Use checkbox to select rows in a af:table

How to use a checkbox on the first column of a table as row selection control?
Just like most of the web email client (Yahoo, Hotmail...).
I am using JDeveloper 11.1.1.2 with Fusion Web Application - ADF.
The control I am using is a <af:table>.
Thanks,
Samson Fu

The sample you provide is very usefull. But it has some limitations to my working application. It dose not work for tables in clickToEdit mode. User has to click a row in the table to enable the selection checkbox, and the tick the checkbox again to have the row to be selected, if the table is in clickToEdit mode.
Anyway, that is really a good example. Thank you!
Regards,
Samson Fu

Similar Messages

  • Use checkbox to select rows in a table

    Is it possible to use a checkbox on the first column of a table as row selection control? Just like most of the web email client (Yahoo, Hotmail...).
    Thanks,
    Samson Fu

    I am using JDeveloper 11.1.1.2 <af:table>.
    Regards,
    Samson Fu

  • How to get selected row values in a table using check box

    Hi ADF Experts,
    JDEV Version 11.1.1.7.0
    My requirement is getting the selected row valuesof a af:table using a checkbox(multi select).
    Thanks,
    Animesh

    Hi,
    add a transient attribute to the POJO entity and update this through a check box. The ensure you have autosubmit=true set on the check box. In a value change listener set or remove the row's checbox attribute value
    Frank

  • Using checkbox at selection screen

    I used checkbox at selection screen and i want output as per selected checkbox. How to do that??

    hiii
    use following code
    AT SELECTION-SCREEN.
      IF p_char EQ 'X'.
        w_check = 'X'.
        WRITE: w_check.
      ELSE.
        w_check = ' '.
        WRITE: w_check.
      ENDIF.
    SELECT b~carrid                      "Carrier Id
             b~connid                      "Connection id
             b~fldate                      "Flight date
             b~price                       "Price
             b~currency                    "Currency
             b~seatsmax                    "Maximum Seats
    INTO TABLE t_flight
    FROM spfli AS a
           INNER JOIN sflight AS b ON a~carrid = b~carrid
          INNER JOIN sbook AS c ON c~carrid = b~carrid AND
                                           c~connid = b~connid AND
                                           c~fldate = b~fldate
              WHERE b~carrid IN s_carrid AND
                              c~cancelled EQ w_check.
    regards
    twinkal

  • How to get selected  row index  of a Table ?

    hi gurus,I'm new  to Webdynpro for abap
    I'm displaying    just Flight details in a Table  so
    how to get selected  row index  of a  Table  and need  to be display in Message manager.

    Hi,
    For getting the row index use the following code.
    DATA lo_nd_node TYPE REF TO if_wd_context_node.
      DATA lo_el_node TYPE REF TO if_wd_context_element.
      DATA index TYPE i.
    * navigate from <CONTEXT> to <NODE> via lead selection
      lo_nd_node = wd_context->get_child_node( name = wd_this->wdctx_node ).
      lo_el_node = lo_nd_node->get_lead_selection(  ).
      index = lo_el_node->get_index( ).
    node is the name of the node which is binded to the table.
    For printing the message u can use code wizard.
    Press ctrl-F7. Now Select generate message.
    IN this select the method  REPORT_SUCCESS
    In the code now u can give index to Message text Exporting parameter. Comment receiving parameter.
    Write the whole code in onLeadSelect of the table.
    Regards,
    Pankaj Aggarwal

  • How to get the selected rows & columns in the table?

    hi everybody,
                         In my application the table is kept inside the event structure.I select the cells  in the table (using mouse) on running time.How to get the selected number of rows & columns in that table?

    Hello,
    You can fill selected values of the table by writing to it or the corresponding property using a property node - the table is just a 2D array of strings.  I think for your "disable" question you are referring to the shortcut menu (when you right click).  If you are using LabVIEW 8.x, you can edit or disable that shortcut menu - just right click on your table at edit time and choose Advanced >> Run-Time Shortcut Menu.
    Best Regards,
    JLS
    Best,
    JLS
    Sixclear

  • How to get selected Row Index in a table based ona  VO?

    Hi All,
    I'm writing an ADF form wherein I use a VO based on a SQL query. I'd like to know how to get the index of a selected row. I havea selection Listener in place where I can print the selected Row's data using getSelectedRowData().toString() on the table.
    How can I get certain Attributes from this selected row.
    One solution I thought of is to get the row index and then read attributes. But I cant seem to figure out how to get rowIndex for a selected row. Any sugestions?
    Using JDeveloper 11g.
    Thanks
    P.

    If your selected row is marked as current row you can use
    // Get a attribute value of the current row of iterator
    DCIteratorBinding iterBind= (DCIteratorBinding)dcBindings.get("testIterator");
    String attribute = (String)iterBind.getCurrentRow().getAttribute("field1");Where 'testIterator' is the name of the iterator you use for the table and 'field1' is the name of an attribute you want to get.
    Or you can iterate over the selected row keys (even if it's only one):
    // get  selected Rows of a table 2
    for (Object facesRowKey : table.getSelectedRowKeys()) {
    table.setRowKey(facesRowKey);
    Object o = table.getRowData();
    JUCtrlHierNodeBinding rowData = (JUCtrlHierNodeBinding)o;
    Row row = rowData.getRow();
    TestRow testRow = (TestRow)((DCDataRow)row).getDataProvider() ;
    }Where TestRow is the row type of the VO of your table.
    Timo

  • How do I select rows from the same table that have multiple occurances

    Hi Everybody,
    I am trying to select records from a detail table by grouping it. The table has more than 1 million records and the query is not performing well. The basic question is how to select a distinct record from a table which matches all values in one column and any in the other.
    desc SCV
    ID NUMBER PK (ID + SCRID)
    SCRID NUMBER FK(SC)
    ID SCRID
    1 1
    2 1
    3 1
    4 2
    5 2
    6 3
    7 4
    8 4
    desc PROJECTS
    ID NUMBER PK
    NAME VARCHAR2(100)
    ID NAME
    1 PROJECT1
    2 PROJECT2
    3 PROJECT3
    4 PROJECT4
    desc PJS
    ID NUMBER
    PROID NUMBER FK (PROJECTS)
    SCRID NUMBER FK (SCV(SCRID + SCVID)
    SCVID NUMBER
    ID PROID SCRID SCVID
    1 1 1 1
    2 1 1 2
    3 1 2 5
    4 1 3 6
    5 1 4 7
    6 2 1 3
    7 2 2 4
    8 2 2 5
    9 2 4 7
    There are over 1 million records in PJS.
    desc TBP
    SCRID NUMBER
    SCVID NUMBER
    SCRID SCVID
    1 1
    1 2
    1 3
    2 4
    2 5
    3 6
    4 7
    4 8
    The requirement is to select projects that have matching SCRID, SCVID from TBP such that
    all distinct SCRID should match and within that and any SCVID match will do. (A "AND" between each SCRID and an "OR" for each SCVID in that SCRID like 'SCRID = 1 AND (SCVID = 1 OR SCVID = 2 OR SCVID = 3) AND SCRID = 2 AND (SCVID =....)
    So, for the sample data it should return us PROID = 1
    I have few queries written for this:
    SELECT PROID FROM PJS,TBP WHERE TBP.SCVID = PJS.SCVID AND TBP.SCRID = 1
    INTERSECT
    SELECT PROID FROM PJS,TBP WHERE TBP.SCVID = PJS.SCVID AND TBP.SCRID = 2
    INTERSECT
    SELECT PROID FROM PJS,TBP WHERE TBP.SCVID = PJS.SCVID AND TBP.SCRID = 3
    INTERSECT
    SELECT PROID FROM PJS,TBP WHERE TBP.SCVID = PJS.SCVID AND TBP.SCRID = 4
    This query performs well but the cost is very high, hardcoding, sorting.
    The 2nd option is to:
    SELECT pjs.PROID proid
    FROM TBP tbp,
    PJS pjs
    WHERE pjs.SCVID = tbp.SCVID
    AND pjs.SCRID = tbp.SCRID
    GROUP BY pjs.PROID
    HAVING COUNT(DISTINCT pjs.SCRID) = (SELECT COUNT(DISTINCT SCRID ) FROM TBP)
    This has a low cost but runs slowly.
    One more way I tried was with the IN operator like
    SELECT DISTINCT PROID FROM PJS A,TBP T WHERE T.SCRID = 1 AND T.SCVID = A.SCVID
    AND PROID IN (SELECT PROID FROM PJS A,TBP T WHERE T.SCRID = 2 AND T.SCVID = A.SCVID
    AND PROID IN (...SO ON with each DISTINCT SCRID.
    Again this involves too much of sorting.
    Any help will be appriciated.
    Thanks in advance.

    Hi Andrew,
    Use DELETE t_itab statement inside the loop.
    I have modified your code. It is perfectly working.See bellow  -
    LOOP AT it_zmember01 INTO wa_zmember01.
    WRITE: / wa_zmember01-mnumber UNDER 'NUMBER',
    wa_zmember01-mname UNDER 'NAME',
    wa_zmember01-mdob UNDER 'DOB'.
    WRITE / '-----------------------------------------------------------------'.
    DELETE it_zmember01.               " Modified
    ENDLOOP.
    DELETE it_zmember01. statement inside the loop will delete the current row of the table.
    Regards
    Pinaki

  • How to select rows in adf faces table

    Hi guys
    im new to adf faces .I created a adf faces table with some data.My task is to select one row and if i click tht row, the data of tht row will be displayed in an input text fileds.How can i select a row in a adf faces table and give actions to rows...i read so many tutorials...none of them didnt give a correct idea....plz help me...
    thanks in advance..
    rajiv

    You're here in the Sun JSF forum, not in the Oracle JSF forum.
    Try here: JDeveloper and ADF
    If the ADF datatable is technically comparable with the RI datatable, check http://balusc.xs4all.nl/srv/dev-jep-dat.html to get some insights how to retrieve the selected row object.

  • How to read the selected row value of a table node

    hi
    i have a node of table type, displaying few records & with each record a  NEXT button is there.
    now i want to read the values of the selected row of the table & want to process next with NEXT button.
    pls tell me how to read the values of the selected row only.
    reds.

    data : lo_nd type ref to if_wd_context_node,
      lo_nd1 type ref to if_wd_context_node,
      lt_temp type wdr_context_element_set,
      wa_temp type ref to if_wd_context_element,
      ls_node1 type sflight,
      lt_node1 type STANDARD TABLE OF sflight.
    lo_nd = wd_context->get_child_node('CN_MAIN').
      CALL METHOD lo_nd->get_selected_elements
       RECEIVING
           set = lt_temp.
      loop at lt_temp INTO wa_temp.
          CALL METHOD wa_temp->get_static_attributes
          IMPORTING
            static_attributes = ls_node1.
        APPEND ls_node1 TO lt_node1.
        CLEAR ls_node1.
      ENDLOOP.
    'CN_MAIN' is the node whose selected values are to be picked and stored in internal table lt_node1.
    Other option by Thomas :
    DATA lo_nd_cn_main TYPE REF TO if_wd_context_node.
      DATA lt_temp TYPE wdr_context_element_set.
      FIELD-SYMBOLS <wa_temp> LIKE LINE OF lt_temp.
      DATA lt_node1 TYPE wd_this->elements_cn_main.
      FIELD-SYMBOLS <ls_node1> LIKE LINE OF lt_node1.
      lo_nd_cn_main = wd_context->get_child_node( name = wd_this->wdctx_cn_main ).
      lt_temp = lo_nd_cn_main->get_selected_elements( ).
      LOOP AT lt_temp ASSIGNING <wa_temp>.
        APPEND INITIAL LINE TO lt_node1 ASSIGNING <ls_node1>.
        <wa_temp>->get_static_attributes( IMPORTING STATIC_ATTRIBUTES = <ls_node1> ).
      ENDLOOP.

  • Using checkboxes to select items in a Spark DataGroup/List?

    I have a DataGroup from Catalyst, laid out like a tile list:
    I'd like to do something a bit different, in that I'd like to allow people to multi-select items in the list using those checkboxes instead of the usual command/control-click.
    The checkbox, label and image are in the itemRenderer.  Is there an easy way that I can have that checkbox toggle the selected state of its list item?

    Hi,
    Using the checkbox as a selection is easy enough as all you have to do is add a change event to the checkbox in the renderer and then in the event
    selected=mycheckbox.selected;
    The fun is how to handle the list click event from the checkbox you can stop propagation but if the item is clicked it will reset the selected indices.
    There is a few ways to handle this
    when processing the list don't use the selected indices just use the checkbox value to determine whats selected
    disable the listbox click event so items have to be selected with the checkbox
    or the most complex lots of overriding so that click acts like a ctrl/click and the checkbox/itemclick can toggle each other.
    David

  • How to select rows or columns of tables without using the mouse?

    2nd post ever! Yeah! \m/
    In Excel, I can select entire rows or columns of data WITHIN TABLES--i.e., not selecting entire sheet rows or columns--by going to any cell on the perimeter of the table, holding down shift+ctrl, and clicking a direction arrow. So for example, if I have a table in columns D-G and rows 1-5, I can highlight row 4 by going to the first or last cell of that row, holding down the shift+ctrl, and hitting the appropriate direction arrow. You might think this is superfluous given that you can use the mouse to select cells. But that becomes cumbersome with large tables, and this method can be more efficient even with small tables.
    Similarly, it's often useful to navigate tables, particularly large ones, by moving from any cell within the table to the end or beginning of that row or column by holding down ctrl and hitting the appropriate arrow key. In Excel, this ctrl+arrow key method also allows you to skip blank cells, which is another very useful navigational feature.
    I tried numerous combos involving shift, ctrl, command, alt/option and the arrow keys. Haven't found a way to do any of this yet.
    Anyone?

    Hi Josh,
    Numbers is organized differently than Excel, and the navigation tools are different too. Many of us miss our particular favorites from spreadsheets past, but this is Numbers, not a clone. The biggest adjustment is to go from huge monolithic sheet-tables containing virtual sub-tables to a simple blank sheet with small tables, sometimes many per sheet. Navigating is no big deal in these small tables and neither is getting from one small table to another, using the Sheets pane.
    Selecting a particular Table is as easy as clicking on the table's name in the Sheets pane. Selecting a particular row, or column, or ranges of rows or columns is done by clicking on the table's row and column labels, left side and top side once a cell is selected in the table.
    Numbers is weak at handling large Tables and documents that are large overall. We know this and many of us still prefer it to the alternative when the tool fits the task.
    Jerry

  • Selectall checkbox not selecting rows in  all pages

    Hi guys,
    Please help
    what is the best way to select all the pages when i click on select all checkbox in the first page. Currently my code is selecting only 1st page of rows.
    Please help me.
    I have region with sql query(pl/sql function body returning sql query) with the following code. Repot is conditional.
    DECLARE
        l_query          VARCHAR2(32676);
    BEGIN
        l_query := q'!  SELECT DISTINCT 
                                apex_item.checkbox( 1
                                                  ,wo.wip_entity_id
                                                  ,'onchange="javascript:CheckedAll(); setChkboxVal(this);"'
                                                  ,:P0_CHK_LIST
                                                ) AS selecter
                                    -- ,wo.work_order_status AS Status
                                               ,NVL((select DISTINCT STATUS from xxdl.xxdl_eam_its_pta_rollover WHERE wip_entity_id = wo.wip_entity_id),'') AS Status
                                     ,wo.wip_entity_name AS "Work Order Number"
                                     ,msn.asset_group_description AS "Asset Group"
                                     ,wo.asset_number AS "Asset Number"
                                     ,cust_prof.name As "Profile Class"
                                     ,wo.wip_entity_id As "wip_entity_id"
                                                       ,wo.asset_group_id
                                     ,budget_department.project_id
                                     ,budget_department.project_number
                                     ,budget_department.task_id
                                     ,budget_department.task_number
                                     ,budget_department.award_id
                                     ,budget_department.award_number
                            FROM xxdl.xxdl_eam_wo_txn_accounts txn_acct
                                                    ,apps.eam_work_orders_v wo
                                  ,apps.mtl_eam_asset_numbers_v msn
                                  ,apps.hz_cust_profile_classes cust_prof
                                  ,(SELECT tasks.task_id
                                            ,tasks.project_id
                                            ,valid_pta.award_id
                                            ,valid_pta.award_number
                                            ,(SELECT DISTINCT project_number
                                              FROM xxdl.xxdl_valid_pta_combinations
                                              WHERE project_id = tasks.project_id
                                              ) project_number
                                            ,tasks.task_number
                                            ,tasks.task_name
                                            ,tasks.description
                                            ,tasks.service_type_code
                                            ,orgs.organization_id
                                            ,orgs.name department_code
                                            ,orgs.attribute1 department_name
                                            ,orgs.attribute4 budget_unit
                                    FROM pa.pa_tasks tasks
                                         ,xxdl.xxdl_valid_pta_combinations valid_pta
                                         ,hr.hr_all_organization_units orgs
                                    WHERE orgs.organization_id = tasks.carrying_out_organization_id
                                       AND valid_pta.task_id    = tasks.task_id
                                   ) budget_department
                             WHERE txn_acct.organization_id    = wo.organization_id
                               AND msn.current_organization_id = wo.organization_id
                               AND wo.organization_id          = :app_organization_id
                               AND txn_acct.cost_bucket        ='MATERIAL'
                               AND txn_acct.work_order_id      = wo.wip_entity_id
                                              AND msn.serial_number           = wo.asset_number
                              -- AND wo.work_order_status        = 'Draft'
                               AND budget_department.project_id = txn_acct.project_id
                               AND budget_department.task_id    = txn_acct.task_id
                               AND budget_department.award_id   = txn_acct.award_id
                               AND cust_prof.attribute1 (+)        = budget_department.budget_unit
                               AND cust_prof.status             = 'A'
                                             AND NVL(cust_prof.attribute2,budget_department.department_code) = budget_department.department_code
                                              AND wo.wip_entity_id  not in (select wip_entity_id from xxdl.xxdl_eam_its_pta_rollover where status != 'DRAFT')!'; 
    IF :P2_PROJECT IS NOT NULL THEN
      l_query := l_query ||q'[ AND trim(budget_department.project_ID) = :P2_PROJECT ]';
      END IF;
    IF :P2_TASK IS NOT NULL THEN
      l_query := l_query ||q'[ AND trim(budget_department.task_ID) = :P2_TASK ]';
      END IF;
    IF :P2_award IS NOT NULL THEN
      l_query := l_query ||q'[ AND trim(budget_department.award_id) = :P2_AWARD ]';
      END IF;
    RETURN l_query;
    EXCEPTION
    WHEN OTHERS THEN
      RAISE_APPLICATION_ERROR(-20001,'The system faced an unhandled exception. Please contact System Administrators for resolution with the following error code :ITS-201 ('''||SQLERRM||''').'   );   
    END;
    Conditional query of region
    pl/sql body returning boolean
    IF :P2_PROJECT IS NOT NULL and :P2_task IS NOT NULL and :p2_award IS NOT NULL  and :p2_PTA IS NOT NULL THEN
      RETURN TRUE;
    ELSE
      RETURN FALSE;
    END IF;

    Selecting all rows will never work if you have more than one page. Instead of that, you could set some kind of a flag item to a value if the select all checkbox is checked (set it to null if unchecked). If this flag is selected, your process expecting that should go over the whole resultset and process it.
    Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.apress.com/9781430235125
    http://apex.oracle.com/pls/otn/f?p=31517:1
    http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
    -------------------------------------------------------------------

  • How to get selected row of an advanced table

    Hi All,
    I have created an advanced table with 5 rows and i can also add rows in that. Here my requirement is i want to get the data of a row which i have selected. There are 5 rows. i have entered data into all 5 rows. Suppose i have selected 3rd row i have to get that 3rd row. if i have selected 5th row i have to get 5th row.
    Can you please guide me to achieve this requirement..
    Many thanks
    Murali

    Hi ,
    you have to set the firepartialaction event on your selection button, then use row refernce to get the handle on specific button
    public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
    super.processFormRequest(pageContext, webBean);
    OAApplicationModule am =
    (OAApplicationModule)pageContext.getApplicationModule(webBean);
    String event = pageContext.getParameter("event");
    if ("<ItemPPREventName>").equals(event))
    // Get the identifier of the PPR event source row
    String rowReference =
    pageContext.getParameter(OAWebBeanConstants.EVENT_SOURCE_ROW_REFERENCE);
    // write your business logic
    Thanks
    Pratap

  • Re: Getting the current selected Row & column in adf table

    Hi,
    Our requirement is we have to retrieve both the current row and column in adf table.
    We can retrieve the current row in the backing bean like
    ViewObject view = getViewObject();
    view.getCurrentRow();
    Is it possible to retrieve selected column id or column header text as we are getting for row?
    please give some sample.
    Thanks,
    Vijay.
    Edited by: Vijayakumar Palanisamy on Jun 23, 2011 2:23 AM

    Hi John
    My exact requirement,
    1.     We have collection of records in adf table
    2.     Each cell in the row has commandImageLink (Like adding approver, edit approver, delete etc)
    Currently it’s working fine for me in the commandImageLink listener, but the problem is table is refreshed 2 time,
    while selecting a record and commandImageLink is clicked, I have to avoid 2 times refreshing,
    If it’s possible to identify a particular cell in the row selection, I can avoid the image link listener.
    we are using Jdeveloper11.1.1.4.0
    Please suggest.
    Thanks,
    Vijay

Maybe you are looking for