User assignment with HR replication

We are implementing SRM 7.02 and ECC 6.06.
We have active HR replication of the Org. Structure form ERP system to SRM, but we are not using CUA. We are creating SRM users with SU01 in SRM.
In the pre-productive systems the HR replication worked fine, but the users were not automatically assigned to the central persons, so we did this assingment manually using the transaction PP01 (in SRM), creating the relationship US B208, and assigning the SU01 user to this relationship. In the pre-producitve systems the system ID (infotype 0105, subtype 0001), was not created in HR/ECC and thus not replicated. We also maintained this realipship manually using PP01.
According to the note 550055 the system should create relationships for the users if the SU01 users already exist in the target system, which they didn't becaue they were created after HR replication. However, according to the note that this link should be created if the swithch HRLAX/USRAC is set to value 'X' in the table T77S0. Even if this switch is active in our system, the link between SU01 users and the central persons was not created automatically.
If I understand correctly the proper procedure would be:
1) create SRM users with SU01
2) HR replication with PFAL (assigment of SU01 users happens automatically)
Questions:
1) Can someone confirm if this procedure is correct?
2) What happens if the System ID (infotype 0105, subtype 0001) is not maintained in HR/ECC and thus not replicated ot SRM? Do we have to maintain it manually with PP01 in SRM?
2) What happens if SRM users are created with SU01 after HR replication)? Will the system assign them automatically to the Org. Structure, or we have to do it manually? We have a job active for the upgrade of HR replication.
Best regards,
AJ

Yes
The procedure is correct.
If the mandatory fields are not given it will not allow you to create personal record. The rest of them can be left blank. It will not be a problem.
if u create a su01 user, its not added automatically to the org structure, you have to add them manually. Then run PFAL to replicate.
Hope it helps.
Regards
Bash

Similar Messages

SAP user assigned with roles from HR-ORG incorrectly

Hi All
I have an issue where a SAP user appears to be receiving role assignments from some HR-ORG object erroneously.
I have checked the user's HR positions and organisational assignments and they do not have any roles assigned.
I also checked the job and no roles are assigned there as well.
Where could these roles be coming from if they are not coming from the position or org unit?
User currently has direct role assignments in SU01 except for 3 roles which appear as indirect assignments (HR assignments) in SU01.
Is this is a bug and is there a note to fix it?
Please could someone let me know why this is happening.
Thanks
Ran

Hi Colleen.... Thanks for your email.
Please see below screenshot, it is an Org assignment but single roles also belong to composite roles.
PBS is not meant to be active and PFUD is scheduled as a daily job. CUA is not active here.
User is assigned to a position and org unit but roles are not provisioned via the Org/position. So there is a 0105 mapping, I have checked those positions and org units but no roles are assigned there.
Basis release 731 and level 0005, SP - SAPKB73105.

Hide Top level navigation if user assigned only one role

Hi,
I would like to hide the top level navigation if user assigned with only one role.
I can create role based rule to show desktop using Master rule collection, but is it possible by doing to with role count.
If user has multiple roles show desktop1 else show desktop2

not sure if this possible ,you may check feasibility of creating a application which checks user role count and if role count is = 1 load the Portal url (URL alais) which had TLN iview invisible in the same window else do nothing and load the portal with the desktop which has tln.
Put the application in framewrk page which has TLN visible.
create a URL alias and create a desktop -framework page which dont have TLN ,assign this desktop to this URL alias in rule collection set its priority before user conditions check in rule collection so that it has high priority before user or group check in rule collection.
you can create a poc in sandbox and check if it wiorks?

Guided Procedure: Dynamical User Assignment at Runtime with WD API

Hallo out there,
I'm trying to assign a user to a process role.
I set up my process in that way:
Process as root,
sequential block,
First action with callable Object,
Second action with callable Object,
It looks quite easy.
The callable Objects are embedded WD4J UI's and the data transfer GP Context, etc works fine
I'm still starting the process with the GP Designtime center, not via Webdynpro method (startProcess).
The following codesd snippets are placed in the execute method of the first callable object.
I guess a have to use the runtime methods.. not the designtime methods to assign the users
For example:
In Step 1 - execute Method:
discovering the user for processing step2!
assigning the to the processrole depending for step2!
My Coding in step 1 looks like this:
First step: Getting the user infos:
// Retrieve an IUser instance by a logon ID specified dynamically at runtime.
          IUser userStep1;
          IUser userStep2;
              userStep1 = UMFactory.getUserFactory().getUserByLogonID("user1");
              userStep2 = UMFactory.getUserFactory().getUserByLogonID("user2");
              IGPUserContext userContext;
              IGPUserContext userContext2;
                 userContext = GPContextFactory.getContextManager().createUserContext(userStep1);
              userContext = GPContextFactory.getContextManager().createUserContext(userStep2);
              IGPRuntimeManager rtm = GPProcessFactory.getRuntimeManager();
Now, i want to assign user2 to step2 :
   IGPProcess process = GPProcessFactory.getDesigntimeManager().getActiveTemplate(
                      // by specifying its ID
                      processId,
                      // and the user accessing it
                      userContext);
             // create an empty role assignment list
             IGPProcessRoleInstanceList roles = rtm.createProcessRoleInstanceList();
             // get the process role number
             int rolenum = process.getRoleInfoCount();
             // iterate over the required roles
             for (int i = 0; i < rolenum; i++) {
           msgmr.reportSuccess("Anzahl der gefunden Prozessrollen: " + rolenum);
                // create a new role instance by specifying the role's unique name
                IGPProcessRoleInstance roleInstance = roles. createProcessRoleInstance(process.getRoleInfo(i).getRoleName());
   // add a user to the role instance
                roleInstance.addUser(userStep2);
                // add the new role to the assignment list
                roles.addProcessRoleInstance(roleInstance);
I guess the problem is, that i call the wrong method to assign the user. I need to assign the user with following code snippet...
// dynamically assign a user to a role
rtm.addRuntimeDefinedUserToRole(
                  // process instance
                  prInstance,
                  // role name
                  "Processor",
                  // user that is assigned (IUser)
                  user,
                  // user context (IGPUserContext)
                  userContext);
// dynamically change the user assigned to a role for a particular task
String prInstanceID = prInstance.getID();
rtm.changeTaskProcessor(
                  // process instance ID
                  prInstanceID,
                  // activity instance ID
                  activityInstanceID,
                  // current user (IGPUserContext)
                  currentProcessorContext,
                  // new user (IGPUserContext)
                  newProcessorContext);
Thank you for any hint.

Hi,
Refer this
Re: Adding users to a process role at runtime   method :- addRuntimeDefinedUser

Report to see list of roles with no user assignment

Hi Gurus,
I need to know the transaction/Report where i can see list of roles which doesnt have any user assignment.
Pls help me

HII,
To search for roles with no users assignment u can run a report RSUSR070 AFTER EXECUTING TCODE SA38 in the progran field enter the name of the report and click execute button u get roles by complex selection criteria then scroll down and in the selection according to user assignments select without user assignment then cli ck execute button u will get the roles with no user assigments............
Thanks and regards

Transport roles and analysis authorization with user assigned

Hi expert,
I face with this problem transport roles and analysis authorization with user assigned. When I have created a transport request to move the roles and analysis authorization from development system to test system. I couldnu2019t maintain the user assigned, after transport I have to assigned manually all of user or create a program to fill AGR_USER table or there are other way.
Thanks for your time,
Luis

Hi,
In role administration, you have the following options for transporting roles:
You can download the roles from one system and upload them into another
You can import the role from a remote system using RFC
You can transport the roles with the transport function.
Role upload loads all role data, including authorization data from a file into the SAP system. The user assignments for the role and the generated profiles for the role are exceptions in this case.
Transporting Roles with the Role Transport Function
       1.      Start the role administration function by choosing Tools ® Administration ® User Maintenance ® Role Administration ® Roles (transaction PFCG).
       2.      Enter the role to be transported and choose Transport Role.
The Mass Transport of Roles screen appears. You can control the default settings for the options Also transport single roles for composite roles and Also transport generated profiles for roles using Customizing switches (see Role Administration Functions in the section Functions of the Utilities Menu).
You should not change the authorizations profiles of the role after you have included the role in a transport request. If you need to change the profiles or generate them for the first time, transport the entire role again afterwards.
For more information go thrpugh the below link
http://help.sap.com/saphelp_nw70/helpdata/EN/6d/7c8cfd410ea040aadf92e1f78107a4/content.htm
Regards,
Marasa.

How can the info block be assigned with the view and assign view to users.

Dear Friends,
Anyone could plz tell me how can the info block be assigned with the view and assign view to users. Also how can the info block in sale summary be assigned with a view and how to assign this view for user.
Regards,
Ashima

Hi,
To define view and to make it default
Goto SAP IMG > Sales and Distribution > Sales Support (CAS) > Sales Summary > Define Reporting Views (Tcode:OVCD).
To assign default user to the view.
Goto SAP IMG > Sales and Distribution > Sales Support (CAS) > Sales Summary > Assign Default View To User (Tcode:OVCC).
To assign Elements of SAPScript "SD-SALES-SUMMARY" to information Blocks To A View use
Goto SAP IMG > Sales and Distribution > Sales Support (CAS) > Sales Summary > Assign Information Blocks To A View (Tcode:OVCB).

PERWSHRG form - How to end/terminate and assignment with end dated entered by user Apps R12.1

Hi All.
How to end/terminate and assignment with end dated entered by user Apps R12.1?
when i try to end or terminate and assignemnt the sysdate is begin registered for effective_end date.
any help is reaaly greatly appriciated
thanks and regards
Soni

Hi Soni,
What is the end date you want to enter as. Are you talking about 31-Dec-4712. If not, please change the sytem effective date (calendar icon on the oracle menu) to the date you want to terminate and follow the termination process.
Thanks,
Avinash

Restrict Moving roles with user assignment

Hi There,
Need your help...
How to restrict to move roles from dev->QA with user assignment. (want to disable the user assignment restirction)
Thanks and Regards,
Gnanaprakasam

Unfortunately this is not the default installation setting, so you need to go into the security settings customizing and change the USER_REL_IMPORT switch to 'NO'.
This does however NOT make the checkbox disappear in the transport source system. It prevents the import in the target... so you must set it and transport it there first, then it works.
Cheers,
Julius

Moving roles with user assignment

Hi There,
Need your help...
We have roles and users created in QA for training, now we want to move roles from QA to Production with user assignment.
Users that are created in QA for training have also been created in Production, is it possible to move the roles from QA to Production with the user assignment.
Thanks and Regards,
Azher.

Table PRGN_CUST does'nt contain any entries, its an empy table in QA.
USER_REL_TRANSPORT entry with value NO locks system from TR imports with User assignment. So you have to ensure your target system-Production does not has that entry in PRGN_CUST.
TR is geting created in Local change request which cannot be moved to Production.
This TR request are created in Local Change request only when you do not specify a target system/group . All you need to do is specify the "Target" while creating the TR in PFCG (subsequent screen after you hit Create request) and release your TR via SE10. Once released, the TR would be added to the import queue of Production. You/your Basis team can import it manually via STMS_IMPORT (Extras>Other requests>Add TR and CTRL+F11 to import). If there are any errors please have Basis team to review the transport logs.
P.S: You can only transport direct user assignments of roles via PFCG transport option described in my post. In case of indirect user assignments that were created using Organizational Management (HR-Org), you will have to use transport functionality in Organizational management.
Thanks
Sandipan

Copy few test assignment with User from one database instance to another

Hi,
I have OTL ,Payroll and HRMS system. I want to Copy few test assignment with User(Few FND Users) from one database instance to another .
Source: DEV Instance
OTL users to enter their Time sheet
OTL is intergated with HRMS to pickup Employee information
Existing business users are integrated with Employee assignment etc tables to pickup person_id
Target: Want to copy few test OTL users from ONE instance to another. Bringing FND_User is easy but EMPLOYEE_ID, PERSON_PART_ID will not come during FNDLOADER .
How to bring all information from one instance to another instance? Please advice.
thanks .

Dear,
Try using HRMS configuration workbench. For this you might require support from your DBA for configuring the same. Once configured, you can move the items you want.
Regards,
Kathan

Problem with User Assigned Bundles on Win7 x64, ZCM 10.3.4

Greetings,
We are experiencing an issue with user assigned bundles in our environment. Specifically we are seeing the following problem on some, but not all, workstations running Windows 7 Pro x64 with ZCM 10.3.4. Some users do not get new, user assigned bundles until they log out of ZENworks Adaptive Agent, via the system tray "Z" icon, and then log back in to the agent. A simple refresh does not grab the new user assigned bundles. One has to perform this logout/login routine to get all user assigned bundles. The problem seems to be machine specific. The server shows that the missing bundles are, in fact, properly associated with the user. If the affected user logs onto a different machine, their user assigned bundles populate as expected. Any ideas?
In addition to rebooting our ZCM servers, we performed the following on the affected workstations:
zac unr
zac unr -f
zac cc
zac reg -g
Uninstalled/reinstalled ZENworks Adaptive Agent 10.3.4
Deleted affected user's local machine profile
Repaired CASA installation

Originally Posted by spond
Sirhw1,
what do you see in the zmd-messages.log (set to debug level) when you
do that initial refresh?
Shaun Pond
Shaun,
The following is an excerpt from our zmd-messages.log after doing a refresh-only on an affected machine. This data was generated approximately 2 minutes after performing the refresh. Thanks for your assistance.
[DEBUG] [04/04/2012 11:29:58.579] [3428] [ZenLinuxDaemon] [4523] [] [Sqlite] [] [objInfo.db SqliteCommand.ExecuteReader.prepare returned error: ERROR] [] []
[DEBUG] [04/04/2012 11:29:58.579] [3428] [ZenLinuxDaemon] [4523] [] [Sqlite] [] [(objInfo.db) Throwing sqlite exception from ExecuteReader(sql, want_results, err, errMsg): (select e.id as entryId, e.localPath, d.id as descriptorId, d.name, d.value, d.owner from Entry e, EntryDescriptor d where e.id = d.entryId and e.key='registration:primaryUserInfo' and e.owner='0d6a500efee6a219c74358cb244dc2f1', True, ERROR, )] [] []
[DEBUG] [04/04/2012 11:29:58.580] [3428] [ZenLinuxDaemon] [4523] [] [ZenCache] [] [Sqlite Exception getting object record for key registration:primaryUserInfo on attempt 1
Type: Novell.Zenworks.Cache.Sqlite.SqliteException
Message: Sqlite Error: 1
Stack Trace:
at Novell.Zenworks.Cache.Sqlite.SqliteCommand.Execute Reader (CommandBehavior behavior, Boolean want_results, System.Int32& rows_affected) (0x00000)
at Novell.Zenworks.Cache.Sqlite.SqliteCommand.Execute Reader (CommandBehavior behavior) (0x00000)
at Novell.Zenworks.Cache.Sqlite.SqliteCommand.Execute Reader () (0x00000)
at Novell.Zenworks.Cache.Sqlite.SqliteCommand.System. Data.IDbCommand.ExecuteReader () (0x00000)
at Novell.Zenworks.Cache.SqliteEntryInfoProvider.GetC acheEntry (IDbConnection dbConn, System.String key, Novell.Zenworks.Cache.UserContext owner, System.Type type) (0x00000)
at Novell.Zenworks.Cache.SqliteEntryInfoProvider.GetO bjectEntry (System.String key, Novell.Zenworks.Cache.UserContext owner) (0x00000)
[DEBUG] [04/04/2012 11:29:58.580] [3428] [ZenLinuxDaemon] [4523] [] [ZenCache] [] [Validating dbSchema...] [] []
[DEBUG] [04/04/2012 11:29:58.582] [3428] [ZenLinuxDaemon] [4523] [] [Sqlite] [] [objInfo.db SqliteCommand.ExecuteReader.prepare::ExecuteNonQue ry returned error: ERROR] [] []
[DEBUG] [04/04/2012 11:29:58.582] [3428] [ZenLinuxDaemon] [4523] [] [Sqlite] [] [(objInfo.db) SqliteCommand.ExecuteReader.sqlite3_exec(no_want_r esults) returned error: ERROR] [] []
[DEBUG] [04/04/2012 11:29:58.582] [3428] [ZenLinuxDaemon] [4523] [] [Sqlite] [] [(objInfo.db) Throwing sqlite exception from ExecuteReader(sql, want_results, err, errMsg): (create table Entry (
id integer primary key autoincrement,
key text not null collate nocase,
owner text not null collate nocase,
localPath text not null collate nocase,
unique (key, owner));
create table EntryDescriptor (
id integer primary key autoincrement,
entryId integer not null references FileEntry,
name text not null collate nocase,
value text not null collate nocase,
owner text not null collate nocase,
unique (entryId, name, owner));
, False, ERROR, )] [] []
[DEBUG] [04/04/2012 11:29:58.583] [3428] [ZenLinuxDaemon] [4523] [] [ZenCache] [] [Failed to create cache database file /var/opt/novell/zenworks/zmd/cache/ZenCache/metaData/objInfo.db
Type: Novell.Zenworks.Cache.Sqlite.SqliteException
Message: Sqlite Error: 1
Stack Trace:
at Novell.Zenworks.Cache.Sqlite.SqliteCommand.Execute Reader (CommandBehavior behavior, Boolean want_results, System.Int32& rows_affected) (0x00000)
at Novell.Zenworks.Cache.Sqlite.SqliteCommand.Execute NonQuery () (0x00000)
at Novell.Zenworks.Cache.SqliteEntryInfoProvider.Crea teDatabaseSchema (System.String dbPath, System.String schema) (0x00000)
[DEBUG] [04/04/2012 11:29:58.585] [3428] [ZenLinuxDaemon] [4523] [] [ZenCache] [] [ValidateSchema() returned: True] [] []
[DEBUG] [04/04/2012 11:29:58.585] [3428] [ZenLinuxDaemon] [4523] [] [Sqlite] [] [objInfo.db SqliteCommand.ExecuteReader.prepare returned error: ERROR] [] []
[DEBUG] [04/04/2012 11:29:58.585] [3428] [ZenLinuxDaemon] [4523] [] [Sqlite] [] [(objInfo.db) Throwing sqlite exception from ExecuteReader(sql, want_results, err, errMsg): (select e.id as entryId, e.localPath, d.id as descriptorId, d.name, d.value, d.owner from Entry e, EntryDescriptor d where e.id = d.entryId and e.key='registration:primaryUserInfo' and e.owner='0d6a500efee6a219c74358cb244dc2f1', True, ERROR, )] [] []
[DEBUG] [04/04/2012 11:29:58.586] [3428] [ZenLinuxDaemon] [4523] [] [ZenCache] [] [Sqlite Exception getting object record for key registration:primaryUserInfo on attempt 2
Type: Novell.Zenworks.Cache.Sqlite.SqliteException
Message: Sqlite Error: 1
Stack Trace:
at Novell.Zenworks.Cache.Sqlite.SqliteCommand.Execute Reader (CommandBehavior behavior, Boolean want_results, System.Int32& rows_affected) (0x00000)
at Novell.Zenworks.Cache.Sqlite.SqliteCommand.Execute Reader (CommandBehavior behavior) (0x00000)
at Novell.Zenworks.Cache.Sqlite.SqliteCommand.Execute Reader () (0x00000)
at Novell.Zenworks.Cache.Sqlite.SqliteCommand.System. Data.IDbCommand.ExecuteReader () (0x00000)
at Novell.Zenworks.Cache.SqliteEntryInfoProvider.GetC acheEntry (IDbConnection dbConn, System.String key, Novell.Zenworks.Cache.UserContext owner, System.Type type) (0x00000)
at Novell.Zenworks.Cache.SqliteEntryInfoProvider.GetO bjectEntry (System.String key, Novell.Zenworks.Cache.UserContext owner) (0x00000)
[DEBUG] [04/04/2012 11:29:58.587] [3428] [ZenLinuxDaemon] [4523] [] [Sqlite] [] [objInfo.db SqliteCommand.ExecuteReader.prepare returned error: ERROR] [] []
[DEBUG] [04/04/2012 11:29:58.587] [3428] [ZenLinuxDaemon] [4523] [] [Sqlite] [] [(objInfo.db) Throwing sqlite exception from ExecuteReader(sql, want_results, err, errMsg): (select id from Entry where key='registration:primaryUserInfo' and owner='0d6a500efee6a219c74358cb244dc2f1', True, ERROR, )] [] []
[DEBUG] [04/04/2012 11:29:58.587] [3428] [ZenLinuxDaemon] [4523] [] [ZenCache] [] [Exception getting sqlite entry id for registration:primaryUserInfo
Type: Novell.Zenworks.Cache.Sqlite.SqliteException
Message: Sqlite Error: 1
Stack Trace:
at Novell.Zenworks.Cache.Sqlite.SqliteCommand.Execute Reader (CommandBehavior behavior, Boolean want_results, System.Int32& rows_affected) (0x00000)
at Novell.Zenworks.Cache.Sqlite.SqliteCommand.Execute Reader (CommandBehavior behavior) (0x00000)
at Novell.Zenworks.Cache.Sqlite.SqliteCommand.Execute Reader () (0x00000)
at Novell.Zenworks.Cache.Sqlite.SqliteCommand.Execute Scalar () (0x00000)
at Novell.Zenworks.Cache.SqliteEntryInfoProvider.Look upEntryId (IDbConnection dbConn, System.String key, Novell.Zenworks.Cache.UserContext owner) (0x00000)
[DEBUG] [04/04/2012 11:29:58.588] [3428] [ZenLinuxDaemon] [4523] [] [Sqlite] [] [objInfo.db SqliteCommand.ExecuteReader.prepare::ExecuteNonQue ry returned error: ERROR] [] []
[DEBUG] [04/04/2012 11:29:58.588] [3428] [ZenLinuxDaemon] [4523] [] [Sqlite] [] [(objInfo.db) SqliteCommand.ExecuteReader.sqlite3_exec(no_want_r esults) returned error: ERROR] [] []
[DEBUG] [04/04/2012 11:29:58.588] [3428] [ZenLinuxDaemon] [4523] [] [Sqlite] [] [(objInfo.db) Throwing sqlite exception from ExecuteReader(sql, want_results, err, errMsg): (insert into Entry (key, owner, localPath) values ('registration:primaryUserInfo', '0d6a500efee6a219c74358cb244dc2f1', '/var/opt/novell/zenworks/zmd/cache/ZenCache/11796bbf-b14c-4f6d-9c39-a2f5a487e4b9'), False, ERROR, )] [] []
[DEBUG] [04/04/2012 11:29:58.588] [3428] [ZenLinuxDaemon] [4523] [] [ZenCache] [] [Sqlite Exception putting file record for key registration:primaryUserInfo on attempt 1
Type: Novell.Zenworks.Cache.Sqlite.SqliteException
Message: Sqlite Error: 1
Stack Trace:
at Novell.Zenworks.Cache.Sqlite.SqliteCommand.Execute Reader (CommandBehavior behavior, Boolean want_results, System.Int32& rows_affected) (0x00000)
at Novell.Zenworks.Cache.Sqlite.SqliteCommand.Execute NonQuery () (0x00000)
at Novell.Zenworks.Cache.SqliteEntryInfoProvider.PutC acheEntry (IDbConnection dbConn, IDbTransaction dbTransaction, Novell.Zenworks.Cache.CacheEntry entry) (0x00000)
at Novell.Zenworks.Cache.SqliteEntryInfoProvider.PutO bjectEntry (Novell.Zenworks.Cache.ObjectCacheEntry& objectEntry) (0x00000)
[DEBUG] [04/04/2012 11:29:58.589] [3428] [ZenLinuxDaemon] [4523] [] [ZenCache] [] [Validating dbSchema...] [] []
[DEBUG] [04/04/2012 11:29:58.590] [3428] [ZenLinuxDaemon] [4523] [] [Sqlite] [] [objInfo.db SqliteCommand.ExecuteReader.prepare::ExecuteNonQue ry returned error: ERROR] [] []
[DEBUG] [04/04/2012 11:29:58.590] [3428] [ZenLinuxDaemon] [4523] [] [Sqlite] [] [(objInfo.db) SqliteCommand.ExecuteReader.sqlite3_exec(no_want_r esults) returned error: ERROR] [] []
[DEBUG] [04/04/2012 11:29:58.590] [3428] [ZenLinuxDaemon] [4523] [] [Sqlite] [] [(objInfo.db) Throwing sqlite exception from ExecuteReader(sql, want_results, err, errMsg): (create table Entry (
id integer primary key autoincrement,
key text not null collate nocase,
owner text not null collate nocase,
localPath text not null collate nocase,
unique (key, owner));
create table EntryDescriptor (
id integer primary key autoincrement,
entryId integer not null references FileEntry,
name text not null collate nocase,
value text not null collate nocase,
owner text not null collate nocase,
unique (entryId, name, owner));
, False, ERROR, )] [] []
[DEBUG] [04/04/2012 11:29:58.591] [3428] [ZenLinuxDaemon] [4523] [] [ZenCache] [] [Failed to create cache database file /var/opt/novell/zenworks/zmd/cache/ZenCache/metaData/objInfo.db
Type: Novell.Zenworks.Cache.Sqlite.SqliteException
Message: Sqlite Error: 1
Stack Trace:
at Novell.Zenworks.Cache.Sqlite.SqliteCommand.Execute Reader (CommandBehavior behavior, Boolean want_results, System.Int32& rows_affected) (0x00000)
at Novell.Zenworks.Cache.Sqlite.SqliteCommand.Execute NonQuery () (0x00000)
at Novell.Zenworks.Cache.SqliteEntryInfoProvider.Crea teDatabaseSchema (System.String dbPath, System.String schema) (0x00000)
[DEBUG] [04/04/2012 11:29:58.593] [3428] [ZenLinuxDaemon] [4523] [] [ZenCache] [] [ValidateSchema() returned: True] [] []

Does anyone know how to associate user-assigned keywords with apps so that they can be searched/ filtered based on the keywords?

I have a large number of apps that exceed the capacity of my multiple idevices and I want to be able to create app lists (similar to playlists) so I can change what goes onto my idevices quickly depending on what is going on. Individually picking apps in itunes each time is time-consuming so I was wondering if there was a way to associate tags or user-assigned keywords to apps so they could be filtered/ searched to select the ones I want.

I have a large number of apps that exceed the capacity of my multiple idevices and I want to be able to create app lists (similar to playlists) so I can change what goes onto my idevices quickly depending on what is going on. Individually picking apps in itunes each time is time-consuming so I was wondering if there was a way to associate tags or user-assigned keywords to apps so they could be filtered/ searched to select the ones I want.

NWA 7.1 - User Administration with regards to Roles/Groups

Hello,
Environment = NWA 7.1 , Java Stack Only , No Central User Administration
Situation      = One group of individuals responsible for developing and maintaining Java Roles & Groups
                      (Permissions). Another group of individuals responsible for maintaining Users and
                      allocating the above Roles & Groups to the Users.
In accordance with various documentation (ie. http://help.sap.com/saphelp_nwpi711/helpdata/en/4a/e06f429c789041e10000000a1550b0/frameset.htm) I have set up a Role which includes the actions: UME.Manage_Roles, UME.Manage_Groups, UME.Manage_Users, UME.Manage_All_User_Passwords & UME.Read_All. This Role is intended for the second group of individual mentioned above.
The problem is however that with the mentioned actions they can not only allocate an user to a Role or Group but also delete the Role/Group from the system. Without the above actions in the Role it is not possible to assign Users to a Role/Group.
This leads me to the question if it is possible to split these two various areas of responibility or does NWA 7.1 view both activities as residing in only group (documentation to this effect would be helpful). If not, which actions will ensure that only Users can be administered but the rights to the system (Roles/Groups) can not be tampered with.
Many thanks in advance,
Jay

Hi Jay,
UME.Manage_All Provides permissions required by an overall user administrator.
These include:
u2022 Administration of users belonging to any company and
possibility of assigning users to companies
(In a multitenant portal, even if a tenant user is assigned this
action, he or she will still only have access to users, groups,
and roles in his or her tenant.)
u2022 Group management
u2022 Role assignment
u2022 User mapping
u2022 Import and export of user data
u2022 Manual replication of user data
To set up delegated user administration, overall user administrators
must belong to a role to which the UME.Manage_All action is
assigned.
In portal installations, any role that includes the UME.Manage_All
action automatically has Role Assigner permissions on all portal roles in the portal installation.
Try this.
Regards,
Gowrinadh

OIM 9.1.0.2: Remove user assigned to a task in Provisioning Process

I have read Note: Ability to Have Multiple Approvers Per Resource Object in OIM [ID 429999.1], and executed each steps described in it. But when grant these resource object to some user. First the request was not sended directly to a approval process, as had been expected that I would. The request was send to a provisioning process, specifically to user has been assigned a task, when the user approves the request until the request is then sent to approval process.
I need to send directly to a approval process, because that's where I have defined my levels of approval.
I'm using oim 9.1.0.2 BP18 running on OC4J 10.1.3.5 on AIX 6.1 64-bit clustered install with two nodes, Oracle Database 10.2.0.4 on AIX 6.1 64-bit on RAC.

Hello Everyone,
Thanks for your response. Actually i have a Approval Process, where i have defined my levels of approvals. In Resume I have this Env. :
1.- A Resource: ResourceA
2.- A Provisioning Process in relation with ResourceA.
3.- A Approval Process in relation with ResourceA.
The request was send to a provisioning process, specifically to user has been assigned a task, when the user approves the request until the request is then sent to approval process.
I need to send directly to a approval process, because that's where I have defined my levels of approval. In other words i need to bypass the user assigned a task in provisioning process.

User assignment with HR replication

Similar Messages

Maybe you are looking for