Use of transaction code IP30

Hi all,
Could anyone please tell me the use of Transaction code IP30.
Actually we have scheduled some order but they did not get created when the date of creation came. Then we ran IP30 transaction code to see their deadline.
Then scheduled object got converted into the service order but the service orders dont have sold-to party (consumer nos.).
Please guide me how should we use IP30 Transaction and what should i do so that service order can have consumer no. when they get created.
Thanks and Regards
Mahavir

Hi,
Please tell me is it necessary to run the IP Transaction code for each maintenance plan that we have scheduled?
Yes if it is needed that the plan should generate orders it needs to be scheduled either in backgroud job or needs manually executed.
Can a service order be generated automatically without running IP30 if we have scheduled a maintenance plan?
Yes you can get a service order (PM Order ) against this plant maintenance order with control key as pm03 you can get PR from PR You can get service order agin here MM intergration if the auto po concept used then auto po (service order) gets generattted.
But if u want to avoid lengthy process u can use IP10.
During each IP10 run if call falls within the date u will get maint call object that is pm order -
>pr------->po
pm order----->fo (frame work order)
pm order -
>service contract -
>value / qty
(These tab u will get in pm order operation header genarl data)
Hope this is in line with your requirement.
Thanks and Regards
Ramesh

Similar Messages

Can we make use of Transaction code FKMT for vendor line items

Hi
Please advise me whether we can make use of Transaction code FKMT (Account assignment model) for vendor line items as follows:
For Example:
Expenditure Account      Dr.       Rs.1000
         To Vendor A                                      Rs.100
         To Vendor B                                      Rs.100
         To Vendor C                                      Rs.100
          To Vendor D                                      Rs.700
Also please advise me what to give parameters
Thanks and Best Regards
Shekhar
Edited by: Shekhar Yecham on Sep 19, 2008 7:05 AM
Edited by: Shekhar Yecham on Sep 19, 2008 7:10 AM

Dear Kulakarni,
I found few of my fields in 0FI_AP_4.I did n't find few fields can i enhance the Datasourse.
What is the respective Cube for that Datasourse.
I check 0AP_30,but in Business Content that cube is not available.
Could you please give me guidance.
Thanks in Advance,
Srinivasan.

How to execute a report using a transaction code?

Hi team,
I am new in ABAP and I want to do a very simple report and then call this report using a transaction code.
Steps:
1) create the report (SE38)
   the report is: Z_DEMO
2) generate a transaction code for this report (SE93)
   note: the transaction code is ZDEMO
3) call the transaction generated on step 2
When I execute the report using SE38, everythig is ok and the records are inserted in my table zdemo2.
But when I call my transaction ZDEMO there is no insertion. Why?
The report ask for parameters and then fowards me to SAP's main menu.
Thanks,
Walter.
The report is:
REPORT Z_DEMO.
tables: zdemo2.
parameters:
        nombre like zdemo2-nombre,
        edad like zdemo2-edad.
data:
      begin of tabla occurs 0,
        nombre like zdemo2-nombre,
        edad like zdemo2-edad,
      end of tabla.
zdemo2-nombre = nombre.
zdemo2-edad = edad.
insert zdemo2.

Hi,
While creating the transaction for your program
1>Make sure u give the program name and screen number
2>Important thing is a option "GUI SUPPORT"
Check all the checkboxes or atleast SAPGUI for Windows to ensure that the Code runs in SAP GUI.
Thank you.

Investment mgt:Error while distributing budgets using IM52 transaction code

I am getting an error message"Availability control can not be activated for hierarchial projects" when I distribute budgets using IM52 transaction code in Investment management.
Can you please tell me why and how to solve it?
Edited by: aravind reddy on Aug 19, 2008 4:34 PM

I am getting an error message"Availability control can not be activated for hierarchial projects" when I distribute budgets using IM52 transaction code in Investment management.
Can you please tell me why and how to solve it?
Edited by: aravind reddy on Aug 19, 2008 4:34 PM

What is the use of transaction code FAGLGA15

What is the use of transaction code FAGLGA15.What is its functionality.Please help.

Hello,
Yes, you are right. Before ECC 6.0 version the TC: KSU5 has been used for actual assessment. Now in ECC 6.0 the same transaction code has been changed to FAGLGA15. You can execute the actual assessment in test run and if it is ok then run in background.
Thanks
Para

What is the use of transaction code VF24

what is the use of transaction code VF24. if possible please provide some documentation

Hi,
The main use of VF24 transaction code : edit work list for invoice list.
This enables the user to understand the processes left during the combine processing of invoices.
like which are left for releasing to accounts, which have still pending payment posting, with respect to the invoice list consisting of the combination of invoices.
invoice list is a combination of different invoices with same critierias. so to check and process these invoice lists collectively this function is used.
regards,
siddharth.
regards,
Siddharth.

Use of transaction code GLGCU1

Hi sap gurus,
my customer has two ledgers one is for local gaap and one is for IFRS. however assingment of NL to a company code is made after go live. all other companies ok but this company code have openning balance problem with AR and AP balances because, these balances are not transferred to NL.
now i want to use GLGCU1 transaction code to transfer these balances to NL for this company code.
Will there be any problem if i use this transaction code while the users goes on their operation on prod system.
are there any points that i should consider when using GLGCU1?

Dear Ahmet,
I just want to add some additional information to this thread in relation to transaction GLGCU1 (report RGURECGLFLEX).
In general, SAP recommends to customers never to use this report to generate NewGL entries without Supervision/Advice from SAP Support directly.
Reposting NewGL entries (FAGLFLEXA & FAGLFLEXT update generally) with GLGCU1 can result in a wide variety of issues unless properly supervised. For example, if it is run in a closed fiscal year it can result in changes to the balance sheet figures which is strictly forbidden. Additionally, other issues with clearings and account assignments can result with improper use.
The safest and best option in relation to the use of this transaction is to always consult with SAP by opening an incident so that we can review your situation and advise accordingly.
Kind regards,
Declan

Use of Transaction code: MBNL

Hi,
Can someone explain with example what is the use of Transaction code: MBNL
Thanks in advance
Regards

Hi,
Enter subsequent delivery (transaction code MBNL)
In goods-receipt-based invoice verification, you can post goods receipts as subsequent deliveries for previous goods receipts by referencing the original goods receipt document. In this process, the system copies the original reference document number (MSEG-LFBNR) to the new material document, thereby maintaining the link between the goods receipts and the corresponding invoice.
Subsequent deliveries are useful, if, for example:
You reverse a goods receipt after you have entered the corresponding invoice and then want to post another goods receipt
You post a return delivery and want to enter the next goods receipt with reference to the return delivery document so that the link with the invoice remains intact.
You can use the subsequent delivery function for the following business transactions:
Goods receipt (movement type 101)
In this case, you post a further goods receipt for a purchase order (for example, in the case of partial deliveries or additional deliveries).
Return delivery (movement type 122)
In this case, you post another goods receipt after you have entered a return delivery (also refer to Return Delivery).
Reversal of goods receipt (movement type 102)
In this case, you post another goods receipt after you have reversed a goods receipt.
Best regards
Erika

Detect user to see if still using the transaction code

Hi,
Is there a way to detect if the user is still working in a transaction code that the Exit FM is linked to? I have a requirement to detect the user's action within the transaction code enviroment and then according to whatever the user is doing, the Exit FM should process certain tasks. Instead of checking for the OK_CODE for the screen status, can I check the transaction code level to see if the user is still working with it?
Thanks,
RT

Hi Rich,
Actually I am trying to detect whether a user is still working in the transaction code or not. I have tried to code the PF-STATUS and SY-UCOMM to detect the user's allowable actions within this transaction code, but I was told that the Exit FM cannot recognize the PF-STATUS and its OK_CODE, so I am now trying to take a different approach by detecting whether the user has either exited the transaction code or the BW system.
I am trying to refresh a transparent table within the Exit FM based on whether the user is doing something when using this transaction code. The Exit FM is doing the refresh.
Would you think this is possible? Please advise.
Thanks,
RT
Message was edited by: Rob Thomas

Any body using MCSI Transaction code

Hi friends,
If any body using mcsi transaction code. plz help me. After entering transaction code in output screen dirll-down box is there . I want like that dirll down box for our new requirement. If any body femiliar with this issue dirll down box plz give me replay.
Regards
S.Murali Naidu

Hi the logic there is first displays all Sales Org. data..
after clicking (AT LINE-SELECTION event) write code to display selected Sales Org (we can get that using HIDE statements as well as SY-LISEL fileds value).
Again repaets the same in AT LINE-SELECTION depending on requirement...

Error exec. Background Mode a Batch-Input using KP26 Transaction Code

I have a program that build a Batch-Input based on transaction code KP26.
I encounter the following error :
Field Z-BDC02(1) is not an input field (Program : SAPLKPP2 Screen : 0112)
When executing in background I got the error and when executing in Foreground, it is OK.
I use SHDB to look at the field needed and it gave me the same field to use.
Here is an extract of my program for the field I have the issue on :
    PERFORM F100_BDC_FIELD USING 'Z-BDC02(01)' I_T01-LST.
    PERFORM F100_BDC_FIELD USING 'Z-BDC05(01)' I_T01-SPRED.
    PERFORM F100_BDC_FIELD USING 'Z-BDC07(01)' I_T01-TOV.
    PERFORM F100_BDC_FIELD USING 'Z-BDC08(01)' I_T01-TOF.
Any one have an hint to solve this ?

Hi,
Just one remark: batch input is always executed in synchronous mode (hopefully, otherwise we would get many lock issues during mass updates!) Or is there something I missed?
Same thing when you use BDC_INSERT, CTU_PARAMS is ignored ([SAP note 1437811 (Batch input: BDC_INSERT parameter CTUPARAMS)|https://service.sap.com/sap/support/notes/1437811 ])
About the issue, I don't know, so maybe explain more about the context: for instance, do you run the session under a different user? (for instance, the user could be assigned a transaction/screen variant with table control variant, that protects some fields) Do you have one transaction in the batch input session or are there several ones. Try with one only to see if it works. If yes, then maybe it's something in memory that changes the "input-capability" of the field after the first transaction.
Sandra

How to create inspection lot manually without using QA01 Transaction code?

Hi,
Please anybody give procedure for creating Inspection Lot Manually without using Transaction Code QA01

Hello, Srinivas,
If you want another T code only then you can try QA01A.
or you can create a Physical Sample with QPR1 and then click on the button there to create inspection lot. To create inspection lot for that Physical sample (you will able to see that button only after releasing the sample) Or you can use QPR5.
But let me know the reason why you want T code other than QA01.
Regards,
Shyamal

How to restrict a user from using the transaction code SU01?

How can I grant a profile to a user with the profile SAP_ALL except running the transaction code SU01?
I know how to lock the transaction code using SM01 but is there any other way to do it.

Go to S_TCODE
Double click on it and give the combinations like        A* -   X*
                                                                             SU00
                                                                             SU02 - Z*
                     Try this one definately it will work.

Problem in BDC program using MIGO_GO transaction code

Hi Gurus
I have developed a BDC session upload program. The program is
running fine except for the issue that when it goes the subscreen in
MIGO_GO transaction (same as MIGO) it does not generates any code
for page down or next page key. While recording after 15 entries
(end of page) it moves automaticaly to the next page on line 2 but
when I have used my own itab to fill data into this screen it
passes/generates the code for page down with clear screen. It does
go to item 2 but overwrites earlier entries instead of generting new
one.
Any suggestions?
Guys this is very urgent so need ur feedback immediately?
Lots of thanks in advance.
The code is as follows:
PURPOSE: The purpose of this upload program is to upload
receipt
against Production Order. Data is uploaded into SAP
via text
file which is converted from pre-defined excel file
pattern.
REPORT zmm_migo_rec
NO STANDARD PAGE HEADING LINE-SIZE 255.
*Excel column sequence SAP Material Number Batch # Crop Year
Process Date Net Weight Plant Area Gross
Weight Plant Number Shift Mat.Desc Prod.Ord#
TYPES : BEGIN OF st_barcode,
m_matnr LIKE mara-matnr,
m_batch_no LIKE mseg-charg,
m_crop_year TYPE c LENGTH 4,
m_process_date LIKE mkpf-bldat,
m_net_wt TYPE c LENGTH 7,
m_plant_area TYPE c LENGTH 5,
m_gross_wt TYPE c LENGTH 7,
m_plant_num TYPE c LENGTH 1,
m_shift TYPE c LENGTH 1,
m_matnr_desc TYPE c LENGTH 30,
m_prod_ord LIKE mseg-aufnr,
text(200),
text1(200),
END OF st_barcode.
DATA : itab_barcode TYPE TABLE OF st_barcode WITH HEADER LINE.
DATA : itab_log TYPE TABLE OF st_barcode WITH HEADER LINE.
DATA : itab_log1 TYPE TABLE OF st_barcode WITH HEADER LINE.
DATA : g_filename TYPE rlgrap-filename.
INCLUDE bdcrecx1.
Start of Selection Screen for document data, screen data and
posting date fields.
SELECTION-SCREEN BEGIN OF BLOCK a1 WITH FRAME TITLE text-000.
PARAMETERS :
p_dummy TYPE i DEFAULT 0,
p_bldat LIKE sy-datum OBLIGATORY DEFAULT sy-
datum, "Document date
p_budat LIKE sy-datum OBLIGATORY DEFAULT sy-
datum, "Posting date
p_frmplt LIKE t001l-werks OBLIGATORY,
p_frmloc LIKE t001l-lgort OBLIGATORY,
p_toloc LIKE t001l-lgort OBLIGATORY,
p_rsnmov LIKE mseg-grund OBLIGATORY,
p_bsarea LIKE mseg-gsber OBLIGATORY,
cb_simul AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK a1.
START-OF-SELECTION.
*to remove unnecessary fields from selection screen
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF screen-group4 LT '060' AND screen-group3 NE 'BLK'.
screen-active = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
*to Process Call Transaction in Error Mode
ctu = 'X'.
ctumode = 'A'.
nodata = space.
END-OF-SELECTION.
Get data from file
PERFORM f_get_data.
Validate data retrieved from excel file
PERFORM f_validate_data.
Batch data / simulate.
IF cb_simul IS INITIAL.
PERFORM f_prized_data.
PERFORM f_write_log.
ELSE.
PERFORM f_write_log.
ENDIF.
*& Form F_GET_DATA
This module is used to read text file data into SAP itab.
FORM f_get_data .
Select the file to be uploaded
CALL FUNCTION 'UPLOAD'
EXPORTING
filename = g_filename
filetype = 'DAT'
TABLES
data_tab = itab_barcode
EXCEPTIONS
conversion_error = 1
invalid_table_width = 2
invalid_type = 3
no_batch = 4
unknown_error = 5
gui_refuse_filetransfer = 6
OTHERS = 7.
ENDFORM. " F_GET_DATA
*& Form F_VALIDATE_DATA
text
FORM f_validate_data .
DATA : BEGIN OF lt_marc OCCURS 0,
matnr LIKE mard-matnr,
werks LIKE mard-werks, " Plant
END OF lt_marc.
RANGES : lr_matnr FOR mara-matnr.
READ TABLE itab_barcode INDEX 1.
Prepare Ranges to check/verify Material from Table MARD i.e.
respective plant
lr_matnr-sign = 'I'.
lr_matnr-option = 'EQ'.
LOOP AT itab_barcode.
Add leading zeros incase of numeric value.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = itab_barcode-m_matnr
IMPORTING
output = itab_barcode-m_matnr.
lr_matnr-low = itab_barcode-m_matnr.
APPEND lr_matnr.
MODIFY itab_barcode TRANSPORTING m_matnr.
ENDLOOP.
IF NOT lr_matnr[] IS INITIAL.
SORT lr_matnr BY low.
DELETE ADJACENT DUPLICATES FROM lr_matnr COMPARING low.
SELECT matnr werks FROM marc
INTO TABLE lt_marc
WHERE matnr IN lr_matnr AND
werks = p_frmplt.
ENDIF.
LOOP AT itab_barcode.
READ TABLE lt_marc
WITH KEY matnr = itab_barcode-m_matnr
werks = p_frmplt.
IF sy-subrc <> 0 .
CONCATENATE 'Material' itab_barcode-m_matnr
' does not exist in Plant ' p_frmplt
INTO itab_barcode-text SEPARATED BY space.
MOVE-CORRESPONDING itab_barcode TO itab_log.
APPEND itab_log.
MODIFY itab_barcode TRANSPORTING text.
CONTINUE.
ENDIF.
ENDLOOP.
ENDFORM. " F_VALIDATE_DATA
*& Form F_WRITE_LOG
text
FORM f_write_log .
LOOP AT itab_log.
WRITE :/ itab_log-text.
ENDLOOP.
LOOP AT itab_log1.
WRITE :/ itab_log1-text1.
ENDLOOP.
ENDFORM. " F_WRITE_LOG
*& Form f_prized_data
text
--> p1 text
<-- p2 text
FORM f_prized_data.
DATA: ld_lines LIKE sy-tabix,
ld_sw TYPE i,
lh_loop TYPE i,
ld_recno TYPE i,
lremain TYPE i,
ld_total TYPE i,
ld_counter LIKE sy-index,
ld_counter TYPE i,
ld_save LIKE sy-index,
ld_last TYPE i,
sc_counter(2) TYPE n,
ld_budat(10),
ld_bldat(10).
DATA: wa_matnr(40) TYPE c,
wa_bwtar(40) TYPE c,
wa_erfme(40) TYPE c,
wa_charg(40) TYPE c.
WRITE: p_budat TO ld_budat,
p_bldat TO ld_bldat.
ld_recno = 300. " Number of records in the upload file.
ld_last = 0.
Open BDC session.
PERFORM open_group.
DESCRIBE TABLE itab_barcode LINES ld_lines.
CLEAR: lh_loop, lremain.
lh_loop = ld_lines DIV ld_recno.
lremain = ld_lines MOD ld_recno.
IF lremain > 0.
lh_loop = lh_loop + 1.
ENDIF.
ld_sw = 1.
LOOP AT itab_barcode.
ADD 1 TO ld_counter.
ADD 1 TO sc_counter.
ADD 1 TO ld_total. " Check for 300
IF ld_sw = 1.
Header data.
PERFORM open_group.
PERFORM bdc_dynpro USING 'SAPLMIGO' '0001'.
PERFORM bdc_field
USING 'BDC_OKCODE' '=MIGO_OK_ACTION'.
PERFORM bdc_field
USING 'BDC_CURSOR' 'GODYNPRO-ACTION'.
PERFORM bdc_field USING 'GODYNPRO-
ACTION' 'A01'.
PERFORM bdc_field USING 'GODYNPRO-
REFDOC' 'R02'.
PERFORM bdc_dynpro USING 'SAPLMIGO' '0001'.
PERFORM bdc_field
USING 'BDC_OKCODE' '=OK_GO'.
PERFORM bdc_field USING 'GODYNPRO-
ACTION' 'A01'.
PERFORM bdc_field USING 'GODYNPRO-
REFDOC' 'R08'.
PERFORM bdc_field USING 'GODEFAULT_TV-
BWART' '101'.
PERFORM bdc_field
USING 'BDC_CURSOR' 'GODYNPRO-
ORDER_NUMBER'.
PERFORM bdc_field USING 'GOHEAD-
BLDAT' ld_bldat.
PERFORM bdc_field USING 'GOHEAD-
BUDAT' ld_budat.
PERFORM bdc_field USING 'GOHEAD-
XNAPR' 'X'.
PERFORM bdc_dynpro USING 'SAPLMIGO' '0001'.
PERFORM bdc_field
USING 'BDC_OKCODE' '=MIGO_OK_DETAIL_OP
EN'.
PERFORM bdc_field USING 'GODYNPRO-
ACTION' 'A01'.
PERFORM bdc_field USING 'GODYNPRO-
REFDOC' 'R08'.
PERFORM bdc_field USING 'GODEFAULT_TV-
BWART' '101'.
PERFORM bdc_field
USING 'BDC_CURSOR' 'GODYNPRO-
ORDER_NUMBER'.
PERFORM bdc_field USING 'GOHEAD-
BLDAT' ld_bldat.
PERFORM bdc_field USING 'GOHEAD-
BUDAT' ld_budat.
PERFORM bdc_field USING 'GOHEAD-
XNAPR' 'X'.
PERFORM bdc_dynpro USING 'SAPLMIGO' '0001'.
PERFORM bdc_field
USING 'BDC_OKCODE' '=OK_GO'.
PERFORM bdc_field USING 'GODYNPRO-
ACTION' 'A01'.
PERFORM bdc_field USING 'GODYNPRO-
REFDOC' 'R08'.
PERFORM bdc_field USING 'GODEFAULT_TV-
BWART' '101'.
PERFORM bdc_field
USING 'BDC_CURSOR' 'GODYNPRO-
ORDER_NUMBER'.
PERFORM bdc_field USING 'GODYNPRO-
ORDER_NUMBER' itab_barcode-m_prod_ord.
PERFORM bdc_field USING 'GOHEAD-
BLDAT' ld_bldat.
PERFORM bdc_field USING 'GOHEAD-
BUDAT' ld_budat.
PERFORM bdc_field USING 'GOHEAD-
XNAPR' 'X'.
PERFORM bdc_dynpro USING 'SAPLMIGO' '0001'.
PERFORM bdc_field
USING 'BDC_OKCODE' '=MIGO_OK_LINE_CLIC
K'.
PERFORM bdc_field USING 'GODEFAULT_TV-
BWART' '101'.
PERFORM bdc_field USING 'GOHEAD-
BLDAT' ld_bldat.
PERFORM bdc_field USING 'GOHEAD-
BUDAT' ld_budat.
PERFORM bdc_field USING 'GOHEAD-
XNAPR' 'X'.
PERFORM bdc_field USING 'GOHEAD-
WEVER' '3'.
PERFORM bdc_field
USING 'BDC_CURSOR' 'GOITEM-ZEILE(01)'.
PERFORM bdc_field USING 'GODYNPRO-
DETAIL_ZEILE' ' 1'.
PERFORM bdc_field USING 'GOITEM-
ERFME' 'KG'.
PERFORM bdc_field USING 'GOITEM-
BWART' '101'.
PERFORM bdc_dynpro USING 'SAPLMIGO' '0001'.
PERFORM bdc_field
USING 'BDC_OKCODE' '=MIGO_OK_SPLIT_QUA
N'.
PERFORM bdc_field USING 'GODEFAULT_TV-
BWART' '101'.
PERFORM bdc_field USING 'GOHEAD-
BLDAT' ld_bldat.
PERFORM bdc_field USING 'GOHEAD-
BUDAT' ld_budat.
PERFORM bdc_field USING 'GOHEAD-
XNAPR' 'X'.
PERFORM bdc_field USING 'GOHEAD-
WEVER' '3'.
PERFORM bdc_field
USING 'BDC_CURSOR' 'GOITEM-ZEILE(01)'.
PERFORM bdc_field USING 'GODYNPRO-
DETAIL_ZEILE' ' 1'.
PERFORM bdc_field USING 'GOITEM-
ERFME' 'KG'.
PERFORM bdc_field USING 'GOITEM-
MIGO_ELIKZ' '1'.
PERFORM bdc_field USING 'GOITEM-
BWART' '101'.
ld_sw = 0.
ENDIF.
IF sc_counter = 16.
CLEAR sc_counter.
PERFORM bdc_field USING 'BDC_OKCODE' 'DOWN'.
PERFORM bdc_field
USING 'BDC_OKCODE' '/00'.
add 2 to sc_counter.
ELSE.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
ENDIF.
CLEAR wa_matnr.
CONCATENATE 'GOSPLIT-ERFMG(' sc_counter ')' INTO wa_matnr.
CLEAR wa_bwtar.
CONCATENATE 'GOSPLIT-CHARG(' sc_counter ')' INTO wa_bwtar.
PERFORM bdc_dynpro USING 'SAPLMIGO' '1000'.
PERFORM bdc_field
USING 'BDC_OKCODE' '=OK_SP_CH'.
PERFORM bdc_field
USING 'BDC_CURSOR' 'GOSPLIT-CHARG
(sc_counter)'.
PERFORM bdc_field USING wa_matnr itab_barcode-
m_gross_wt.
PERFORM bdc_field USING wa_bwtar itab_barcode-
m_batch_no.
PERFORM bdc_field
USING 'BDC_CURSOR' 'GOSPLIT-CHARG
(sc_counter)'.
*When end of itab
AT LAST.
PERFORM bdc_dynpro USING 'SAPLMIGO' '1000'.
PERFORM bdc_field
USING 'BDC_OKCODE' '=OK_GOON'.
PERFORM bdc_field
USING 'BDC_CURSOR' 'GOSPLIT-CHARG
(sc_counter)'.
PERFORM bdc_dynpro USING 'SAPLMIGO' '0001'.
PERFORM bdc_field
USING 'BDC_OKCODE' '=MIGO_OK_NEXT_IT'.
PERFORM bdc_field USING 'GODEFAULT_TV-
BWART' '101'.
PERFORM bdc_field USING 'GOHEAD-
BLDAT' ld_bldat.
PERFORM bdc_field USING 'GOHEAD-
BUDAT' ld_budat.
PERFORM bdc_field USING 'GOHEAD-
XNAPR' 'X'.
PERFORM bdc_field USING 'GOHEAD-
WEVER' '3'.
PERFORM bdc_field
USING 'BDC_CURSOR' 'GOITEM-ZEILE(01)'.
PERFORM bdc_field USING 'GODYNPRO-
DETAIL_ZEILE' ' 1'.
PERFORM bdc_field USING 'GOITEM-
ERFME' 'KG'.
PERFORM bdc_field USING 'GOITEM-
MIGO_ELIKZ' '1'.
PERFORM bdc_field USING 'GOITEM-
BWART' '101'.
PERFORM bdc_dynpro USING 'SAPLMIGO' '0001'.
PERFORM bdc_field
USING 'BDC_OKCODE' '=MIGO_OK_TAKE_VALU
E'.
PERFORM bdc_field USING 'GODEFAULT_TV-
BWART' '101'.
PERFORM bdc_field USING 'GOHEAD-
BLDAT' ld_bldat.
PERFORM bdc_field USING 'GOHEAD-
BUDAT' ld_budat.
PERFORM bdc_field USING 'GOHEAD-
XNAPR' 'X'.
PERFORM bdc_field
USING 'BDC_CURSOR' 'GOITEM-TAKE_IT
(01)'.
PERFORM bdc_field USING 'GOITEM-TAKE_IT
(01)' 'X'.
PERFORM bdc_field USING 'GODYNPRO-
DETAIL_ZEILE' ' 1'.
PERFORM bdc_field USING 'GOITEM-
ERFME' 'KG'.
PERFORM bdc_field USING 'GOITEM-
MIGO_ELIKZ' '1'.
PERFORM bdc_field USING 'GOITEM-
BWART' '101'.
PERFORM bdc_dynpro USING 'SAPLMIGO' '0001'.
PERFORM bdc_field
USING 'BDC_OKCODE' '=OK_CHECK'.
PERFORM bdc_field USING 'GODEFAULT_TV-
BWART' '101'.
PERFORM bdc_field USING 'GOHEAD-
BLDAT' ld_bldat.
PERFORM bdc_field USING 'GOHEAD-
BUDAT' ld_budat.
PERFORM bdc_field USING 'GOHEAD-
XNAPR' 'X'.
PERFORM bdc_field
USING 'BDC_CURSOR' 'GOITEM-TAKE_IT
(01)'.
PERFORM bdc_field USING 'GODYNPRO-
DETAIL_ZEILE' ' 1'.
PERFORM bdc_field USING 'GOITEM-
ERFME' 'KG'.
PERFORM bdc_field USING 'GOITEM-
MIGO_ELIKZ' '1'.
PERFORM bdc_field USING 'GOITEM-
BWART' '101'.
PERFORM bdc_field USING 'GODYNPRO-
DETAIL_TAKE' 'X'.
PERFORM bdc_dynpro USING 'SAPMSSY0' '0120'.
PERFORM bdc_field
USING 'BDC_OKCODE' '=&ONT'.
PERFORM bdc_dynpro USING 'SAPLMIGO' '0001'.
PERFORM bdc_field
USING 'BDC_OKCODE' '=OK_POST1'.
PERFORM bdc_field USING 'GODEFAULT_TV-
BWART' '101'.
PERFORM bdc_field USING 'GOHEAD-
BLDAT' ld_bldat.
PERFORM bdc_field USING 'GOHEAD-
BUDAT' ld_budat.
PERFORM bdc_field USING 'GOHEAD-
XNAPR' 'X'.
PERFORM bdc_field
USING 'BDC_CURSOR' 'GOITEM-TAKE_IT
(01)'.
PERFORM bdc_field USING 'GODYNPRO-
DETAIL_ZEILE' ' 1'.
PERFORM bdc_field USING 'GOITEM-
ERFME' 'KG'.
PERFORM bdc_field USING 'GOITEM-
MIGO_ELIKZ' '1'.
PERFORM bdc_field USING 'GOITEM-
BWART' '101'.
PERFORM bdc_field USING 'GODYNPRO-
DETAIL_TAKE' 'X'.
PERFORM bdc_transaction USING 'MIGO_GO'.
ENDAT.
ENDLOOP.
PERFORM close_group.
ENDFORM. "f_prized_data

Hi
Thanks Peram for your swift reply but I am a newbie to BAPIs ...... is there anyway i can do this from within the code i had written ....
for BAPIs I have to do R & D in detail and I need to complete this urgently. If BAPI is the only solution kindly provide my some quick guideline to proceed.
Thanks,
Imran

Transaction code for maintenance view

Hi all
I created a maintenance view and I also generated the table maintenance dailog for the view.Now I am changing the values using the transaction code SM30.But I have to create a transaction code for this maintenance view to access it and update the table instead of using sm30 for this purpose.Please help me.
Thank You.
Regards
Giri.

Hi
create transaction using 'se93'
select parameter transaction and give below attributes
Transaction code ZTX1
Transaction text Maintain View ZSDCZTVIEW
Transaction SM30 Screen 0
From module pool
Name of screen field Value
VIEWNAME = ZSDCZTVIEW
UPDATE = X
Thanks

Use of transaction code IP30

Similar Messages

Maybe you are looking for