Use GPIP for measure six point by six DMM at the same time

First Question
I will use GPIB for measure six point by six DMM at the same time. I will record the data in every mins.Could it avaiable? Is this method not accuray?
I aslo wanna to run 3 labview programme at the same. time.Each programme is same and use GPIB to measure by 2 DMM and 2 Digital In .Could i do this?

The first question is easily handled by triggering all instruments at the same time and then querying each in turn for the measured value. You can use eaither a hardware or software trigger (i.e. the gpib GET command). For your second question, are these 3 LabVIEW programs started by a single main program? How you want to run them will make a difference but in any case, the programs will have to have some sort of synchronization mechanism if you want measurements to be taken at the same time or if independent, a blocking mechanism to prevent simultaneous reads and writes. More details on the second question would help.

Similar Messages

Why can't I rotate multiple points in puppet warp at the same time?

You can rotate single points in puppet warp, and you can shift+click to select multiple points and move them at the same time but I see no way to rotate multiple points as one group using puppet warp. This would be a very helpful feature I think should be added.

Please post Bug Reports and Feature Requests over at
http://feedback.photoshop.com/photoshop_family/

Can the airport express be used to stream music and act as network "extender" at the same time?

I have a time capsule as my base station but need to improve network coverage in the other end of the house. Have a new airport express that I use for music streaming. Can this airport express be used for both music streaming and "network extension" at the same time, or do I need to buy another product?

Yes, it can. You can either:
Extend a wireless network. The Express needs to be positioned half way between the TC and the area without network coverage, and can be flakey. This is wireless only.
Use Ethernet/Powerline. This is the preferred option (called a roaming network in Apple terminology). This allows for the Express to be placed wherever you want, as long as it reaches the other end of the house.

With previous editions of iTunes for Windows, I could play a CD at the same time as it was being imported. That does not work anymore. Why not, and is there a way to do both with the most current version?

With previous editions of iTunes for Windows, I could play a CD at the same time as it was being imported. That does not seem to work anymore. Why not, and is there a way to do both with the most current version? I am running a Surface Pro 2 with Windows 8.1 and the most recent vesion of iTunes, which, in all other respects, works well. I just can't listen to an album for the 1/2 to 1 hour that it takes to import it into my library.

Two JVM's ? I thought that J2EE worked within a single JVM and run everything in containers. Can you see the two processes?

Can I use Creative Cloud for students on more than one computer at the same time?

I get different info when I read about how I could use creative cloud.
Somewhere it say I can install and activate on two computers but only run the applications on one computer at the time.
On antother place I read that I can use the applications on two computers at the same time.
So what is correct?
Can I install and activa Creative Cloud for students on my PC and my Mac and also run the applications on both computers at the same time?

I already gave you the info you seek, but you don't seem to want to accept it. Here it is in writing from Adobe's EULA (find it at: General-terms)
"4.1 Subscription-Based Software License.
If we provide the Software to you as part of your subscription to use the Services, then subject to your compliance with these terms, we grant you a non-exclusive license to install and use the Software: (a) in the Territory, (b) so long as your subscription is valid, and (c) consistent with these terms and related documentation accompanying the Software. “Territory” means worldwide, but excludes any U.S. embargoed countries and countries where you are prohibited from using the Software or the Services. You may activate the Software on up to 2 devices (or virtual machines) at a time, if these activations are associated with the same Adobe ID for the same individual, unless stated at http://www.adobe.com/go/activation. However, you may not use the Software on these devices simultaneously."
You appear to want to believe that because you think you have a way of getting around the agreement without being caught it would be okay to do. You are bound to the agreement if you purchase the subscription. Do you understand what intentionally (and with fore-knowledge) failing to honor a contract constitutes?

I want to use 2 differents programs to acces a PCI-6036E at the same time,is it possible?

LabViewApplication1.exe use:
analog output 1
analog input 1.
LabViewApplication2.exe use:
analog output 2
analog input 2
digital output 1.

Hello,
The way it looks like you are describing, no, it would not be possible. Think of the Analog input and Analog output circuitry as a resource. All analog input channels must be configured and used within the same task. You must clear that task in order to add/change the channels used. The same is true for analog output.
However, you might not have this limitation if you are doing acquiring/generating single-point updates. (The "task" is cleared as soon as the point is retrieved/output.) So one program could acquire one point from channel 1 and then the other program could acquire one point from channel 2. The same would be true for analog output and digital I/O.
You should be aware that The Traditional NI-DAQ driver is only single-threaded. So,
though you may be able to have two processes running "simultaneously" that both have access to the driver. They had better not try to both initiate a function call at the exact same time or you will get an error. (So to insure reliability, you would have to manage your code such that this doesn't happen.)
Russell
Applications Engineer
National Instruments
http://www.ni.com/support

We have a PCI-6110S to run our VIs. But, we are planing to buy another card (PCI-6024E) to run real time PID vi. So, if they are installed at the same computer, would it be a problem for LabVIEW to run both of them at the same time.

We have PCI-6110 S series installed in our computer. We are planing to purchase PCI-6024 E series card. They will be both installed at the same computer.
1) I am wondering if we run both of them at the same time, would we have any problem?
2) To run PID real time, can any E series of PCI card be used?
Thanks...

Hello Baho,
1) Using Traditional NI-DAQ, there could be problems with the fact that the NI-DAQ driver is not multi-threaded; meaning that while waiting for one operation to complete, the driver could cause another operation to time out. On the other hand, DAQmx is multi-threaded, and would eliminate this problem. At the time of this writing though, DAQmx does not yet support simultaneous-sampling boards like the PCI-6110S. A good solution then would be to use Traditional DAQ for the 6110S and DAQmx for the E-series board, and they would by default run in separate threads.
2) No, using a PCI E-Series board, the LabVIEW VI would have to run in a Windows OS and would not be Real Time or run deterministically. You can run the PID program in Windows, but the
results could be inconsistent. The advantage of a Real Time is that the OS is deterministic or that the OS allows you to tightly control or determine the maximum time any function takes to operate. This kind of control of the maximum operation time is not possible with non-Real Time OSs such as Windows.
If you would like to get set up with a Real Time System, I suggest you contact your Technical Sales Representative.
Regards,
Chad Evans
National Instruments

Use one external harddrive on both pc and mac at the same time

i bought an iomega external harddrive today
can i use it on both mac and pc at the same times?
for ex:
when i plug in both computer
i could able to read and write on the hdd on both computer
since i format it into 4 partitions (2 journal and 2 doc)
so i wish i can use them separately in 2 computers

Hi Jerry_L and welocme to Discussions,
using such USB or Firewire connected external harddrives with two computers at the same time is usually not recommended by the manufacturer.
Doing so might lead to data-loss and the like.
Check with the manual of that harddisk to verify.
Using it with one computer at a time with your partitioning should be doable.
Regards
Stefan

Can i use a bluetooth headphone and a bluetooth cycle computer at the same time on a 4s?

I was wanting to get the wahoo bluetooth enabled cycle computer and heart rate monitor and use it at the same time as I use bluebird bluebuds bluetooth head phones. Does this many divices work at the same time?

No, you can connect only one bluetooth device at a time.

HT204053 how cant i use find me and see all my 3 iphones at the same time

how can i use find me and see all my 3 iphones at the same time

I assume you mean Find My iPhone.
You must have the Find My iPhone service turned on inside each phone (Settings>iCloud). Then either log into icloud.com and go to the Find My iPhone page to view a map and list of device, or use the Find My iPhone app on any device.
"at the same time" - no you only view one map (associated with one phone) at a time. You can't get all three phones on one map.

Is it Possible For Internal & External Speakers To Be Active At The Same Time?

Hi,
Anyone know if it's possible for the internal speakers on a MacBook to be active at the same time as external USB powered one's?
Cheers
Wayne :-)

Cheers for the reply Dominic,
Yeah i know there is no Preference setting in ML-just wondered if a work around existed/bit of code within terminal or an App or a kernel ext. script to bypass it?
Regards
Wayne :-)

RD330 - using PCIe-based SSD and on-board RAID controller at the same time?

I've got a RD330 (4304-E1U) with the on-motherboard RAID controller and an OCZ Z-Drive R4 PCIe-based SSD. Basically the SSD looks to the system like a PCIe SATA controller with a single SATA disk attached. If I leave the on-board RAID disabled in the BIOS (Setup -> Advanced -> Sata/SAS Configuration -> Disable SCU Devices=ENABLED), then the system sees the OCZ drive just fine and I can select it as my boot device. Works like a champ, screaming fast.
I *also* need access to the disks attached to the built-in SAS backplane on the server, but if the on-board RAID is turned off, then you can't access those disks. When you go into the BIOS setup and turn on the on-board RAID (Setup -> Advanced -> SATA/SAS Configuration -> Disable SCU Devices=DISABLED), then the LSI RAID array configuration shows up during POST (as expected) but the OCZ messages do NOT appear during POST, and the OCZ no longer shows up in the BIOS as a boot device. It's like the SSD isn't even there when the on-board RAID is turned on.
I don't really need any RAID functionality on those disks, I just need access to them from the OS, but I need to boot from the SSD in the PCIe slot. Is there a way for both the on-board RAID controller *AND* an additional PCIe disk controller to be active at the same time?

I have had a 2.0 USB hub connected to the USP port on my AEBS for almost a year for a printer and a HD. Initially I had intermittent connectivity to the HD but never the printer. As Apple upgraded the software/firmware for the AEBS, the problems have stopped. Reliability has been 100% for several months. Go for it.
Regards,
Brian

Only six forms can be open at the same time

Hello
I'm programming with oracle forms 9.0.2.11.0, DB Oracle 9i, VMS.
In my application it is nessesary to open more than six forms, which someone have relation to the same tables.
After open six forms, the message is show, no other forms can be open.
Why cann't I open more than six foms. Is there any restriciton in forms 9 or it is possible, that forms, which have relation to the same DB-Tables make the problem? Or is the query-mode or record-mode the problem?
Thank's for your help and your help by the solution.
King regards
René

are you working in the environment of a framework. Maybe there are some restrictions, which says: Max. 6 forms.
Try this: Create a form a.fmx with only a button in and the WHEN-BUTTON-PRESSED
call_form ('B');Then duplicate this form, save it as b.fmx and change the triggercode to
call_form ('C');after several tries you have enough form to check your statement. It takes only 2-3 mins to do this.
If you now can open more than 6 forms, then your problem is in your application
try it
Gerd

How do I get all 'exclamation point' songs to show at the same time?

Please help!
I need to delete TONS of broken tracks... they have all been reimported, but
the same old tracks with the exclamation points remain in my library!
What's even worse is you have to click on each individual track, just to get them to show whether they have the exclamation point? There has got to be an easier way!
Does anyone have any suggestions on what i can do to make ALL the tracks that are broken, show their exclamation points?
Thank you!

Hi
Maybe you can solve your problem by executing the following action :
+Open iTunes in "safe mode" (without external plug-ins) by using the keyboard shortcut Command-Option (while opening iTunes).+
This will open iTunes in safe mode, which disables some plug-ins ...
But normally all exclamation marks will disappear ... at least it solved my problem.
I hope this helps

Can I use a bluetooth headset and a bluetooth isimple remote at the same time?

I use a wireless headphone when I ride my motorcycle and its great, but I would like to hook up a remote that would allow me to skip tracks, pause, and adjust volume.
I found this:
http://www.amazon.com/iSimple-Portable-Wireless-Smartphones-Bluetooth/dp/B00KPZN 5UC/ref=sr_1_1?ie=UTF8&qid=1428870380&sr=8-1&keywords=isimple+remote
I need to know if I can use it and my wireless headphones at same time before I buy it though since they both use bluetooth

There is no wired controller I know of. Your wired headphones should have a controller on them.
You can connect more than one BT device to an iPhone you just cannot use more than one A2DP stereo Bluetooth device or Handsfree Headset. Check with the iSimple people and see which BT profile they are using for their remote. If it is low power bluetooth then you can use it with your headset.

Use GPIP for measure six point by six DMM at the same time

Similar Messages

Maybe you are looking for