Use 9239 simultaneously in two application

I am using only one channel 9239 ( 4 Channel Analog input) in my app, I want to use another channel of same module in another application simultaneously,is this possible ? To initialize DAQ(NI cDAQ - 9172) and 9239 same time in two application
I am using labview 8.5, app is calling a DAQTASK

No you can't You can only have one task running that uses the same hardware resource. Create a single app that reads both channels.

Similar Messages

Two applications wants to read on the same port using Socket

I have an application running on one machine using TCP/IP socket. The data transfer with the other application on other machine is in ASCII.
Now I want a new application that can have a copy of data received and sent on the given port, where the previous application is running.
Is it possible in Java using socket and TCP/IP to have two application reading data from the same port and both can read all the data.

Even when you don't state the type of app which need to read the data stream (is it a server or a client app???), it's impossible to share a single TCP/IP socket among multiple apps.
Perhaps the best thing to do is to develop something like a proxy server who listens on the nominated port and provides to contact (if your apps are server ones) or to be contacted (if your apps are client ones) by the desired apps.
This way, the only job for the proxy is to duplicate the contents of the data stream and make them available to all the apps engaged.
Hope this helps.

TLS cipher suites: Is there any Windows application that is using one of the two NULL cipher suites?

My question is about these two standard cipher suites from Windows 7/8 (and Windows Servers):
TLS_RSA_WITH_NULL_SHA256
TLS_RSA_WITH_NULL_SHA
Question: Is there any native Windows 7 application/process that must use one of these two ciphers?
If not, I would simply kick them out to make sure that they are never used.
Bonus question: Is there any reason to keep these on any Windows Server?

Thank you for your response. I kicked out the NULL ciphers and everything weaker than 3DES. Consequently I also deactivated SSLv3 on five windows clients (computers and not servers, no server admin here). Rearranged the order of preference according to
my needs. So far I don't experience any issues. Did the same with JRE many years ago (just kicked it out), now I lean back and enjoy the show.

How to create a script logic using two applications and some conditions?

Hi All,
I am using BPC 7.0 MS
I have two applications, one called RATE (Dimensions: Category, InputCurrency, Rate, RateEntity, Time) and one called GYP (Dimensions: Category, Entity, PL, Producto, RptCurrency, Time. In the GYP application for Revenues. I have the followings products:
Product code
1-808-912-433
3-208-345-542
11-869-789-946
13-456-786-890
I need to calculate a discount using the first digits to identify the product: 1, 3, 11 and 13, based on some percentages that are in the RATE application.
I have an element in the RATE application for each one of them.
DPC1
DPC3
DPC11
DPC13
What I am trying to do in the script logic is:
*XDIM_MEMBERSET PL=Revenues
*XDIM_MEMBERSET PRODUCTO=<ALL>
*XDIM_MEMBERSET ENTITY=<ALL>
*XDIM_MEMBERSET CATEGORY=Budget
*LOOKUP RATE
*DIM D1:RATE ="DPC1"
*DIM D11:RATE ="DPC11"
*DIM D3:RATE ="DPC3"
*DIM D13:RATE ="DPC13"
*DIM RATEENTITY="Global"
*DIM INPUTCURRENCY="VEB"
*ENDLOOKUP
*WHEN PL
*IS Revenues
*REC(FACTOR=LOOKUP(D1), PL=Discount)
*ENDWHEN
*COMMIT
In the WHEN area, i would like to create some condition to identify the product and assign the correct percentage to it but i don't know how to do it?
Do you have any suggestions?
Also, because i need to key the values in the RATE application for the discounts, the logic should be run from this application?
Using RUNLOGIC like this:
*RUNLOGIC
*APP GYP
*LOGIC Discounts
*ENDRUNLOGIC
Best regards,
Luisana

Hi Nilanjan,
Thanks for your prompt reply.
The special characters ("-") cannot be used. The product codes use the special character ("_").
I understand what you said about the property for the dimension Product but not for the dimension Rate. I have the lookup that has the four elements (DPC1, DPC11, DPC3, DPC13). It is not supposed to get the data from those elements directly when using the lookup?
The script logic is still not working. I created the dimension property in the product dimension and the new script logic is as follows:
*XDIM_MEMBERSET PL=Revenues
*XDIM_MEMBERSET PRODUCT=<ALL>
*XDIM_MEMBERSET ENTITY=<ALL>
*XDIM_MEMBERSET CATEGORY=Budget
*LOOKUP RATE
*DIM D1:RATE ="DPC1"
*DIM D11:RATE ="DPC11"
*DIM D3:RATE ="DPC3"
*DIM D13:RATE ="DPC13"
*DIM RATEENTITY="Global"
*DIM INPUTCURRENCY="VEB"
*ENDLOOKUP
*WHEN PRODUCT.TYPE
     *IS 1
          *REC(FACTOR=LOOKUP(D1), PL=Discount)
     *IS 11
          *REC(FACTOR=LOOKUP(D11), PL=Discount)
     *IS 3
          *REC(FACTOR=LOOKUP(D3), PL=Discount)
     *IS 13
          *REC(FACTOR=LOOKUP(D13), PL=Discount)
*ENDWHEN
*COMMIT
Could you let me know what i am doing wrong?
The calculation i would like to get is: Discount = Revenues(GYP) X DPCx(RATE)
Also, when I sent the data from the rate application I get the message "ExecuteBaseLogic::invalid application:*APP GYP". I am using a RUNLOGIC in the application RATE with the following code:
*RUNLOGIC
*APP GYP
*LOGIC Decto_en_vtas_pilot
*ENDRUNLOGIC
Kind Regards,
Luisana

How to exchange a java object between two applications using web service?

Hi,
I am working with Eclipse 3.2 and the application server is weblogic 10.
I have two applications, each one works in an instance of the server.
The first application contains a method called "send " which return a java object.
The second one contains a method called "receive" which must receive this object.
The two applications must exchange the object using web service,
Can you help me please?
Thanks.

Have you defined your service class/methods accepting, or returning, the appropriate objects? If so, does the generated WSDL appear to be correct? I have just completed a web service project and found that passing specific objects to be simple, however, I was passing objects which were simply container objects with bean characteristics. Also, might I suggest that you have a play with netbeans. I found that IDE to be great for creating and consuming web services!

One iPlanet using two application servers?

Can anyone help, is it possible for one iplanet 6.0 instance using/connecting two application servers (i.e. one is JRun server, another is Webspere server) at the same time?
If so, how to do it?

I don't see why not. I have had the same webserver talking to both iplanet 6.5 and sunOne 7. As both the application servers will connect vias a plugin I would suggest you follow the instructions for both application servers and see what happens.

Open two GUI( JFrame) simultaneously for one application

Can we open two GUI( JFrame) simultaneously for one application at tha same time.if yes why ?and if no why?

OK, its really simple, basically, you need a desktop frame to stor all the other frames and then you just pop them in, from a new class each time.
Here's the code from the demo I learnt it from:
(The demo itself)
import javax.swing.JInternalFrame;
import javax.swing.JDesktopPane;
import javax.swing.JMenu;
import javax.swing.JMenuItem;
import javax.swing.JMenuBar;
import javax.swing.JFrame;
import javax.swing.KeyStroke;
import java.awt.event.*;
import java.awt.*;
* InternalFrameDemo.java requires:
* MyInternalFrame.java
public class InternalFrameDemo extends JFrame
implements ActionListener {
JDesktopPane desktop;
public InternalFrameDemo() {
super("InternalFrameDemo");
//Make the big window be indented 50 pixels from each edge
//of the screen.
int inset = 50;
Dimension screenSize = Toolkit.getDefaultToolkit().getScreenSize();
setBounds(inset, inset,
screenSize.width - inset*2,
screenSize.height - inset*2);
//Set up the GUI.
desktop = new JDesktopPane(); //a specialized layered pane
createFrame(); //create first "window"
setContentPane(desktop);
setJMenuBar(createMenuBar());
//Make dragging a little faster but perhaps uglier.
desktop.setDragMode(JDesktopPane.OUTLINE_DRAG_MODE);
protected JMenuBar createMenuBar() {
JMenuBar menuBar = new JMenuBar();
//Set up the lone menu.
JMenu menu = new JMenu("File");
menu.setMnemonic(KeyEvent.VK_D);
menuBar.add(menu);
//Set up the first menu item.
JMenuItem menuItem = new JMenuItem("New");
menuItem.setMnemonic(KeyEvent.VK_N);
menuItem.setAccelerator(KeyStroke.getKeyStroke(
KeyEvent.VK_N, ActionEvent.ALT_MASK));
menuItem.setActionCommand("New");
menuItem.addActionListener(this);
menu.add(menuItem);
//Set up the second menu item.
menuItem = new JMenuItem("Quit");
menuItem.setMnemonic(KeyEvent.VK_Q);
menuItem.setAccelerator(KeyStroke.getKeyStroke(
KeyEvent.VK_Q, ActionEvent.ALT_MASK));
menuItem.setActionCommand("Quit");
menuItem.addActionListener(this);
menu.add(menuItem);
return menuBar;
//React to menu selections.
public void actionPerformed(ActionEvent e) {
if ("New".equals(e.getActionCommand())) { //new
createFrame();
} else { //quit
quit();
//Create a new internal frame.
protected void createFrame() {
MyInternalFrame frame = new MyInternalFrame();
frame.setVisible(true); //necessary as of 1.3
desktop.add(frame);
try {
frame.setSelected(true);
} catch (java.beans.PropertyVetoException e) {}
//Quit the application.
protected void quit() {
System.exit(0);
* Create the GUI and show it. For thread safety,
* this method should be invoked from the
* event-dispatching thread.
private static void createAndShowGUI() {
//Make sure we have nice window decorations.
JFrame.setDefaultLookAndFeelDecorated(true);
//Create and set up the window.
InternalFrameDemo frame = new InternalFrameDemo();
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
//Display the window.
frame.setVisible(true);
public static void main(String[] args) {
//Schedule a job for the event-dispatching thread:
//creating and showing this application's GUI.
javax.swing.SwingUtilities.invokeLater(new Runnable() {
public void run() {
createAndShowGUI();
Myinternalframe.java:
import javax.swing.JInternalFrame;
import java.awt.event.*;
import java.awt.*;
public class MyInternalFrame extends JInternalFrame {
static int openFrameCount = 0;
static final int xOffset = 30, yOffset = 30;
public MyInternalFrame() {
super("Document #" + (++openFrameCount),
true, //resizable
true, //closable
true, //maximizable
true);//iconifiable
//...Create the GUI and put it in the window...
//...Then set the window size or call pack...
setSize(300,300);
//Set the window's location.
setLocation(xOffset*openFrameCount, yOffset*openFrameCount);
You should be able to tell from that

Using SSO for 2 partner application that different domainname

Dear expert,
I have to implement the Oracle SSO with 2 existing Web Application that separate domainname (eg. domainA.com and domainB.com). I have read from OTN the SSO using HTTP Cookie for partner applications but the standard cookie can not be accessed from different domainname.
Please, Who can help me on this case?
Thanks in advance,
Kotaro

Reading and googling through much unclear RMAN content I came to the conclusion that it simply is not possible to use RMAN to copy SCHEMA_A from INSTANCE_A in MACHINE_A into INSTANCE_B without blowing away SCHEMA_B in INSTANCE_B on MACHINE_B.
So, I need to use RMAN to set up INSTANCE_A_COPY on MACHINE_B. Then I can have both INSTANCE_B and INSTANCE_A_COPY on MACHINE_B. If MACHINE_A should fail then I can switch over to MACHINE_A_COPY and run both instances, no problem.
Question: I would like to save time and disk space by not copying a 1TB reference tablespace/schema into INSTANCE_A_COPY. When I run INSTANCE_A_COPY it will need to join to the read-only reference tablespace/schema in INSTANCE_B. What will be the performance of a “distributed join” on tables across two instances in the same machine?

TS2972 is it possible to use home sharing between two users on the same computer?

My wife and I have itunes accounts and want to be able to share music we have each bought on our accounts. We have tried setting up the home sharing on our PC but it doesn't show up on the screen. Can anyone please help?

"Is it possible to use home sharing between two users on the same computer?"
No. Home sharing is used to connect two running instances of iTunes across a network. When you switch users on the computer all applications running on the other profile are suspended.
You can however share your respective media folders so that they are visible in either profile and then copy over any content that you want, or you could create a single joint library which you use when either user is logged in.
tt2

Using Configurator to share two iPads with multiple users

I work in an office where several people want to share two iPads. We require individuals to connect to our secure wireless network with their own username and password. Each user also wants to set up the iPad to connect to their own Exchange account. Each person will also use their own Apple iTunes store ID and download their own apps.
If I understand the differences between the two applications, Apple Configurator would be the appropriate tool to manage this and not the iPhone Configuration Utility. If I understand how Configurator works, I set up the iPad to connect to Jane's email and to connect to the Apple Store and our wireless using Jane's credentials. Then I back up that profile using Configurator. Next I configure the same device to connect to Jim's email and to connect to the Apple Store and our wireless using Jim's credentials. Then Jim backs up the device to his profile using Configurator.
Now whenever Jane uses the iPad, she brings it back and plugs it into our Mac to backup her profile changes (her apps, her home wireless network settings, etc.). Jim sits down and "Checks out" the iPad to himself which loads his previously backed up profile. If Jane still has the laptop checked out, Jim can plug in the second iPad and load his profile.
Is this how it works? It seems like Configurator can do this, but not the Configuration Utility (which means you need a Mac running Lion to use Configurator).
Thank you,
Sean

Thanks gyrhead. Those are some of the better articles I've seen on using Configurator. One of our computer lab managers has been playing with it (I work in the IT department for a university). Basically I can see us using it to manage iOS devices we provide for use in the labs or on a short-term checkout basis, but I don't see Configurator as being a solution for the departments we support who want to share iPads between users. Even if a department has a Mac that can run configurator (many do not), I think it will lead to some bigger support and training issues that we do not have the resources to manage.
For now we are going to tell our faculty and staff departments that iPads and other iOS devices are meant to be personal devices and are not meant to be easily shared. Until Apple comes up with an easy way to login to different profiles on the device (I have also seen some third party products in development... like this one: http://nowsci.com/userprofiles/) we are going to recommend that departments purchase an iPad for any staff who needs it. If they really want to share one iPad among multiple users, they can set up a single Apple/iTunes account for the device tied to a purchasing card, and then just use Safari for checking email (instead of configuring everything for individuals). Of course if they really want to it is not a big deal to delete your email/calendar settings and then add them each time you use the device, but if it wasn't my own device I would just use Safari to check my email and calendar over the Web.
Sean

I've lost two application windows -- how do I get them back?

I can't access two application windows -- Mail and Spotlight. I sometimes use a external monitor so this may be related to that.
When I switch to Mail, the Mail menu appears on top, but I do not see the window with my mailboxes in it. When I use Expose to see all the open windows, there's my Mail window, in light purple. I click on it, to select it, and the window zoooms away to the left, never to be seen again. The top menu indicates that I'm in Mail.
The same thing happens to me with Spotlight. I can search in Spotlight, but the results are in an inaccessible window that zooms away when I try to select it in Expose.
Plugging in an external monitor again does not retrieve the window, regardless of whether I mirror the displays or not. After searching these forums, I tried changing the screen resolution to 640x480 instead of 1024x768 but that didn't help. I looked in Library/Preferences to see if I could trash some preferences, but neither application seems to have any, that I know how to identify.
Any help would be greatly appreciated.

Just in case this comes up for anyone else... I got the windows BACK by hooking my computer up to the external monitor, and REVERSING the arrangement of the monitors (so the one that was on the left was on the right, and vice versa). This placed the window in my field of view and I was able to retrieve it.

How can we launch the labview screen beyond other screens while running two applications on a same time

Hi all,
I need to run two applications in my system at same time. one of the application is labview. it is running in backside. the dialog boxes which i created in labveiew need to display in fron of all applications.... what should i do to do that.....any suggestions...
thanks in advance
Regards,
Ragu

The easiest thing to do (but can be bad) is to make the LabVIEW window modal. This will make it the front most window at all times, until the program stops executing. As you can imagine if you don't have a way to close the window then you will be forced to kill LabVIEW through the taskmanager.
To make window modal go to VI Properties (by right clicking the VI's icon) go to Window Appearance, click Customize, then under Window Behavior select Modal.
The other more complicated solution is to use Dll calls to bring the window to the front.
Message Edited by Hooovahh on 07-02-2009 08:44 AM
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

How can one use Mission Control with two monitors? Please bring Spaces back

How can one use Mission Control with two monitors. With Spaces I could treat each space as a single desktop.
SyBB

I use two monitors at work and have no issue. I have my mail set to use Desktop 1 and iTunes set to the second monitor of Desktop 1. I have browsers set to Desktop 2 and Fusion and RDC set to Desktop 3.
Two things that may help you. In System Preferences > Mission Control, disable the setting "Automatically rearrange spaces...". This screwed with assigning applications to certain spaces. And the other thing is don't use full screen on apps that support it. This just makes your second monitor superfluous.

Splitting Emergency Address and Family Details into two application

Hi All,
I need a help to figure out how it can be achieved. We are having Ess_family_US application which will allow us to enter the details for all the subtypes we have entered in the backend Table. Now my client is asking to Split the application into two applications as:
1. Emergency Contact
2. Family details.
As they want these applications to be placed in different sections of ESS Overview Screen. More Specificly if i enter Emergency Details it should display and provide editing provision only for Emergency Contacts. In the same way for Family Details also.
Can any one guide me on this how we can approach and resolve it.
Thanks
Ravi Sunkara

Hi,
It can be possible thru Dynamic XSS Homepages with Static Services
for this you need to create the Dynamic XSS homepage ....
Following is the best document for this
Create Dynamic XSS Homepages with Static Services Using a Simple Proxy Class
/people/amir.madani/blog/2007/01/05/create-dynamic-xss-homepages-with-static-services-using-a-simple-proxy-class

How to integrate two applications in wda.

Hi experts ,
I have two applications in WDA .
I would like to integrate these two applications in the third one.
And wants to run third application so that i can see first and second applications view. How can I achieve it.
Thanks .

You can easily embedded one Web Dynpro component within another. This is exactly what you are doing when you use ALV. You can do the same thing with your components. I suggest that you start be reading the help section on cross component usage:
[http://help.sap.com/saphelp_nw70/helpdata/EN/a7/1d8b412bb5b35fe10000000a1550b0/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/EN/a7/1d8b412bb5b35fe10000000a1550b0/frameset.htm]
At the risk of a little self promotion, the topic of component reuse and embedding is a central topic of the Web Dynpro ABAP sections of the SAP Press Book - Next Generation ABAP Development.

Use 9239 simultaneously in two application

Similar Messages

Maybe you are looking for