User and group mapping on IPSEC EZVPN.

Hello,
I set up an ASA5520 vpn gateway for ezvpn. one ACS4.2 server is used to authenticate the vpn user.
there are 4 groups in the vpn configuration. each group has different group policy .
everything is working well.
now, one more requirement arise:
the users should be locked in corresponding group, that means, user A belons group A, so, he can only uses group A's profile.
if he uses group B's profile, the authentication will fail. Even though the group profiles are on same ASA5520, and the user information is correct in ACS.
I'd like to solicit you advice on that feature, is there a way to do that?

If I recall correctly, there is no inheritance of user and group rights in PT, at least not in 5.x. If you give some rights on a specific object/folder to a specific group, then it will be for that object only and none of its children.
You do have a choice of propagating of user rights down the ownership tree however. I.e., if you select a community and set some rights for yourself, it will prompt you if you want to propagate the same permissions down the chain, to all of its children. If you say yes, it will replacepermissions on all its children by creating copies. If you say no, you'll have to go and apply different permissions on each child individually.
Ruslan.

Similar Messages

Example of creating a valid LDAP user and group in the Portal tree

I need to create (via bulk LDIP or API) fresh users AND groups into OID that can be used by Portal. In theory it sounds easy - just create an appropriate LDIF file.
What is the best way to achieve this?
I don't the know the structure that should be used in the LDIF file that would create the correct structure held for all the Portal users and groups in OID.
I've looked through the OID admin and dev guides but am still confused as to what exactly I have to do. It seems that Portal accounts are synchronised by a method called Provisioning.
All I want to do is bulk upload Portal compatible users into the repository.
Can somebody please assist.
Cheers,
John

I have below changes in files
1] In jps-config.xml
-- Added identity store and selected it from drop down in Security Context tab.
2] In weblogic-application.xml
In Security tab --> Role assignment mapped valid-users to principle name.
<security>
<realm-name>myrealm</realm-name>
<security-role-assignment>
<role-name>valid-users</role-name>
<principal-name>DERDev</principal-name>
</security-role-assignment>
</security>
3] Same thing done in weblogic.xml . I do not know the difference between weblogic-application.xml and weblogic.xml configuartion and which will work.
4] Added security role "DERDev" along with the default/automatically added role "valid users"
<security-role>
<role-name>DERDev</role-name>
</security-role>
Still no luck ...... i am missing again ? I referred many links but found not a single document mentioning all steps
Mukesh

Using users and groups from LDAP in ADF application

Hi there,
I'm using WebLogic Server 10.3.5.0 and JDev 11.1.2.3.0.
I configured my WL server to use the users and groups defined in my LDAP server (they display when I select the Users or Groups tab). So this works fine (I think).
Now I want to use 1 group, let's call the group ApplicationGroup, and all it's users to give them access to my ADF Application.
But I can't find proper/up-to-date info about how to do this.
I tried 2 major things:
1) I configured ADF Security to use Authentication and Authorization. Defined an Enterprise Role with the same name as in my WL server (so ApplicationGroup) then defined a
Application Role with a custom name and added the Enterprise Role to it. That Application Role I gave access to all my TF's and Web Pages. When I deploy this, It just doesn't work (Migrate Users and Groups is not checked).
2) Used the Authentication option in the ADF Security and the rest is the same as in 1). This works +-, I can login with all users so the role mapping isn't configured right I guess?
Any help or documentation that could help me?

Since we aren't using EM I had to find an other way. And I found it.
In web.xml ADF Security (I suppose) automaticly adds 'valid-users'. In my weblogic.xml I added my enterprise role as a principal to 'valid-users' and this works for me.
Thanks for the help.

OBIEE+ Where do I assign user and group mappings to the repository objects?

Hi
I'm using the Oracle BI Administration Tool and I'm creating users and groups. Where do I map my users and groups to the repository objects?.
Regards,
Néstor Boscán

Hi,
I was reading your reply for this post. Could you please tell me in which tool you set the User security. I couldn't find Repository Admin in BI Administration tool.
Repository Admin > Manage > Security.
Any help would be appreciated.
Thanks in advance,
Ravi

OID users , users to group mapping took off

Hi,
I do not know how and why the OID users, user to group mapping was taken. I am not able get anything from logs.
Can anyone help?
Thanks a lot!!!

Hi,
I do not know how and why the OID users, user to group mapping was taken. I am not able get anything from logs.
Can anyone help?
Thanks a lot!!!

Webcenter spaces user and group and WLS security realm

I want to configure external ORACLE DB,
I configed the security realm in WLS, and I can see the user and group list in WLS page, But I cant find any of them in webcenter spaces,
and also can not login with those users.
I added a user with WLS, it works well.
do I need to do other configrations?

First you need to create a Administrator for this new identity stores. Weblogic user is not identified now because its not mapped by first authenticator. See Oracle WebCenter Admin Guide, section 28.4.1.1 Granting the WebCenter Spaces Administrator Role Using FusionMiddleware Control. Once you have done this step, do the same steps for other application user. For this you have to give Application role to other user so that they can login and use WebCenter Space.See Oracle WebCenter Admin Guide, Section 28.4.2.1 Granting Application Roles Using Fusion Middleware Control.
After doing above steps, restart WC_Spaces managed server.

LDAP User and Group import

My client has OAM as SSO provider. They want the LDAP Agent to import only users and groups but not the group memberships.
What setting should I Use for LDAP authentication ?

I have below changes in files
1] In jps-config.xml
-- Added identity store and selected it from drop down in Security Context tab.
2] In weblogic-application.xml
In Security tab --> Role assignment mapped valid-users to principle name.
<security>
<realm-name>myrealm</realm-name>
<security-role-assignment>
<role-name>valid-users</role-name>
<principal-name>DERDev</principal-name>
</security-role-assignment>
</security>
3] Same thing done in weblogic.xml . I do not know the difference between weblogic-application.xml and weblogic.xml configuartion and which will work.
4] Added security role "DERDev" along with the default/automatically added role "valid users"
<security-role>
<role-name>DERDev</role-name>
</security-role>
Still no luck ...... i am missing again ? I referred many links but found not a single document mentioning all steps
Mukesh

LDAP user and group configuration in ADF application

Hi All,
I have to use LDAP user and groups in my ADF application. I have configured the LDAP on WLS server successfully and can see all users/groups under tab "User and Groups". I have added the Enterprise Role in jazn-data.xml matching the name of groups. Created Application role in jazn-data.xml and assigned a role of Enterprise Role.
However not added any user in jazn-data.xml. Which i guess not required because it will picked from LDAP.
Now how to configure the JDeveloper to use those users ? What changes need to make in jazn-data.xml ? or in jps-config.xml / web.xml/ weblogic-application.xml
Am i missing nay configuration step. i have referred ADF Security set up - step by step tutorial - quick question but not found useful
I am using JDeveloper 11.1.1.5.
Thanking you all in advance.
Mukesh.

I have below changes in files
1] In jps-config.xml
-- Added identity store and selected it from drop down in Security Context tab.
2] In weblogic-application.xml
In Security tab --> Role assignment mapped valid-users to principle name.
<security>
<realm-name>myrealm</realm-name>
<security-role-assignment>
<role-name>valid-users</role-name>
<principal-name>DERDev</principal-name>
</security-role-assignment>
</security>
3] Same thing done in weblogic.xml . I do not know the difference between weblogic-application.xml and weblogic.xml configuartion and which will work.
4] Added security role "DERDev" along with the default/automatically added role "valid users"
<security-role>
<role-name>DERDev</role-name>
</security-role>
Still no luck ...... i am missing again ? I referred many links but found not a single document mentioning all steps
Mukesh

Hi I do not want iTunes to open up automatically when I turn on my macbook pro. I tried going to System Preferences Users and Groups Login Items and then I took iTunes off the list but it still opens up automatically when I turn on my laptop.

Hi I do not want iTunes to open up automatically when I turn on my macbook pro. I tried going to System Preferences>Users and Groups>Login Items and then I took iTunes off the list but it still opens up automatically when I turn on my laptop. What should I do?

Hi r,
Make sure you close iTunes before shutdown. And you're quite welcome.

I am trying to stop programs from opening automatically when I turn my computer on. I tried system preferences users and groups login items...then I deleted them from the list but it did nothing.

I am trying to stop programs from opening automatically when I turn my computer on. I tried system preferences>users and groups>login items...then I deleted them itunes and emial from the list but it did nothing. They continue to open up every time I turn on my Macbook Pro.

Hi r,
It sounds like you're running Lion?
Have you tried running Verify and/or Repair Disk?
Have you tried running Repair Permissions?
Do you have at least 15% free space available on your HD?

How to change default /Users and /Groups to different Volume?

Users are created in /Volumes/<boot>/Users and groups in /Volumes/<boot>/Groups.
We need these to be created on a different volume, eg., /Volumes/External/Users, and /Volumes/External/Groups.
Setup Assistant correctly put user Backups into */Volumes/External/Shared Items/Backups* and also correctly put web services on /Volumes/External/ServiceData -- we want to do the same for Groups and Users.
Groups are the most critical, as the group needs bulk storage. Users we could leave as is if it can't be done.
How can this be configured? We've read File Server Admin, Open Directory Admin, and Advanced Server admin from http://www.apple.com/server/macosx/resources/documentation.html without finding an answer.
Thanks in advance.

1. Create new folders on the external volume to hold users and groups, but to prevent confusion name them something other than "Users" and "Groups". /Volumes/External/NetUsers and /Volumes/External/NetGroups would be reasonable choices.
2. Share both of these folders (in Server Admin -> server name in sidebar -> File Sharing -> Volumes & Browse modes -> select each folder -> click Share near the top right).
3. Enable both folders for automounting on clients (Server Admin -> server name in sidebar -> File Sharing -> Share Points-> select each folder -> Share Point tab under that -> Enable Automount option) with the default options (Directory: /LDAPv3/127.0.0.1, Protocol: AFP, Use for: User home folders and group folders). Be sure to click Save (not just OK in the dialog).
4. To migrate users, run Workgroup Manager, and change the home location for the users you want to move (select Accounts in the toolbar -> /LDAPv3/127.0.0.1 from the hidden pop-up menu under that -> User icon tab at the left -> select the user(s) you want to change -> Home tab on the right -> select the NetUsers option from the "Where" list). Then, for each user, run this command on the server: "sudo cp -Rp /Users/username /Volumes/External/NetUsers".
5. Similarly, move Group folders in WGM (Accounts -> /LDAP... -> Groups icon on left -> select groups to move -> Group Folder tab on right -> NetGroups in the list). Then, for each group, run "sudo cp -Rp /Groups/groupname /Volumes/External/NetGroups".
6. Test to make sure all is working before deleting the old user and group folders from /Users and /Groups (do NOT delete /Users and /Groups themselves, just the individual folders from under them).

Generate report to show all users and groups in Shared Services in EPM 11x

Hi,
Is there any way to generate a report (like a migration report or job status report) which can be generated through workspace/shared services 11.1.1.3 so that my admin can look at all the users and groups created. Something that I can view and probably print out? Any suggestions?
~Adeeba

Yes, I knew this one. This basically shows me the users and groups assigned specific provision access. Is there any way to view a report that shows which users and groups have access to dimensions of an individual planning application?
~Adeeba

Assigning Roles to Users and Groups

Hi,
We have installed EP 5.0 SP4...with Content Management...we configured the LDAP to Portal......all the users are maintained through LDAP only...the problem is assigning the Role's to user..here in portal how to assign the roles to the users...we are not getting the Role assignment option under Portal Admin TAB..is there any way to configure the roles to User's are Group's.....
it is an urgent assignment for me..help can be appreciated...
sudhir

Sudhir,
You can assign the roles to users and groups as below.
1. Select the System Administration in the top level navigtion
2. Select user administration
3. You can search for a specific user or a group from this iView.
4. Use the edit button to edit the profie of the user or group.
5. Search for the role in the search iView.
6. Add the role to the user of group and save.

Upgraded to 3.1 and lost all users and groups. How do we get them back?

We ran the update to Server 3.1 (from 3.0) on our Mavericks Mac-Mini Server.
Everything had been fine before the update, but now all users and groups have completely disappeared.
The only user we have is the main administrator log-in.
Since we verified that all of our data, wikis, and other items are still in place, it might be easier to just re-create the groups and users (and permission therein).
But, we cannot log into Workgroup Manager, nor can we add users/groups in the Server app (because it is "grayed-out").
Can somebody please provide a suggestion??
We are a small engineering firm with only 5 users, so it's not like this would take all day.
Thanks, Mike

Have you tried
sudo sso_util configure -r REALM_NAME -a diradmin afp
(cf. Lion Server: AFP users unable to authenticate with Kerberos after upgrading)in Apple Support ?
p.

WINDOWS 8.1 - System Tools no longer displaying User and Group Settings after adding a new LOCAL user.

I jumped on my parents computer, which is on a domain. I added a new local user(with my live.com login) and gave it admin status. That's when the trouble began.
The main user profile disappeared. I used the command prompt fix (see other fixes) to add the missing user back into admin. I logged back in, and it set up the account for the first time (WTF?). I cannot access any files from the main account
(that I logged into just fine before to get this debacle started.)
When going to Local Computer Management --> System Tools, my users and groups tool is missing.
I ran lusrmgr.msc only to find out that the most current version of Windows 8.1 and this is what it said "This snapin may not be used with this edition of Windows 8.1. To manage user accounts for this computer, use the User Accounts tool in the
Control Panel." <---- Awesome! (that was sarcasm.)
I have spent over two hours in the User Account tool during the course of this problem only to prove that a picture of a computer is more useful that that "tool".
To anyone reading this ticket, the best advice I can offer you (as long as its not a crucial machine) is to back up what you can gain access to, format your hard-drive and reinstall windows and start over again. I wouldn't recommend reinstalling 8.1,
I would say go back to 7 and wait until 10 comes out. Windows 8 is the new Vista. Good luck!

Hello AhavahOlam,
I can understand your feelings.
If my understanding is right, after adding a new local user in domain-joined Windows 8.1, you can’t open the local users and groups.
Can you still add account by going to Control Panel\User Accounts and Family Safety\User Accounts\Manage Accounts?
As this computer is domain-based, it is recommended to contact the domain administrator to see if the option is blocked.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

User and group mapping on IPSEC EZVPN.

Similar Messages

Maybe you are looking for