Usb unrecognisable message now appears when i plug my old ipod into the usb port on my v70. It used to work so i assume this is a problem caused by updating to the latest software. Has anyone been successful in downgrading to an earlier os using itunes

I now get an urecognisable usb device message when i plug my ipod classic (ipod colour?) into the usb input in my Volvo V70. The ipod used to work, but since updating the IOs it doesn't. Can anyone tell me where i can find a copy of an old ipsw which does work so that i can downgrade back and acheive compatibility again,
thanks chris jones

perhaps someone from apple tech might contribute as the software upgrade has rendered the device useless for my purposes
Chris Jones

Similar Messages

  • HT1386 Unknown error appears when I plug in my Ipod into my computer

    When I plug my Ipod into my computer I get an error message saying, "This Ipod cannot be used because the Apple Mobile Device Service is not started" what does this mean?

    This should be easy:
    How to restart the Apple Mobile Device Service (AMDS) on Windows

  • When I try to download and install the latest software version of iTunes, this message occurs:  "iTunes has an invalid signature.  The download has been removed."  Any suggestions?

    When I try to download and install the latest software version of iTunes, this message occurs:  "iTunes has an invalid signature.  The download has been removed."  Any suggestions?

    You seem to have an iTunes problem and not an iPod problem.  I suggest posting in the iTunes forum.
    How areyou doing the download?
    From Apple's site?
    Via the Apple downloader
    PC or Mac?

  • My Apple TV will not update to the latest software, dose anyone know what the problem is, I've reset, tried to do it wirelessly as well as while connected via Ethernet cable.. Both have resulted in the same message!!

    My Apple TV will not update to the latest software, dose anyone know what the problem is, I've reset, tried to do it wirelessly as well as while connected via Ethernet cable.. Both have resulted in the same message!! Update unsuccessful, current software version is 5.1 (5201) . I've rented a movie recently and does not appear in my movie list, but I have been charged for this movie, can someone help me out with these issues.

    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Source list, and then click Restore.
    If when you choose restore you get a message that the device cannot be found, download the file below
    Apple TV Software Restore 5.1.1 (2nd generation)
    Apple TV Software Restore 5.1.1 (3rd generation)
    Then hold down the option key while choosing restore and select the downloaded file when prompted.

  • Has anyone been successful in using a HP scanjet on Windows 7 Professional XP Mode?

    has anyone been successful in using a HP scanjet on Windows 7 Professional XP Mode?

    Hi there,
    Could you provide the community with a little more information to help narrow troubleshooting? Which scanjet are you using?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • ADFC-00025: The ADF controller has not been successfully initialized.

    I am using JDeveloper 11.1.2.0.0, create a simple ADF face page, which is running fine in Inetgrated Weblogic server, and package it as a War file by using Jdeveloper, I chose Weblogic 10.3 as the target server. I deployed the War file to Weblogic managed server on the Unix box by using its console. The deployment is fine and the web application is active. I get ControllerException when I run the page. Please see the exception log. I don't know what goes wrong. Thank you very much for your help.
    [ServletContext@20496013[app:TestDeployServer module:TestDeployServer.war path:/TestDeployServer spec-version:2.5]] Servlet failed with Exception oracle.adf.controller.ControllerException: ADFC-00025: The ADF controller has not been successfully initialized. at oracle.adfinternal.controller.util.Utils.createAndLogControllerException(Utils.java:212) at oracle.adfinternal.controller.application.AdfcAppInitializer.initialize(AdfcAppInitializer.java:110) at oracle.adfinternal.controller.state.AdfcContext.initialize(AdfcContext.java:93) at oracle.adfinternal.controller.state.AdfcContext.initialize(AdfcContext.java:79) at oracle.adfinternal.controller.application.WindowLifecycleLogic.windowOpened(WindowLifecycleLogic.java:60) at oracle.adfinternal.controller.application.AdfcWindowLifecycleListener.windowOpened(AdfcWindowLifecycleListener.java:61) at oracle.adfinternal.controller.application.AdfcWindowLifecycleListener.processWindowLifecylce(AdfcWindowLifecycleListener.java:42) at oracle.adfinternal.view.faces.webapp.rich.RichWindowManagerFactory$ApplicationWindowListeners.processWindowLifecylce(RichWindowManagerFactory.java:246) at oracle.adfinternal.view.faces.webapp.rich.RichWindowManager._fireWindowLifecycleEvent(RichWindowManager.java:496) at oracle.adfinternal.view.faces.webapp.rich.RichWindowManager._handleWindowOpened(RichWindowManager.java:536) at oracle.adfinternal.view.faces.webapp.rich.RichWindowManager.renderLoopbackPage(RichWindowManager.java:907) at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:109) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468) at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:293) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:199) at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256) at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    You asked this question in a wrong forum. You should have asked it in {forum:id=83} because the question is related to ADF Faces but not to WebLogic.
    ADF Faces application cannot be deployed as a WAR. You should deploy the application as EAR because ADF Faces applications need some resources which are deployed as part of EAR (e.g. some OPSS configuration filles, some ADF configuration files, JDBC DataSources, etc.).
    Dimitar

  • What can i do if my iphone nor ipad is showing up on itunes when i plug it in. i downloaded the latest version of itunes and all but still

    what can i do if my iphone nor ipad is showing up on itunes when i plug it in. i downloaded the latest version of itunes and all but still

    See http://support.apple.com/kb/TS1538 (windows) or http://support.apple.com/kb/TS1591 (mac).

  • I just reformatted my laptop (it's like new now). When I plug in my iPod/iPhone, in the Photos section, I don't have the option of choosing iPhoto to sync albums to my devices. What do I do?

    I just reformatted my laptop (it's like new now). When I plug in my iPod/iPhone, in the Photos section, I don't have the option of choosing iPhoto to sync albums to my devices. What do I do so I iPhoto becomes an option in iTunes?

    I didn't have iPhoto so I had to purchase it from the App store but that didn't help. I think the problem is because my devices still think they are synced to the previous version of my mac, but I don't know how to get them to sync with the new setup.

  • When I plug my iphone 4s into the usb in my car, text and notifications sounds are gone.

    When I plug my iphone 4s into the usb in my car, text and notifications sounds are gone.  The phone only vibrates, no sound.  The ringer works fine, and the music plays through the stereo system just fine.  When I try to turn up the volume, the ringer shows on the screen, but it will not increase in volume.  When I unplug the usb, everything works fine.  I have tried different cords and different cars, all with the same result.  This only happens in the car, when hooked up to the usb in the house or to the computer, everything works fine.  When plugged into the car, the sound disappears.  Any ideas?

    See either http://support.apple.com/kb/TS1538 (windows) or http://support.apple.com/kb/TS1591 (mac).

  • TS1372 a message comes up when i plug in my iPod shuffle (version 1.0.2) and when i click to restore and update message comes up saying iPod could not be restored unknown error occurred (1430)

    a message comes up when i plug in my iPod shuffle (version 1.0.2) and when i click to restore and update message comes up saying iPod could not be restored unknown error occurred (1430)

    The linked article
    http://support.apple.com/kb/TS1372
    has some suggestions.  Did you try doing those things?

  • I dissonected my ipod when i was uploading my ipod with the new software

    I dissonected my ipod when i was uploading my ipod with the new software 6.1 or watever and like now it has a black and white screen like a mini. i turn ut on it has the folder onit that says go to apple/ipod support thing then it shuts off. i tried restoring it and it says error. please help me cause it is really starting to make me mad.

    Try this following it exactly:
    Reset your iPod.
    1) Slide the lock button to ON.
    2) Slide the lock button to OFF.
    3) Press 'menu' and 'centre' button together for several seconds.
    4) When you see the Apple, press and hold the 'centre' and 'play/pause' buttons for several seconds.

  • When i plug my iphone 4s into the laptop itunes says itunes cannot conect this iphone because an error ocurred,(error 0xE80000222) what can i do also i havent activate my iphone so i cant do anything with the iphone either

    when i plug my iphone 4s into the laptop itunes says itunes cannot conect this iphone because an error ocurred,(error 0xE80000222) what can i do also i havent activate my iphone so i cant do anything with the iphone either
    HELPPPPPPPP ME PLEASE!!!!!

    iTunes runs on your computer, not your phone. Install the latest version of iTunes on your computer. If you're using a Mac, and running OS X 10.5, you will need to upgrade OS X first.

  • ''Well When i plug in my ipod touch the battery life is low..i let it sit a wyhle.And it starts up to the apple logo and it stay there some time then it restartsback over to the very low battery and repeat(Over&Over)?

    ''Well When i plug in my ipod touch the battery life is low..i let it sit a wyhle.And it starts up to the apple logo and it stay there some time then it restartsback over to the very low battery and repeat(Over&Over)

    Can you reset the device by holding the sleep and home button until the Apple logo comes back again?
    If this does not work, try to connect in recovery mode, explained here: iOS: Unable to restore

  • Has anyone been successful importing h.264 into Encore?

    First, my system and goal:
    A MacPro with 2.66mHz dual core and 12 gigs of RAM.
    Multi Terrabytes of space.
    I shoot on a Panasonic HVX-200, edit in Final Cut Pro and output Quicktime files as the basis for rendering to DVD and Blu-ray. I shot this stuff in 1080i. The camera codec is DVCPROHD and that is what I output to also.
    I am trying to burn Blu-ray discs. I have an external Pioneer BDR-203 Blu-ray burner and it works fine.
    I have done my tests and have decided that for Blu-ray, h.264 is far superior to mpeg2 in look and file size so I am sticking with it.
    Here is the issue (and I have scoured this forum area and found no one discussing or solving this issue to date):
    I have made hundreds of different DVDs with DVDStudioPro and am very familiar with it. Not to get off on a tangent but my beloved Apple has decided to betray me by not supporting Blu-ray (the ONLY way to output HD for us independents) so I studied up on Encore and have been using it to format my latest project to HD. The interface works pretty nice and even has some superiority to DVDSP but you have to have the patience of JOB to see your results. 5 Day (Remember. That's 24 Hour Days) Rendering is my tops so far. (OK. Full Disclosure... the documentary is 3 hours and 15 minutes long BUT DVDStudioPro took the same Quicktime files and crunched them down to mpeg2 for the DVD in about a day) Anyway about 6 days ago I had a 3 day render session that crapped out on me as it was finally recording to disc. For some reason it didn't like the BD-RE disc I had in the machine and just bagged the whole process. When I put in a new disc it just started rendering All Over Again. After that debacle I gave up on that method and now am rendering to BDMV folders which I then burn to disc using Toast. (While I am writing this my fingers are crossed that it will make it to the end - it's been another 3 days...)
    I provide the details above to show why I am more than dismayed that I cannot figure any way to import h.264 files INTO Encore from another renderer. Either Compressor or Encoder render much faster than Encore. So I have tried render my project to a variety of output types from both Apple's Compressor and Adobe's Encoder with no joy any way I try.
    (as a side note I am also dismayed that when I made a change to a MENU, Encore decided to encode The Whole Project Again rather than just the menu part...)
    One of my latest file testing adventures was based on a theory that the problem has to do with DVCPROHD recording to 1280 x 1080 anamorphic rather than 1440 x 1080 (the "expected" frame size for 1080i). I fooled with that a half day but could not get either renderer to generate any test material from my FCP output that Encore would burn without re-rendering. By that I mean I cajoled and tricked Compressor and Encoder to output 1920 x 1080 files; 1440 x 1080 files and 1280 x 1080 files (all h.264) to see if Encore would recognize any of them without re-rendering them. No Luck.
    So. Has anyone had success importing h.264 into CS4Encore from anywhere (but particularly using the same or similar gear I am using)? The Encore literature really doesn't give you much to go oon.
    Lately I am very inclined to think the problem has something to do with this 1280 x 1080 DVCPROHD issue but I can't say for sure. I offer that as a suggestion if anyone else with a similar production stream is having the same problem and maybe it will trip a switch in their mind for a solution.
    I like the Encore interface and design possibilities you have by swinging back and forth from PShop and After Effects but using Encore's renderer is like Chinese Water Torture.
    Thanks for your help.

    Brian,
    I got your test file into Encore and got Encore to show its Blu-ray transcode status as "Don't Transcode".
    Screenshots:
    PrCS4 Export settings:
    EnCS4 Project Panel:
    Since it's hard to make out the En Project panel, I'll attach the same image to another message.
    -Jeff

  • When I plug my macbook retina into the tv with the hdmi port, all I see is a black screen with a white mouse How do I fix this?

    Recently I bought my macbook with retina display and when I plugged it into the television with using the HDMi cord it worked perfectly fine with the image on the television. But now I when I plug it in to the television it comes up with a black screen and a white mouse. Before this incident I was mucking up with the setting of the mac book and I dont know what I did wrong. Can someone tell me how to fix this ?

    Howdy Lumagofe,
    I was thinking that you may need to reset the iPod Nano, outlined here How to reset iPod http://support.apple.com/kb/ht1320.
    Press and hold the Sleep/Wake button and Volume Down button simultaneously for at least eight seconds or until the Apple logo appears. You may need to repeat this step.
    If the above step did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep. Try resetting the iPod while it is connected to power.
    If that doesn't quite get the iPod going again, then it will need to be restored. Use this article to help with that Restoring iPod to factory settings http://support.apple.com/kb/ht1339.
    All the very best,
    Sterling

Maybe you are looking for