Use Of Filter and Drill Down By Option in Context Menu

Hi,
We are on BI 7.0 patch 14.0
I have the Filter and Drill Down by option checked in the context menu Web item in WAD . However when I preview on the Web what happens is that the characteristic that I am using the filter and drill down on shows up horizontally as opposed to in a column.
For eg: If I have the following data initially
01/01/2007     250
02/01/2007    500.
I keep my cursor on 01/01/2007 and do a filter and drill down by 0calqtr then what I see now is
01/2007    02/2007 03/2007 04/2007
instead of
01/2007
02/2007
03/2007
04/2007.
Each CalQtr will have a key figure Value beside it in the horizontal mode.
This happens only when I pick the characteristic on the Graph. On the Web Item Analysis it works fine. Has anyone faced this issue before. This worked fine when it was WAD 3.5. This affects the presentation of the graph. For Objects that have not been migrated the result still shows fine.

Similar Messages

I use to be able to scale down objects highlted in box by clicking any corner holding down mouse and scaling down, that option is gone, is it an error on my settings or has that option been removed I now have to go to menu option click edit, then scale, a

i use to be able to scale down objects highlted in box by clicking any corner holding down mouse and scaling down, that option is gone, is it an error on my settings or has that option been removed I now have to go to menu option click edit, then scale, and then manually have to scale down a percentage.

Copy cat.

Can I navigate and drill down in chart and pivot table?

In the fact, the end user want to navigate to a detail report request when drill down to the final level.
I know when use table, I can navigate on data and drill down on column.
But in chart and "pivot table", I do not find the option of interaction to achieve this.
Any suggestion?

You can drill down in charts but I just saw you can't in pivots (strange because I assumed that that must be possible)
However, you can always use guided navigation!

Rebate agreement-Difference coming for credit note value and drill down value .

Hello Friends,
In 2013 we had created one rebate for which the validity period was 1st April 2013 to 31st March 2014 . At the end of each month, rebate amount was settled by raising credit note to the customer . Now at the end of March'14 during final settlement, a credit note was raised to the customer . The issue here is there is difference of 1.13 (Pounds) between credit note value and the drill down value for March'14 . Lets say our credit note value is-100 (Pounds)and Drill down value for the month March'14 is 101.13 Pounds. We are not able to find out why this difference is coming . Please let me know your inputs on this .
Regards,
Sandeep G.

Sandeep -
During final settlement of a rebate agreement, it calculates rebate amout for the the entire time period less payments already made to a customer and then issues a credit memo request based on that.Please check all the the invoices created during entire period and check accrual calculation.It should match.
You can check VBOX table to get billing documents for the entire period.
Let us know if you still have an issue.
Thanks & Regards
Amit Gupta

What is the difference in Interactive reports and Drill down reports?

What is the difference in Interactive reports and Drill down reports? Are they same?

Hi FRD ,
Both are same .
as far as i know there is no difference .
bye .

Report painter and drill down reports

Hi SAP gurus,
Can any froward configuration of report painter and drill down reports.
iassign points

Hiii Sai Krishna,
can u forward the same documentation to me..plsss
my mail id - [email protected]
thanks in advance
regards
ramki

Wheel of doom spinning before I can log into the pro. Never happened before. The wheel spun a lot when i was using it yesterday and slowed down usage

wheel of doom spinning before I can log into the pro. So signing in was a panic attack in itself.
Never happened before.
The wheel has started to show up spun a lot when i was using it yesterday and slowed down general usage.
what is happening to the mac and what can I do to bring it back to life (before the rainbow wheel of doom)

If this has started happening suddenly without your having made any changes to your configuration, the it's likely that the boot drive is failing, or that there's some other hardware fault. Back up all data immediately, then run the Apple Hardware Test.
Intel-based Macs: Using Apple Hardware Test
Even if the test is negative, you should make a "Genius" appointment at an Apple Store to have the machine tested more thoroughly.

Fire fow will not let me use curtain buttons and drop down menus for web sites. i had version 7.01 and upgraded to verson 8.02b and it did it on both of them. and the web pages work find if i use chrome

Firefox will not let me use curtain buttons and drop down menus for web sites. i had version 7.01 and upgraded to verson 8.02b and it did it on both of them. and the web pages work find if i use chrome

Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 21.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will lose all personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
If you keep having problems then also create a new profile.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Disabling Delete Option in Context Menu

Hi Experts,
I have created a KM Navigational iView for a BO Repositry Folder and used 'BOBJELayout' Layout set for it.
Now in comtext menu i am getting all options like view , history , scheduling , Delete etc.
For administrator it is ok , but for end user, i want to remove or disable particular options like 'Delete'.
How to do it ?
Please help.............
Regards,
Ajay Singh

Hi all,
Thanks for your support
problem is solved to some extent .In my scenario working with BO repository , i was unable to to control the context menu
( though i didn't try RS suggestion yet) from KM but it can be controlled from BO itself.
In context menu Delete option is getting displayed but its not working if user doesn't has sufficient authorization at BO side . So user will not be able to delete any report from his/her login which was the main concern. But How to hide or remove 'Delete' option
from Context menu is still a question.
I am keeping this thread open so that i can revert back with some solution for it or for your's solution.
Thanks & regards
Ajay
Edited by: Ajay Singh on Aug 21, 2009 3:48 PM

Cant See Master Detail Option in context menu.

While doing this Tutorial
http://www.oracle.com/technology/products/jdev/101/tutorials/e2ebcfaces/buildmaster-detailpagewithjdevandadfbc.htm
Creating a Master-Detail JavaServer Faces Page
12. Drag OrdersView2 to the visual editor.
JDeveloper opens a context menu with the available options for that data control.
I Cant See Master Detail Option in context menu.
Can Any one help.

Hi,
I am facing the same problem.
I cant see the item in the popup context menu like here:
[Web Dynpro ABAP and eCatt Testing |https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/media/uuid/e3b19f11-0a01-0010-409d-b3951f754963]

How to add custom option in context menu

Hi,
When viewing a document of a repository, can we add our own option (for example, "View In new Browser") in the context menu? And how can we configure the function when a user clicked on the option of context menu?
Thanks,
Ray

Hi Ray,
   Yes, you are right. This is the assignation chain:
   Command->group commands->resource/collection/details->layout set->folder/KM navigation iview.
   Remember, layout set is a service that you need to active on your repository.
   Layout set allows you define (between other things) commands groups availables for resource, links or folders.
   The context menu will have differents commands group depending reource type.
Patricio.

Remove Resubmit option in context menu of the task in UWL EP7

Hi All
In EP7, the behaviour of the tasks has changed a lot.
when the task appeared in UWL,Clicking on the work items, the form is not getting opened up instead it is showing "Resubmit" option in context menu of the task.
For each task i need the corresponding iView to get opened up. This is how I have configured our uwl.webflow.<system_alias>.xml
How can we remove the Resubmit button and open the form for manager to submit?
I need to revert back to original functionality.
Points will be rewarded
Regards
Sonal Mangla
Message was edited by:
Sonal Mangla

Have you looked at this:
http://help.sap.com/saphelp_nw2004s/helpdata/en/09/6d6b17b29b4eef83a553acaa52f668/frameset.htm
Paul

Table Data Preview tab: Missing Filter Textbox + Drill Down Data Discovery

1 - With Oracle based tables, when I click them and the table preview loads with all the tabs, on the Data tab there is a Preview entry box. I do not see the same with SQL Server or MySQL based connections. Is there a way to enable it? Am I not looking hard enough or is this function only available for Oracle based tables?
2 - I'm having a hard time trying to search for an answer to this next question (too many false positives based on the terms I am using). In other tools I have used (namely DB Visualizer), when previewing data in the Table's Data tab, a user may 'drill down' through values by right-clicking the field and applying a filter from the pop-up (drop-down with the field names, usual SQL comparison operators and a text entry box). I see SQL Developer has something similar with a filter list, but it only seems to prompt values in the buffer (in order, no less) and only uses the = operator (no LIKE). Finally, I notice that this value is not even present in the Filter text box (if you wanted to edit it further, add more, etc). As with my prior question, am I missing some usability/functionality setting/config or does this feature simply not exist in the way the other tool employed it? This feature is what keeps the other tool installed on my machine.

Hi Jed,
1) Sorry, the tool just has fewer bells and whistles for non-Oracle database connections. You might try adding this as a feature request on SQL Developer Exchange.
2) The normal SQL operators such as LIKE, <, and so on, are supported for the individual column filters, but there are some quirks:
Re: Bug - column filter doesn't work in 3.1.05
Regards,
Gary
SQL Developer Team

First Page is Table and drill down page is chart

Hi All,
In my dashboard i should display only table. In table, if i select one drill down values. It should display only chart not for table formate.
How to set this option.
First page it sholuld be table
Drill down page should be chart
How will do this.
Thanks

Hi,
Create two reports one with table and other with chart in compound layout view.Place Table in one page and to to column properties->data format->value interaction->navigation->select chart report that you created under column through which you want to navigate to chart.Make that column as prompted in chart if you want to filter data based on column selected.
Regards,
Srikanth
http://bintelligencegroup.wordpress.com/

Reporting Services Error after Interactive sorting and drill down in pps

Hi
i have a report that has a drill down option that shows all workgroups within a specific parent group and an interactive sorting ass well on both columns parent group & workgroup
This is displayed in pps combined with a SharePoint
---the problem is that after sorting the parent group column by name i then press the drill through icon (+) next to it hopping to see all workgroups related to each parent group
- but instead
i receive this Reporting Services Error :
The value for parameter 'SortItem' is not specified. It is either missing from the function call, or it is set to null. (rsMissingParameter) Get
Online Help
If I don't press the sorting and just drill through it works fine. the sorting itself also works fine.
any suggestions ?

Hi Hyaron,
I am unable to reproduce the issue in my test environment. How did you add the drilldown feature? Were you doing that by setting visibility of the column or of the group? Please ensure to add the drilldown functionality by set the visibility of the workgroup
from the Grouping Pane in the Report Designer.
How did you add the Interactive Sorting on the headers of the two columns? Based on the drilldown functionality, the Interactive Sorting on the second column doesn’t work. So, you can move the Interactive Sorting on the second column. When configuring the
Interactive sorting on the first column, you should set the parent group to sort, and sort by the field that the parent group groups by.
Hope this helps.
Regards,
Mike Yin
TechNet Community Support

Use Of Filter and Drill Down By Option in Context Menu

Similar Messages

Maybe you are looking for