Use rmic to generate IDL

I have just read <Enterprise JavaBeans Components and CORBA Clients:A Developer Guide>,and it tells me to generate IDL like this
rmic -idl -noValueMethods -classpath %J2EE_HOME%/lib/j2ee.jar:<path_to_ejbinterop_dir>
-d <path_to_where_idl_files_shoule_be_generated> ejbinterop.Logger ejbinterop.LoggerHome
The problem appears.Whatever I input ,it always tells me "Class not Found".
then ,what can i do?
thanks in advance

the command is alright. it has to be a problem of classpath. please check ur classpath thoroughly. try setting the classpath rather than passing -classpath from the command prompt. it doesn't make any difference but this way is better for debugging. To make sure that ur classpath setting is correct, u can also try by any other means whether system can find that class file or not.
good luck!

Similar Messages

Generate IDL from Java Code, Classes, UML, etc?

Hi,
is is possible to generate IDL code from Java Code, Classes, UML, ... using JDeveloper?
I know this is somewhat reverse engeneering, but it would speed up the migration of our existing Java project...
Thanks,
Johan

Hi,
is is possible to generate IDL code from Java Code, Classes, UML, ... using JDeveloper?
I know this is somewhat reverse engeneering, but it would speed up the migration of our existing Java project...Unfortunately it does not. The IDL to Java conversion is handled under the covers by the idl2java.exe included with the database. You might want to search on google for a IDL generator from java source.
java2iiop (another tool) just generates IIOP stubs from classes and interfaces, but I don't think it creates IDL.
Rob

Using SQVI to generate report of open and released delivery schedule lines

All,
I'm using SQVI to generate an excel spreadsheet for some buyers to show open released schedule lines because they are a 1 line item per scheduling agreement company.
I used the logical database MEPOLDB instead of a table joint and pulled fields from EKKO(vendor, SA #,&purchasing group), EKPO(Material Number), EKEH(schedule line type), and EKET(delivery date, scheduled qty,previous qty).
Does this sound like I'll get the results I want on paper as long as I use the right selection criteria, because the report I'm getting isn't quite what I expect? I am unable to identify which lines are authorized to ship vs. trade-off zone, planning, etc. in the report thus far.

Hi Mark,
I have faced same requirement. I am not sure about transporting to TST and PROD. I done by this way.
After generating SQVI program in DEV , I assigned that program to a transaction and tested in DEV. Later i have regenarated SQVI in Production. then I assigned the generated Program to same transaction in DEV. And transported the Tcode assignment of program to Production..
About authorization , if its not sensitive report, BASIS can restrict at transaction level.
Regards,
Ravi.

I want to use the Function Generator VI to send command signals through the NI 7344 motion controller. This will be a closed loop servo valve system. I want to be able to change from say a square wave to a sine wave on the fly. Idea's?

I am going to run tests that require an actuator to move using various types of arbitrary waveforms such as sine or square. The NI 7344 is hooked to the UMI that is going through a driver for a servo valve. The loop is analog and it is closed. I have played with some of the examples but can't get it to work. I have used the function generator VI to generate a signal but I think I am using the wrong input VI to the motion control board. When I use what I have it moves the servo and then stops. It doesn't continually generate the signal.
I would love to use the controls on the function generator vi to control frequency and amplitude ect. Any help or pointer would be helpful. Thank you in advance.

Hello,
I'm not clear on exactly how you want to use the generated data but I'm assuming they will be used as your target points.
There's a built-in example for motion called 'One-Axis Contour Move.vi'. This example demonstrates how to provide your target points as 1-D array. All you need to do is to replace the input array with the output of the function generator. In order to have it run continuously, use a while loop. You can further program your application so that it'll change the waveform on the fly by monitoring the user interface but this might be little little tricky as you will need to reset the move and load the new generated points while keeping track of your current position.
I hope this helps. Let me know if you have further questions regarding this
application.
Best regards,
Yusuf C.
Applications Engineering
National Instruments

Using mathscript to generate multiple digital outputs for switch control

Hello
I am new to this NI LV and a have kind of a basic question. I would like to use Mathscript to generate an array of bolean numbers which will be used to control the Digital I/O lines. I am using NI 6251 USB device and the Mathscript code runs well. But I have a problem using this array to control the Digital output. So I created a simple test programme where I set the DAQ assitant to generate 4 digital outputs(P0.0 ~ P0.3) and it gives error that ".. number of channels in the data does not match the number of channels in the task..." (see attachment) . How can I solve this problem thank you.
Attachments:
K-9.jpg ‏36 KB

looks like you did not initialize all 4 of the elements in the bool array....

Using JarSettings to generate EJB client jar, but supported classes missed

Appreciated for any comments in advance.
I am using @jarSetting to generate EJB client jar file from workshop 9.2. The remote method of EJB has one input parameter that is defined as an interface. The interface is included in client jar, but the implementation of this interface is not.
Please advise how I can add the implementation of this interface to client jar?
Best Regards,
James

Hi James,
I believe the algorithm for creating the client jar is to simply inspect the EJB interfaces using reflection and to include all user defined classes and exceptions that are referenced by the interfaces. In your case, it sounds like a class is not being included because it is not directly referenced by one of the EJB interfaces.
I think the client jar creation algorithm can be described as "best effort" and unfortunately, it does not always end up including all classes needed by the client. I would recommend you add the additional classes manually using the jar tool.
- Matt

Using PHP to generate images in alternate colors

I have a PNG image of a black silhouette graphic with
softened edges against a transparent background.
Can I use PHP to generate this image in alternate colors
(allowing the black graphic to be displayed in a color other than
black)?

AngryCloud posted in macromedia.dreamweaver:
> I have a PNG image of a black silhouette graphic with
softened
> edges against a transparent background.
>
> Can I use PHP to generate this image in alternate colors
> (allowing the black graphic to be displayed in a color
other than
> black)?
I have no experience with this, but I was just poking around
in the GD
references and found a comment on imagefill() that might
help:
http://us.php.net/manual/en/function.imagefill.php
Comment:
http://us.php.net/manual/en/function.imagefill.php#81873
Or you may need to work with some of the other alpha
functions.
Mark A. Boyd
Keep-On-Learnin' :)

Elvis: Is It possible to use the Function Generator and the Oscilloscope simultaneously?

Hi,
We are using the NI Elvis to output a function or a sine wave at a certain frequency and using the oscilloscope on the same board/elvis to read a modified signal. Is this possible? Can we use both the Function Generator and the oscilloscope at the same time? Please help. The oscilloscope would be reading signal from an accelerometer. Thank you in advance. We have no VI as we do not know which to use and if they are possible.

Hi,
There is no problem using the Function Generator and Oscilloscope
at the same time with NI ELVIS. Using the NI ELVIS soft front panels (Start
>> Programs >> National Instruments >> NI ELVIS 3.0 >>
NI ELVIS – see picture attached –‘NI ELVIS soft front panels.JPG’), you can choose
to open more than one instrument at a time. We do this by opening one
instrument, allowing it to begin, and then opening another. We can also program
in LabVIEW using more than one instrument at a time by placing down multiple
Express VI’s taken from the NI ELVIS pallet on the block diagram (see picture
attached – ‘ELVIS Express VI's (LabVIEW).JPG’). One note when doing this,
please see KB 41ODPHX1
for an example of how to program in parallel. If you do not wire the ‘stop’
terminal of the express VI’s, you will get the error described.
David L.
Systems Engineering
National Instruments
Attachments:
ELVIS Express VI's (LabVIEW).JPG ‏74 KB
NI ELVIS soft front panels.JPG ‏56 KB

Generic Populating the XML document using Java Class Generator and Reflection

I am looking for a generic source code in order to convert the data parsed from any tabular text form ( tab delimited for example that maps certain XML Schema created form Database Schema for Oracle.
I know it is possible to generate XML DTD or XSD from Oracle database table schema by XSU utility from XDK. And also it is possible to create Java source files from an XML DTD or XSD by using XML Clas Generator.
I believe there must be some generic code that parses tabular text data and converts them to XML format using above mentioned generated Java source files and may be Java reflection mechanism.
If anyone has any tool or knows any free ware that helps me, I would like to know about it, and I would really appreciate it.

1. Read the XML file into a DMO object, walk the DOM to find the list, insert your new entry as a child, write the DOM back to a file.
2. If the XML is not in a file, but in a string, then you can do the same with string input and output.

Unable to compile using rmic

Hello all
I have successfully compiled files using javac. The path is set, so I just need to open a command prompt and simply type javac AddServerImpl.java and it compiles with out errors. I do not have to specify any path at all.
But when I try to compile using rmic, that is where I have the problem. It simply says "error: Class AddServerImpl$.java not found. 1 error."
I simply don't understand what the problem is. If the path can work with javac <name>, why can't it work with rmic.
I have even tried copying the java files, to where the rmic file is present and then tried running rmic AddServerImpl. But it still does not work. I have even included the following line under the environment variables "setclass path = %classpath%c:\rmiproject\"
A bit desparate of ideas.
Thankyou

If the path can work with javac <name>, why can't it work with rmic.Because javac takes a path to a filename. rmic takes a package-qualified classname. Different strokes.

ERROR WHEN USING JHEADSTART TO GENERATE ADF BUSINESS COMPONENT FROM DESIGNE

Use JDeveloper to generate a ADF Businness component using Jheadstart from
Designer the following error is thrown
oracle.jmig.source.ExtractorException: Caught SQL exception:ORA-01795: maximum number of expressions in a list is
1000
at oracle.jmig.source.designer.DesignerExtractor.extract(DesignerExtractor.java:136
at oracle.jmig.MigrationRunnable.extract(MigrationRunnable.java:349)
at oracle.jmig.MigrationRunnable.migrate(MigrationRunnable.java:183)
at oracle.jmig.MigrationRunnable.run(MigrationRunnable.java:122)
at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:551)
at java.lang.Thread.run(Thread.java:595)

Yes, this is a known issue. We will fix this for the next release.
Having said that, the next release will contain the JHeadstart Forms2ADF generator which directly reads Oracle Forms .fmb files to ADF, without the need to use Oracle Designer, avoiding problems like this alltogether.
Steven Davelaar,
JHeadstart Team.

Using taglibs to generate html select tag

Hello,
I'm using taglibs to generate html select statements like this:
<input:select ... options="<%= optionsMap %> </input:select>
However I would like each option element to be assigned a
"onclick" attribute. Is that possible?
Thanks!

>
<input:select ... options="<%= optionsMap %> </input:select>
Probably u meant ...
<html:select ..>
<html:option value="all">All</html:option>
</html:select>
You cannot add an onclick event on the "option" element. Its an incorrect tag.
However you may add an onClick or rather onChange event of html:select
Cheers
-Rohit

Using a swf generated by Flex from a Flash component

I know you can include and control a swf generated by Flash
within a Flex component. But can you do the inverse? Can you use a
swf generated by Flex within a Flash project/component?
We plan to develop a "core" module that would be used in a
lot of other Flash and Flex components we'll develop in the future.
This core would be a package of classes that could be easily
re-used by the components. There would be nothing visual in it,
only standard classes.
Even if this core would not contain any visual components, we
would like to develop it using Flex since we prefere Flex Builder
to the Flash editor to code and debug.
But I'm not sure if:
1) A core module like this, developped in Flex, could be used
by our Flash components or only by other Flex components?
2) If we use Flex to generated this core, will the resulting
.swf be bigger than if we would have used Flash to develop it?
Since there will be no Flex visual components in it, maybe it will
be as small? Is there a compiler parameter to tell Flex to only
include the minimum things possible in the generated .swf?
Any help or link about this would be really appreciated!
Thanks you in advance!
P.S. I apologize to those aware that this message was also
posted on another Flex related forum, but I received no reply on
it!

try this. for me it has worked.
import flash.net.URLRequest;
import flash.utils.Timer;
var loader:Loader = new Loader();
var timer:Timer;
var myclip:MovieClip;
//load the Flex Component
loader.load(new URLRequest("IS.swf"));
loader.contentLoaderInfo.addEventListener(Event.COMPLETE,
loaderDone);
addChild(loader);
function loaderDone(e:Event) {
timer = new Timer(100);
timer.addEventListener(TimerEvent.TIMER, handleTimer)
timer.start();
function handleTimer(event:TimerEvent):void {
//cast the loader.content into MovieClip to access
currentFrame.
myclip = loader.content as MovieClip;
if (myclip.currentFrame == 2)
however, i need to access properties of IS.mxml..
any data member would work..
or if i could dispatch an event in IS.mxml and catch it in
flash through IS.swf, it would work.
Pls somebody suggest.

How to use wscompile to generate code using a WSDL file?

I am working with JAX-RPC of Java Web Service ver: 1.1. I am intrested in making the WSDL file first and generating Java code from the WSDL file. On the following link:
http://java.sun.com/webservices/docs/1.1/tutorial/doc/JAXRPC6.html#wp80094
it says that wscompile can generate code using a WSDL file..:
<quote>
Table 11-3 wscompile Options
-import : read a WSDL file, generate the service's RMI interface and a template of the class that implements the interface
</quote>
and the wscompile software says this:
<quote>
C:\>wscompile
-import : generate interfaces and value types only
</quote>
can anyone tell me how to generated Java code from a WSDL file. As in, make the WSDL file (e.g. using XMLSpy) and then use that WSDL generate Java code.
Thanks

I'm trying to generate code using wscompile under the struction in JAXRPC_Tutorial.pdf.
I issued the following command:
wscompile.sh -keep -gen:client -f:wsi -verbose config.xml
But I met with the following warning and I cann't find the produced java code, who know why? Thanks in advance!
warning: ignoring SOAP port "EmployeeDBPort": unrecognized transport
warning: Service "EmployeeDatabase" does not contain any usable ports
the config.xml file is:
<?xml version="1.0" encoding="UTF-8"?>
<configuration
xmlns="http://java.sun.com/xml/ns/jax-rpc/ri/config">
<wsdl name="EmployeeDBService"
location="EmployeeDB.wsdl"
packageName="com.sun.xml.rpc.xml.EmployeeDB">
</wsdl>
</configuration>

Button "Position" can't work in sm30 when use Table maintenance generator

Hello guys,
i have created a table and use 'Table Maintenance Generator' to generate the code. When i run sm30 and click the button 'Position', it can not work.
i enter '/h' to debug it and find the value'POSI' is not assigned to ok_code.
Some tables created before are OK. What's the matter with it?
Many Thanks

hello daniel,
there is very possibility that some inconsistency might be occured while generating table maintenance generator. So i would advice u to create ur table maintenance generator once more after deleting the current one.
Reward properly.

Use rmic to generate IDL

Similar Messages

Maybe you are looking for