Use MSGID to find Message Interface via tables in XI

Hello,
I'd like to use a Message ID to search some table and find out what Sender Interface was used. Is there a table that stores this information?
Thanks,
Matt

I've tried both of those tables and the Sender Interface (Example: 'PurchaseOrderRequest_Out') is not stored in either.
Can you explain how I could find that information?
Thanks,
Matt

Similar Messages

Use exported parameter from message mapping (via UDF) in next mapping prog

Is there any chance to assign an exported parameter from one message mapping to another mapping program within an operation mapping?

Hi,
Try using dynamic configuration
1. Set value in message mapping and
2. Get value in java mapping
Refer this link http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/content.htm
Regards
Suraj

I am not viewing message interface for sender service in sender agreement

Hi Experts,
Right now we have one interface setup in XI for sending the data to three customers using BPMs.
Now i want to add to one more customer in to current xi setup and send the data.
so i have created all the types like message type, message interface and interface mapping.
Already i have scenario in ID i have created Comm channles.
so when i create sender agreement i am unable to find message Interface which i have created in IR for sender business service.
I have not created new scenario but using the same scenario.
Kindly help me out from this.
Appreciate for your response.
Thanks,
Bhasker

Hi,
Make sure to add the inbound and outbound message interfaces in the Business Service so that they will be available in Sender Agreement.
Hope this helps.
Thanks and Regards,
Kalpesh

HT201210 I'm trying to update my iOS to 6.0, using iTunes (with my 4s connected via USB and WiFi is on also). I get a message that 'there are purchased items on my iPhone that have not been transferred to my iTunes library. Yet, I can't find those items!

I'm trying to update my iOS to 6.0, using iTunes (with my 4s connected via USB and WiFi is on also). I get a message that 'there are purchased items on my iPhone that have not been transferred to my iTunes library. Yet, I can't find those items! Help! There is not error message number just the text message. I've searched for an answer but have found nothing on "transfering items purchased to your iTunes library".

Right click on your device icon on the left pane of iTunes and click on transfer pur....

Table to find the interfaces for a system

Hi,
I need to find the number of inbound and outbound interfaces for a particular system.
Is there any specific table to find the total number of entries?
WE20 is a transaction to find it out manually. But I guess there is some table where we can find it in a easier way.
Kindly reply...
Thanks!.

Hi
You need to find the Message type and IDoc types
use table EDBAS for IDOC types and
EDMSG for finding message types
EDPP1 for all partner profiles
EDP12 and EDP13 for inbound and outbound views
Reward points if useful
Regards
Anji
Message was edited by:
Anji Reddy Vangala

Payload via the message interface

Hi all,
Is it possible to get the payload/log information for the XI message from the table SXMSPMAST via the message interface name ?
Thanks for your help

Nope.
But you can get details from table SXMSPEMAS. I think best would be you can create a view with join on MSGGUID with SXMSPMAST and then you can filter records base on messsage interface name. Field "OB_NAME / IB_NAME" from table SXMSPEMAS indicate outputbound / inbound interface name respectively.
You can find all othe fields here.. Interface Namespace, Communication Party..so on.
Hope this will help.
Nilesh

Error: Message interface is not used by this process Netweaver PI 7.0

Hi All,
I am receiving this error in file to idoc scenario. The file is being picked up by communication channel. Then through an interface mapping IM_MET_ROUTE is being forwarded to a BPM MET_FILE_ROUTE. The MET_FILE_ROUTE forwards it to different BPM depending on file type. whenever I am posting a file it is not reaching IM_MET_ROUTE and giving an error as shown below.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">MESSAGE_NOT_USED</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Message interface is not used by this process</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can you please suggest any solution to remove the error.

Hi All,
Thanks a lot Vikrant for your suggestion. The error is resolved. This was not a configuration problem. This was a design problem. Initially I also looked for configuration changes but that was correct hence I came to conclusion that this might be a design isuue.
These are the steps that we should follow to resolve the errors
1. First Check your configuration again and again with test tool and payload to find where exactly your configuration is failing.
2. The above step will not be successful since we are already receiving the error.
3. The above test will fail in interface determination step.
4. Please go through the interface determination in Integration repository(PI 7.0).
5. Check whether all interface mapping,source and target message interface are proper or not.
6. if receiver or sender of message is an BPM please look into their receiver and sender element message type.This must match with the one specified in Interface mapping defined within Integration directory( in the interface deterination step).
In my case the sixth step above was the solution.

Message interface is not used by this process

Hi,
I´ve created a process to get a txt file in the O.S., verify this file and create another file. This verify I´m using BPM but there is an error message:
"SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">MESSAGE_NOT_USED</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Message interface is not used by this process</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>"
Could you help me,
thanks,
Renato

Hi Renato,
Can you please elaborate what you did you do to eliminate the problem. I am facing the same one now.
A file is received followed by FCC and then a interface mapping is to be called. somehow the system is unable to find the necessary mapping and giving this error.

Unable to find the Message Interface Receiver Determination

Hi Everyone,
I am unable to find the Message Interface Receiver Determination in the SAP BASIS 7.0 --> http://sap.com/xi/XI/System. in IR.
I am using P.I 7.0 SP 15
Could anyone let me know what could be the problem.
Regards,
Varun

Hi Sridhar,
I cant find the Message Interface Receiver Determination in IR under the standard SWCV SAP BASIS 7.0 and under the namespace http://sap.com/xi/XI/System. in IR.This Message Interface will be useful while configuring in enhanced Receiver Determination.
http://help.sap.com/saphelp_nw2004s/helpdata/EN/84/e8763c997fda50e10000000a11405a/frameset.htm
Regards,
Varun

How to find the interface with the help of target table name

Hi friends,
Whether with the help of target table name, is it possible to find the interface name that invokes this target table in ODI 11.1.1.7.
Thanks in advance.
Regards,
Saro

highlight the datastore in the navigator, expand its sub tree, there is a 'populated by' node, under the node, it will list all datastores which are used as sources to the current datastore
then expand 'used by'->interfaces, it will show all interfaces which include current datastore(but maybe current datastore is used as source)
that's all you can get from UI, otherwise I suppose you can use SDK.

How to find message type by using message number and application area

Hi abapers,
I know the message number and application area , how to find messagwe type.
i.e weather it is error message or warning message.
MESSAGE NUMBER IS :219.
APLLICATION AREA IS : FS.
in which table i had to check.
i checked in t100 table , but i am unable to find message type.
please help me to solve this.
regards

hi,
go to se91
enter area and message number.
then click on display.
then go to utilities tab >> where used list or press shift + ctrl +f3
there list of program will show .
choose your program name
then u will get ur mesage infoemation by double click on ur program name
thanks
sachin

Using one Message Interface for all mappings

Hi Folks,
I am using a BPM in which i m getting a file from file system which have system ID in it.
I am having three send Synchronous step following that.
What i need is to use the Message interface for file to be used for receiver determination based on system id in case of Synchronous interfaces.
DO i need to include this File msg. interface in each mapping, if i do so will it be possible to send req. and get response for synchronous call.
OR is there any way to to use the file msg. interface for each mapping.
we are on SP17,I also tried Extended mapping but i am having SYNCHRONOUS send steps.
Plz help me out
Sachin

Bhavesh
1. You receiver a file in your BPM . This has a field called SYSTEM ID?
2. On the basis of the System ID field you need to determine the Receiver to which the Synchronous Request message has to be sent?
Sorry for that...because I was confused with jai's ans.. that's why said like that
You are absolutely correct
This is what i want to do.
i can't use switch step here. my BPM looks like this
RecFile->sync send->transformation1->transformation2->sync send2->transformation3->BLOCK
in BLOCK
Sync Send3->transformation4 and so on...
I am using three different Sync ABS Interface for each Sync send steps.
In receiver determination i want to get the data from respective R/3 system based on system ID i.e. logical system in File MI.
Say if it T90CLNT90 then get data from BS_SAPR3_4.6 else from BS_4.7
Sachin
Message was edited by:
Sachin Dhingra

Error messag -'Error while determining ref.mov.type for WM via Table 156S:'

Hi Guys,
I am currently facing some issues with respect to the deliver creation.
The scenario is somthing like this.
I have assigned a FOC Item category to an Consignment Issue order type.
The system is able to determine the Item category successfully.
However when the delivery is created it throws an error message
'Error while determining ref.mov.type for WM via Table 156S: 903/X/X/W/L/X/'
Not sure why this occurs.
All the settings seem to be set.
If any one of you can help me out it would be great.
Thanks.
Regards,
Pandi

Dear Pandiraj
The standard process is that consignment issue order should be created with reference to Proforma invoice. Having said that I dont understand why you have assigned a FOC item category to issue order. Not sure, whether this will work. Also I feel that you should explain in detail the process for which you are configuring this.
thanks
G. Lakshmipathi

BPM : Message interface is not used by this process

Hi,
In BPM : to pass the message facing error as below.
Messages not reflecting in BPM monitor.
I have configured Recveiver - transformation - sender in BPM.
In recvier in BPM is configured with Abstract Type as same in the message mapping.
Is there any thing i am missing?
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">MESSAGE_NOT_USED</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Message interface is not used by this process</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have refered links but not able to get the clue for this error as its from the Call adapter.
error: Message interface is not used by this process Netweaver PI 7.0
BPE_ADAPTER: MESSAGE_NOT_USED
Regards,

Hi,
I just saw your IP design and from this I can see that you have message mapping between Sender(as in Outbound interface MIOASY) and abstract interface (as in MIAASY) and then in that you have used transformation step to utilise Interface mapping which is between same abstract interface which is not required at all as message type for both the interfaces is same. For me, what your configuration would be is
1. Sender agreement to fetch the message from outbound interface(MIOASY) utilising communication channel with whatever adapter you have used
2. Receiver Determination with Sender and sender interface as MIOASY while receiver as IP(Integration process)
3. Interface determination between
 a. Sender and Outbound interface and Abstract interface with interface mapping IM_Sender
 b. IP as sender with abstract interface MIAASY and receiver interface MIIASY with no interface mapping being used as it must be of same type as receiver interface is
4. Receiver agreement with MIIASY being used as receiver interface and communication channel utlililsed to convert it into receiver format.
If I am assuming it correct then if you see then inside BPM we are not using receiver interface MIIASY which is why I feel this error is coming.
However, if you design it something like this then I feel the error would get resolved
Design
1. Make one abstract interface (MIAASY_Sen) of same type as sender, and create another abstract interface (MIAASY_Rec) of same type as your receiver message type
2. Create message mapping between sender message type and receiver message type, Interface mapping IM_ABS - (MM_ABS_ABS) between sender abstract interface (MIAASY_Sen) and receiver abstract interface (MIAASY_Rec)
3. BPM should be something like this
 Container:*
rec Abstract Interface MIAASY_Sen
send Abstract Interface MIAASY_Rec
Receiver (rec) - Transformation (IM_ABS) - sender (send)
Configuration
1. Sender agreement to fetch the message from outbound interface(MIOASY) utilising communication channel with whatever adapter you have used
2. Receiver Determination with Sender and sender interface as MIOASY while receiver as IP(Integration process)
3. Interface determination between
 a. Sender,Outbound interface MIOASY and Abstract interface MIAASY_Sen with no interface mapping
 b. IP as sender with abstract interface MIAASY_Rec and receiver interface MIIASY with no interface mapping being used as it is of same type as receiver interface is
4. Receiver agreement with MIIASY being used as receiver interface and communication channel utlililsed to convert it into receiver format.
Let me know if it works.
Regards,
Amit

Is it possible to find the transaction code via table name ??

Hi
Can any body please let me know is it possible to find the transaction code via table name ??
Thanks in advance
Sesh
Edited by: seshu_sapfico on Dec 8, 2009 12:21 PM

Please, specify your requirement... A table could be modified by various programs which are called by numerous transactions.

Use MSGID to find Message Interface via tables in XI

Similar Messages

Maybe you are looking for