User and System Info

Hi All,
How can I find the following information for a SRM System?
Number of Users and Types
Average online response time
Thanks,
Gamad

Hi All,
Thanks for the information.
What transaction can help me find the number of Shopping Cart and other transactions in SRM for a particular period.
Thanks,
Nikhil
Edited by: Gamad on Aug 21, 2008 6:01 AM

Similar Messages

Posibilities of user and system status?

Hi CRM experts,
I've some doubts respect the user and system status configuration.
My client wants to stop the upload process (to R3 site) of a Sales Order document, regarding a specific user status. Then, they want to restore the uploading process regarding into a specific user status different from the firts one.
User Status -             System Status
Status 1 -                Stop uploading process
Status 2 -                Restore the uploading process
I made the following customizing in my status profile (assigned to my Sales Order transaction)
User Status - Transaction Control - Forbidden - Set
Status 1 -     To be distributed -    X -           X
Status 2 -     empty -           empty -           empty
When I save a Sales Order in Status 1, the BDOC is correctly generated and the document is not present in R3 environment. The problem occurs when I modify the Status, from Status 1 to Status 2. The document is in R3 environment (???) but the generated BDOC remains in Yellow light.
Is correct to implement this uploading behaviour regarding a user status like my configuration? May I implement some checks on the upload BADI better?
I need some help in these questions please.
Thanks in advance

Hi,
It might be easier if you could come to a scenario were one specific user status should trigger the distribution. Then you have a direct link between a user status & a system status, meaning that there is no need for additional coding.
If the bdoc remains in intermediate state, then that means there's an error in the queues or a short dump. check transactions smq1 & smq2 and ST22 in both systems.
Michael.

Activity Monitor % User and % System do not add up

Looking at my iMac i7 Activity Monitor/ All Processes/ CPU I find that the % User and % System do not add up to showing the correct % Idle.
For example, a recent screenshot shows % user = 0.81, the % System = 0.41 and % idle shows 61.25. The CPU usage graph show nothing going on and the Process Name list shows nothing unusual.
This constantly changes - sometimes the figures add up to 100% but usually the % Idle can be anywhere from 40% to a correct 98 - 99% based on nothing of any consequence running.
I look at the Activity Monitor on my MacBook and % Idle shows correct addition and a constant 98 - 99%.
What is going on?
Thank you.

This afternoon, it will be an entire week without a crash on my Squeezebox system!
Totally removing Intego VirusBarrier X6 from my main computer (iMac i7) finally lets me enjoy my music again.
The main problem is that X6 does not provide feedback as to what it is doing so the user cannot adjust the settings. In other words, no specific message as to what X6 just prevented.
As a crash can occur anywhere from 10 minutes to 8 hours of play time, hit or miss setting adjustments waste an amazing amount of time. This has been going on for a year with the frequency of crashes escalating.
I had already entered all my music devices on the Trusted List and had set up rules for all the ports that Squeezebox uses. Still crashed.
There is no reason why Logitech and/or Intego engineers cannot provide security setup instructions. Unfortunately, Logitech only shows security help for PCs.
Well the nightmare is over. Amazing what free time I now have.
The next three paragraphs are for Squeezebox owners and may be of some help if you are having problems:
A crash (for me) is defined in many ways. The worst crash is when the Squeezebox device shuts off and only pulling the electric plug will revive it. Another crash shows itself when the next song only plays for about 1 second and goes to the next song endlessly until the device shuts off. The Logitech manual says move the device closer to the wireless point when this happens but if they are connected by ethernet cables, this advice is useless. Another crash is when three units are synced and one of them suddenly is no longer in sync and playing a different song.
Crashes can occur when units are in sync or not in sync. Connected wirelessly or by ethernet. And when a crash occurs, the loud 'crunching' noise that occurs is not kind to the speakers.
BTW, if some devices are in sync, make sure these devices are connected the same way - either all wirelessly or all by ethernet. If you don't, you will experience sound lags of about 1/2 second. A very annoying echo effect.

SAP user licensing - service users and system users

Hello,
In SAP licensing process, will it count service users and system users for the license.
(or licensing occurs only to the dialog users)
In the license agreement , it is not mentioned.
(Mentioned as 500 user license only)
regards,
zerandib.

Hi Zerandib,
This forum is for SAP Business One users only. I think your question is related to R/3. Please close your thread and post on a proper forum.
Thanks,
Gordon

Mismatch in amount of free space, between UI and System Info.

I'm running a 2011 15" MBP, with a 2 TB drive in it, and the UI is indicating that I have about 520 some odd GB left. System Info and Drive Genius indicate about 490 some odd.
I don't foresee this being a huge problem any time soon, but it's bugging me.

Click here and see the note at the bottom of the page.
(120521)

Can I embed C# Email code in .pdf file to send user and system information when it opens on system

I have a pdf on my system. When I opened it it should email the current user account and system information( like IP, Windows login Id). If the system does not have internet it should not show the error.
Is it possible? If so could you suggest a way or provide a link.
Due to security we want this feature.
Your help is appreciated.
Thanks

You could track the user's email login/IP address if you secure the file using DRM (LiveCycle, etc.), but a PDF which sends silent emails containing personal data about a user would be considered a trojan by the vast majority of people.

Siginificance of the user and system variables

What is the significance of user variable and system variable in
windows 2000 environment?
Because I usually set user variable(classpath and path) and system
variable(classpath,path and javahome) after installing j2sdk and
weblogic. But I find out one of my friend just set the user variable and
running the same. I like to know that what the system doing with user variable and
system variable? In system view, what is the difference between the user var
and system var?

Not sure what this has to do with Java, but: The system variables apply to all users. The user variables apply to only the user that set them. Sign on as a different user and see what happens.

Service tickets - User and system status

Hi guys
This is the scenario, there was a complaint raised by our resolver groups saying that they were unable to open any service tickets logged through to them from our Contact Centre Agents. All this happened in a space of 5 hours only
Under the Header Overview of these service tickets, when I view the changes to this document, i saw that every service ticket that was logged user status shows CLOSED and system status shows COMPLETED
Please advise what could have caused this?
Ravi

Hi Arden
Went through a few of those cases and picked up this
The last system status entered shows TO BE DISTRIBUTED - by the Interaction Agent user
Responsible Group deleted - and new value shows the new responsible group
But the time frame bewteen the old value and new value is what concerns me. Theres a gap of about 45 minutes on average from the time the case is logged "open" till the time the case is "in process" by the resolver
But as per the resolver groups, they could not access these cases once they were logged. So it seems these cases were all "locked" basically and could only be access minutes later
Ravi

Can not synchronize the SAP NW UME users and system groups with SSM

We have created a demo enviroment for a client demo.
In SAP NW UME:
1. Create the system group.
2. Asing the goup created to the admin user (pipadmin).
In Administrator's user interface:
3. Acces to Administration > Set System Defaults in order to synchronize user tables. The data informed in the fields are:
SSM Administrator = pipadmin
Cache directory = C:Program FilesSAPSSMInternetPubcache
Global cache setting = Enable
End point = <IP:port>
User name = pipadmin
pasword = ······
cache = Enable
Then we click on syncronize tables (Administration > Set System Defaults). The "Update compled" message is showed but users and application group don't appear in the Administration > Manages Application Groups.
Note: We tried to syncronize yesterday and we recieved the message: restart the SSM Extended listener.

Thank you for your answer Bob.
Yes, I restarted the SSM Extended listener after all the steps.
Do you know if there is another missing step?
Regards,
Santiago

User and System Interface Security by OBPM

Can anybody describe how User security & System interface security are handled in OBPM?
Is it through Spring Security Framework, authentication of participants through Active Directory and LDAP. Secure Web-Services, JDBC, XML, Single Sign On, HTTPS, HTTP POST etc.?

got to command prompt(windows)
cmd>set ORACLE_SID='database_name'
cmd>sqlplus '/ as sysdba'
sqlplus>alter user username identified by password;
you can change any user password by above command using sys as sysdba or / as sysdba.

How to get user and system status for a trade promotion

Hi,
I have to develop a batch program to change user status and system status of all trade promotions which satisfy some criteria. This criteria checks some dates related to trade promotion(like Changed on,Pallett buying, buying horizon dates) also.
I thought of first extracting all external ids from CGPL_PROJECTS table and then run trade promotion query. But how can I get current user & system status and all dates as these can be taken from relations "TPMStatusActiveRel" and "TPMDateRel". I don't know to take data from relations. Please help me with a piece of code.
Thanks.

Hello Shikha,
You can use these relations here, as you are not in the Business Object layer anymore. As far as my understanding is, all the batch programs or reports should be done at the API layer. Try this code, to read the status of the Trade Promotion object.
data: lr_appl_base type ref to CL_CRM_MKTPL_APPL_BASE,
lt_sys_status type CGPL_ISTATUS_TEXT_T.
lr_appl_base ?= CL_CRM_MKTPL_APPL_BASE=>GET_INSTANCE().
" To read system status
call method lr_appl_base->STATUS_READ
exporting
IM_MKTELEMENT_GUID = "your Trade promotion guid
ET_TJ02T = lt_sys_status.
" To read user status
call method lr_appl_base->STATUS_READ_EXTERN
exporting
IM_MKTELEMENT_GUID = "your Trade promotion guid
ET_TJ02T = lt_sys_status1.
To change the user status, use the method STATUS_CHANGE_EXTERN of the same class
To set the system status, use the method STATUS_SET of the same class.
Hope this helps.
Regards,
Vinay

Work order user and system ststus

Hi all,
In plant maintenance work order(iw31) system and user status have to display as a report. I want to know table and
field name for that below status. Please guide me.
CRTD - created
PAPL -
PLAN - planned
APP - approved
REL - realeased
TECO - Technically completed
CLSD - closed
thanks & regards
R. Saravanan

Dear rajendransara ,
along the above post, TJ02T for System Status Text and TJ30T for User Status Text.
Also JEST to know the all the status of the order.
Regards
Sunil
Edited by: sunil gupta on Mar 18, 2010 12:10 PM

Mac loses all users and System Administrator

i work in a professional recording studio and we have had this happen twice in the past week or so. the computer works fine and then we shut it down and restart and then the login screen appears. the computers are supposed to be set to automatically log in. then there is no way to log in. we dont have any passwords set for the computers so normally when we install software we type in the username and hit enter but this is not working for the login screen. we tried logging in as SYSTEM ADMINISTRATOR for the username and password and that doesnt work. we start up from the install disc to change the password but there are no users. not even an admin.
they are powermac G5s. all software is up to date. these computers are never online and all software installed is completly legal. no cracks or viruses.
does anyone know what could have caused this? and how to prevent it?
also is there a mac software comparable to "goback" on the PC? It sets apart a % of the HD to track ALL movement on the HD and if something gets f-d up, you hit the spacebar during boot and pick the day or time when you knew the system worked fine and EVERYTHING goes back to the state it was at that moment (all files, options, settings, everything.) I've tried Carbon Copy Clone, but thats not the same, takes over an hour to 3 to do, plus that hasn't worked very well for me in the past; javalthread errors and \ditto: errors.
these computers have worked fine for the past 9 months now. so we dont know whats going on. any help would be greatly appreciated. sorry for the long post i am trying to be as specific as possible.

if it happend on one machine so far and appears to be related to the PT plugin being moved around, that could be it.
plugin could be associated with certain location within the disk or the OS when it installs originally, when moved around it could generate errors (not being a developer it's just a wild guess)
for ex. some applications check for certain peripherals
and hardware etc. in the background, or extensions may conflict with other sfotware.
if possible, you could try and replicate the same actions on "safe" machine - if it does the same thing, it's a plugin messing things up or conflicting with something.
it would be easy to use external drive with the same software, boot from external drive and replicate the steps.
it is also possible that the OS got corrupted somehow on the machine or the hard drive may have problems, and PT plugin has nothing to do with it and was just coincidental.

Validate the user and system status

hi sap,
i have a requirment where i need to validate
if system status = ( ISTAT = 'I0002' AND " released
ISTAT = 'I0098' AND " create
ISTAT = 'I0119' ). " active
if the system status ( ISTAT = I0119 Which is ACTIVE then
it should CHANGE the user status.
if the system status ( ISTAT = I0002 Which is RELEASED then
It should NOT CHANGE the user status.
if the system status ( ISTAT = I0098 Which is CREATE then
It should NOT CHANGE the user status.
I have and internal table like this but i dont get the data what is the worng can you pls tel me where i went wrong
how do i validate the above formula?
data:begin of wa_itab,
spras TYPE tj02t-spras,
istat TYPE tj02t-istat,
end of wa_itab.
data: sys_itab like standard table of wa_itab.
SELECT spras
istat FROM tj02t
INTO TABLE sys_itab
WHERE spras = 'E'
AND ( istat = 'I0002' AND
ISTAT = 'I0098' AND
ISTAT = 'I0119' ).

Hi ,
Use this.
DATA:BEGIN OF wa_itab,
spras TYPE tj02t-spras,
istat TYPE tj02t-istat,
END OF wa_itab.
DATA: sys_itab LIKE STANDARD TABLE OF wa_itab.
SELECT spras
istat FROM tj02t
INTO TABLE sys_itab
WHERE spras = 'EN'
AND istat in ('I0002','I0098','I0119').
Regards,
Vijay

Hiding Logged User and Password Info in Reports

Hi!
I want to hide the logged user name ,Password and connect string info while calling a report using Web.Show_Document.
Is there any work around available.
I will be grateful.......
Regards
Imran

Hi ,
See the following link...
http://www.oracle.com/technology/products/forms/pdf/10g/frmwebshowdoc_rep.pdf
Simon

User and System Info

Similar Messages

Maybe you are looking for