Use of Project(CMOD) in exits:

Hi all,
Can anybody tell me what is the exact use of Project in user exits.
Thanks in advance.

hi,
SMOD : for single user .
CMOD: for USER-GROUP.(set of users doing the same task will be kept in one group based on the requirement for the group we will set authorizations.)
thnks,
raji

Similar Messages

How to use formula variable in customer exit

Hi all,
I just want to use formula varible in customer exit
For eg,
I have created formula variable with user manual lnput eg: ZFM_V01 = 30
Another char variable with user manual input eg: 0keydate = 28/02/2011
Required output,
I just want to read my ZFM_V01 value in customer exit
Result = 0KEYDATE - ZFM_V01
EG:
result = 28/02/2011 - 30
Required result = 29/01/2011
Kindly guide me how u get formula varibale value into customer exit(CMOD) and find the required result. please help me.
Thanks & Regards,
R. Saravanan

Sorry, Bhanu,Ashwin need more info
As my understand ::
Function module RSW_CURRENCY_TRANSLATION uses the following parameters
Import parameters
I_CTTNM : Currency translation key (optional)
I_AMOUNT: Amount in source currency (not optional !!) (data type: floating point !!)
I_SCUR : Source currency (optional) I_TCUR : Target currency (optional)
I_TIME_IOBJVL : InfoObject for determination of the time reference (optional)
I_SCUR_IOBJVL : InfoObject for determination of the the source currency (p.eg. 0COMP_CODE) (optional)I_TCUR_IOBJVL : InfoObject for determination of the the target currency (p.eg. 0COMP_CODE) (optional)
I_PERIV : Fiscal year variant (optional)
I_RATE : Exchange rate (optional)
Export parameters
E_AMOUNT : Amount in target currency (data type: floating point !!)
E_RATE : Exchange rate
E_SCUR : Source currency
E_TCUR : Target currency
I created a Currency key(ZXX) which takes CAD and converts to GBP on Planned Exchange rate (P) with time reference 0CALMONTH.
In my case :
Currency Key : ZXX (Confused here)
Source Curr :CAD
Target Curr :GBP
I need a Variable ,which takes time reference and gives back the exchange rate .
,,I am I missing some thing ?
Sudh

Logical component cannot be used in project

HI
after i add logical component in solar_project_admin
i try to check system landscape
and i get error "Logical component SAP_ERP_EHP_ABAP_EHP4 is not used in project (the name of the project)"
i used in 2 different logical component in this project
you now whay?
best regards
Naor

I am receiving this message right now, while conducting prototype testing.
Message no. SOLAR_SPROJECT055 - Logical component Z_CHARM_PT is not used in project CHARM_PT01
I used this logical component in a previous solman project and it worked. Now I have closed that project and am trying to create a new one using the same logical component.
Any help or suggestions are appreciated. Thanks.

Trying to use laf project for the first time

hi all , i need help , please
i am trying to use laf project for the first time as i said , and i want help on
the installation process
step by step please , i am soo junior here
i've just downloaded the zip file as the site said (http://fdtool.free.fr/LAF/doc/implementation.htm)
please go to this url and declare the steps to me
thanks in advance

The Forms Look and Feel Project is not an Oracle product. This product was developed by Francois Degrelle. Francois has posted numerous times in this forum that if you need help with the LAF you have to go to the Oracle Forms Look & Feel Project web site or his PJCs and Java Beans Forum for support.
Craig...

Set PF-STATUS and use SY-UCOMM in an Exit FM

Hi,
I am working on an Exit function, and I am trying to read the screen status and then the user's actions, so that I could code for the SY-UCOMM. For some reason, my program is not working. Is it possible to add the PF-STATUS and SY-UCOMM to the Exit function to process the user's actions? Please advise.
Thanks,
RT

Hi Ravikumar,
I was able to use the parameters in the Exit provided in the Exit FM to process the necessary data. I have other requirements where I would have to code in the Exit FM to detect the user's actions and process them within the Exit to manipulate the tables. I added some code specified in the previous post, but it doesn't seem to get the OK_CODE; therefore, no processing of the data was happening when I tested by clicking on the yellow arrow to exit. I am able to determine the OK_CODE though.
Would you have any sample code suggestions when using the Exit for SET PF-STATUS and SY-UCOMM?
Thanks so much.
RT

Combine two reports in query designer using key figure with sap exit

Hi experts,
i want to combine two reports in query designer using key figure with sap exit
in the report 1 key figure calculation based on the open on key date(0P_DATE_OPEN)
to calculate due and not due in two columns
in report 2 key figure calculate in the time zones using given in variable Grid Width (0DPM_BV0) like due in 1 to 30 days, 31 to 60 days...the due amount based on the open on key date(0P_DATE_OPEN)
to calculate in 1-30, 31-60, 61-90, 91-120, 121-150 and >150 days in 6 columns
now i have requirement like this
not due, 1-30, 31-60, >60, due,1-30, 31-60, >60 in 8 columns
or
not due, due, 1-30, 31-60, 61-90, 91-120, 121-150 and >150 in 8 col
thank you

Hi Dirk,
you perhaps know my requirement,
for the management to make used in one report,
we have in reporting finacials Ehp3.
Vendor Due Date Analysis - which show due, not due
Vendor Overdue Analysis - show only due and analysis in time grid frame
i want to combine in one report that show NOT DUE, DUE, DUE time frames in grid.
krish...

In which table can I find a project (CMOD)and enhancement (SMOD)??

In which table can I find a project (CMOD)and enhancement (SMOD)??
or else please suggest to me how I can find the project assigned to a enhancement?
Regards,
Shashank.

Shashank,
It looks like table MODACT makes the link between the project and the contained enhancements.
Regards,
Gary

Using ms project 2007 and vba macro to list all the custom fields used in the project?

Hi,Using ms project 2007 vba macro, I would like to be able to list all the custom fields used in the project and their corresponding field names. e.g. let us say I create a calculated duration field and name it "expected duration" and the name
of the field I select is Duration1.
I am trying to write a macro that will list all the used custom fields such as the result would look like:
Duration1 ---> "expected duration"
Text1 ---> "anything"
Flag1 ---> "....."
Number1 ---> "..............."
Can anyone provide me with the solution?
Regards,
Chuck

John,
I found this module, which provides the the list of custom fields used in the project but does not provide the name given to the field. Here below is the module and hope you could help me achieve this by modifying the macro to list the renamed field.
' MSP Checks all Custom Task Fields
Sub checkfields2()
'This macro will check and report out which custom task fields are used
'It requires Project 2002 and above as it relies on the GetField
'and FieldNameToFieldConstant methods which were not introduced until
'2002.
'It does not include resource fields, however it is a simple matter to
'do it by replacing the pjTask constant with pjResource.
'Copyright Jack Dahlgren, Oct. 2004
Dim mycheck As Boolean
Dim myType, usedfields As String
Dim t As Task
Dim ts As Tasks
Dim i, it As Integer
Set ts = ActiveProject.Tasks
usedfields = "Custom Fields used in this file" & vbCrLf
myType = "Text"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 30
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> "" Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Number"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 20
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> 0 Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Duration"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 10
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If Left(ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)), 2) <> "0 " Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Cost"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 10
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> 0 Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Start"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 10
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> "NA" Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Finish"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 10
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> "NA" Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
MsgBox usedfields
End Sub
This is what the module gives me. But I would like to have beside Text 1 the name that is shown as below. e.g Text1 is "Test".
Would you mind helping me achieve this?
Thanks in advance.
Chuck

How can i use the project code instead of project xml?

hello
i use the sessionbean+toplink structure,after i finish the o-r mapping by using the mapping work bench,i generate the project xml file,then in the "session.xml" file,i refer to the project xml,then i can use it from sessionbean.
i hear that if i use the project code instead of project xml file,it will be more performant,is that true?
otherwise,how can i use the project code instead of project xml file?i mean, in "session.xml", i can use the "<project-xml>" tag to refer to the project xml file,then in my session bean,i get the server session by read the "session.xml" file.but if i use the project code,how can i refer it from the "session.xml"?the examples that come with the toplink installation only tell me how can i use the project xml file within the session bean,it don't give me any clue about using the project code in the sesion bean,who can give me a step-by-step instruction and code snippet?
thank you very much?

There is a slight performance gain during session load at startup but there is no difference at runtime. The choice of which to use is dependent upon you build process. Whether it is easier to submit a new version of the class into the comile build process vs an XML file. In most cases it is just a preference of the development team.
When you use the project-class you'll need to generate the source code and compile it into your system. Typically it is packaged with the persistent classes. You may need to configure your environment so that the class-loaders have access to these classes (same for the XML case).
When using the project-class you simply replace the project-xml entry like this:
<project-class>oracle.toplink.demos.employee.relational.EmployeeProject</project-class>
The DTD for the session.xml file is found at <TOPLINK_HOME>\core\sessions_4_5.dtd. It is also in the documentation at:
http://otn.oracle.com/docs/products/ias/doc_library/90200doc_otn/toplink.903/b10064/a-sessio.htm#634246
Doug Clarke
Product Manager
Oracle9iAS TopLink

Import the WSDL file in NWDI 7.2 using EJB Project

Hi Experts,
This is my Requirement:
I have WSDL File and it is working in the Portal.I have checked in the WSNavigator.
Now i need to import the WSDL file in NWDI 7.2 using EJB Project.
Please let me know the steps to import the WSDL File.
Thanks & Regards,
SatheshKumar R

Hi
Please look at this documents for that
[How to Develop an Enterprise Service Provider for SAP|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90d95d37-3f65-2a10-8fa9-a13738c93ea7?quicklink=index&overridelayout=true]
http://help.sap.com/saphelp_nwce10/helpdata/en/46/7f2fef88190ad3e10000000a11466f/content.htm
Hope this helps!!
Thanks & Regards
Vijay K
Edited by: VijaySAPEP on Sep 13, 2011 11:34 AM

Using Eclipse project definitions to build the Flex SDK

It would be great if someone from Adobe could post on the recommended usage of the Eclipse project definitions in the development/eclipse/ subdirectory of the 3.0.x trunk distribution. I would like to debug some compiler modifications that I am working on.
I saw Peter Farland demo this setup at 360Flex, but was unable to capture all the details of the Eclipse configuration that he discussed in his talk.
thanks!

If you go to the framework project’s properties, there is a section called Flex Library Compiler, you want to use a specific flex sdk (add a new sdk which points to the trunk, and use that) — you are probably building /against/ the wrong sdk, right code, wrong compiler.
- Jono
From: Ben Clinkinbeard <[email protected]>
Reply-To: <[email protected]>
Date: Thu, 3 Apr 2008 12:56:01 -0700
To: <[email protected]>
Subject: Re: Using Eclipse project definitions to build the Flex SDK
A new message was posted by Ben Clinkinbeard in
Developers --
  Using Eclipse project definitions to build the Flex SDK
Sorry, I'm not following. My SDK project is from the trunk.
Thanks,
Ben
On Thu, Apr 3, 2008 at 3:32 PM, Jono Spiro <[email protected]> wrote:
A new message was posted by Jono Spiro in
Developers --
  Using Eclipse project definitions to build the Flex SDK
Try changing the sdk for the framework lib project to trunk (you'll need to add a new flex sdk, name it whatever you want) -- it's in the project properties. It's using the wrong compiler.
- Jono
From: Ben Clinkinbeard <[email protected]>
Reply-To: <[email protected]>
Date: Thu, 3 Apr 2008 05:13:43 -0700
To: <[email protected]>
Subject: Re: Using Eclipse project definitions to build the Flex SDK
A new message was posted by Ben Clinkinbeard in
Developers --
  Using Eclipse project definitions to build the Flex SDK
I am running FB on top of Eclipse 3.3.2.
<http://3.3.2.> <
<http://3.3.2.>
http://3.3.2.> I checked out the whole SDK trunk and can build the main ant task with no errors. I used the instructions mentioned above to create a Flex framework library project and thats where the error comes in. (I had tried to manually build a framework project a few times and it was a nightmare.) I would probably prefer to work on the 3.0.x branch/tag as I hope to submit a patch or two but saw Joe mention that the project defs only existed in the trunk.
Searching Google for the oem error turns up lots of links about projects that had assets deleted and the build got confused but following the instructions on how to fix proved unsuccessful.
Thanks,
Ben
On Thu, Apr 3, 2008 at 1:45 AM, Jono Spiro <[email protected]> wrote:
A new message was posted by Jono Spiro in
Developers --
  Using Eclipse project definitions to build the Flex SDK
I always forget what that error means when it comes up -- though it's been ages since I've seen it last, literally.
Joe: Since you mention Java 1.5, I'm guessing the errors are in the asdoc package? Those should be turned off (read: turned into a warning) -- Eclipse is a little too persnickety about that particular error. There's a preference for this in the Java section under warnings and errors. It's turned off in the trunk dev projects. Otherwise, you should be able to run the compiler directly with no problems (okay, one more caveat: there's a class loader issue with the OEM, fixed in trunk if you look for my Java 1.5 checkin).
Ben: What is your setup? What are you building (Ryan mentions trunk, Joe mentions 30x), which Eclipse, which dev projects, did you build the sdk from the commandline first, etc.?
Cheers,
Jono
View/reply at Using Eclipse project definitions to build the Flex SDK <
<http://www.adobeforums.com/webx?13@@.59b4a9d4/3>
http://www.adobeforums.com/webx?13@@.59b4a9d4/3>
Replies by email are OK.
Use the unsubscribe <
<http://www.adobeforums.com/webx?280@@.59b4a9d4%21folder=.3c060fa3>
http://www.adobeforums.com/webx?280@@.59b4a9d4%21folder=.3c060fa3> form to cancel your email subscription.
View/reply at Using Eclipse project definitions to build the Flex SDK <
<http://www.adobeforums.com/webx?13@@.59b4a9d4/5>
http://www.adobeforums.com/webx?13@@.59b4a9d4/5>
Replies by email are OK.
Use the unsubscribe <
<http://www.adobeforums.com/webx?280@@.59b4a9d4%21folder=.3c060fa3>
http://www.adobeforums.com/webx?280@@.59b4a9d4!folder=.3c060fa3
<http://www.adobeforums.com/webx?280@@.59b4a9d4%21folder=.3c060fa3> > form to cancel your email subscription.
View/reply at Using Eclipse project definitions to build the Flex SDK
<http://www.adobeforums.com/webx?13@@.59b4a9d4/6>
Replies by email are OK.
Use the unsubscribe
<http://www.adobeforums.com/webx?280@@.59b4a9d4%21folder=.3c060fa3> form to cancel your email subscription.
View/reply at Using Eclipse project definitions to build the Flex SDK
<http://www.adobeforums.com/webx?13@@.59b4a9d4/7>
Replies by email are OK.
Use the unsubscribe
<http://www.adobeforums.com/webx?280@@.59b4a9d4!folder=.3c060fa3> form to cancel your email subscription.

When to use what project type?

Hi,
I am kind of baffled by the use of Flash Project in Flash Builder 4.
Flex Project is for build RIA\Flex applications with a design view available for creating the GUI.
ActionScript projects allow you to program\debug AS3 code and only when you run the application you get a visual feedback.
1) But when will I want to use Flash Projects?
The reason I am asking is that I have a project that currently works by running a main swf file that in turn loads additional swf files (Sorry I can't show you a demo), switching the loaded swf every 30 seconds.
I am leaning to use a Flash Project to manage my project. On the other hand, I could move the entire project to Flex and implement the different swfs as different states of the GUI.
2) What do you think?
Thanks for your help and feedbacks.

You can start reviewing this topic from here
http://help.adobe.com/en_US/flashbuilder/using/WS6f97d7caa66ef6eb1e63e3d11b6c4d0d21-7ffb.h tml#WSbde04e3d3e6474c4-63107a8b12642da83ed-8000
I would also want to add some details about my project that cause me to ponder on what project type to use.
1) My project involves multiple flash\swf files that are loaded during work. I need to manage their creation.
2) All my swfs are loaded as part of a single application that runs in the backgrounds and loads each swf to display different information.
3)I have many as3 files that I use and would also like to manage them properly.
4) I would have liked to manage the project under a cvs project, like you can do with Java, so I don't have to do manual backups.
Any ideas?

No Query Result After Using Hierarchy Node Variable (Customer Exit)

Hi
I have problem at my query. It doesn't show anything in BEx but when i check the data in BW using tcode LISTCUBE i can display the data.
This problem happen when i change the restrictions for one of characteristic in filter value.
The characteristic is custom Infoobject (ZCPARTNER), which like Infoobject Partner Unit.
Previously I set the restriction with constant value, example : A500,A700,A710,A720,A730,A740 and it worked before.
But when I change it using hierarchy node variable (customer exit), this problem is arise.
Here is my code at ZXRSRU01
WHEN 'ZHIEPART'. --> hierarchy node variable
   BREAK-POINT.
    IF i_step = 2.
    Read from ZZCONSGR information
      LOOP AT i_t_var_range INTO loc_var_range
         WHERE vnam = 'ZZCONSGR' OR vnam = 'ZOCONSGR'. --> read input value from consolidation group variable
        CLEAR l_s_range.
        CLEAR l_s_range-low.
        IF loc_var_range-low EQ '000000000000030000'
           OR loc_var_range-low EQ '000000000000010130'.
          l_s_range-low = 'MEZBUNITMDI'.
          l_s_range-high = '0HIER_NODE'.
        ELSEIF loc_var_range-low EQ '000000000000040000'
           OR loc_var_range-low EQ '000000000000010160'.
          l_s_range-low = 'MEZBUNITMPI'.
          l_s_range-high = '0HIER_NODE'.
        ENDIF.
        l_s_range-sign = 'I'.
        l_s_range-opt = 'EQ'.
        APPEND l_s_range TO e_t_range.
        EXIT.
      ENDLOOP.
    ENDIF.
Here the hierarchy in BW system:
XXX Cons Unit Hierarchy Set; InfoObject ; Node Name
- XXX Cons Unit Hierarchy Set; 0HIER_NODE; ZBUNITALL
- XXX DownStream ... ; OHIER_NODE; MEZBUNITMDI
     - ME/A730; 0CS_UNIT; MEA730
     - ME/A740; 0CS_UNIT; MEA740
- XXX Power ; OHIER_NODE; MEZBUNITMPI
    - ME A800 - A808; OHIER_NODE; MEZBUNITMPI
    - PT Mitra xxx; 0CS_UNIT; MEA820
Anyone can help my problem? Thank you
Regards,
Satria B Tandyono

Hi Satria,
Instead of following code ---
CLEAR l_s_range-low.
IF loc_var_range-low EQ '000000000000030000'
OR loc_var_range-low EQ '000000000000010130'.
l_s_range-low = 'MEZBUNITMDI'.
l_s_range-high = '0HIER_NODE'.
ELSEIF loc_var_range-low EQ '000000000000040000'
OR loc_var_range-low EQ '000000000000010160'.
l_s_range-low = 'MEZBUNITMPI'.
l_s_range-high = '0HIER_NODE'.
ENDIF.
try this ---
IF loc_var_range-low EQ '000000000000030000'
OR loc_var_range-low EQ '000000000000010130'.
l_s_range-low = 'MEZBUNITMDI'.
ELSEIF loc_var_range-low EQ '000000000000040000'
OR loc_var_range-low EQ '000000000000010160'.
l_s_range-low = 'MEZBUNITMPI'.
ENDIF.
Note : whenver the option is EQ, the system takes only low value.

Drive 2.1 can not connect to our cs3 versioncue server what do I need to use our projects in CS5?

Mac XServe is our CS3 server. Trying to upgrade to CS5 and found out Version Cue is no longer. Read and found the Drive 2.0. It can't seem to connect to my current server. We still have access with one of our CS3 machines. Is there a program I need to get to continue on with our versioning and the ability to use our projects we have? Or do I need to go into every project and export or something to be able to start using CS5? Thank you in advance for any help!!!

sunnovagun!
Hitting the Log Out button in the MobileMe panel worked. I can now connect to both the SnowLeopard and Lion servers just like I used to.
My condition appears to have been slightly different from yours, gmia - the MobileMe on my MBP had the correct info, but hose are not the credentials i use to remote to the two servers. I'm guessing that for some reason ScreenSharing began using my MobileMe credentials instead of what I had saved in the keychains.
Wonder if it had anything to do with the shutdown of the MM servers. That would be odd as using ones apple ID to log into a Mac remotely was new with Lion, and I had the same problem with our SnowLeopard server - which I remote into much more frequently.
Probably didn't hurt though to reboot the entire network...

Can I use Microsoft Project Professional to connect hyperlink a some documents in the server of our company?

Just like the titre,
Can I use Microsoft Project Professional to connect hyperlink to some documents in the server of our company? I want to share some documents not in my computer, which is in the server of our company.

Hello,
Sure you can, right click on required task that relates to the document, at the bottom on that menu you will see "Hyperlink". Click Hyperlink and a new window will open, in the new window in the "address" field type or paste in the web address / file share
address etc. Click OK then you will see a web link appear in the indicator column.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

Use of Project(CMOD) in exits:

Similar Messages

Maybe you are looking for