Use of DIAdem IRIG106 plugin with PCM data

I have a large Chapter 10 file (1.5GB) that I am opening with the IRIG106 plugin (version 1.1.0.5773) in DIAdem 2012.  Due to the file size I am actually "registering" the file, which displays the correct channel names and attributes in the Data Portal.  The channels I am interested in are a time channel and a PCM stream channel but I don't see how to proceed further.  I have knowledge of how the PCM frames are arranged and such but how do I apply that information to breaking out all the individual channels in the frames (i.e. decommutating)?  Do I write the PCM decom myself or is there some other (more efficient) method?  Thanks!

Hi, Brad!  The PCM data appears as one of the channels in the Portal.  This wiki article gives a good refresher of how the data is arranged wtihin the minor/major frames of a PCM frame (" http://en.wikipedia.org/wiki/Frame_synchronization ").  I happen to know that the data words are 12-bits, which means that each data word is NOT aligned on byte boundries.  If you know of a good method of lining up the frame syncs and assembling each frame to extract the words for the PCM channels, I'd love to hear it.  I have to register the Chapter10 file due to the size and, so far, whenever I touch the PCM channel DIAdem feels a need to read through it, which takes longer than I have been willing to wait.  I'll try to cut down a file to something more managable to see if you can do something with it.  Thanks!

Similar Messages

  • I'm trying to use Imagenomic Noiseware Professional plugin with a trial of  PS CS5...

    I'm trying to use Imagenomic Noiseware filter with a trial of  PS CS5... I have the license key but it hasn't asked for it...
    my other plug ins are working fine...ish
    please help
    I have a job to finish
    thx

    I'm working on Imac OS X 10.5.8
    It's PS CS5.1 v12.1 x64
    I ran the installer and get an error message that PS does not recognize this type of file
    I know about the compatiblity but came across this little nugget...
    Imagenomic plans free plug-in updates for CS5
    Good to know:
    Imagenomic will be providing FREE compatibility updates of its Plug-in Products (Portraiture, Noiseware and RealGrain) for Adobe Photoshop CS5. Furthermore, we will be providing a FREE update for registered users of the Portraiture Plug-in for Lightroom to ensure compatibility with Adobe Photoshop Lightroom 3… For Mac OS X: We will be releasing compatibility updates to make sure our Plug-in products are fully compatible with Photoshop CS5 in both 64 and 32 bit mode.
    now just need to know how to make it happen...
    thanks

  • I received a massage to upgrade carrier, after upgradtion I am not able to view the APN setting which earlier was showing. Please advice how to resolve the problem as I am not able to use internet on my mobile with my data sim.

    Hi,
    I am using Qtel data sim at Doha - Qatar. I have receive a message to upgrade your carrier which I did.
    Unfortunetly after upgradtion I am not able to view and edit the Cellular data setting & APN setting.
    Please help me out as I am not able to access internet.

    Hey Shaiju isac,
    I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Cheers,
    David

  • In labview 64bit, Use PostLVUserEvent with user data cluster, unhandled exception occured.

    My labview is Labview 2009 64 bit, I use PostLVUserEvent to post message with cluster data to labview. The following is  the struct in dll:
    typedef struct {
        int32 dimSize;
        uInt8 elt[1];
    } TD1DINT8;
    typedef TD1DINT8 **TD1DINT8Hdl;
    typedef struct{
       int32       interruptSource;
       TD1DINT8Hdl portData;
    }DIInterruptData, *PDIInterruptData, **HDIInterruptData;
    In labview, the DIInterruptData corresponds to a cluster, in which there are a int32 integer and a uint8 array. 
    It works well in labview 32bit. But in labview 64bit, unhanlded exception occured. why?

    Hi Danil,
    when complaining about double-posts one should provide a link to the other thread to guide other users...
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • I would like to use your 6035E with Matlab, Data aquisition toolbox.

    What drivers do I have to have to use the 6035E AD card with Matlab, Data aquisition toolbox?
    thanks

    You will have to check with Mathworks and see if they have a driver for that board that works with their software.
    Otis
    Training and Certification
    Product Support Engineer
    National Instruments

  • I am unable to use my e mail account with firefox and being referred to internet explorer

    when I try to use my e mail account to compose a letter it will not come up with the screen'''frid'''

    https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox
    https://support.mozilla.com/en-US/kb/Opening+PDF+files+within+Firefox

  • Can i go back to the previous version, i have a plug in i need to use that does not work with ver. 4

    I have norton's password manager which i use many times per session. It is not supported by MF 4.0. I really need to go back to the previous version.

    https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox
    https://support.mozilla.com/en-US/kb/Opening+PDF+files+within+Firefox

  • Assigning InfoObject with Master Data as InfoProvider

    Hi,
    In BW 3.x we used to assign the InfoObject with Master Data as InfoProvider only if we want to perform Query on that InfoObject.
    But in BI 2004's, is it must to assign InfoObject with Master Data as an InfoProvider???
    Because when I create the Transformation to load Text or Attribute Data, the system automatically assigs that InfoObject as an InfoProvider.
    Is there a way to skip using that InfoObject as an InfoProvider during Tranformation if I do not want to perform any reporting on it.
    Thanks,

    Hello Sesh,
    No. It is not possible.
    However for easy grouping, create another infoarea and attach all report relevent infoproviders under this infoarea.
    Ravindra

  • Modbus ASCII software protocol with 8 data bits

    Hi All,
    I must communicate (serial) with a Handheld 3016 device (a particle counter from LightHouse). It uses Modbus ASCII software protocol with 8 data bits.
    Every Modbus ASCII software protocol, I have been looking through use 7 data bits.
    Any kind of Modbus LabVIEW libraries (old one like nimodbus.llb or new one like ni_lib_modbus_library-1.1.5.38.vip) let the chose to “tag” RTU (8 data bits) or ASCII (7 data bits).
    *** There is nowhere ASCII with 8 data bits ***
    I always get a kind of “framing error”... obviously since I can't set the com ok...
    Any advices??
    Thanks a lot for any help
    Vids65

    Wayne,
    Thanks indeed for answering
    Have a look at the document attached, page 111, appendix C.
    It looks like a very standard Modbus setting except the Data Bits numbers... :?
    Have a good day
    Attachments:
    248083400-1 R2 (Op Man H2016 H3016 H5016 Gen E) Letter.pdf ‏5041 KB

  • Diadem 11 crashed when using AOP5 plugin with no specific error

    We have a ASAM-ODS database and are running a Avalon v4.2e server. DIAdem data TDM file is uploaded using openMDM client.
    We have installed AOP5 plugin on 2 systems running DIAdem 11 to access the data directly from the ASAM-ODS database. On one machine it is working fine.
    On the second machine with the same parameters, when we try to connect, DIAdem hangs and then crashes with no specific error in the log file. DIAdem is not able to refresh the Navigator window and show the data stored in the ASAM-ODS server. The relevant errors are attached and also the log file of the plugin.
    How do we debug and resolve the issue? Any pointers would be welcome. We are using aop5dataplugin2_0_1.exe downloaded from the NI site.
    Regards,
    Shailesh
    Attachments:
    Error_1.JPG ‏83 KB
    Error_2.JPG ‏49 KB
    MDM AOP5 plugin.log ‏783 KB

    Hi Shailesh,
    Is it possible that the computer this worked on has had a newer version of DIAdem or LabVIEW or DataFinder on it?  All three of those NI software packages share a layer called USI, which is what the DataPlugins "plug into".  The USI layer only upgrades, so even if you installed a DIAdem 2012 evaluation version and then uninstalled it, you would keep the USI version from DIAdem 2012, and your DIAdem 11.0 would use that newer USI version.  It is possible that the latest AOP5 DataPlugin is not compatible with 11.0, which was released nearly 5 years ago.  I can look into that and get back to you.
    Alternatively, DIAdem 11.0 may be struggling to work with a USI version from LabVIEW 2012 or DIAdem 2012.  We do regression testing every release with multiple older DIAdem versions, but at some point the newer features don't work with the older software.
    Brad

  • Plugin for binary data: channels with coefficient : y = a3*x^3 + a2*x^2 + a1*x +a0

    Hello,
    I am bulding a plugin for extracting data from a binary file.
    My problem is that the scaling of the values is not defiened by a linear equation (y = a1*x + a0 where conversion is easy with Factor and Offset properties of Channel), but by a cubic equation (y = a3*x^3 + a2*x^2 + a1*x +a0) with 4 coefficients. For the moment, I performed the operation in a loop over all the values of the channel... this takes a lot of time to convert all the values!!! Is there a more efficient way for multiplying array in VBA or channels in DIADem (for Plugins!!!)...?

    Hi Ollac,
    There is no way to efficiently apply polynomial scaling in a DataPlugin.  You could create each of the polynomial component terms with an eMultiplyProcessor type ProcessedChannel in the DataPlugin, but we can't add them together with another ProcessedChannel because you can't add a ProcessedChannel to another ProcessedChannel.  If the manual cell-by-cell scaling that you've already tried is too woefully slow, then I'd suggest exposing the raw data values to channels in the Data Portal and adding the "a0", "a1", "a2", "a3" polynomial coefficients as channel properties.  Once the raw data is in DIAdem, you can use the ChnCalculate() or the older and faster FormulaCalc() command to apply the polynomial scaling in-place based on the coefficients in the channel properties.  You might want the Data Plugin to add the "_Raw" suffix to the channel names and have the scaling VBScript remove the "_Raw" suffix or replace it with a "_Scaled" suffix so you don't accidentally apply the polynomial scaling twice.
    Ask if you have questions about this,
    Brad Turpin
    DIAdem Product Support Engineer
    National Instruments

  • Can we create TDMS file using C# and retrieve the data using a diadem

    I want to write a tdms file from a dot net application and to use the diadem to retrieve the data and to create a user defined report

    Hello,
    If you want this kind of output, you can use Java Mapping e.g
    1. Create your data type like this:
    CHARSET 0..1
    LOADMODE 0..1
    CODEFORMAT 0..1
    CURRENCY 0..1
    SUPPLIERID_DOMAIN 0..1
    ITEMCOUNT 0..1
    TIMESTAMP 0..1
    UNUOM 0..1
    COMMENTS 0..1
    FIELDNAMES 0..1
    DATA 0..unbounded
    ENDOFDATA
    2.In your message mapping assign all the constants. You might want to concat all the values of the FIELDNAMES and output them to DATA
    3.In your Java Mapping, replace all the XML fields including ,, with ,''',
    4.In ID, do not use FCC.
    Hope this helps,
    Mark

  • Have family plan with 250 data which I almost use each month.  Going on vacation and will be on the road for two weeks.  Should I up my data for a month then change back.  Is it worth it or should I just run over and pay the extra 15 per gig?

    have family plan with 250 data which I almost use each month.  Going on vacation and will be on the road for two weeks.  Should I up my data for a month then change back.  Is it worth it or should I just run over and pay the extra 15 per gig?

    Hello mlazaretti. Vacation time is awesome. (Especially a road trip!) Since you will be going out for two weeks, you never know if having extra data may come in handy. I highly recommend switching to the next tier up so this way you have more data. This way it is only $10.00 more versus $15.00, and you dont have to worry about overages. Then change back at the start of the next billing cycle.
    If you need help making this change let us know! Have a safe trip!
    NicandroN_VZW
    Follow us on twitter @VZWSupport

  • Why does my phone use data with cellular data turned off?

    I have problems with my iPhone 5 using data on its own. It usually happens at night, with all the apps closed and plugged in to charge (should be connected to my wifi). Recently, I started turning off my cellular data any time I'm at home out of desperation to save my data. Last night, my phone used 6MB of data with my data off, plugged in. I use My Data Manager to track, it matches up with AT&T's record of my data usage, so I'm pretty sure the app is not wrong. I have the 200MB plan, so I have to be very careful and it's incredibly frustrating to wake up and find 6MB gone when cellular data was turned off. Does anyone know what's going on?  I haven't bothered calling Apple or AT&T, I never get anywhere with either one.

    I'm not familiar with My Data Manager but from the name I would think it would tell you what app or apps have used the data and that might help narrow down the problem. If it doesn't have that information, you can go to Settings > Cellular > Use Cellular Data For and that shows usage by each app and if you click on System Services in that list it will also give details of that usage. The numbers are since you last reset the statistics (bottom of that screen). With a little time and detective work you may be able to identify the cause.
    Also, there have been many discussions on various internet forums of AT&T (and other) reporting of the time of data usage not matching the actual time of the use. The usage numbers over a number of days for example are accurate but usage reported at 2AM may actually be a summary of some types of use that happened the previous day.

  • My gen 3 iPod Touch seems to have duplicated all my music since updating to IOS 5 so that it now only holds half as much. What can I do about it? I'm using the same iTunes library with OS 10.6 and all software up to date.

    My gen 3 iPod Touch seems to have duplicated all my music since updating to IOS 5 so that it now only holds half as much. What can I do about it? I'm using the same iTunes library with OS 10.6 and all software up to date.

    Is the camera damaged? Could be a hardware problem.
    Try:
    Close the Camera app in the multitasking bar, then try again.
    Restart/Reset/Restore your iPod. In that order.

Maybe you are looking for

  • When displaying just One WDiView in the Portal what is the best practice?

    Hi, I´m configuring some Roles to display WebDynpro iViews and I´m concerned because when a page has to display just one iView I don´t create the Page but instead I call the iView directly into the Role and the Displayed iView is viewed correctly, my

  • Mapped drive to other domain on another subnet disconnects

    Hi, I have a strange situation here. Tasked to change/upgrade nearly everything about this companies IT setup. Old servers, old domain name, old switches and some old workstations with XP. I bought all new servers, switches and some new workstations.

  • A scrollable text area

    Hi guys, I have only a question: Doesn't the HAVI API have a scrollable component for text? Haven't I found it? Have I to write this class by my hand? Thanks to all

  • Capture One RAW Tiffs not previewing properly in Aperture

    We just wrapped a big photoshoot and the photographer was using Capture One Pro. He gave me all of the raw files, but Capture creates RAW Tiffs. I imported them all to my Aperture, but now it's only showing me low-res jpeg previews. We switched compu

  • Can't run OCZ PC4200EL at SPD.

    I have 2 512MB OCZ PC4200EL modules.  I can't get them to run at SPD, 2.5-4-4-7 settings with both modules in.  I've tried a multiplier of 8, and FSB of 266, which should keep my processor below stock 2200MHz.  I tried running SuperPi to 4M places, b