Use of Active Button in Header Condition Tab Page
Dear Friends
What is use Active button and what it work in Sales Doct Header Condition Tab page
Thanking you
Arun
Hi,
When you if enter a header condition type for e.g HB00 & enter the amount & click on activate, then it will activate the condition type in the pricing document.
Hope it will solve your problem.
Regds........
Sumit
Edited by: Sumit Rayaguru on Feb 9, 2009 7:22 AM
Similar Messages
-
Activate Button in Header Conditions Screen
Hello,
Can somebody tell me the purpose of 'Activate' button in Header Conditions Screen of Purchase Order (Trasaction ME22N)?
Thanks for your help.
VenuHi venu,
generally condition types are three types,
these are specified when you are defining the condition types in configuration
Header condition
item condition
Group condition
1 ) header condition applied for all line items,
which in form of percentage or fixed amount,
if it is % applicable that % for all items,
if it fixed distributed among the items with their values
eg : fixed amount is 500,
3 items are 2000,2000,1000,
distributed like 200,200,100,
important thing is its not possible to give the access sequence for header condition
2 ) item condition:applicable individually for items,
can give the access sequence to that
3 ) group condition :
this relates to several conditions,
in thecase of group conditionthe values of the relevant items are added and total used as the condition base,
this is flexible for scales,
if this useful reward points
rgds
lakshmi Reddy -
I am using Firefox Version 17. Previous versions had a triangle on the right end of the toolbar that would show a list of tabs open on the window. I no longer see it.
It was described in the "Help" instructions as follows:
There is a tiny little button, you may have been ignoring. It does something wonderful. It looks like a really small downward triangle. Use that little button to engage the tab list.See also:
* Permanent List-all-tabs Button: https://addons.mozilla.org/firefox/addon/permanent-listalltabs/ -
Hi All,
I have the following requirement. I need to access XKOMV structure when the sales order header screen-condition tab is accessed. this structure has different value in run-time at header and item level. I want the value of XKOMV when header condition is accessed. which screen number should i filter in my user exit? I tried SY-DYNNR = '5002' but control never goes there. please advise.
Thanks,
BinitaCan you please try using requirement routine for that particular conditon type?
In that routine you can get the correct value and even pass to memory parameter...
Thanks. -
VA02 - Header Condition Tab - Pricing Authorization
Dear all
One of my requirement is that, In Sales Order VA02, VA03, VA01 - in Header level Condition tab - I want to hide the Cost Price line only.
I am able to do that Detail (Item level).
But header level, it shows the Cost Price.
Can someone hlep me, how to configure that not to display it based on authorization
Regards,
VenkatHi
Maintain the condition type as header condition as well in SPRO -MM - Purchasing - Conditions - define condition types.
If you want it to be called in PO automatically then remove tick marks - required and mandatory in calculation schema for that vendor.
thanks -
Since my update, I cannot scroll using the scroller option that slides down the page and my iTune downloaded podcasts will not sync to my apple tv. Any ideas?
Hello there, breezyandrade.
The following Knowledge Base article offers up some great information on setting your scroll bar preferences. Although written for Mountain Lion it provides accurate location for this preference in Mavericks as well:
OS X Mountain Lion: Change how scroll bars work
http://support.apple.com/kb/PH10895
Use General Preferences to customize scroll bars in windows.
Choose Apple menu > System Preferences, and then click General.
Set the scrolling options. For more information about the scrolling options, click the Help button.
Some apps let you scroll through a document in other ways, such as by dragging in the document, using arrow keys, or pressing the Space bar.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Using events (?) to share data between tab pages
I don't know whether this is an event question or an Object-Oriented design question or a JTabbedPane question.
I'm pretty new to Java, so be patient!
I wish to have a JTabbedPane with a tab to do 'Import' of data, and a tab to do 'Export' of data (the SAME data which was imported). Now, how do I share the data between the 2 tabs?
It seems the data belongs at the JFrame level, but then how does the data in each tab access it? In other languages I would pass a reference to the data object in the window to each tab.
Or how do I get (or set) the data when the tab changes? And how do I know when the tab changes?
I think I need to set trigger some sort of event to the parent window, who I suppose has a listener, and then it can then query the appropriate pane? If so, I'm not sure what sort of event trigger I should be using, where etc.
I know if I had one tab with an import/export functionality then I could declare the Collection within that panel.
Help!!!
Thanks ;)I think this is an OO design question.
You basically have two views (the two panes) of the same data. So I'd suggest the Observer pattern (see the Design Patterns book) where one model holds the data and the model is observed by several views. -
Purchase order -Conditions tab
HI
Any one can explain me in detail about Conditions tab in Item Overview of Purchase Order in that we have 3 tabs like
1. Condition record
2. Analysis
3. Update
please explain me which tabs are used in what conditions ?
Thanks & Regards,
senthil.Hi
1) Condition Record: keep the cursor in the condition type PB00 and click the condition record it will take you to the detail condition record were you can check whether scales exist (or) Not
2) Analysis :In this you can check all the condition type and whether automatic entry (or) manual entry can be seen
3)UPDATE
Hi,
YActivate button in the condition tab.
The purpose of this activate button is to activate the price in the P.O.
Eg : You have created a P.O (04.07.2008) with Purchasing info record(PIR) and the price has flown from PIR say Rs 100.00
After sometime you have changed the price to Rs 150.00
In the P.O if you have not received any goods you go to ME22N and press the activate button the price Rs 150 will be flow from the PIR for the same P.O ,you do not need to raise New P.O.
Please try.
G.Ganesh Kumar -
Dear Fnds,
I created 2 Header condition types ...in PP
Whenever i create Sales Order...these 2 condition types are Comming into Sales Order item Condition and Header Condition Tabs...but i need to maintain only at Header level
What could be the Prob?
Thanks in Advacne
RejHi
How come the Header conditions are coming in the Sales order automatically.
Remember, Header conditions are always mannual there are not determined automatically , they do not contain Access sequence.
You have to enter those in the Sales document at Header level.
In the condition type (V/06), mark the condition type as "Header condition", remove the any activation from "Item condition" check box.
Remove the Access sequence if any you have specified.
In the Pricing Procedure mark the condition types as "Mannual".
Now, in the Sales order, go to the Header details > condition screen and enter the Header condition mannually with the amount as required by you.
It will be copied to each item by default.
If you want that, the header condition amount should not be copied to each item, instead it should be distributed, then in the condition type(V/06) , mark the Header condition as "Group condition "> -
In Invoice header conditions pricing values updated as u201C0u201D
Dear guruu2019s
I am facing the below error can any please suggest me on the same.
We have created the sales order with 3 line items and we have created 3 individual deliveries and 3 different invoices but for the 1st sales order line item we observed that at invoice level the pricing conditions are not updated at header level the values are u201C0u201D. But the same has been update at sales order level and rest off the 2 sale order (2&3) line items all the invoice has been updated properly.
Dear guru can any one suggest what all reasons that will impact our header condition to update the values as 0
Regards,
BhanuDear Guru's
This is in continuous of the above mail
We observed that in the invoice item level in pricing tab Statistical values field has been updated as option Y- No cumulating- value can be used statistically. If the option is u2013 System will copy item to header totals then automatically the pricing values gets updated in the Header condition tab.
Here my doubt is how system updates this value. If I would like to change the same it is in grayed out mode. Please suggest me the same
Regards,
Bhanu Prathap -
Use of Catalog button in Service Order
Hi,
In the Service Order creation (IW31) screen, I find "Catalog" button in the Components tab Page. What is the purpose of this and how do I configure its determination ?
Thanks.
RajHello,
Its an option to select components from a suppliers or other electronic catalog using OCI (open catalog interface) standards.
See SAP help:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/b0/df293581dc1f79e10000009b38f889/frameset.htm
Look under: Orders - Order processing - Catalog Interface (OCI - Open Catalog Interface)
-Paul -
Net value on condition tab in a STO
Dear Guru's
I have manage to get the valuation price displayed in the STO PO condition tab in condition P101.
I've also managed to get the P101 condition to display in the net value field in the condition tab when pressing the "update price" button in the condition tab.
However, how do I the condition P101 to display in the net value field automatically?
I have it done in our old 4.7 system but do not know how I did it
Thanks in advance,
ThomasMissed a transport
-
How to add new tab page to equiment ?
Dear Guru's
i created the new equipement category K by coping the standard S.when i am creating the equipment while using equipment category S i am getting tab pages General,Location,organization,structure,Sales and Distribution.
But while using the equipment category K for creating the new equipment i am getting the tab pages General,Location,organization,structure 4 only.
why the 5 one Sales and Distribution is not coming ?
how to add new tab page like Partners ?In that fields like sold to party,ship to party ?
Could anybody help me in this regards
Thank you
suribabuIn Equipment category creation config in IMG, check for the View Profile for both the equipment category S & K.
For adding new tab, follow the IMG path.
PM & CS => Master data => Technical Objects => General Data => Set view profiles for Technical objects
Select the View profile which has been assigned to your equipment category & click Activity & layouts of views. In that screen, under seq.no, select the Partners.
Do the same for other requried tabs based on your requirement.
If there are same profile assigned to both equipment category, go to equipment creation creation => Edit => view selection. There you will find the required tabs. -
WAD: anyway to bind each tab of the tab page web item to different query?
WAD: anyway to bind each tab of the tab page web item to different query?
We check the properties of the tab page web item, but can't find we can bind the tab to some query.
Any idea?
Thanks!will try to write as much detail steps as i can...
drag tab page web item in wad window
go to its properties
for e.g. u currently have only 1 tab page
than name tab page1 as p1
hit button with ..
this will let u add new heading to tab page 2
likewise save heading of 4 tab pages in properties of tab pages
now choose container web item
drag it in tab pages window
assign seperate analysis item in each container item
assign seperate queries in each analysis web item.
assign container1 to tab page1
assign container2 to tab page2
assign container3 to tab page3
assign container4 to tab page4
and their heading viceverssa
save it execute it
now u will have 4 queries in 4 container item and uc an see that in different tab pages. -
Reg: additional tab page in cProjects
Hi all,
My requirement is to add a new tab in the cProjects screen .How can I have this. Either I have to use user exit or any other code in Se80. Could any one reply me.
Thanks in advance,
Regards,
S.Jenibalet.Hi,
All you have to do is first
1) Go to spro and under collaboration projects-> Additional tab page
2) Give the object type ie for example if you want to have an additional tab page in phase of cprojects or checklist etc..
3) Then give the project type for example deveopment project or consulting project etc
4) Then check field tab active so that the additional tab page will be displayed
5)Give a title eg. additional tab page for phase in tab page title
These will be enough to get a additional tab page in cprojects screen But if you want to design the layout then you have to create a webdynpro component and give the name of the webdynpro component in the webdynpro component field.
Buy strictly following all these steps will definitely get the additional tab page in cprojects 4.0 version.
In cprojects version 3.0 you have to implement the badi for additional tab page with the method GET_ADD_TAB_DATA
Maybe you are looking for
-
How can I send photos in an email without them being embedded (and therefore un-downloadable)?
-
BEA WLS 9.0 java.lang.NoClassDefFoundError: utils/ImportPrivateKey
Hi I'm newbie on this forum and on BEA WebLogic 9.0. I have to import my certificate in the keystore in order to setup SSL connection. I'm trying to use the java utils provided by BEA WL, but I have this error: bash-3.00# java utils.ImportPrivateKey
-
Trees laying on roadside telephone wires
I have been reporting multiple trees and limbs lying on the roadside telephone wires in my neighborhood since November of 2011. These are not just branches and twigs but entire dead trees and very large branches that have been lying on the wires sin
-
I have this error trying to setup the environment : ORA-32101
i have this error trying to setup the environment : the execution : []-pedro:/home/pedro/modelo_v4>./occiteste inicio do programa antes do env _environment Can't set the environment: Error while trying to retrieve text for error ORA-32101 []-pedro:/h
-
Hello all, we are trying to explore all reports available in MDG-F 7.0 SP1 and don't have clue of how to enable the reporting function. Currently we are getting an error message saying that URL service is terminated once a linkage to the report is cl