User Access By Region Wise

Hi,
I have 3 regions. I created user for these three regoins. How I can set the dashboards based on region wise.
Eg: user belongs to xx region should only view xx region data in dash board.
Please guide me in this issue
Thanks
EP

You can set data level security....
For this, go to the administration tools, open your repository there, go to manage-> security.
You'll see your three users, click on one of them (Suppose you click on the user who belongs to "east" region.). Then
click on permissions button. then go to the filters tab. and add the filters you want.
for example,
select a table you want to apply filter on, and add filter as region='East'.
Hope that helps....
Edited by: user9149257 on Mar 1, 2010 10:30 PM

Similar Messages

Restricting Users access to BW Query based on Criteria

Hello ,
Haven't found much help with the security implementation documents , i have been given a objective to create Profiles/roles and which would be used only for reporting on 1 single Cube by users from multiple departments.
Create profile/Roles and provide access to users for Query ZREP_C0_1 .
User belonging to comp_code1 & region4 & plant6 should be able to view only his data and none other even if the user wishes to see Compcode2 & region3 & plant4.
( Reporting with restrictions over the User authorizations on Region/Compcode )
Creating the Role has been the easy as it was just to provide access to the infoarea , cubes, infobjects , query and authorization objects to execute query. However i am stuck on how to proceed further on the above scenario regarding restricting the users.
Your help is much appreciated .
Regards
Raja

Hi Pratheesh,
If you are going to use client authentication in SSL and if client authentication fails since not all users will have client cert provided by you, SSL handshake will not complete and hence no access. But this is a performance impacting option. Restricting access on FW would be a good option.
During the flow of a normal SSL handshake, the server sends its certificate to the client. The client verifies the identity of the server through the certificate. However, the client does not send any identification of its own to the server. When you enable the client authentication feature on the ACE, the ACE requires that the client sends a certificate to the server. The server then verifies the following information on the certificate:
The CA has not revoked the certificate.The certificate signature is valid. The valid period of the certificate is still in effect. A recognized CA issued the certificate.
You can specify the certificate authentication group that the ACE uses during the SSL handshake and enable client authentication on this SSL proxy service by using the authgroup command in SSL proxy configuration mode. The ACE includes the certificates configured in the group with the certificate that you specified for the SSL proxy service
Regards,
Kanwal

Region wise profitablity "Not Assigned Profit Center (s)"

Hi,
In report drill down at Region wise profitablity in BEx "Not Assigned Profit Center (s)" is showing how can this error be solved ?
Thanks and Regards,
Richa

Hi Richa,
I would first check, if the loaded Hierarchy is correct and activated. Then look on the Query which gives the "Not assigned" entry and look which Subregion is not assigned. Check with Source system, because it is a very good possibility, that the assignment is not done there.
Usually: Do not hesitate to assume that BI/BW shows the correct data! Especially if the BI/BW was reliable for some weeks.
If some error like this does show up, first check in the source system. In our environment, about 90% of errors of this kind are due to inexperienced Source system users, or new requirements which were just implemented in the Source system without telling the BI/BW crew.
Kind regards,
Jürgen

Region wise report

Hi BW experts,
Can any one suggest me as per my requirement. the requirement is sales report region wise .
if the user executing north region the north region cities values displaying and but south region cities showing blank under north and there is no hierarchie maintained is it possible in bex level.here shoukd not come under south cities blank valuyes under north region.
region   cities    priamry sales
noth      delhi        200
             noida       300
             gurgaon 400
            hyderbad ....
            bangalore ....
             chennai    ....
Here my requirement is hyderabad,bangalore, chennai should not display under north region. Any one suggest me on this issue.
Regards
Rk

Hi,
One solution would be to restrict each region structure on city names in that region instead of region names.
Is the zero suppression not working? That would be a simpler solution in this case. In case it is not working, and you have set suppression for 'Rows' with 'Active(All Values = 0)', click on ur structure (key figure structure too) and check the Suppress Zero checkbox in display tab.
Please let me know if you need further assistance.
Thanks,
Abhishek.
Edited by: Abhishek Rajan on Nov 6, 2009 11:55 AM

No of users accessing a bex query

HI Bw guys,
we want know no of users accessing our Bex query.Is there any procedure to find out that.Please give the solution for us because we are hurry about this.
Thanks and regards
Sreenivas.

Hi Srinivas,
If your BI Admin Cockpit is Working Fine and getting loaded to 0TCT_MC01 this cube, then goto RSRT and Run this Query
0TCT_MC01/ZQUERY_FRONT_END_OLAP
The Count shows the number of hit for those queries for that month.
Similarly there are queries for day wise also.
Rgds
SVU

Drilldown based on user access rights

Hi
I have a bar chart which displays monthly sales for Region A, Region B.
I would like to know if it is possible to restrict drilldown based on user access rights (I'll get this from database and i know if the user has access or not when clicking, but i don't know how to disable the drill down or stop drilling down when user has no access rights)
Thanks
yesvee
Edited by: yesvee123 on Jun 2, 2010 2:03 PM

Hello Yesvee,
Database security does not exist in CR Designer, only in Trusted Authentication but it doesn't support Row security. You'll have to use one of our other Products to get this feature/functionality.
Call Sales for more info on which Products would be best suited for your needs and pricing.
Thank you
Don

User access more than one application

how can i give user access on more than on apex application

>
Welcome to the forum: please read the FAQ and forum sticky threads (if you haven't done so already), and update your forum profile with a real handle instead of "984229".
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
how can i give user access on more than on apex applicationSee +{thread:id=515240}+ for the basic technique, and these Oracle Magazine articles for extended examples:
<li>Creating Custom Authentication
<li>Build a Menu Framework
Note that APEX has a built-in publish-and-subscribe model. You create a "master" application to contain publishable components like authentication schemes, LOVs and templates. Theme templates are created, maintained and published through this application, and other applications reference the standard templates by subscription from the master application. Changes can be pushed out from the master application to all subscribing applications.

Adobe with User Access Control

I am trying to watch videos which use Flash Player and they
will play if I turn off my User Access Control however, as soon as
I turn it back on, the videos will not play; I do not want to keep
my User Access Control off - is there some solution to this? I was
able to use flash before without turning this off but I could not
tell you what happened other than I added Adobe Reader (registered
version) and an update to my computer.

quote:
Originally posted by:
brohdaw
I am trying to watch videos which use Flash Player and they
will play if I turn off my User Access Control however, as soon as
I turn it back on, the videos will not play; I do not want to keep
my User Access Control off - is there some solution to this? I was
able to use flash before without turning this off but I could not
tell you what happened other than I added Adobe Reader (registered
version) and an update to my computer.
Okay, I followed the steps for another posting...
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=15&catid=194&threadid =1415087&enterthread=y
However, this did not help the problem; I did everything
exactly the way it appears on these instructions however, one part
I had to do differently - where it states to place the
reset_fp10.cmd I also received an administrator error
message:
eExtracting to "C:\Program Files\Windows Resource Kits\Tools\"
Use Path: yes Overlay Files: no
Error: Access is denied.
Cannot create C:\Program Files\Windows Resource
Kits\Tools\reset_fp10.cmd.
Administrative privileges may be required
Therefore, I saved this file to documents and then moved it
to the C:\Program Files\Windows Resource Kits\Tools\ folder.
Everything else followed just the way the details explained they
would so I figured it should have worked.
My main thing is, this is my laptop and I'm the only user so
I should have Admin. privileges without any of this to begin with!
I check my user settings and it is set at "Administrator
Privileges." This is making no sense; I have had this computer
three years and I went through this one other time but I cannot
remember how I fixed it - this time I am being wise and saving
everything in a note however, that's only going to help if I ever
get this issue fixed.
Can anyone help?
also feel free to contact me by an alternate (but checked
more frequently)
[email protected]
Thank you,
Kerri

Can multiple XP users access the same iTunes library?

Because I'm having a REALLY hard time getting that to work at all. I've moved my entire iTunes folder into 'Shared Documents' so that all users should be able to access it and changed the option in iTunes Preferences to the correct 'all users' path, but iTunes still tries to find the info in 'my' (sal's) documents instead of 'all.'
Anyone figure this out, or does it somehow break the EULA and isn't supported? The wife and I just want to use the same library since we're on one computer. Seems silly to not allow a user with admin rights to allow other users access.
Thanks,
Sal
Windows XP

Sal,
As this article in the Apple Knowledge Base explains the trick is to move the iTunes Music folder, not the entire iTunes folder, to "a publicly accessible location" and I believe they mean to suggest C:\Documents and Settings\All Users\Documents\My Music as a good place.
It is important that the iTunes Library files remain in Sal's Documents and Sal's Wife's Documents.

Multiple simutaneously logged in users accessing AFP home directories?

Hi,
Many of our problems are described in this guy's blog:
http://alblue.blogspot.com/2006/08/rantmac-migrating-from-afp-to-nfs.html
The basic capability we want is to have multiple simultaneously logged in users to have access to their AFP mounted home directory, which is configured in a sane, out-of-the box setup using WGM and Server Admin.
Multiple user access could take the form of FUS (fast user switching), or simply allowing a user to SSH into a machine that another user is already logged into and expect to be able to manipulate the contents of her home directory.
From my extensive searches, I have no reason to believe this is currently possible with 10.4 Server and AFP.
(here's the official word from apple: http://docs.info.apple.com/article.html?artnum=25581)
I've read that using NFS home directories will work, though.
I want to believe that Apple has a solution for this by now (it's been almost a year since we first had difficulty), or at least a sanctioned workaround. If Apple doesn't have one, maybe someone else has come up with something clever. I find it hard to believe that more people haven't wanted this capability! (not being able to easily search the discussion boards doesn't help, though...)
Thanks for your help!
Adam

Parallels Issue. Track at http://forum.parallels.com/showthread.php?p=135585

Service Desk User access

Hi Experts,
I want my service desk users login on Solman and they can update Msg status and ther remarks.
so what are auth. object needs on there profile, please suggest.
Can we block users access in such a way , they are not able to do add change on other users issue msg.
bcoz , if i give access on crm_dno_monitor to any user, he may access and process all issue tickets.
Thanks
Andrew

Andree,
Actually we provide variants for crm_dno_monitor.
so they have option of seeing only tickets belonging to themselves only
For e.g create a variant of crm_dno_monitor by choosing mine and then save it and create a ztcode in se93 for the same.
assign this tcode for the user menu to the respective role of the user.
So whn this user logs in and click on the link he sees only mine tickets or tickets belonging to him..he doesnt hav access to crm_dno_monitor.
Pls assign pts.

How to set up reverse proxy to allow user access portal site from internet

Hi all,
I have installed 10g(10.1.2.0.2) AS on same machine(single IP for both mid and infra with different users respectively). there is a DMZ on which windows IIS is working through which we need to redirect the request to application server such that users access portal page from internet (within intranet all URLs are working fine). I have went through technet documentation where i found 3 ways : through this link
http://download.oracle.com/docs/cd/B14099_19/core.1012/b13998/variants.htm
Section 9.2.1.1, "Configuring OracleAS Web Cache as a Reverse Proxy"
Section 9.2.1.2, "Configuring the Oracle HTTP Server as a Reverse Proxy"
Section 9.2.1.3, "Configuring Internet Information Services as a Reverse Proxy"
I am confused to which option to use. Also i went through the metalink document 270160.1
Please help me which option to choose to do this.
Thanks.

Hi Hozy,
May be it's too late, I am thinking to go in the same route for our sap portal access to external customers. Please can you share your experience , like what are the challenges have you faced? what is the complexity? what are all the resources we need to configure this?
I appreciate your feedback.
Thanks
Krish

How to trace an user access

Even if I've got no DBA permission (for example I don't see the v$session table), have I got any way to trace the users accessing the DB? How can I do? I was told about trace but can someone tell me more? I'd like to know the user accessing the DB and the operation that he's launching. Is it possible?
Thanks!

Anything is possible if you have the correct privileges. But then you probably don't have those privileges, and probably for a reason, as you probably also don't have the DBA role for a reason.
If you are to enable trace in a different session, you would need execute access on an Oracle provided package, which differs by version, and of course you assume Oracle never changes, and there is only one version out there: yours.
For a DBA it would be the easiest to grant you the select_catalog_role and the execute_catalog_role.
But then again one would ask why you think you should spy on him, and why you don't cooperate with him and/or try to convince him.
Sybrand Bakker
Senior Oracle DBA

Way to allow the user access to the saved lists of this Z report

We have a Z report that we want to run at midnight each Sunday and then view the output/layout first thing Monday morning. We can schedule the report to run but it appears that the only way we can save the output as a 'file' for later viewing is by using the "Save with ID" option, which puts the output into a SAP 'saved list'.
The problem with this is that it doesn't appear to be possible to access that list from the Z-report - it would appear that you have to go into SQ01 and use the 'saved list' button. This means giving the Z- report user access to SQ01 as well as Z-report, which, for security (SOD) reasons we don't want to do.
We can run the report in foreground with the output option "File store" and save the output as a file to a specified location,. But this option doesn't appear to be available when the report is scheduled as a background job. If this is done, the background job runs but there's no output anywhere, as far as we can tell.
So what want is to run the report in background but with the output option 'File store' or equivalent (i.e. an output stored somewhere that the report user can view). Is this not possible, or have we missed something in setting up the report run?
Or is there a way to allow the user access to the saved lists of this Z report without giving them T-code SQ01?
Thanks

Hi !
I just wonder if the answer from Varishtb below did solve your propblem.
I have exactly the same problem as you. I also want to be able to look at the saved list without using the sq01.
If you solved it I will be grateful to get the solution.
regards Lars
answer:
You can call the infoset query directly from a transaction code. There's
no need to copy it as a 'Z-report' (or as a custom report). In fact,
everytime you're copying an infoset query to a report, you're calling
for problems the next time you face an upgrade. (That is because SAP
changes the internal logic used to handle the infosets queries from
version to version)
We're using some infoset queries and they work fine this way.

Can we access report date wise?

hi all
can we access report date wise if yes then plz guide me?
i made two text items,one for start date and second one for end date in form.if i issue date in these two text items like this
start date: 01/08/2009 End date: 08/08/2009 and after pressing the when_button_pressed and it give me the report up to giving date,is it possible?
plz help me and guide me more
thanks in advance
sarah

hi sir
sir i got an error in the following code
SET_REPORT_OBJECT_PROPERTY(rep, REPORT_OTHER , 'P_START="' || TO_CHAR(:BLOCK.START_DATE, 'DD.MM.YYYY') || '" P_END="'|| TO_CHAR(:BLOCK.END_DATE, 'DD.MM.YYYY') || '"');
here is the error:" to many declaration of 'To_char' match this call"
my table name is date1
and table structure is
name
address
start_date
end_date
and i used this where query WHERE COLUMN BETWEEN TO_DATE(:P_START, 'DD.MM.YYYY') AND TO_DATE(:P_END, 'DD.MM.YYYY') in the form where caluse
i am using u r codes for displaying report which one you posted yesterday
sarah

User Access By Region Wise

Similar Messages

Maybe you are looking for