
*Oct 6 08:06:43: ISAKMP:(0): vendor ID seems Unity/DPD but major 29 mismatch
*Oct 6 08:06:43: ISAKMP:(0): processing vendor id payload
*Oct 6 08:06:43: ISAKMP:(0): vendor ID seems Unity/DPD but major 245 mismatch
*Oct 6 08:06:43: ISAKMP (0): vendor ID is NAT-T v7
*Oct 6 08:06:43: ISAKMP:(0): processing vendor id payload
*Oct 6 08:06:43: ISAKMP:(0): vendor ID seems Unity/DPD but major 114 mismatch
*Oct 6 08:06:43: ISAKMP:(0): processing vendor id payload
*Oct 6 08:06:43: ISAKMP:(0): vendor ID seems Unity/DPD but major 227 mismatch
*Oct 6 08:06:43: ISAKMP:(0): processing vendor id payload
*Oct 6 08:06:43: ISAKMP:(0): vendor ID seems Unity/DPD but major 250 mismatch
*Oct 6 08:06:43: ISAKMP:(0): processing vendor id payload
*Oct 6 08:06:43: ISAKMP:(0): vendor ID seems Unity/DPD but major 157 mismatch
*Oct 6 08:06:43: ISAKMP:(0): vendor ID is NAT-T v3
*Oct 6 08:06:43: ISAKMP:(0): processing vendor id payload
*Oct 6 08:06:43: ISAKMP:(0): vendor ID seems Unity/DPD but major 164 mismatch
*Oct 6 08:06:43: ISAKMP:(0): processing vendor id payload
*Oct 6 08:06:43: ISAKMP:(0): vendor ID seems Unity/DPD but major 123 mismatch
*Oct 6 08:06:43: ISAKMP:(0): vendor ID is NAT-T v2
*Oct 6 08:06:43: ISAKMP:(0): processing vendor id payload
*Oct 6 08:06:43: ISAKMP:(0): vendor ID seems Unity/DPD but major 242 mismatch
*Oct 6 08:06:43: ISAKMP:(0): vendor ID is XAUTH
*Oct 6 08:06:43: ISAKMP:(0): processing vendor id payload
*Oct 6 08:06:43: ISAKMP:(0): vendor ID is Unity
*Oct 6 08:06:43: ISAKMP:(0): processing vendor id payload
*Oct 6 08:06:43: ISAKMP:(0): processing IKE frag vendor id payload
*Oct 6 08:06:43: ISAKMP:(0):Support for IKE Fragmentation not enabled
*Oct 6 08:06:43: ISAKMP:(0): processing vendor id payload
*Oct 6 08:06:43: ISAKMP:(0): vendor ID is DPD
*Oct 6 08:06:43: ISAKMP:(0):No pre-shared key with 1.158.149.255!
*Oct 6 08:06:43: ISAKMP : Scanning profiles for xauth ... Client-VPN
*Oct 6 08:06:43: ISAKMP:(0): Authentication by xauth preshared
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 1 against priority 1 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption AES-CBC
*Oct 6 08:06:43: ISAKMP: keylength of 256
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash SHA
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 2 against priority 1 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption AES-CBC
*Oct 6 08:06:43: ISAKMP: keylength of 128
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash SHA
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 3 against priority 1 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption AES-CBC
*Oct 6 08:06:43: ISAKMP: keylength of 256
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash MD5
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 4 against priority 1 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption AES-CBC
*Oct 6 08:06:43: ISAKMP: keylength of 128
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash MD5
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 5 against priority 1 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption 3DES-CBC
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash SHA
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Xauth authentication by pre-shared key offered but does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 6 against priority 1 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption 3DES-CBC
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash MD5
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Hash algorithm offered does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 7 against priority 1 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption DES-CBC
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash SHA
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 8 against priority 1 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption DES-CBC
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash MD5
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 0
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 1 against priority 2 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption AES-CBC
*Oct 6 08:06:43: ISAKMP: keylength of 256
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash SHA
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 2 against priority 2 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption AES-CBC
*Oct 6 08:06:43: ISAKMP: keylength of 128
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash SHA
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 3 against priority 2 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption AES-CBC
*Oct 6 08:06:43: ISAKMP: keylength of 256
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash MD5
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 4 against priority 2 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption AES-CBC
*Oct 6 08:06:43: ISAKMP: keylength of 128
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash MD5
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 5 against priority 2 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption 3DES-CBC
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash SHA
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Hash algorithm offered does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 6 against priority 2 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption 3DES-CBC
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash MD5
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Xauth authentication by pre-shared key offered but does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 7 against priority 2 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption DES-CBC
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash SHA
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 8 against priority 2 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption DES-CBC
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash MD5
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 0
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 1 against priority 10 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption AES-CBC
*Oct 6 08:06:43: ISAKMP: keylength of 256
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash SHA
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Xauth authentication by pre-shared key offered but does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 2 against priority 10 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption AES-CBC
*Oct 6 08:06:43: ISAKMP: keylength of 128
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash SHA
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Proposed key length does not match policy
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 3 against priority 10 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption AES-CBC
*Oct 6 08:06:43: ISAKMP: keylength of 256
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash MD5
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Hash algorithm offered does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 4 against priority 10 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption AES-CBC
*Oct 6 08:06:43: ISAKMP: keylength of 128
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash MD5
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Hash algorithm offered does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 5 against priority 10 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption 3DES-CBC
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash SHA
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 6 against priority 10 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption 3DES-CBC
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash MD5
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 7 against priority 10 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption DES-CBC
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash SHA
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 8 against priority 10 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption DES-CBC
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash MD5
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 0
*Oct 6 08:06:43: ISAKMP:(0):no offers accepted!
*Oct 6 08:06:43: ISAKMP:(0): phase 1 SA policy not acceptable! (local x.x.x.x remote 1.158.149.255)
*Oct 6 08:06:43: ISAKMP (0): incrementing error counter on sa, attempt 1 of 5: construct_fail_ag_init
*Oct 6 08:06:43: ISAKMP:(0): Failed to construct AG informational message.
*Oct 6 08:06:43: ISAKMP:(0): sending packet to 1.158.149.255 my_port 500 peer_port 500 (R) MM_NO_STATE
*Oct 6 08:06:43: ISAKMP:(0):Sending an IKE IPv4 Packet.
*Oct 6 08:06:43: ISAKMP:(0):peer does not do paranoid keepalives.
*Oct 6 08:06:43: ISAKMP:(0):deleting SA reason "Phase1 SA policy proposal not accepted" state (R) MM_NO_STATE (peer 1.158.149.255)
*Oct 6 08:06:43: ISAKMP (0): FSM action returned error: 2
*Oct 6 08:06:43: ISAKMP:(0):Input = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
*Oct 6 08:06:43: ISAKMP:(0):Old State = IKE_R_MM1 New State = IKE_R_MM1
*Oct 6 08:06:43: ISAKMP:(0):deleting SA reason "Phase1 SA policy proposal not accepted" state (R) MM_NO_STATE (peer 1.158.149.255)
*Oct 6 08:06:43: ISAKMP: Unlocking peer struct 0x87B97490 for isadb_mark_sa_deleted(), count 0
*Oct 6 08:06:43: ISAKMP: Deleting peer node by peer_reap for 1.158.149.255: 87B97490
*Oct 6 08:06:43: ISAKMP:(0):Input = IKE_MESG_INTERNAL, IKE_PHASE1_DEL
*Oct 6 08:06:43: ISAKMP:(0):Old State = IKE_R_MM1 New State = IKE_DEST_SA
*Oct 6 08:06:43: IPSEC(key_engine): got a queue event with 1 KMI message(s)
*Oct 6 08:06:47: ISAKMP (0): received packet from 1.158.149.255 dport 500 sport 500 Global (R) MM_NO_STATEmurasaki#
*Oct 6 08:06:43: ISAKMP (0): received packet from 1.158.149.255 dport 500 sport 500 Global (N) NEW SA
*Oct 6 08:06:43: ISAKMP: Created a peer struct for 1.158.149.255, peer port 500
*Oct 6 08:06:43: ISAKMP: New peer created peer = 0x87B97490 peer_handle = 0x80000082
*Oct 6 08:06:43: ISAKMP: Locking peer struct 0x87B97490, refcount 1 for crypto_isakmp_process_block
*Oct 6 08:06:43: ISAKMP: local port 500, remote port 500
*Oct 6 08:06:43: ISAKMP:(0):insert sa successfully sa = 886954D0
*Oct 6 08:06:43: ISAKMP:(0):Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
*Oct 6 08:06:43: ISAKMP:(0):Old State = IKE_READY New State = IKE_R_MM1
If I specify my key like a site-to-site VPN key like this:
crypto isakmp key xxx address 0.0.0.0
Then it does complete phase 1 (and then fails to find the client configuration). This suggests to me that the dynamic map is not being tried.
Configuration:
! Last configuration change at 07:55:02 AEDT Mon Oct 6 2014 by timothy
version 15.2
no service pad
service timestamps debug datetime localtime
service timestamps log datetime localtime
service password-encryption
no service dhcp
hostname murasaki
boot-start-marker
boot-end-marker
logging buffered 51200 warnings
aaa new-model
aaa authentication login client_vpn_authentication local
aaa authorization network default local
aaa authorization network client_vpn_authorization local
aaa session-id common
wan mode dsl
clock timezone AEST 10 0
clock summer-time AEDT recurring 1 Sun Oct 2:00 1 Sun Apr 3:00
ip inspect name normal_traffic tcp
ip inspect name normal_traffic udp
ip domain name router.xxx
ip name-server xxx
ip name-server xxx
ip cef
ipv6 unicast-routing
ipv6 cef
crypto pki trustpoint TP-self-signed-591984024
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-591984024
revocation-check none
rsakeypair TP-self-signed-591984024
crypto pki trustpoint TP-self-signed-4045734018
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-4045734018
revocation-check none
rsakeypair TP-self-signed-4045734018
crypto pki certificate chain TP-self-signed-591984024
crypto pki certificate chain TP-self-signed-4045734018
object-group network CLOUD_SUBNETS
description Azure subnet
172.16.0.0 255.252.0.0
object-group network INTERNAL_LAN
description All Internal subnets which should be allowed out to the Internet
192.168.1.0 255.255.255.0
192.168.20.0 255.255.255.0
username timothy privilege 15 secret 5 xxx
controller VDSL 0
ip ssh version 2
no crypto isakmp default policy
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
lifetime 3600
crypto isakmp policy 2
encr 3des
hash md5
authentication pre-share
group 2
lifetime 3600
crypto isakmp policy 10
encr aes 256
authentication pre-share
group 2
lifetime 28800
crypto isakmp key xxx address xxxx no-xauth
crypto isakmp client configuration group VPN_CLIENTS
key xxx
dns 192.168.1.24 192.168.1.20
domain xxx
pool Client-VPN-Pool
acl CLIENT_VPN
crypto isakmp profile Client-VPN
description Remote Client IPSec VPN
match identity group VPN_CLIENTS
client authentication list client_vpn_authentication
isakmp authorization list client_vpn_authorization
client configuration address respond
crypto ipsec transform-set AzureIPSec esp-aes 256 esp-sha-hmac
mode tunnel
crypto ipsec transform-set TRANS_3DES_SHA esp-3des esp-sha-hmac
mode tunnel
crypto dynamic-map ClientVPNCryptoMap 1
set transform-set TRANS_3DES_SHA
set isakmp-profile Client-VPN
reverse-route
qos pre-classify
crypto map AzureCryptoMap 12 ipsec-isakmp
set peer xxxx
set security-association lifetime kilobytes 102400000
set transform-set AzureIPSec
match address AzureEastUS
crypto map AzureCryptoMap 65535 ipsec-isakmp dynamic ClientVPNCryptoMap
bridge irb
interface ATM0
mtu 1492
no ip address
no atm ilmi-keepalive
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
interface Ethernet0
no ip address
shutdown
interface FastEthernet0
switchport mode trunk
no ip address
interface FastEthernet1
no ip address
spanning-tree portfast
interface FastEthernet2
switchport mode trunk
no ip address
spanning-tree portfast
interface FastEthernet3
no ip address
interface GigabitEthernet0
switchport mode trunk
no ip address
interface GigabitEthernet1
no ip address
shutdown
duplex auto
speed auto
interface Vlan1
description Main LAN
ip address 192.168.1.97 255.255.255.0
ip nat inside
ip virtual-reassembly in
ip tcp adjust-mss 1452
interface Dialer1
mtu 1492
ip address negotiated
ip access-group PORTS_ALLOWED_IN in
ip flow ingress
ip inspect normal_traffic out
ip nat outside
ip virtual-reassembly in
encapsulation ppp
ip tcp adjust-mss 1350
dialer pool 1
dialer-group 1
ipv6 address autoconfig
ipv6 enable
ppp chap hostname xxx
ppp chap password 7 xxx
ppp ipcp route default
no cdp enable
crypto map AzureCryptoMap
ip local pool Client-VPN-Pool 192.168.20.10 192.168.20.15
no ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat translation timeout 360
ip nat inside source list SUBNETS_AND_PROTOCOLS_ALLOWED_OUT interface Dialer1 overload
ip nat inside source static tcp 192.168.1.43 55663 interface Dialer1 55663
ip nat inside source static tcp 192.168.1.43 22 interface Dialer1 22
ip nat inside source static udp 192.168.1.43 55663 interface Dialer1 55663
ip access-list extended AzureEastUS
permit ip 192.168.20.0 0.0.0.255 172.16.0.0 0.15.255.255
permit ip 192.168.1.0 0.0.0.255 172.16.0.0 0.15.255.255
ip access-list extended CLIENT_VPN
permit ip 172.16.0.0 0.0.0.255 192.168.20.0 0.0.0.255
permit ip 192.168.1.0 0.0.0.255 192.168.20.0 0.0.0.255
ip access-list extended PORTS_ALLOWED_IN
remark List of ports which are allowed IN
permit gre any any
permit esp any any
permit udp any any eq non500-isakmp
permit udp any any eq isakmp
permit tcp any any eq 55663
permit udp any any eq 55663
permit tcp any any eq 22
permit tcp any any eq 5723
permit tcp any any eq 1723
permit tcp any any eq 443
permit icmp any any echo-reply
permit icmp any any traceroute
permit icmp any any port-unreachable
permit icmp any any time-exceeded
deny ip any any
ip access-list extended SUBNETS_AND_PROTOCOLS_ALLOWED_OUT
deny tcp object-group INTERNAL_LAN any eq smtp
deny ip object-group INTERNAL_LAN object-group CLOUD_SUBNETS
permit tcp object-group INTERNAL_LAN any
permit udp object-group INTERNAL_LAN any
permit icmp object-group INTERNAL_LAN any
deny ip any any
mac-address-table aging-time 16
no cdp run
ipv6 route ::/0 Dialer1
route-map NoNAT permit 10
match ip address AzureEastUS CLIENT_VPN
route-map NoNAT permit 15
banner motd Welcome to Murasaki
line con 0
privilege level 15
no modem enable
line aux 0
line vty 0
privilege level 15
no activation-character
transport preferred none
transport input ssh
line vty 1 4
privilege level 15
transport input ssh
scheduler max-task-time 5000
scheduler allocate 60000 1000
ntp update-calendar
ntp server au.pool.ntp.org
end
Any ideas on what I'm doing wrong?Hi Marius,
I finally managed to try with the official Cisco VPN client on Windows. It still fails at phase 1, but now talks about 'aggressive mode', which didn't seem to be mentioned in the previous logs. Any ideas?
*Oct 9 20:43:16: ISAKMP (0): received packet from 192.168.1.201 dport 500 sport 49727 Global (N) NEW SA
*Oct 9 20:43:16: ISAKMP: Created a peer struct for 192.168.1.201, peer port 49727
*Oct 9 20:43:16: ISAKMP: New peer created peer = 0x878329F0 peer_handle = 0x80000087
*Oct 9 20:43:16: ISAKMP: Locking peer struct 0x878329F0, refcount 1 for crypto_isakmp_process_block
*Oct 9 20:43:16: ISAKMP: local port 500, remote port 49727
*Oct 9 20:43:16: ISAKMP:(0):insert sa successfully sa = 886697E0
*Oct 9 20:43:16: ISAKMP:(0): processing SA payload. message ID = 0
*Oct 9 20:43:16: ISAKMP:(0): processing ID payload. message ID = 0
*Oct 9 20:43:16: ISAKMP (0): ID payload
next-payload : 13
type : 11
group id : timothy
protocol : 17
port : 500
length : 15
*Oct 9 20:43:16: ISAKMP:(0):: peer matches *none* of the profiles
*Oct 9 20:43:16: ISAKMP:(0): processing vendor id payload
*Oct 9 20:43:16: ISAKMP:(0): vendor ID seems Unity/DPD but major 215 mismatch
*Oct 9 20:43:16: ISAKMP:(0): vendor ID is XAUTH
*Oct 9 20:43:16: ISAKMP:(0): processing vendor id payload
*Oct 9 20:43:16: ISAKMP:(0): vendor ID is DPD
*Oct 9 20:43:16: ISAKMP:(0): processing vendor id payload
*Oct 9 20:43:16: ISAKMP:(0): processing IKE frag vendor id payload
*Oct 9 20:43:16: ISAKMP:(0):Support for IKE Fragmentation not enabled
*Oct 9 20:43:16: ISAKMP:(0): processing vendor id payload
*Oct 9 20:43:16: ISAKMP:(0): vendor ID seems Unity/DPD but major 123 mismatch
*Oct 9 20:43:16: ISAKMP:(0): vendor ID is NAT-T v2
*Oct 9 20:43:16: ISAKMP:(0): processing vendor id payload
*Oct 9 20:43:16: ISAKMP:(0): vendor ID is Unity
*Oct 9 20:43:16: ISAKMP : Scanning profiles for xauth ... Client-VPN
*Oct 9 20:43:16: ISAKMP:(0): Authentication by xauth preshared
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 1 against priority 1 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash SHA
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 256
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 2 against priority 1 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 256
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 3 against priority 1 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash SHA
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 256
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 4 against priority 1 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 256
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 5 against priority 1 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash SHA
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 128
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 6 against priority 1 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 128
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 7 against priority 1 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash SHA
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 128
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 8 against priority 1 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 128
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 9 against priority 1 policy
*Oct 9 20:43:16: ISAKMP: encryption 3DES-CBC
*Oct 9 20:43:16: ISAKMP: hash SHA
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP:(0):Xauth authentication by pre-shared key offered but does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 10 against priority 1 policy
*Oct 9 20:43:16: ISAKMP: encryption 3DES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP:(0):Hash algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 11 against priority 1 policy
*Oct 9 20:43:16: ISAKMP: encryption 3DES-CBC
*Oct 9 20:43:16: ISAKMP: hash SHA
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP:(0):Preshared authentication offered but does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 12 against priority 1 policy
*Oct 9 20:43:16: ISAKMP: encryption 3DES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP:(0):Hash algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 13 against priority 1 policy
*Oct 9 20:43:16: ISAKMP: encryption DES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 14 against priority 1 policy
*Oct 9 20:43:16: ISAKMP: encryption DES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 0
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 1 against priority 2 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash SHA
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 256
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 2 against priority 2 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 256
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 3 against priority 2 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash SHA
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 256
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 4 against priority 2 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 256
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 5 against priority 2 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash SHA
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 128
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 6 against priority 2 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 128
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 7 against priority 2 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash SHA
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 128
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 8 against priority 2 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 128
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 9 against priority 2 policy
*Oct 9 20:43:16: ISAKMP: encryption 3DES-CBC
*Oct 9 20:43:16: ISAKMP: hash SHA
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP:(0):Hash algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 10 against priority 2 policy
*Oct 9 20:43:16: ISAKMP: encryption 3DES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP:(0):Xauth authentication by pre-shared key offered but does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 11 against priority 2 policy
*Oct 9 20:43:16: ISAKMP: encryption 3DES-CBC
*Oct 9 20:43:16: ISAKMP: hash SHA
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP:(0):Hash algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 12 against priority 2 policy
*Oct 9 20:43:16: ISAKMP: encryption 3DES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP:(0):Preshared authentication offered but does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 13 against priority 2 policy
*Oct 9 20:43:16: ISAKMP: encryption DES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 14 against priority 2 policy
*Oct 9 20:43:16: ISAKMP: encryption DES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 0
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 1 against priority 10 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash SHA
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 256
*Oct 9 20:43:16: ISAKMP:(0):Xauth authentication by pre-shared key offered but does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 2 against priority 10 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 256
*Oct 9 20:43:16: ISAKMP:(0):Hash algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 3 against priority 10 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash SHA
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 256
*Oct 9 20:43:16: ISAKMP:(0):Preshared authentication offered but does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 4 against priority 10 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 256
*Oct 9 20:43:16: ISAKMP:(0):Hash algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 5 against priority 10 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash SHA
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 128
*Oct 9 20:43:16: ISAKMP:(0):Proposed key length does not match policy
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 6 against priority 10 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 128
*Oct 9 20:43:16: ISAKMP:(0):Hash algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 7 against priority 10 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash SHA
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 128
*Oct 9 20:43:16: ISAKMP:(0):Proposed key length does not match policy
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 8 against priority 10 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 128
*Oct 9 20:43:16: ISAKMP:(0):Hash algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 9 against priority 10 policy
*Oct 9 20:43:16: ISAKMP: encryption 3DES-CBC
*Oct 9 20:43:16: ISAKMP: hash SHA
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 10 against priority 10 policy
*Oct 9 20:43:16: ISAKMP: encryption 3DES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 11 against priority 10 policy
*Oct 9 20:43:16: ISAKMP: encryption 3DES-CBC
*Oct 9 20:43:16: ISAKMP: hash SHA
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 12 against priority 10 policy
*Oct 9 20:43:16: ISAKMP: encryption 3DES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 13 against priority 10 policy
*Oct 9 20:43:16: ISAKMP: encryption DES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 14 against priority 10 policy
*Oct 9 20:43:16: ISAKMP: encryption DES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 0
*Oct 9 20:43:16: ISAKMP:(0):no offers accepted!
*Oct 9 20:43:16: ISAKMP:(0): phase 1 SA policy not acceptable! (local xxxx remote 192.168.1.201)
*Oct 9 20:43:16: ISAKMP (0): incrementing error counter on sa, attempt 1 of 5: construct_fail_ag_init
*Oct 9 20:43:16: ISAKMP:(0): Failed to construct AG informational message.
*Oct 9 20:43:16: ISAKMP:(0): sending packet to 192.168.1.201 my_port 500 peer_port 49727 (R) AG_NO_STATE
*Oct 9 20:43:16: ISAKMP:(0):Sending an IKE IPv4 Packet.
*Oct 9 20:43:16: ISAKMP:(0):peer does not do paranoid keepalives.
*Oct 9 20:43:16: ISAKMP:(0):deleting SA reason "Phase1 SA policy proposal not accepted" state (R) AG_NO_STATE (peer 192.168.1.201)
*Oct 9 20:43:16: ISAKMP:(0): processing KE payload. message ID = 0
*Oct 9 20:43:16: ISAKMP:(0): group size changed! Should be 0, is 128
*Oct 9 20:43:16: ISAKMP (0): incrementing error counter on sa, attempt 2 of 5: reset_retransmission
*Oct 9 20:43:16: ISAKMP (0): Unknown Input IKE_MESG_FROM_PEER, IKE_AM_EXCH: state = IKE_READY
*Oct 9 20:43:16: ISAKMP:(0):Input = IKE_MESG_FROM_PEER, IKE_AM_EXCH
*Oct 9 20:43:16: ISAKMP:(0):Old State = IKE_READY New State = IKE_READY
*Oct 9 20:43:16: %CRYPTO-6-IKMP_MODE_FAILURE: Processing of Aggressive mode failed with peer at 192.168.1.201
*Oct 9 20:43:16: ISAKMP:(0):deleting SA reason "Phase1 SA policy proposal not accepted" state (R) AG_NO_STATE (peer 192.168.1.201)
*Oct 9 20:43:16: ISAKMP: Unlocking peer struct 0x878329F0 for isadb_mark_sa_deleted(), count 0
*Oct 9 20:43:16: ISAKMP: Deleting peer node by peer_reap for 192.168.1.201: 878329F0
*Oct 9 20:43:16: ISAKMP:(0):Input = IKE_MESG_INTERNAL, IKE_PHASE1_DEL
*Oct 9 20:43:16: ISAKMP:(0):Old State = IKE_READY New State = IKE_DEST_SA
*Oct 9 20:43:16: IPSEC(key_engine): got a queue event with 1 KMI message(s)
*Oct 9 20:43:21: ISAKMP (0): received packet from 192.168.1.201 dport 500 sport 49727 Global (R) MM_NO_STATE
*Oct 9 20:43:26: ISAKMP (0): received packet from 192.168.1.201 dport 500 sport 49727 Global (R) MM_NO_STATE -
Remote Access Management Console - configuration issue with Network Location Server
2012 Std R2
The remote Access management console operation status shows all green except for network location server .
Error: There is no response from the network location server URL. DirectAccess connectivity might not work as expected, and DirectAccess clients located inside the corporate network might not be able to reach internal resources.
Resolution listed as:
1. Configure the network location server on a server that is highly available to clients on the internal network.
2. If the network location server is running on the Remote Access server, ensure that IIS is running, and that the URL is available.
The remote access server is located on this server. IIS is running. What URL: show I be looking at?
Any other thoughts so I can get remote access working.
l also am getting a remote access error for IPV6, could this be a cause:
RoutingDomainID- {00000000-0000-0000-0000-000000000000}: Unable to add the interface {D37062B2-A3E0-4496-A459-9E0BBCE5423C} with the Router Manager for the IPV6 protocol. The following error occurred: Cannot complete this function.
John LenzHi John,
please follow the steps to reinstall TCP/IP stack.
1.Restart your PC into Safe Mode with Networking.
2.
Edit your registry. Delete the following keys:
HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Services/Winsock
HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Services/Winsock2
3.
Open the nettcpip.inf file in your %winroot%/inf folder
(%winroot% is usually c:/windows).
Find the [MS_TCPIP.PrimaryInstall] section. Change the Characteristics value from 0xA0 to 0x80.
Open the properties of the network connection you want to fix. In the General tab, click on the Install button. Click on the Have Disk button, and point the location to %winroot%/inf. After that select TCP/IP (not version 6).
4.
Now you would notice that you can uninstall TCP/IP!
Do that, then restart the PC.
Go back to your network connection, and install TCP/IP again as per the above. After another reboot, you should be up and running.
I also noted that the XP network repair tool may yank out the ISA 2004 firewall client stuff. Just run the firewall clinet repair or install it again to fix that problem after you did your reboot. Before you do this kind of crazy stuff.
5.
This along with a TCP/IP reset using the netsh command:
netsh int ip reset resetlog.txt
wish you have a nice thanksgiving too
Regards,
Mike
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Remote access is rejected by the default configuration?
I installed a SunOne Directory Server 5.2 following the installation wizard. I can access it from a LDAP browser installed on the same machine. However, when I tried to connect the service from a remote machine, it gives me "[ERROR 91] Can't connect to the LDAP server". The server and the client machine are in the same domain and don't have access problem for other services ( http, soap...etc).
Does anybody know what the problem might be? Is there any particular setting in SunOne Directory Server that controls this.
Thanks in advance.Hi,
Sun Directory Server 5.x requires fully qualified domain names that can be resolved from all machines.
Make sure the hostname contains a DNS name.
Regards,
Ludovic. -
Routing and Remote Access VPN DHCP error
I have a strange problem.
I have a client that is using Server 2012 Standard.
On this server they have Routing and Remote Access configured for VPN client access. Their users that are working outside the office connect to the VPN to access the internal network.
The VPN works fine for the most part. Recently however, it has started having issues.
Periodically (about once every 8 days) I will hear from them that they cannot connect and that they get error 720. I will check the server and the server will have the following errors in the event log:
Warning: No IP address is available to hand out to the dial-in client.
If you check DHCP the server is running fine and will hand out local addresses but it will not hand out addresses to VPN clients. Also the addresses that it HAS previously handed out to VPN clients will not show in the address leases.
The solution strangly enough is to disconnect and reconnect a the VPN client connection that the server has connecting it to a offsite server that it does a SQL sync with.
Any ideas as to what might be causing this? If need be I can post more detailed logs but I am not sure what logs even to post or what data to collect.
Any help is greatly appreciated.I am experiencing the same issue on a Windows 2008R2 SP1 RAS server. The above statement About increasing the lease time on DHCP does not resolve the problem.
I am also Searching for a Solutions to this issue.
Up to now I have done the Following :
1. Increased the scope/ cleared IP's in DHCP.
2. Ensure that the DHCP server is accessable.
3. Created a Manual Scope on RRAS configurations settings (then clients can connect but cannot access resources on the network). Changing Back to DHCP, you recieve the same 720 Error.
4. Stop and started the DHCP services on the DHCP Server.
5. Stop and Started RRAS Services on RRAS server.
The Only Indication is, that DHCP for some reason does not lease out Addresses to the RRAS server.. -
ASA Remote Access VPN Clients - Multiple DNS Suffixes?
Hi community!
I am setting up a new remote access VPN using the traditional IPSec client via ASA 5515-X runnning OS 8.6.1(5).
We require to provide each client multiple DNS suffixes, but are only to provide a single DNS suffix in the grouip policy.
I have tested using an external DHCP server, but using our Windows Server 2008 infrastructure and Option 119 the list is not provided to clients, and I have read that Windows 7 clietns may ignore this option anyway.
Other than umanually configuring the clients , does anybody have any other suggestions on how we may get this to work?
Full marks for helpful posts!
Kind regards, Ash.Hi
I am looking into the same issue, and I am finding conflicting documentation about this and wondered if you got the answers you were looking for.
I have a remote access requirement for users from separate AD's to authenticate through an ASA.
I was reading about Global Catalogue Server but this is not specifically what I want; and also creating a new AAA server group but the user would need to accept which group to use when they log in
Regards
Maybe you are looking for
-
Pdf object postMessage not working in FF 22
Hi, After updating my FF to 22, i seen pdf object postMessage function does not working. We used adbove livecycle intraactive pdf forms to collect the data from the user. When user click the save button from the pdf, postMessage function called, but
-
das Update für den Adobe Raw Converter 3.5 für CS2 und Elements 4.0 (u.a. für Nikon D2Xs) ist unter www.adobe.com/products/photoshop/cameraraw.html zum kostenlosen download bereit.
-
Moving disabled user to another OU
Hi, I am using Oracle Identity Manager 9.1.9.1 with AD connector 9.1.1. When a user is disabled in oim (when the Disable check box in OIM is checked), I would like the user to be automatically moved to an another OU for disabled users. I have created
-
Sync arbitrary number of episodes of podcasts (not 1, 3, 5, 10 or all)
Hi - I'd like to synchronize a user-defined number of episodes of podcasts with my iPod and not be restricted to 1, 3, 5 10 or all (whatever is the sync logic). This is strange that this is not just a parameter for users to decide. Did I miss somethi
-
Having trouble getting rid of popup adware/malware, primarily in Safari. TuneUpMyMac and MacKeeper persistently open new windows when I navigate to any number of sites. I have never downloaded or registered for their software, so I suspect this is a