Free (java-based) LDAP server for Windows
Hello,
I am experimenting with JNDI. Can anyone tell me if there is a free LDAP server for Windows that I could use to run JNDI examples.
Thanks in advance,
Balteo.
Attached is may slapd.conf file I used while I was working through the JNDI tutorial. You can find any comments in the original config file - I deleted them in the attachment.
Do not forget to create the directory 'openldap-ldbm' manually in the apropriate place as defined in the config file.
cu, Adrian
slapd.conf
# $OpenLDAP: pkg/ldap/servers/slapd/slapd.conf,v 1.8.8.7 2001/09/27 20:00:31 kurt Exp $
# See slapd.conf(5) for details on configuration options.
# This file should NOT be world readable.
#include %SYSCONFDIR%/schema/core.schema
include d:/OpenLDAP/schema/core.schema
include d:/OpenLDAP/schema/java.schema
include d:/OpenLDAP/schema/krb5-kdc.schema
pidfile d:/OpenLDAP/slapd.pid
argsfile d:/OpenLDAP/slapd.args
database ldbm
suffix "o=JNDITutorial"
rootdn "cn=Manager,o=JNDITutorial"
rootpw changeit
#directory %LOCALSTATEDIR%/openldap-ldbm
directory d:/OpenLDAP/openldap-ldbm
index objectClass eq
Similar Messages
-
Sun Java System Messaging Server for Windows xp
Hi,
We are in a project that uses Sun Java System Messaging Server on Windows xp platform. But we didn't find the software download.
Please tell how can i have that software?Messaging Server 6.x has never been released for Windows. A windows release is projected for the future, but that may be months away.
Messaing 6.1 is available NOW for Redhat Linux AS2.1 u2 and Solaris X86. I have installed both, and find them both good. -
Download Sun Java System Portal Server for Windows
Can anybody send me URL for th same?
Currently you can only obtain Portal Server from JES 2005Q1 for windows.
http://www.sun.com/download/sdl.jsp?71220fd6=1
JES 2005Q4 for windows is not out yet -
Where can I download the pure java edition app server for windows
Where can I download a copy of the uncertified windows version of the app server listed below?
OracleAS Java Edition v9.0.4
Oracle HTTP Server
OracleAS Containers for J2EE
Oracle Enterprise Manager
OracleAS TopLink
Oracle JDeveloper
Currently certified: Solaris, HP, Linux
(I am not interested in the 10.0.3 preview version of the app server)
I went to the Production release download area for the Application Server and they only let you download the Certified version of this SW which is for Linux, HP, and Linux.
I went to the Pre-release download area and they only have the 10.0.3 preview versions listed for download.
We want to install the above-mentioned version of an intel box running Windows for our integration point and we have linux boxes setup for production. We would like to use the same version of the app servers on all 3.
Any ideas out there?Go into
Applications / Utilities / Java Preferences.app
and make sure you have the 'Enabled' boxes checked for both 64 and 32-bit.
Finally, in
Safari > Preferences | Security
make sure the 'Enable Java' box is checked.
Message was edited by: softwater -
Free LDAP server for Win32 to play?
Hi.. anybody know free LDAP server for Win32?
Thanks!I found this:
http://www.eudora.com/free/ldap.html
Looks like you'll have to compile it yourself, though.
Actually, can't you access the Windows 2000 Active Directory through LDAP as well?
.P. -
What is happening about Java System Identity Synchronization for Windows
I have been playing with "Java System Identity Synchronization for Windows" for a while now. I am about to swich over to is 100%, but I am worried that the latest version is "Windows 1 2004Q3".
Has any one got any ideas about this. The product sort of works, and is much smaller that going for the whole "Java System Identity Management Suite 2005Q4" which is way to big and complicated for our and I think many people.
Don't forget Microsoft have now release its own tools to do this in the latest Windows 2003 SP.
AndrewISW is already present in the 5.2p4 and 5.2p6 archives.
dn: cn=pswsync,cn=plugins,cn=config
objectClass: top
objectClass: nsSlapdPlugin
objectClass: ds-signedPlugin
objectClass: extensibleObject
cn: pswsync
nsslapd-pluginPath: /export/home/abc/local/ds52p6/lib/psw-plugin.so
nsslapd-pluginInitfunc: pswsync_init
nsslapd-pluginType: preoperation
nsslapd-pluginEnabled: off
creatorsName: cn=server,cn=plugins,cn=config
modifiersName: cn=server,cn=plugins,cn=config
createTimestamp: 20090121011643Z
modifyTimestamp: 20090121011643Z
nsslapd-pluginId: Identity Sync for Windows
nsslapd-pluginVersion: 5.2_Patch_6
nsslapd-pluginVendor: Sun Microsystems, Inc.
nsslapd-pluginDescription: Identity Synchronization for Windows Plug-In -
Unable to download Sun Java System Identity Synchronization for Windows
Please any one can help me How can i download Sun Java System Identity Synchronization for Windows
* Sun Java System Directory Server ---------------------able to download
* Sun Java System Directory Proxy Server --------------able to download
* Sun Java System Identity Synchronization for Windows-------------Not able to download
* Sun Java System Directory Editor------------------------able to download
* Sun Java System Directory Server Resource Kit------able to download
Regards
kamalISW is already present in the 5.2p4 and 5.2p6 archives.
dn: cn=pswsync,cn=plugins,cn=config
objectClass: top
objectClass: nsSlapdPlugin
objectClass: ds-signedPlugin
objectClass: extensibleObject
cn: pswsync
nsslapd-pluginPath: /export/home/abc/local/ds52p6/lib/psw-plugin.so
nsslapd-pluginInitfunc: pswsync_init
nsslapd-pluginType: preoperation
nsslapd-pluginEnabled: off
creatorsName: cn=server,cn=plugins,cn=config
modifiersName: cn=server,cn=plugins,cn=config
createTimestamp: 20090121011643Z
modifyTimestamp: 20090121011643Z
nsslapd-pluginId: Identity Sync for Windows
nsslapd-pluginVersion: 5.2_Patch_6
nsslapd-pluginVendor: Sun Microsystems, Inc.
nsslapd-pluginDescription: Identity Synchronization for Windows Plug-In -
Mail Server for windows...
Is there any free mail server for windows that i could use to send emails from my application..
Its just that I have been trying the JavaMail Api and having no luck, despite help from some of you.
And my deadline is closing in and I am no closer to the solution...
There has to be a fast and simple way to send a simple email automatically...anyone know it?
pleaseeee help........I am in college and can use the mail server here no problem...its name is "gabriel.ul.ie", anyone know have any sample code for sending mail, and i could try this with this mailhost...
-
Sun Java System Application Server for Mac OS X ?
hi everybody.
does anybody know if (any given date ?) sun is planning to offer a distribution of its sun java system application server for mac os x ? or even better: any ideas on how to install a currently available version on mac os x 10.4 ? the linux bin seems not to be readable.
thank you very much in advance, folks.
and have a nice day
andre from berlin, germanyAs you noticed, standalone MacOS distribution of application server is currently not available, but what you can do is to download NetBeans with J2EE bundle or Creator (for free) and install bundled Application Server on this platform. Download URLs are:
http://www.netbeans.info/downloads/download.php?type=4.1
(NetBeans/J2EE cobundle)
http://developers.sun.com/prodtech/devtools/free/
(Creator)
Also, you can install and run Glassfish (which is open-source version of upcoming Application Server 9.0) on MacOS X:
http://java.sun.com/javaee/glassfish/getit.jsp -
HTTP Server for Windows 64 bit not on the companion CD
Hi,
I cannot find the HTTP Server for Windows 64 bit on the companion CD. Any idea where I can get it from? For the 32bit version the HTTP Server is on the Companion CD.
Thanks in advance,
FlorinIf i am correct reason should be : Oracle Application Server 10g will run as a 32-bit application
Following platforms have the same media in either case:
Microsoft Windows 32-bit and EM64T/AMD64
(Not Itanium-64, which is separate and referred to as "Windows 64-bit")
Linux x86 and Linux x86-64
Solaris Sparc 32-bit and Solaris Sparc 64-bit
As the Oracle Application Server 10g will be run as a 32-bit application. See the Installation Guide or readme files for any specific steps on these 64-bit platforms.
Refer the Note.433061.1 - How to Obtain Application Server 10g Media, Patchsets, and Patches -
How do i Install the Software Update Server for Windows 7?
How do i Install the Software Update Server for Windows 7? I get an error saying: Can't Install the Software because it is not currently available from the Software Update server.
I downloaded the software so How do I install it?
Do I install it all over again or when I have windows open?
I am using Bootcamp.Back up your system drive completely. If you have no backup plan in place, now would be a good time to start. You can use CarbonCopyCloner to make a complete, bootable backup of your system on another drive or volume. After you have done this: download the combo update using the link supplied by Niel and run the installer.
-
Using external LDAP server for WL JNDI lookups
I'm trying to find out if it is possible to re-direct JNDI calls to the WL
server to an external LDAP server. I know you can install an external LDAP
server for security purposes, but I would like to use an external LDAP
server to handle all JNDI lookups (like for JNDI EJB name location, etc.).
Is this possible?You typically need to use our JNDI store. We strongly recommend this for
performance reasons..
You can use the JNDI To LDAP bridge which is available from the sun web
site.
Michael Girdley
BEA Systems Inc
"Jack Archer" <[email protected]> wrote in message
news:[email protected]..
I'm trying to find out if it is possible to re-direct JNDI calls to the WL
server to an external LDAP server. I know you can install an external LDAP
server for security purposes, but I would like to use an external LDAP
server to handle all JNDI lookups (like for JNDI EJB name location, etc.).
Is this possible? -
Use of Lotus LDAP server for WLP 7 - LDAP experts ?
Hi,
I'm looking for someone who has used the Lotus LDAP server for WLP7
authentication.
I connect my portal to the Domino LDAP, User and Groups are working
fine, but the membership of a user to a group is not.
I assume that it's related to the parameters I use (especially the
membership.filter ?):
"user.filter=(&(uid=%u)(objectclass=person));
user.dn=O=Apac;
membership.filter=(&(uniquemember=%M)(objectclass=groupOfNames));
group.filter=(&(cn=%g)(objectclass=groupOfNames));
server.host=jpgal01.apac.bea.com;
group.dn="
Any help would be appreciate, because I just don't where to look for.
JP"JP" <[email protected]> wrote in message news:[email protected]..
Hi,
I'm looking for someone who has used the Lotus LDAP server for WLP7
authentication.
I connect my portal to the Domino LDAP, User and Groups are working
fine, but the membership of a user to a group is not.
I assume that it's related to the parameters I use (especially the
membership.filter ?):
"user.filter=(&(uid=%u)(objectclass=person));
user.dn=O=Apac;
membership.filter=(&(uniquemember=%M)(objectclass=groupOfNames));
group.filter=(&(cn=%g)(objectclass=groupOfNames));
server.host=jpgal01.apac.bea.com;
group.dn="
Any help would be appreciate, because I just don't where to look for.
Try setting the com.netscape.ldap.trace property.
\* When -D command line option is used, defining the property with
* no value will send the trace output to the standard error. If the
* value is defined, it is assumed to be the name of an output file.
* If the file name is prefixed with a '+' character, the file is
* opened in append mode.
This will create a ldap trace file of the requests that WLS is making on the
LDAP server. You can then see
where the filters are not returning the correct value for the group
membership. -
Use of Lotus LDAP server for WLP 7 - LDAP experts required
Hi,
I'm looking for someone who has used the Lotus LDAP server for WLP7
authentication.
User and Groups are working fine, the membership of a user to a group is
not.
I assume that it's related to the parameters I use (especially the
membership.filter ?):
user.filter=(&(uid=%u)(objectclass=person));
user.dn=O=Apac;
membership.filter=(&(uniquemember=%M)(objectclass=groupOfNames));
group.filter=(&(cn=%g)(objectclass=groupOfNames));
server.host=jpgal01.apac.bea.com;
group.dn=
I know that this LDAP server supported, but id it could work at least
for some time, that would be great !
thanks for your help,
JP"JP" <[email protected]> wrote in message news:[email protected]..
Hi,
I'm looking for someone who has used the Lotus LDAP server for WLP7
authentication.
I connect my portal to the Domino LDAP, User and Groups are working
fine, but the membership of a user to a group is not.
I assume that it's related to the parameters I use (especially the
membership.filter ?):
"user.filter=(&(uid=%u)(objectclass=person));
user.dn=O=Apac;
membership.filter=(&(uniquemember=%M)(objectclass=groupOfNames));
group.filter=(&(cn=%g)(objectclass=groupOfNames));
server.host=jpgal01.apac.bea.com;
group.dn="
Any help would be appreciate, because I just don't where to look for.
Try setting the com.netscape.ldap.trace property.
\* When -D command line option is used, defining the property with
* no value will send the trace output to the standard error. If the
* value is defined, it is assumed to be the name of an output file.
* If the file name is prefixed with a '+' character, the file is
* opened in append mode.
This will create a ldap trace file of the requests that WLS is making on the
LDAP server. You can then see
where the filters are not returning the correct value for the group
membership. -
Audit Vault server for Windows?
Forgive my ignorance, is there a version of Audit Vault Server for Windows? I haven't been able to find a link for it, just for the Agent.
Thanks!So there is a Windows version somewhere, it's only that I haven't found it. When I go to the download page http://www.oracle.com/technology/software/products/auditvault/index.html, all I see is:
Oracle Audit Vault Server (10.2.3)
Download for Linux x86 (930,289,516 bytes) (cksum 1842170548)
Download for Linux x86-64 (1,106,767,762 bytes) (cksum 314005762)
Download for Solaris Operating System (SPARC) (64-bit) (1,189,201,196 bytes) (cksum 2466057202)
Download for AIX5L (1,880,746,261 bytes) (cksum 3844667670)
Download for HP-UX Itanium (1,715,251,924 bytes) (cksum 3230968629)
Maybe you are looking for
-
InDesign crashes every time I try to open it
Help please!!!! Every time I try to open Indesign it crashes and I have done the updates and it is still crashing before I can even open a file or do anything!!! Please help!
-
Is there a print button for WORD, Exel, PowerPoint To Go, etc.? No where to be found. What's up with that?
-
Transferring information from G4 tower to Pro
I have a G4 tower w/ 3 hard drives named Macintosh HD, 60GB Hard Drive and Main HD. The 1st came w/ the computer - the 2nd is on top of the 1st. The third is an ATA drive running off of a Sonnet Temp ATA133 adapter card. In starting up the Pro wanted
-
Hi to all, I want to synchronize the central sld of our production XI with the backup from the test sld, like in note 935474 grouping sld instances described. Import of CIM model works, import of backup of sld doesn't work. It is impossible to import
-
Last night I attempted to roll a Crystal Reports .NET project to my production web server. This app has 3 new Crystal Reports. The Reports are all based upon the same Oracle Views on the same Oracle Database. Two of the reports work while the third r