USB - some peripherals not working
I recently had to reformat my drive and reinstall WinXP.
Since then, there have been problems with my USB connection. Some devices are not recognised at all.
For example, my webcam - not even as if it's connected
My Digital camera - works fine. Even seems to be running at USB2.0 speed
My Smartphone - brings up an "Unknown USB device error" then can't install.
Add to this, I have an unknown "USB Device" in my Device manager. When I try to instal a driver for this, it can't find anything.
I should point out that I have installed the WinXP Service Pack and am up to date with all my updates.
I'm really not an expert, so don't know what else to do. Could it be that my system is missing some BIOS updates?
Hi Guys
I've tried this and still it doesn't work. I still have a "Other devices"-> "USB devices" showing.
I even tried reinstalling SP1 after running the new INF files.
Any advice?
Similar Messages
-
External USB HD does not work with HAL:
External USB HD does not work with HAL:
From the last 10 days the HAL auto-mount with ntfs-3g file system of my external hard drive does not woks.
But the manual mount procedure with the command mount -t ntfs-3g /dev/sdb* /mnt/XYZ works.
I've followed the instructions in the wiki: http://wiki.archlinux.org/index.php/HAL and the system has worked up to the last kernel or HAL update.
My fat32 usb-stick works without any problem.
If I try to open the device with KDE it appears an error popup wit this message:
TODO: have to rethink extra options
Error: kio_media_mount_helper
The log from the kernel.log is
Nov 6 22:03:16 myhost usb 5-1: new high speed USB device using ehci_hcd and address 4
Nov 6 22:03:16 myhost usb 5-1: configuration #1 chosen from 1 choice
Nov 6 22:03:17 myhost Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 6 22:03:17 myhost ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 6 22:03:17 myhost Initializing USB Mass Storage driver...
Nov 6 22:03:17 myhost scsi6 : SCSI emulation for USB Mass Storage devices
Nov 6 22:03:17 myhost usb-storage: device found at 4
Nov 6 22:03:17 myhost usb-storage: waiting for device to settle before scanning
Nov 6 22:03:17 myhost usbcore: registered new interface driver usb-storage
Nov 6 22:03:17 myhost USB Mass Storage support registered.
Nov 6 22:03:22 myhost scsi 6:0:0:0: Direct-Access WDC WD32 00JB-00KFA0 0811 PQ: 0 ANSI: 0
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sdb: sdb1
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Attached SCSI disk
Nov 6 22:03:22 myhost sd 6:0:0:0: Attached scsi generic sg2 type 0
Nov 6 22:03:22 myhost usb-storage: device scan complete
and the error.log is
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Do you have some idea ....
Bye.I have done the following:
Downloaded the patched hal version.
used makepkg in /abs/local/trunk/ to create a pkg for pacman
used sudo pacman -U pkgname to install it.
used sudo nano /etc/hal/fdi/policy/preferences.fdi to create the fdi file with the following content:
saved the file and removed my ntfs entryes from fstab and rebooted. and still there is no automount off ntfs partitions.
have i done something wrong?
br fjodork
WARNING: what follows is a guide of what did work for me, I'm still in an early stage of learning linux, so please correct me if anything of what follows is wrong/dangerous/stupid. As I said, this worked for me, it's not pretty, since I was learning each step on the fly and I'm sure there are better ways to do this.
So fjodork, you seem to have done the the necessary steps, though i couldn't get it to work until i first removed hal without dependencies
pacman -Rd hal
it will give you some warning about the dependencies, ignore it since we are reinstalling hal in a few steps.
First i tried to follow Raymano's link, obviously it showed me nothing in the browser so I thought it might be a broken link.
So I downloaded the source tarball from here http://hal.freedesktop.org/releases/hal-0.5.10.tar.gz
unpacked it changed the /tools/hal-storage-mount.c as per Milfadoodle's instructions.
at first I tried to compile directly from source, the process would finish without a glitch though after reboot nothing changed, as if hal weren't
installed, i guess there were issues with paths. anyway read on
Then repacked the source in tarball, copied it to /var/abs/extra/system/hal and modified the PKGBUILD as follows
makedepends=('pkgconfig' 'gperf')
options=('!libtool')
install=hal.install
source=(${pkgname}-${pkgver}.tar.gz #removed url so makepkg looks in the current directory for the tarball
hal
hal-policy.patch
cryptsetup_location.patch
hal-0.5.9-hide-diagnostic.patch
ntfs3g-valid-options.patch)
md5sums=('6641c30a27c00485c6accac5110ff911' # replace with md5sum of your package's sourceball (run md5sum filename)
'882f67668cb14a0a9e4a27ef22278027'
'5ba8b610aa9763a5f42b9f7cbd7a86ad'
then makepkg (i had to add --asroot, don't ask why
and finally pacman -U hal-0.5.10-1-i686.pkg
another reboot and everything worked without a glitch!:D (yeah i know i still haven't got rid of the reboot mentality )
I have also put the policy files as per the wiki instructions.
PS: I know this is a dirty way to getting things done but as i said, I'm just starting
If anyone could comment/correct/explain this post I'd be more than happy, the automount issue was bothering me for about a month now (you'll say why do I need ntfs in the first place? well, I only recently switched for Linux as my primary OS, these are some relics of the M$ era -
USB hub does not work! Help
I was attempting to install a KVM switch for my G4 and G5 that required me attaching my keyboard and mouse to the usb port on the back of the monitor.
The USB hub does not work! Monitor cable has no bent pins, and works perfectly for video with all my Mac's, G4's, G5's. The problem is I have had this monitor awhile and never tried these ports so apple won't help.
Anyone have any suggestions why these ports don't work and if there is a fix?
Can any one recommend a KVM switch that supports ADC, and USB so I bypass this hub.
ThanksSome USB 2.0 hardware works very well w/USB 3.0 & some don't. Suggest that you contact the sound card manufacturer & ask them. Perhaps they can recommend a work-a-round.
Another user posted about the same problem some weeks ago regarding a sound card. -
T420 USB Ports do not work after installing XP
Hello my office has been using Lenovo's for some time now but we recently purchased a T420 and installed Windows XP SP3 on it. The issue we are having is that the uSB ports do not work. I have tried every driver I can find but still no luck, can anyone help?
hey chris0277,
could you check in Device Manager and see if there is any ? or ! symbol on the USB area.
If there is, i do recommend uninstalling the drivers from it and then visit http://support.lenovo.com and update your unit
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article. -
Hi, I've been having some issues with my macbook:
(1) My front USB port is not working. I've been getting the following message everytime I restart (even when nothing is pluged in): "Becayse a USB devide was drawing too much power from your computer, one or more of your USB devices have been disabled". I've tried resetting the PRAM and SMC, this does not work.
(2) My built-in iSight no longer works. I tried using skype and photobooth and the camera is not detected. I looked in my system profilers and isight is listed but I'm not sure what this information tells me (see below):
Built-in iSight:
Product ID: 0x8507
Vendor ID: 0x05ac (Apple Inc.)
Version: 4.42
Serial Number: 8TA5B04NPDCJ6F00
Speed: Up to 480 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0x24600000 / 2
Current Available (mA): 500
Current Required (mA): 500
(3) My battery drains when my macbook is in sleep mode (this was not happening before).
(4) My computer seems to be getting really hot. This cause the bottom rubber of my macbook to start peeling off. I've downloaded iStat to keep and eye on the temperature but I'm not sure if this is related to my other issues.
Does anyone have any idea what could be causing this? Are there any tests I can run? I'm not sure if these issues are related or not. Please help.chantal102 wrote: ...restarting and holding the D key but nothing happens when I do this...
According to the AHT instructions on p. 61 of the manual for your 13-inch Mid 2010 MacBook, http://manuals.info.apple.com/en_US/macbook_13inch_mid2010_ug.pdf you did the correct restart process. To me, the fact that AHT does not work either is one more indicator of likely hardware trouble.
chantal102 wrote: .. I would like to try everything I can do myself before bringing it in...
If nothing else you try fixes your issue, try restoring your Mac's software. If neither a Time Machine restore nor a complete restore to factory original condition (p.60) corrects your trouble, I think you are left with the choice of AASP service or deciding whether it is time for a new Mac.
Message was edited by: EZ Jim
Mac OSX 10.8.2 -
Standard Enhanced PCI to USB host Controller not working
Plz help me its suck i can't find any driver for this USB port its suck all my usb ports are not working they not accepting any usb or some thing or intel managment interface also not working plz help me . Thankyou
Us Device PCI
Device PCI\VEN_8086&DEV_1E26&SUBSYS_17F8103C&REV_04\3&11583659&0&E8 was configured.
Driver Name: usbport.inf
Class GUID: {36FC9E60-C465-11CF-8056-444553540000}
Driver Date: 06/21/2006
Driver Version: 6.2.9200.16384
Driver Provider: Microsoft
Driver Section: EHCI.Dev.NT
Driver Rank: 0xFF2005
Matching Device ID: PCI\CC_0C0320
Outranked Drivers:
Device Updated: false
Intel Mangagment interface
Device PCI
Device PCI\VEN_8086&DEV_1E3A&SUBSYS_17F8103C&REV_04\3&11583659&0&B0 was configured.
Driver Name: null
Class GUID: {00000000-0000-0000-0000-000000000000}
Driver Date:
Driver Version:
Driver Provider:
Driver Section:
Driver Rank: 0x0
Matching Device ID:
Outranked Drivers:
Device Updated: falseWhat is the installed operating system?
In which region of the world are you located?
Try the following Intel Management Engine software
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-113870-1&cc=us&dlc=en&lc=en...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
Apple USB keyboard does not work with one internal usb port
Hi everyone,
hope someone can help me to solve my problem. I have a MPB13 retina late 2013 since something like 3 months. I have additional screen (dell), usb wired keyboard (apple) and BT magic mouse.
Since a few days, my usb keyboard does not work well. It only want to work properly when plugged to the rights side usb port internal port and not anymore on the left one. It also work on a usb external concentrator. Before, I had no problem, it worked perfectly. There was no problem such as cofee on it...
After searching the web on such problem, I tries a few things such as:
I tried the keyboard on another computer (windows): works fine
I tried usb stick and external DVD reading on the left internal usb ports: works fine
I switch the MPB off and turn it back on: the usb keyboard still does not work on the left usb port
I tried the SMC and PRAM reset : nothing
Any idea ??
Thanks
GuillaumeI'm facing the same problem, found any solutions ?
-
External USB keyboard does not work with T60 after BIOS upgrade
External USB keyboard does not work properly with T60 after 2.26-1.07 BIOS upgrade.
It does the same with or without the docking station.
Anyone else bumped into this problem yet?
Has someone found any fixes for this?
tHi and welcome the forum!
Try uninstalling all USB hub devices from the device manager and reinstalling them again, particularly the keyboard's.
v2.26 is supposed to fix the issue according to lenovo:- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-63024
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel -
Hi I have problems with not working USB ports. It used to work. I downloaded actual drivers at msi.com for my gaming notebook GX 60 Destroyer and now my USB ports does not work. What should I do?
What driver have you updated?
Try to do an EC firmware reset by removing the battery and the AC adapter then put the battery back with AC adapter attached.
Same questions like Pegasus asked, does all ports not working? which one exactly? What OS are you using?
Have you done any changes to the system? (for example: self-install OS or changing OS) -
Some PDFs not working in Preview. Mac created PDFS work but windows created PDFS dont
Some PDFs not working in Preview. I installed adobe reader and then deleted it because the software was aweful and PDFs have been haveing issues ever since. I can open up PDFs created on my Mac in preview just fine...
But when I try and open a PDF created on a windows computer it says:
"Please wait...
If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document.
You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by visiting http://www.adobe.com/products/acrobat/readstep2.html.
For more assistance with Adobe Reader visit http://www.adobe.com/support/products/ acrreader.html.
Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Mac is a trademark of Apple Inc., registered in the United States and other countries. Linux is the registered trademark of Linus Torvalds in the U.S. and other countries. "
I am not sure why where the PDF was created would make a difference but couldnt help but notice that was the difference between the PDF files that work and the ones that give that message. I can view the PDFs on a windows computer just fine and never had issues untill adobe, it seems to have messed up PDFs on my Mac and I am so frustrated with them. I have searched my computer for any remaining adobe files, deleted them and restarted my computer but I am still getting this message.Uninstall Adobe Reader's plug-in.
Remove the following two files from /Library/Internet Plug-Ins/:
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
Open Safari Preferences > Extensions. Do you see AdobePDFViewer? If yes. disable.
Log out/in and test.
Another option is to download and install this plugin. Schubert|it PDF Browser Plugin . PDF Browser Plugin 2 is free for not-for-profit activities if used at home or at educational institutions.
http://www.schubert-it.com/pluginpdf/ -
i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???
Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?
-
Audio output and left USB port is not working!
Hi! I have MacBook Air 13" late 2010, Audio output and left USB port is not working!
What happened?
Part No.: Z0JH000TE RSIf the left USB port doesnt work with an external mouse its seems to be a hardware malfunction of this USB port.
The newest BIOS is already installed?
Have you removed all USB ports from device manager and restarted your notebook?
If you have already tried this, contact an authorized service provider. The guys can try to fix this issue and it should be covered by warranty, if you still have warranty on this notebook. :) -
Hp pavilion g6-2305tx left side usb 3.0 not working after installing windows 7 home premium
Hi ,
The left usb ports are not working on my pavillion g6 2305tx after a fresh win 7 installation. Already installed chipset drivers, but this doesnt solve the problem.
Please check the screenshot below.
Kindly help.
ThanksHi,
Please try installing window 7 USB 3.0 driver for the following issue
For Win 7 64 bit
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?
cc=us&lc=en&dlc=en&softwareitem=ob-102571-1
For Win 7 32 bit
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescript
ion.jsp?
cc=us&prodSeriesId=5260575&prodNameId=5260578&taskId=135&swItem=w
k-106309-1
Regards,
Sumit
I am an HP Employee.
The opinions expressed here are my personal opinions, not of HP.
Make it easier for other people to find solutions, by marking an answer “Accept as Solution” if it solves your problem.
Click on Kudos if my post helped you. -
Hi I downgraded the laptop from windows 8 to windows 7 64 bit. Two of my USB ports are not working and cant find the right drivers for it. Can you please direct me, where I can download and update the drivers? Thanks in advance.
ShaweHi:
Download and instal both of these drivers and reboot.
http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229463&swItemId=ob_125616_1&swEnvOid=405...
http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229463&swItemId=ob_123787_1&swEnvOid=405... -
Keyboard: some keys not working
Some keys not working. Need help/suggestions. Not great with computers so PLEASE give details/steps re: how to do what you suggest - thanks!
Details: intel based iMac running snow leopard 10.6.8. Apple wireless/bluetooth keyboard (came with the iMac).
Some keys suddenly stopped working: space, tab, capLock, option key to the right of space bar (one on the left works), down arrow
The problem happens in various programs (safari, pages, etc)
The keyboard is fine on another iMac
A different keyboard is fine on this/the involved iMac
(nutshell: keyboard works fine - computer works fine, unless they're together)
Here's what's been tried/checked:
-checked the settings for universal access ("mouse keys" are off) and checked for any bluetooth keyboard shortcuts.
-in system preferences "speech" is not set for "speak selected text when the key is pressed" - this is not checked/selected
-tried creating a new user but had the same issue so it's computer-wide rather than just a user account
-removed the keyboard and reconnected (using the +/- signs and "disconnect" and putting in a new code of numbers to pair keyboard)
-language/text is set for english
-did the keyboard viewer and the keys in question did NOT highlight when pressed (but don't forget the entire keyboard is fine on a different computer so thekeys aren't the issue)
-"slow keys" is turned off re: keyboard in system preferences.
Any help is welcomed. It's frustrating knowing the keyboard works, just not with this computer. Please help. Many thanks!yes - not sure how this works...if you can see my original post there are a lot of details in there. If you can't...
nutshell: the keyboard works on a different iMac
a different keyboard works on this/the involved iMac
I tried to create a different user and the keyboard still does not work so it is computer-wide
I also removed the keyboard from the computer (using the +/- symbols and disconnecting and then repairing it. The problem remained
Thanks for any help. It's crazy that the keyboard is fine and the computer is fine but together, there's the problem.
Thank you!!!
Maybe you are looking for
-
Appraisal document after 'Completed' status
In OSA, the status of the document is completed. But the apporval pro9cess is not triggered and I am not able to use the 'Approced', 'Rejected' or other subsequent statuses. Any idea of how to do it, through workflow or some config settings? Also, I
-
Hi Experts, When we import some material from any country, we pay material cost to the import vendor and other expeses like clearing charges, freight, insurance, custom duty etc to different - different local vendors, Now we want to get a cost sheet
-
Trying to export RAW originals from Aperature 3 to LightRoom 4: I choose File>Export>Originals. Then Pictures>LR. But then I can't find files in LR library.Files seem stuck in Pictures as NEF and or DNG files. I know Im stuck on something dumb but I
-
[svn] 4494: Added tests to hit channels and services configuration exceptions
Revision: 4494 Author: [email protected] Date: 2009-01-12 16:12:09 -0800 (Mon, 12 Jan 2009) Log Message: Added tests to hit channels and services configuration exceptions checkintests: passed Added Paths: blazeds/trunk/qa/apps/qa-regress/testsuites/
-
Facetime icon is missing from Iphone 4 How do I retrieve it?
Good Evening, I was going to use my facetime and noticed the icon on my iphone was missing, can you please tell me how to restore it?