Use of Lotus LDAP server for WLP 7 - LDAP experts ?
Hi,
I'm looking for someone who has used the Lotus LDAP server for WLP7
authentication.
I connect my portal to the Domino LDAP, User and Groups are working
fine, but the membership of a user to a group is not.
I assume that it's related to the parameters I use (especially the
membership.filter ?):
"user.filter=(&(uid=%u)(objectclass=person));
user.dn=O=Apac;
membership.filter=(&(uniquemember=%M)(objectclass=groupOfNames));
group.filter=(&(cn=%g)(objectclass=groupOfNames));
server.host=jpgal01.apac.bea.com;
group.dn="
Any help would be appreciate, because I just don't where to look for.
JP
"JP" <[email protected]> wrote in message news:[email protected]..
Hi,
I'm looking for someone who has used the Lotus LDAP server for WLP7
authentication.
I connect my portal to the Domino LDAP, User and Groups are working
fine, but the membership of a user to a group is not.
I assume that it's related to the parameters I use (especially the
membership.filter ?):
"user.filter=(&(uid=%u)(objectclass=person));
user.dn=O=Apac;
membership.filter=(&(uniquemember=%M)(objectclass=groupOfNames));
group.filter=(&(cn=%g)(objectclass=groupOfNames));
server.host=jpgal01.apac.bea.com;
group.dn="
Any help would be appreciate, because I just don't where to look for.
Try setting the com.netscape.ldap.trace property.
\* When -D command line option is used, defining the property with
* no value will send the trace output to the standard error. If the
* value is defined, it is assumed to be the name of an output file.
* If the file name is prefixed with a '+' character, the file is
* opened in append mode.
This will create a ldap trace file of the requests that WLS is making on the
LDAP server. You can then see
where the filters are not returning the correct value for the group
membership.
Similar Messages
-
Use of Lotus LDAP server for WLP 7 - LDAP experts required
Hi,
I'm looking for someone who has used the Lotus LDAP server for WLP7
authentication.
User and Groups are working fine, the membership of a user to a group is
not.
I assume that it's related to the parameters I use (especially the
membership.filter ?):
user.filter=(&(uid=%u)(objectclass=person));
user.dn=O=Apac;
membership.filter=(&(uniquemember=%M)(objectclass=groupOfNames));
group.filter=(&(cn=%g)(objectclass=groupOfNames));
server.host=jpgal01.apac.bea.com;
group.dn=
I know that this LDAP server supported, but id it could work at least
for some time, that would be great !
thanks for your help,
JP"JP" <[email protected]> wrote in message news:[email protected]..
Hi,
I'm looking for someone who has used the Lotus LDAP server for WLP7
authentication.
I connect my portal to the Domino LDAP, User and Groups are working
fine, but the membership of a user to a group is not.
I assume that it's related to the parameters I use (especially the
membership.filter ?):
"user.filter=(&(uid=%u)(objectclass=person));
user.dn=O=Apac;
membership.filter=(&(uniquemember=%M)(objectclass=groupOfNames));
group.filter=(&(cn=%g)(objectclass=groupOfNames));
server.host=jpgal01.apac.bea.com;
group.dn="
Any help would be appreciate, because I just don't where to look for.
Try setting the com.netscape.ldap.trace property.
\* When -D command line option is used, defining the property with
* no value will send the trace output to the standard error. If the
* value is defined, it is assumed to be the name of an output file.
* If the file name is prefixed with a '+' character, the file is
* opened in append mode.
This will create a ldap trace file of the requests that WLS is making on the
LDAP server. You can then see
where the filters are not returning the correct value for the group
membership. -
Using external LDAP server for WL JNDI lookups
I'm trying to find out if it is possible to re-direct JNDI calls to the WL
server to an external LDAP server. I know you can install an external LDAP
server for security purposes, but I would like to use an external LDAP
server to handle all JNDI lookups (like for JNDI EJB name location, etc.).
Is this possible?You typically need to use our JNDI store. We strongly recommend this for
performance reasons..
You can use the JNDI To LDAP bridge which is available from the sun web
site.
Michael Girdley
BEA Systems Inc
"Jack Archer" <[email protected]> wrote in message
news:[email protected]..
I'm trying to find out if it is possible to re-direct JNDI calls to the WL
server to an external LDAP server. I know you can install an external LDAP
server for security purposes, but I would like to use an external LDAP
server to handle all JNDI lookups (like for JNDI EJB name location, etc.).
Is this possible? -
Free (java-based) LDAP server for Windows
Hello,
I am experimenting with JNDI. Can anyone tell me if there is a free LDAP server for Windows that I could use to run JNDI examples.
Thanks in advance,
Balteo.Attached is may slapd.conf file I used while I was working through the JNDI tutorial. You can find any comments in the original config file - I deleted them in the attachment.
Do not forget to create the directory 'openldap-ldbm' manually in the apropriate place as defined in the config file.
cu, Adrian
slapd.conf
# $OpenLDAP: pkg/ldap/servers/slapd/slapd.conf,v 1.8.8.7 2001/09/27 20:00:31 kurt Exp $
# See slapd.conf(5) for details on configuration options.
# This file should NOT be world readable.
#include %SYSCONFDIR%/schema/core.schema
include d:/OpenLDAP/schema/core.schema
include d:/OpenLDAP/schema/java.schema
include d:/OpenLDAP/schema/krb5-kdc.schema
pidfile d:/OpenLDAP/slapd.pid
argsfile d:/OpenLDAP/slapd.args
database ldbm
suffix "o=JNDITutorial"
rootdn "cn=Manager,o=JNDITutorial"
rootpw changeit
#directory %LOCALSTATEDIR%/openldap-ldbm
directory d:/OpenLDAP/openldap-ldbm
index objectClass eq -
Free LDAP server for Win32 to play?
Hi.. anybody know free LDAP server for Win32?
Thanks!I found this:
http://www.eudora.com/free/ldap.html
Looks like you'll have to compile it yourself, though.
Actually, can't you access the Windows 2000 Active Directory through LDAP as well?
.P. -
Where can I find an LDAP Editory for Open LDAP
where can I find an LDAP Editory for Open LDAP... i was using LDAP Editor but it does seem to work any more... where can I find a free download for the LDAP editor for windows...
I put in the following info in the connection section for the
lDAPbrowser but am not able to connect to the server. I get error
saying Failed to connect to ldap://165.252.58.78:389/
Host: 165.252.58.78
Port: 389
Version: 3
Base DN: what do I put here
and do I select SSL
or Anoymous bind
User Info
User DN: what do I put here
and
I am connecting to ldap through my app with the following criteria:
url=ldap://165.252.58.78:389/
ldapHost=165.252.58.78
ldapPort=389
ldapVersion=LDAPConnection.LDAP_V3
ldaploginDN=cn=Manager,dc=accuserverx,dc=com
ldappassword=password -
Using a single Content server for DMS and also for Archive link documents
Hi,
We have Planned for a single content server for managing the documents in DMS, parallelly as DMS Standard SAP objects are not available for all SAP transactions, i have proposed for making use of SAP Archivelink funtionality to maintain the documentations where Std SAP DMS does not provide a Solution.
so here the question is
can a single content server be used as a content repository for Both DMS and archivelink,
can any one having done this pls state if it is possible to create different or Many Content repositories for DMS, Archive link in the same server,
is this a virtual creation or can we assign each repository a specific storage space which it should not exceed.
Thanks and regards
SathishHi sathish,
-- Through the ArchiveLink docuemnt Management interface, an SAP sytem can use various content servers as storage media. similarly, one contnent server can be used by multiple SAP systems.
-- A Content server always has a single database assigned to it. A database can therefore be used by only one content server.
-- A databse is split into as many repositories as necessary. The design of the repository is mapped in the SAP system.A repository contains documents.
Depending on your requirements,(if u have limited documents or with low requirements) you can use the same content server for both DMS and Archivelink.
The number of documents stored on the content server is limited only by the size of the database.
Its better to have an external content server for archiving purpose, if your database size is increasing. Since the archiving systems storage is not dependent on the database.
U can also refer to the below thread :
How to Archive SAP DMS Data?
hope this helps....
regards
kavitha -
Re: Using already running Tomcat server for development.
Hi Nick,
Yes, you can use existing Tomcat Server for debugging app developed with
NitroX. And you can refer to Help > Help Contents > NitroX User Guide >
NitroX Tour > Running and debugging the application.
We do support Tomcat 4.0.x to Tomcat 5.0.x. If you need any further
assistance please get back to us.
Thanks
M7 Support
"Nick Mulder" <[email protected]> wrote in message
news:41d9f379$[email protected]..
Sorry if this has been covered anywhere else.Just wondering if you can use an existing tomcat server for debugging
webapps being developed in NitroX. I have a non dedicated server a
development server. Up until purchasing NitroX I have been using ant build
files to compile and re-deploy my apps into the running tomcat server.
Just wondering if I can do something similar thru NitroX and Eclipse.
Forgive me if I am missing something obvious, but I am new to eclipse.
Thanks,
Nick MulderTake a look at these links: http://plato.acadiau.ca/courses/comp/dsilver/2513/EclipseAndTomcatTutorial/
http://www.keyboardsamurais.de/2004/01/15/tomcat_tutorial_helloworld_for_complete_fools_-_english/
http://www-128.ibm.com/developerworks/opensource/library/os-ectom/?ca=dgr-lnxw16EclipsTomcat
I've found going through tutorials is a proven, quick way of getting up to speed with new tools and configurations.
HTH,
James -
Using already running Tomcat server for development.
Sorry if this has been covered anywhere else.
Just wondering if you can use an existing tomcat server for debugging
webapps being developed in NitroX. I have a non dedicated server a
development server. Up until purchasing NitroX I have been using ant build
files to compile and re-deploy my apps into the running tomcat server. Just
wondering if I can do something similar thru NitroX and Eclipse. Forgive me
if I am missing something obvious, but I am new to eclipse.
Thanks,
Nick MulderTake a look at these links: http://plato.acadiau.ca/courses/comp/dsilver/2513/EclipseAndTomcatTutorial/
http://www.keyboardsamurais.de/2004/01/15/tomcat_tutorial_helloworld_for_complete_fools_-_english/
http://www-128.ibm.com/developerworks/opensource/library/os-ectom/?ca=dgr-lnxw16EclipsTomcat
I've found going through tutorials is a proven, quick way of getting up to speed with new tools and configurations.
HTH,
James -
IPhoto 11 (9.2.1) can't use iCloud Mail smtp server for email.
iPhoto 11 (9.2.1) can't use iCloud Mail smtp server for email. "The email server didn't recognise username/password combination". Both appear correct in preferences/accounts. Mail sends and receives messages perfectly.
(This problem also occurs when trying to send from Thunderbird, however both iPhoto and Thunderbird can send perfectly well using the Gmail server).Hi there
I should explain that I have 5 days experience of the iMac but have had a working iCloud account with my iPad for several months. I don't think this is an iCloud issue as such. My thought is that this is something to do with the Mail application itself and its relationship to my Apple ID etc. (Perhaps when the iMac first configured itself?)
I have deleted and manually reset both Mail and iPhone account settings for iCloud using the Apple recommended settings and I have tentatively checked that the username/password combination is as expected in Keychain but I'm too much of an Apple novice to go any further with that.
On a PC I think I would try reinstalling the Mail programme but I don't see that as an option. -
Using BT Mail smtp server for non-bt account
Having recently discovered the hard way that I was migrated (and had no BT e-mail for 3 days), I have now discovered that all the authorisations I had set up for sending of e-mail fwith the senders address being a non-bt account have gone.
The help files point me in the direction of setting up BT Mail to get non-bt mail for me. This is not what I want. All I need is to authorize andrew@******.org.uk as an authorised user on my BT account. Thunderbird is quite capable of getting the mail from mail.****.org.uk with POP3. I just need to be able to use the BT smtp server for outgoing mail only.
Help Please
Andrew Johnson
Solved!
Go to Solution.Appears to be working again with andrew@******.org.uk
I guess it was just a glitch. -
Using CUCM as LDAP Server for Jabber Phone
Hi All,
I have CUCM 9.1 and Jabber 9.1 for android, I want to configure the Directory search with CUCM as LDAP server, when all the End User automatically added to directory search on the Jabber because we don't have any ldap server, but until now I always got Directory status Disconnected or Error.
Thing that I"ve done :
1. Cofigure the LDAP server on phone configuration with CUCM ip address.
2. FIll the Username and Password with CUCM Username and Password. (don't work)
3. Create new Application User with AXL API Access that used to be the LDAP Username and password (don't work)
does anyone have done this?or the connection with another LDAP Server is mandatory for jabber application? becaus I know some 3rd party application that can done this.
please help me with this problem, any help or comment will be grateful
Regards,
YopieUDS does not work with Jabber for Android, you do need an LDAP
Requirements for Integration with Corporate Directory (Optional)
Use one of the following for Lightweight Directory Access Protocol (LDAP):
Microsoft Active Directory 2003
Microsoft Active Directory 2008
Open LDAP
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/jabber/Android/9_1/JABA_BK_J0D6CD65_00_jabber-android-release-notes-9-1-1.html
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk -
Error=49 from the LDAP server for GSSAPI Kerberos authentication
I am trying to find solution for ldapsearch failure with GSSAPI Kerberos authentication . I am running Sun Directory Server 5.2 P4 on a Solaris-9 sparc machine..
Steps :
bash-2.05# kinit tester1
Password for [email protected]:
bash-2.05#
When I do ldapsearch , I am getting following logs on the server :
tail -f /var/Sun/mps/slapd-bf1r-dsun-1/logs/access
[22/Feb/2007:01:44:16 -0700] conn=32 op=-1 msgId=-1 - fd=26 slot=26 LDAP connection from 10.7.30.185 to 10.7.30.16
[22/Feb/2007:01:44:16 -0700] conn=32 op=0 msgId=1 - BIND dn="uid=tester1,ou=people,dc=test1,dc=com" method=sasl version=3 mech=GSSAPI
[22/Feb/2007:01:44:16 -0700] conn=32 op=0 msgId=1 - RESULT err=14 tag=97 nentries=0 etime=0, SASL bind in progress
[22/Feb/2007:01:44:16 -0700] conn=32 op=1 msgId=2 - BIND dn="uid=tester1,ou=people,dc=test1,dc=com" method=sasl version=3 mech=GSSAPI
[22/Feb/2007:01:44:16 -0700] conn=32 op=1 msgId=2 - RESULT err=14 tag=97 nentries=0 etime=0, SASL bind in progress
[22/Feb/2007:01:44:16 -0700] conn=32 op=2 msgId=3 - BIND dn="uid=tester1,ou=people,dc=test1,dc=com" method=sasl version=3 mech=GSSAPI
[22/Feb/2007:01:44:16 -0700] conn=32 op=2 msgId=3 - RESULT err=49 tag=97 nentries=0 etime=0
[22/Feb/2007:01:44:16 -0700] conn=32 op=3 msgId=4 - UNBIND
[22/Feb/2007:01:44:16 -0700] conn=32 op=3 msgId=-1 - closing - U1
[22/Feb/2007:01:44:17 -0700] conn=32 op=-1 msgId=-1 - closed.
[22/Feb/2007:01:45:50 -0700] conn=33 op=-1 msgId=-1 - fd=26 slot=26 LDAP connection from 10.7.30.185 to 10.7.30.16
[22/Feb/2007:01:45:50 -0700] conn=33 op=0 msgId=1 - BIND dn="uid=tester1,ou=people,dc=test1,dc=com" method=sasl version=3 mech=GSSAPI
[22/Feb/2007:01:45:50 -0700] conn=33 op=0 msgId=1 - RESULT err=14 tag=97 nentries=0 etime=0, SASL bind in progress
[22/Feb/2007:01:45:50 -0700] conn=33 op=1 msgId=2 - BIND dn="uid=tester1,ou=people,dc=test1,dc=com" method=sasl version=3 mech=GSSAPI
[22/Feb/2007:01:45:50 -0700] conn=33 op=1 msgId=2 - RESULT err=14 tag=97 nentries=0 etime=0, SASL bind in progress
[22/Feb/2007:01:45:50 -0700] conn=33 op=2 msgId=3 - BIND dn="uid=tester1,ou=people,dc=test1,dc=com" method=sasl version=3 mech=GSSAPI
[22/Feb/2007:01:45:50 -0700] conn=33 op=2 msgId=3 - RESULT err=49 tag=97 nentries=0 etime=0
[22/Feb/2007:01:45:50 -0700] conn=33 op=3 msgId=4 - UNBIND
[22/Feb/2007:01:45:50 -0700] conn=33 op=3 msgId=-1 - closing - U1
[22/Feb/2007:01:45:51 -0700] conn=33 op=-1 msgId=-1 - closed.
I am using default Identiy Mapping and the ldif file looks like this :
dn: cn=default,cn=GSSAPI,cn=identity mapping,cn=config
objectClass: dsIdentityMapping
objectClass: nsContainer
objectClass: dsPatternMatching
objectClass: top
cn: default
dsMatching-pattern: ${Principal}
creatorsName: cn=directory manager
createTimestamp: 20070220045812Z
dsMatching-regexp: uid=(.*)
dsSearchBaseDN: ou=people,dc=test1,dc=com
dsMappedDN: uid=${Principal},ou=people,dc=test1,dc=com
modifiersName: uid=admin,ou=administrators,ou=topologymanagement,o=netscaperoo
t
modifyTimestamp: 20070221082740Z
Following is the snoop for LDAP on the server :
bash-2.05# !snoop
snoop -v port 389 | grep LDAP
Using device /dev/eri (promiscuous mode)
TCP: Destination port = 389 (LDAP)
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
TCP: Destination port = 389 (LDAP)
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
TCP: Destination port = 389 (LDAP)
LDAP: ----- Lightweight Directory Access Protocol Header -----
LDAP: *[LDAPMessage]
LDAP: [Message ID]
LDAP: Operation *[APPL 0: Bind Request]
LDAP: [Version]
LDAP: [Object Name]
LDAP: uid=tester1,ou=people,dc=test1,d
LDAP: c=com
LDAP: Authentication: SASL *[3]
LDAP: [OctetString]
LDAP: GSSAPI
LDAP: [OctetString]
LDAP: *** NOT PRINTED - Too long value ***
LDAP:
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
LDAP: ----- Lightweight Directory Access Protocol Header -----
LDAP: *[LDAPMessage]
LDAP: [Message ID]
LDAP: Operation *[APPL 1: Bind Response]
LDAP: [Result Code]
LDAP: SASL Bind In Progress
LDAP: [Matched DN]
LDAP: [Error Message]
LDAP: SASL Credentials [7]
LDAP:
TCP: Destination port = 389 (LDAP)
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
TCP: Destination port = 389 (LDAP)
LDAP: ----- Lightweight Directory Access Protocol Header -----
LDAP: *[LDAPMessage]
LDAP: [Message ID]
LDAP: Operation *[APPL 0: Bind Request]
LDAP: [Version]
LDAP: [Object Name]
LDAP: uid=tester1,ou=people,dc=test1,d
LDAP: c=com
LDAP: Authentication: SASL *[3]
LDAP: [OctetString]
LDAP: GSSAPI
LDAP:
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
LDAP: ----- Lightweight Directory Access Protocol Header -----
LDAP: *[LDAPMessage]
LDAP: [Message ID]
LDAP: Operation *[APPL 1: Bind Response]
LDAP: [Result Code]
LDAP: SASL Bind In Progress
LDAP: [Matched DN]
LDAP: [Error Message]
LDAP: SASL Credentials [7]
LDAP:
TCP: Destination port = 389 (LDAP)
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
TCP: Destination port = 389 (LDAP)
LDAP: ----- Lightweight Directory Access Protocol Header -----
LDAP: *[LDAPMessage]
LDAP: [Message ID]
LDAP: Operation *[APPL 0: Bind Request]
LDAP: [Version]
LDAP: [Object Name]
LDAP: uid=tester1,ou=people,dc=test1,d
LDAP: c=com
LDAP: Authentication: SASL *[3]
LDAP: [OctetString]
LDAP: GSSAPI
LDAP: [OctetString]
LDAP:
LDAP: ----- Lightweight Directory Access Protocol Header -----
LDAP: *[LDAPMessage]
LDAP: [Message ID]
LDAP: Operation *[APPL 1: Bind Response]
LDAP: [Result Code]
LDAP: 1
LDAP: Invalid Credentials
LDAP: [Matched DN]
LDAP: [Error Message]
LDAP: SASL(-1): generic failure:
LDAP:
TCP: Destination port = 389 (LDAP)
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
TCP: Destination port = 389 (LDAP)
LDAP: ----- Lightweight Directory Access Protocol Header -----
LDAP: *[LDAPMessage]
LDAP: [Message ID]
LDAP: Operation [APPL 2: Unbind Request]
LDAP:
TCP: Destination port = 389 (LDAP)
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
TCP: Destination port = 389 (LDAP)
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
Please help me on how to fix this issue.
Thanks,
RadhakrishnanI did reply on the other thread of yours...
Ludovic -
Authentication problem by external ldap server for WLS 7.0
Hi all,
I have configured iPlanet directory Server to serve as authentication security
provider for WLS 7.0.While doing so I have created a Test security realm and made
it as default.I have also configured the other default settings for the remaining
security providers for the realm.
Now, while I start the WLS with the default username and password, boot-error
comes as given below. As a matter of fact I have also created groups with relevant
username and pwd in the ldap server as specified bu the Bea documentation.
I have tried to remove the problem since last 4 days but all in fiasco.
If anybody has any pointer to the problem - it will be a great help.
The error :
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://[hostname]:[port]/console *
D:\bea\weblogic700\samples\server\config\petstore>"D:\bea\jdk131_03\bin\java"
-h
otspot -Xms32m -Xmx200m -Dpet.mode= - Dweblogic.management.discover=false -Dweblo
gic.Name=petstoreServer -Dbea.home="D:\bea" -Dweblogic.management.username=weblo
gic -Dweblogic.management.password=weblogic -Dweblogic.ProductionModeEnabled=tru
e -Djava.security.manager -Djava.security.policy=="D:\bea\weblogic700\server\lib
\weblogic.policy" weblogic.Server
Starting WebLogic Server...
<Nov 19, 2002 10:08:04 AM IST> <Notice> <Management> <140005> <Loading configura
tion D:\bea\weblogic700\samples\server\config\petstore\.\config.xml>
<Nov 19, 2002 10:08:21 AM IST> <Notice> <Security> <090082> <Security initializi
ng using realm RitTestRealm.>
<Nov 19, 2002 10:08:22 AM IST> <Critical> <WebLogicServer> <000364> <Server fail
ed during initialization. Exception:java.lang.SecurityException: User weblogic
i
s not permitted to boot the server
java.lang.SecurityException: User weblogic is not permitted to boot the server
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:1076)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1116)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)
>
Regards,
RitwikThanks Vijay - it has worked by creating the Administrator group in LDAP but Weblogic
documentation also states the creation of any group in Ldap server with the boot
username and pwd and then adding the group in the admin role of WLS7.0 - but this
did not work.
If there is any info regarding the same - pl. do let me know
Regards,
Ritwik
"Vijay" <[email protected]> wrote:
>
Ritwik,
I think WebLogic 7 requires a group called "Administrators" in the LDAP
server
and requires an user to be added to that group. I have this working in
one of
my projects. The group really doesnt need to be an LDAP administrative
group.
Can you provide any additional information. I might be able to help since
I got
this working only a coupla days back.
Vijay
"Ritwik Batabyal" <[email protected]> wrote:
Hi all,
I have configured iPlanet directory Server to serve as authentication
security
provider for WLS 7.0.While doing so I have created a Test security realm
and made
it as default.I have also configured the other default settings forthe
remaining
security providers for the realm.
Now, while I start the WLS with the default username and password, boot-error
comes as given below. As a matter of fact I have also created groups
with relevant
username and pwd in the ldap server as specified bu the Bea documentation.
I have tried to remove the problem since last 4 days but all in fiasco.
If anybody has any pointer to the problem - it will be a great help.
The error :
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://[hostname]:[port]/console *
D:\bea\weblogic700\samples\server\config\petstore>"D:\bea\jdk131_03\bin\java"
-h
otspot -Xms32m -Xmx200m -Dpet.mode= - Dweblogic.management.discover=false
-Dweblo
gic.Name=petstoreServer -Dbea.home="D:\bea" -Dweblogic.management.username=weblo
gic -Dweblogic.management.password=weblogic -Dweblogic.ProductionModeEnabled=tru
e -Djava.security.manager -Djava.security.policy=="D:\bea\weblogic700\server\lib
\weblogic.policy" weblogic.Server
Starting WebLogic Server...
<Nov 19, 2002 10:08:04 AM IST> <Notice> <Management> <140005> <Loading
configura
tion D:\bea\weblogic700\samples\server\config\petstore\.\config.xml>
<Nov 19, 2002 10:08:21 AM IST> <Notice> <Security> <090082> <Security
initializi
ng using realm RitTestRealm.>
<Nov 19, 2002 10:08:22 AM IST> <Critical> <WebLogicServer> <000364><Server
fail
ed during initialization. Exception:java.lang.SecurityException: User
weblogic
i
s not permitted to boot the server
java.lang.SecurityException: User weblogic is not permitted to bootthe
server
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:1076)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1116)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)
>
Regards,
Ritwik -
Need help setting up LDAP server for Address Book
I've set up Panther servers before for AFP which is pretty simple but now the office I work at wants me to setup an LDAP server so they can share the same contact information, probably about 2,000+ entries. I'm guessing that this will have to be entered in the LDAP server entry by entry.
I need to know how to setup the server and what settings need to be on the clients' computers, such as in Address Book.
The server is an older G4 tower and I've got 8 computers hooked up to it on a simple network. I don't think I'll need to make the LDAP server accessible from outside the network but it's something I'll have to worry about for the future.
Thanks for any help you can offer.bump
Maybe you are looking for
-
Hi, i got a serious problem and i need help. Sometimes when i'm using my mac, it appears a very thin purple line! And in a randomly space of time it disapears. My first thought was like "OMG! Calm down... maybe that's broken pixels." So i used a widg
-
What are the username and password when i click the ICM of JavaEE5@SAP
when i click the ICM of JavaEE5@SAP in the sapmanagement console mmc, It need i input the username and password for Web_admin, What are the username and password when i click the ICM of JavaEE5@SAP and which tools act the role as the VisualAdministra
-
If I use include-xsql to include an xml-fragment stored in a clob from the db and in the included xsql I use a stylesheet with disable-output-escaping so that I can treat the clob contents as real xml when included and the clob inlcudes non-8859 char
-
Keyboard shortcut from type tool to move tool
What is the keyboard shortcut again from the type tool to the move tool?
-
Can't download pages , numbers and keynote
Hi , I had a problem with my apps pages , numbers and keynote. My MBP showed me that i had to update pages , number and keynote , but i couldn't. I tryed many things to solve it but nothing worked , soo i tryed to deleted them so that i maybe could r