Use other partition for rendering while exporting new animation

I am using motion 5 on a partition already kind of full. There is 5 Go left. Which is way enough for my 30 seconds project. But here is the problem, when i export the animation, it cannot complete the task because my hard drive is then full : to export the movie it use my 5go of free space even if the animation at the end will only be few Mo. So I would like in the preferences make sure hat Motion is using I guess this temporary folder to render and export my movie using a partition with more than 100 Go that I have on my computer.
Thanks if you know how to do !

All hard drives and partitions on any computer needs at least 10-15% of its total capacity left as free space, or you're asking for trouble eventually.
When you export from Motion, you can specify where you want to export to. I'm not sure what the issue is. Unless you're seeing the collapsed Save window. Click the disclosure triangle button to the right of the field where you type in the file name.

Similar Messages

Have not used my itunes for a while and have found all my music has disappeared.

I haven't used my Itunes for a while but tried today to find all my music has disappeared. How do I get it back and what has happened to it???

iTunes: Finding lost media and downloads - http://support.apple.com/kb/TS1408
The easiest way to get back missing items? Restore your whole hard drive with all your irreplaceable things like photos in about 20 minutes from the backup clone you make on a regular basis.
Downloading (using iOS or computer) past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not all media formats are available in all countries (see: iTunes in the Cloud, iTunes Match, and iTunes Radio availability by country - http://support.apple.com/kb/HT5085); apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Downloading previously purchased movies and TV shows requires iTunes 10.6 or later. Discontinued items not available. For items not included in the iCloud list (e.g., ringtones, audiobooks), or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid. Apple recommends, "You always back up your iTunes library in the event that a purchased item is no longer available on the iTunes Store," (http://support.apple.com/kb/ht2519).
Additional tip at https://discussions.apple.com/message/24176756

How to use recovery partition for installing OS

hello,
i tried a lot to recover my os with lenove own button for system restore but it did't work and finaly i install OS XP Professional and manualy install all drivers. i must wanna say to lenove mangment that their this way is absolut more complicated then simply provide lenove customer backup cd with laptop. even when i call lenove help line for backup system cd then they demanded money for the cd eigther it must b free for lenove customer as lenove system restore button and partition whole typoligy seems to be total failur. If some one here plz give me advise what should i do with that partition of my hard drive which having system backup from lenove. i make 3 partition of my hdd with i did't remove that partition... so now i want to know that can i still use that partition for system restore or i should remove that partition to make my hdd space free
Thanx 4 reading
Mehr

I had the same problem. I hate Lenovo. I will not buy an another lenovo in my lifetime again. I paid for the OS, then when i call customer care, they ask me for money. Guys look at Dell. I had the system for 7 yrs, i had the OS that i purchased with my laptop. I am loving Dell. Lenovo , your process is wrong.

How do you transfer the content from an iPhone to a PC? I have to use a PC for a while and don't know how to put my stuff on to there from my phone

How do you transfer the content from an iPhone to a PC? I have to use a PC for a while and don't know how to put my stuff on to there from my phone

If you're talking about music and movies an i-device was not designed for unique storage of media. It is not a backup device and media transfer was planned with you maintaining a master copy of your media on a computer which is itself properly backed up against loss. Syncing music and movies is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchases which can be transferred from a device to a computer.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only purchases from iTunes Store
For transferring other items from an i-device to a computer you will have to use third party commercial software. See this document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991

I am having strange issue with my apple tv...i set up pictures to scroll through to the tv using home sharing. Now album covers are interspersed with my pictures. I have been using apple tv for a while and never had this happen before

I am having strange issue with my apple tv...i set up pictures to scroll through to the tv using home sharing. Now album covers are interspersed with my pictures. I have been using apple tv for a while and never had this happen before

Are you watching this content though iCloud or though from iTunes on your local computer? If it is from iCloud have you tried downloading the content to iTunes and watching it on ATV from that source to see if it still happens? This is geerally a much more reliable way to view the content. Easer to fast forward and rewind too.
- I have a stable internet connection
Clearlly you don't
>(Ive tested on other devices)
Which does not tell you anything about the specific connnection from ATV to iCloud.
>I am able to stream Netflix problem free from my AppleTV without so much as a hicup
Again which does not tell you anything about the specific connnection from ATV to iCloud.
>- I am able to download the episodes to my phone, ipad, and computer without any issues
Again which does not tell you anything about the specific connnection from ATV to iCloud. It does remove your ISP throattly traffice as a possible cause though. So that is good.
Have you checked your wireless rounter? Tried doing the factory restor on it? Upgrading it's firmware? Is it and or ATV getting extreamly hot when this problme happens?

Use another partition for Home directory?

I upgraded my Power Mac G5 to Leopard and it recognized that I use a separate partition for my home directory. My MacBook didn't have enough space on my system partition to upgrade, so I did a clean install. Now I'm stuck using a home directory on the system partition- NetInfo manager does not exist in Leopard to allow this change and I want to use another partition for my home directory. How do I change this?

Use the 'ln -s' command in the Terminal, which is in the /Applications/Utilities/ folder, to create a symbolic link to the desired location of your home folder, and put it where your current home folder is. The l in the command is a lowercase L; to see instructions for it, run 'man ls'.
(25389)

The Wifi storage options are interesting but it seems they only allow to read files from the device on the iPad but not transfer files to the storage device via WiFi. I'm looking for a possibility to use the iPad for photography while traveling, without

the Wifi storage options are interesting but it seems they only allow to read files from the device on the iPad but not transfer files to the storage device via WiFi.
I'm looking for a possibility to use the iPad for photography while traveling, without the access to a computer.
Shooting photo's in RAW format crates pretty big files that will fill up the iPad's memory pretty fast if you shoot a lot during a (let's say) month long trip.
my idea was to use load the photo's to the iPad so i could view them and sort out any bad ones. then copy them over to the storage device so i can continue using my CF cards for shooting. I have an image thank for copying the photo's directly to the HDD but it would be so sweet to be able to check them on the iPad before hand.
any suggestions?

Check out pogo plug device, it allows you to upload camera roll via wifi.

I am setting up a time machine backup to a external Hard drive. I want to backup by Mac book Pro running OSX 10.8.5. I would like to Partition the disk and use one partition for Time machine backups and the other for my Lightroom backups. How to do this?

I want to create a two partition disk. One partition for time machine, the other for Lightroom backup. Currently Time Machine is using the entire drive and it is doing the intial encryption and is about 29% complete after two days. I've decided that I want to turn encryption off and partition the disk. So I do I start over?

With the external drive attached, open Finder>Applications>Utilities>Disk Utility. Select the external drive from the list in the left side panel of the DU window. In the main window panel, click Partition in the buttons top center of that panel.
Select the number of partitions you want and adjust their sizes.
For the first partition, click to highlight the partition, then select the format, Mac OS Extended (Journaled) and then the partition table as GUID [both of those are the defaults]. Click Apply and it will ask to confirm and erase and format that partion...oh, give the partition a name, like Backup.
Then repeat those steps for the second partition..and remember to name it...something like Lightroom.
Close Disk Utilitty and you are ready to send TM to the one partition, and do your backup of Lightroom to the second partition.

Using one partition for Linux-, Win.-Swap and Win-Tmp atst?

I think I will keep Windows for the first time I'm going to install Arch. I'm looking for a way to set up one single Partition for usage as Swap or /var/tmp under Linux and at the same time as "rather regular" partition (intended to be one to hold the Windows-Swapfile plus the Windows-TMP-Folder) under Windows.
As regards the usage of the partition as /var/tmp under Linux: I don't explicitly wish to retain data which has been dropped in /var/tmp, therefore I don't care whether it gets lost when booting to another OS. Vice versa: There are absolutly no needs to preserve data which has been stored under %TMP% in Windows. Hence, I wouldn't care if those get lost owing to a change from NTFS to ext3.
Can you think of any way to achive something at least similar?

hmmm. Long time. no reply.
Disclaimer: I have no real idea how Linux and Windows swap works, not in any detail anyway. This idea is to be used at your own risk, and after making appropriate backups.
Linux uses a partition type swp by default for swap partitions, changing this to NTFS for windows would be a pain, as you would have to reformat at every boot.
It is possible to use a swap file instead under linux, by mounting a file as swap, I've seen it for Red Hat. It may be less efficient than a swap partition though.
If you did this, on an ext3 partition, and installed the IFS drivers under windows I guess you could then use this partition all the time. You might then need a script to create & delete the swap files needed by each operating system, which would have to be executed by the operating system on boot before mounting the swap.
I can see this falling flat if the IFS drivers don't come up under windows before it tries to mount it's swap file, or if it doesn't like swapping to ext3, or a host of other reasons. The only way to find out is probably to try it... Have fun!
HTH
Jack
Last edited by Jack B (2007-12-16 15:37:04)

Need to use 16GB Ram for Rendering

Hello everyone, i have 2 x 3GB Quad Core 16GB RAM. i am trying to use my full memory or at least 10GB of memory for rendering in After Effects. Any help will be very much appreciated. Whenever i render it shows i am using 3GB of RAM (default), but i really need to use more RAM to have shorter rendering time. please help. thanks

Giuliana,
On Mac OS X, each AE process can use 3.0 GB of RAM. By turning on "Render Multiple Frames Simultaneously" in the Preferences (in CS3 or CS4) AE can start hidden copies of itself to use more processors to render more than one frame at a time.
Each such hidden process can use 3 GB, so with 10 GB of RAM I'd recommend you use only 3 processors. In CS4 you can tell AE only to use 3 processors, in CS3 you have to edit a text file, as outlined here:
ihttp://generalspecialist.com/2007/02/troubleshooting-after-effects-7.asp
When all 8 cores try to render a complex or memory intensive composition with Render Multiple Frames Simultaneously, the application can become memory starved if each process has insufficient memory. If you have less than 2 GB of available RAM per CPU core, your hard drive will be used as temporary RAM which is at least 100 times slower than real RAM.
To remedy this, there is a text preference in the preference file to control the maximum number of cores that Render Multiple Frames Simultaneously will use.
Open the text preference file and look in the ["MP"] section for:
i "MaxNumberOfProcesses" = "0"
"0" is the default setting, which means that all available CPU cores will be used. Calculate how much RAM you have available for After Effects (don't count the RAM used by your operating system.) If you have 8 cores and 8 GB of free RAM, change the setting to "4" so that 4 CPU cores will be used and so they will each receive 2 GB of RAM.
Save the preference file and restart After Effects.
You can find the preference file Adobe After Effects 8.0 Prefs.txt in the directory (on Windows):
i C:\Documents and Settings\XXXYOUR_LOGIN_NAMEXXX\Application Data\Adobe\After Effects\8.0
...or for OS X:
i Users/XXXYOUR_LOGIN_NAMEXXX/Library/Preferences/Adobe/After Effects/8.0/
- Jonas Hummelstrand
http://generalspecialist.com/

How to use RAW partition for Oracle for placing data?

Dear all,
I have installed Oracle on a SUN machine and use database mount point /oracle which is a UFS system.
But now I would like to use RAW partition instead of a UFS system to place Oracle database data...
The installation guide mentions that database mount points have to be prepared before installation, could I just use /dev/rdsk/c0t0d0s5 as database mount points after partitioning c0t0d0s5?
I am attempting to create a tablespace in the above partition... Could any experts tell me if the above works?
Thanks a lot!

kwan,
Raw partion is used to store Oracle data files and not Oracle software. Oracle home is going be in regular file system. More than one file can not share the same raw device.
You create the raw device at the OS level using the OS command. Then create tablespace on Oracle and use the clause DATAFILE 'Raw file Name'
Hope this helps
Best,
G

Using the ipad for coding while travelling (mobile NAS?)

Hi there,
I am aware this sounds a bit cooky; getting a Macbook air is certainly easier, but:
I am looking for input from other people who are using their iPad for coding.
Apps like textastic require internet(/server) access, however sometimes that's neither available nor preferable, e.g. when travelling in foreign countries.
For building lightweight php sites or small CMS based sites, it would be perfect to have some sort of mobile localhost access,
or at least something that doesn't require internet.
Wouldn't it be possible to run a webserver from let's say, a small wireless HDD/NAS?
Don't know any really small options. Any reccomendations?
Another way would be to install lighthttpd via cydia I suppose, but can textastic even access this then?
Any other ideas I am missing?
thx folks!
Phil

Check out pogo plug device, it allows you to upload camera roll via wifi.

My touchpad is not working anymore after using usb mouse for a while

I have been using usb mouse for a couple days now I only can use usb mouse because my touchpad is not working. its like it is disabled or something.
I have asus k55v (windows 8.1)
pleasseeee help !!!!

Check the settings:
Press FN+F9 or hotkey to turn on touchpad.
If the problem persists then enter the BIOS and make sure BIOS is set to default.
S.Sengupta, Windows Entertainment and Connected Home MVP

FCP Studio2 seems to use Graphic card for rendering

Hi,
I've notice that, since i installed FCP Studio2 my displays lag a lot when rendering, exactly like when i render in Motion.
So it seems that FCP Studio2 now uses GPU acceleration.

When I was at NAB, I was told that FCP 6 uses Core Video. This is the same method that Motion uses, which is why FCP 6 "is not compatible with integrated Intel graphics processors (Final Cut Pro requirements page)". I've always had trouble while rendering in FCP 5, but mostly the whole entire computer is slow. I would say it is normal that the display is acting this way with FCP 6. IMHO, just let the machine render, and go get a sandwich, take a walk, play the guitar, or something other than use the computer while it is rendering. That will make the time seem like it's going by faster, since you aren't waiting for the computer to work. Once you get used to transitions and effects, you should find yourself rendering all of those things at the end of the project, instead of one at a time. That way, you will do one or two big renders, and not 50,000 little tiny ones that really eat your time.

Error "No entry in table T589A for P" while creating new Infotype

HI,
I've created a new infotype (9605). All the tables, structures, screens etc. have been created using transaction PM01 successfully. But upon execution of Infotype from PA30, the infotype screen is displayed with the following error:
"No entry in table T589A for P"
Any input will be highly appreciated.
Thank you,
Farooq.

Hi Farooq,
Untill and unless the the field PSYST-IOPER is cleared explicitly in the program MP960500 (in PBO modules), this error should not occur.
Also is this error is coming only for 9605 infotype ? Also is any other info availaible in the error message such as entry in table t589a is not available for which value of OPERA (INS, MOD, DEL, LIS etc) ?
Regards,
Shrinivas

Use other partition for rendering while exporting new animation

Similar Messages

Maybe you are looking for