User defined delivery filters?

I'm wondering if it is possible with OS X's mail server (IMAP) to set delivery filters (ie: a message from bob to sue goes into Sue's self-creating folder called 'Messages from Bob' rather than into her inbox).
I know that you can setup filters on machine itself, but these seem to be on a per-machine basis and not retained server-side. I'd like to know how users can make and retain them server side.
Thanks

You can use sieve.
The simplest way is to install the avelsieve plugin for SquirrelMail. It will allow users to define their server side rules.
HTH,
Alex

Similar Messages

User defined Field refresh during copying Sales Quotation in SO

Dear Colleagues,
We are doing an implementation of B1 2004A PL14. We have defined a few user defined fields (Select fields) and using them in Quotation, SO and Delivery. Now,
when we create a Quotation and select a value from user-defined selection and then copy this Quotation in SO to create a SO the field value shows up for fraction of second and then clears itself and becomes blank. For some of the fields its working and for others its not even though all of them are defined in the same way.
This is delaying our go-live. It will be great if we get some suggestions on this.
Thanks & Regards,
Manish

Hi Manish,
Unfortunately I don't know what might cause your problems.
I would highly recommend to involve SAP Support to get your problem fixed.
Sorry,
Frank

Creating a user-defined field in VL06

Dear all ,
Please guide me how to add few user defined fields in the output list of standard VL06 transaction code - (Delivery Monitor Report - WS_DELIVERY_MONITOR) - I have to add in the option of 'List Outbound deliveries' -
Pls revert.
Thanks in Advance.
P.G.R

Hai
Follow the bellow steps for creating User Defined Field Exit
Step by step procedure for creating Field Exits
There are eight steps to creating a field exit:
Step 1: Determine Data Element
Step 2: Go To Field Exit Transaction
Step 3: Create Field Exit
Step 4: Create Function Module
Step 5: Code Function Module
Step 6: Activate Function Module
Step 7: Assign Program/Screen
Step 8: Activate Field Exit
Step 1: Determine Data Element
- Before you can begin adding the functionality for a field exit, you must know the corresponding data element.
- An easy way to determine the data element associated to a particular screen field is to:
Go the appropriate screen.
Position the cursor in the appropriate field.
Press F1 for field-level help.
Click on the Technical info pushbutton (or press F9) on the help dialog box.
On this Technical Information dialog box, the data element will be specified if the field is 'painted' from the ABAP/4 Dictionary.
Step 2: Go To Field Exit Transaction
- The transaction to create field exits is CMOD.
- You can use the menu path Tools -> ABAP/4 Workbench -> Utilities -> Enhancements -> Project management.
- From the initial screen of transaction CMOD, choose the Text enhancements -> Field exits menu path.
- After choosing this menu path, you will be taken to the field exits screen. From here, you can create a field exit.
NOTE : Even though you use transaction CMOD to maintain field exits, you do not need to create a project to activate field exits.
Step 3: Create Field Exit
- From the field exit screen of transaction CMOD, choose the Field exit -> Create menu path.
- After choosing this menu path, a dialog box will prompt you for the appropriate data element .
- Enter the data element name and click the Continue pushbutton.
- Now, you will be able to create the function module associated to the data elements field exit.
Step 4: Create Function Module
- You will automatically be taken to the Function Library (SE37) after entering a data element name and clicking the Continue pushbutton.
- In the Function module field, a function module name will be defaulted by the system based on the data element specified. This name will have the following convention:
FIELD_EXIT_<data element>
- You can add an identifier (an underscore followed by a single character ).
- The first function module for a data elements field exit must be created without an identifier.
- To create the function module, click on the Create pushbutton, choose menu path Function module -> Create, or press F5.
- After choosing to create the function module, you will get the warning: "Function module name is reserved for SAP". This message is just a warning so a developer does not accidentally create a function module in the field exit name range. By pressing Enter, you will be able to go ahead and create the function module.
- Before coding the function module, you will have to specify the function modules attributes -- function group, application, and short text.
Step 5: Code Function Module
- From the function modules attributes screen, click on the Source code pushbutton or choose the Goto -> Function module menu path to the code of the function module.
- Here you will add your desired functionality for the field exit.
- Remember that field exits function module will have two parameters -- one importing parameter called "INPUT" and one exporting parameter called "OUTPUT". These parameters will be set up automatically by the system.
- You must remember to assign a value to the OUTPUT field. Even if the value does not change, it must be moved from the INPUT field to the OUTPUT field.
Step 6: Activate Function Module
- After coding the function module, you must remember to activate it.
- Use the Function module -> Activate menu path to activate the function module.
- At this point, you can return to the field exit transaction.
- You should be able to 'green arrow' back to this transaction.
- When you return to the field exit transaction, you will see an entry for the newly created field exit.
- At this point, the field exit is global. That is, it applies to all screens that use a particular data element. On any screen that uses the data element, the corresponding field exit function module will be triggered, once it is active.
- Also, the field exit will not be triggered yet because it is inactive.
Step 7: Assign Program/Screen
- This step is only needed if you want to make a field exit local.
- To make a field exit local, select the field exit and click on the Assign prog./screen pushbutton.
- In the dialog box , indicate the appropriate program name and screen number.
This information indicates that the field exit is local to the specified screen in the specified program.
- In the dialog box, you determine which function module gets executed for the field exit by specifying the identifier in the Fld. Exit field.
- If this field is left blank, the function module triggered will be 'FIELD_EXIT_<data element>'.
- If a single-character identifier is entered into the field, the function module triggered will be 'FIELD_EXIT_<data element>_<identifier>'.
Step 8: Activate Field Exit
- The field exit must be active for it to be triggered by the system.
- Activate the field exit by choosing the Field exit -> Activate menu path.
- After assigning the field exit to a change request, its status will change to Active and it will be triggered automatically on the appropriate screen(s).
NOTE : In order to activate the field exit the profile parameter abap/fieldexit = YES must be set on all application servers
Regards
Sreeni

Help needed for data updation in User Defined Tables

Hello Experts,
I am developing one add-on in SAP B1 8.8 to input data in a User Defined Table described as under
Table Name
DriverMst UDT Type is No Object
Description
Stores the Driver master data which are used to get reference in Sale Delivery Form and Driver data management activity
User defined fields
Data Name
Data source
Size
Pane Level
Description
Driver Code
Code
Alphanumeric
0
No object table fixed field
System Name
Name
Alphanumeric
30
0
No object table fixed field
Full Name
FullName
Text
50
0
Father Name
FatherName
Text
50
0
Birth Date
BirthDate
Date
0
Phone Number
PhoneNo
Alphanumeric
50
0
Mobile No
MobileNo
Alphanumeric
13
0
I have created one form using screen painter displaying text boxes and bind them to the table.
This form is working absolutely fine when there are some data in table (i.e. Browse using navigation)
My problem is, when I click add button from tool bar the "OK" button turn to "Add" that means the form is set to Add mode, but when I click "Add" button after entering some data nothing happens and input data is not stored in Table. The same "OK" Button turned to "Update" when I do changes in loaded data, but my changes are not reflected to table after I click "Update".

Thanks Nagarajan,
None.
There is no such query. The table fields is directly linked to Edit Box or Combo Box in form.
From the examples I learned that I have to do something like this to get my table updated
Dim oUsrTbl As SAPbobsCOM.UserTable
Dim Res As Integer
oUsrTbl = oCompany.UserTables.Item("DRIVERMST")
oUsrTbl.Code = oBPC.Value 'Item Specific of Driver Code Edit Box
oUsrTbl.Name = Left(oBPN.Value, 30) 'Item Specific of Name Edit Box
oUsrTbl.UserFields.Fields.Item("U_FullName").Value = oMFN.Value
oUsrTbl.UserFields.Fields.Item("U_FatherName").Value = oFTHN.Value
oUsrTbl.UserFields.Fields.Item("U_BirthDate").Value = oDOB.Value
oUsrTbl.UserFields.Fields.Item("U_PhoneNo").Value = oPHN.Value
(Similar For rest ofthe fields)
Res = oUsrTbl.Add()
Just let me know that is this necessary to do like above.. To be frank there are few more fields and matrices on the form which I didn't mentioned. I am just trying to get recovered from first step to proceed further.
Regards

User-Defined Message Search - PI 7.1 - EHP1 - SP06 - Not working

Hi Friends,
Recently, we have imported SP06 in our PI system (PI 7.1 EHP1). The SXMB_MONI has now new tab "User-Defined Selection Criteria".
To implement user-defined search, I have created filer, extractor, namespace prefix for one outbound interface through transaction SXMS_LMS_CONF. (As it is explained in SAP EHP1 features PDF and the link "http://help.sap.com/saphelp_nwpi711/helpdata/en/48/c85598f63335bfe10000000a42189d/frameset.htm".
Also we have created logical port through transaction SOAMANAGER. (followed the steps as mentioned in PDF)
After filters, extractor, namespace prefix created and activated, I have checked the extractor through Test Extractor, it is working fine. (All are green, given below is the output)
Type
Message text
Processing message 4DDFE95BAEC67152E10000009958A8AB
Analyzing payload of message version 000
No filter found
Analyzing payload of message version 004
Filter found for interface name PROACT.PROACT01
Name MATERIAL_ID value RPM312AZ/11522R1 extracted
Analyzing payload of message version 005
No filter found
Analyzing payload of message version 008
No filter found
Now, when I do search the same through SXMB_MONI, by giving inputs in the new tab "User-Defined Selection Criteria", Option button "Search for all" , selected the filter name "MATERIAL_ID" in the input field:Name and put material name in the in the input field:value. (same material I put), it shows the message "No message is available for selection".
Friends, could you kindly clarify why I am unable to search through SXMB_MONI? Am I missed any of the steps?
Kindly reply.
Kind regards,
Jegathees P.

Were you able to resolve the issue ?
If not, You need to execute program SXMS_EXTRACT_MESSAGES to build index for the user defined search from the old messages.
The job bulids index from the already processed messages.
Choose the relevant Method when creating the extractor
Method
You can choose between two methods:
Extract During Message Processing
Select this method if you want the attributes to be extracted from the selected messages while these messages are processed.
Extract with External Job
Select this method if you want to extract attributes from messages that were already processed, or if you want to change the extraction of attributes from messages, from which attributes were already extracted.
For this method you need to set up and use the job SXMS_EXTRACT_MESSAGES.
thanks
VJ

User Exit to add user-defined selection critieria onto VL10G

Does anyone know how to add user-defined selection criteria onto VL10G - Sales and purchase order display screen? OSS note 524424 states the userexit to transfer user-defined selection criteria from the selection screen to the report but no information on how to add the selection criteria on the screen. Is that something can be done through configuration or user-exit?
Any advice or sample is greatly appreciated.

I was in a hurry, I forgot to add, the user role specific selection screen assignment to VL10G is done at "delivery scenario" level
The delivery scenarios that are predefined in the system can be found under Logistics Execution -> Outbound Process -> Goods Issue for Outbound Delivery -> Outbound Delivery -> Create -> Collective Processing of Documents for Shipment.
You can make the following settings in a delivery scenario:
Selection screen
You can use the selection screen parameters to define the appearance of the selection screen used to select the delivery list.
There are three combinations of selection parameters available that each include a different number of tabs.
A long selection screen with no tabs
A selection screen with three tabs
A selection screen with six tabs
The selection criteria is the same on all three screens in the standard system, it is simply arranged differently.
This parameter also triggers scheduling of the report for processing the delivery list, with the same three available tab options.
Customer enhancements are also possible in the LV50R_PREFZ1 program, which should be triggered from a delivery scenario.
User role
In the standard system, a predefined user role is assigned to each delivery scenario. If necessary, you can copy these user roles into your own user roles, make changes as required, and then assign them to a delivery scenario of your choice.
If the user role assignment for a delivery scenario is changed in Customizing, the new settings are valid for all users that carry out this delivery scenario.

User defined selection screen

Hi, In my program i used a default seelction screen and 5 user defined selection screen. Based on the selections made in default selection screen, it should go to the corresponding user defined screen.
and the problem iam getting if i press enter jey insted of F8.
""Selection screen ZP2I_MASSCHANGE_TEMP1 1000 was
not called using CALL SELECTION-SCREEN"""
the code is as follows.
      A T   S E L E C T I O N-S C R E E N
*AT SELECTION-SCREEN.
AT SELECTION-SCREEN ON RADIOBUTTON GROUP rgp1.
CHECK SY-UCOMM EQ 'ONLI' OR SY-UCOMM EQ 'CRET' .
Download
IF r_dwnld = c_check.
Material Screen Call
    IF r_matplt = c_check.
      CLEAR p_werks7.
      sree = 'A'.
      CALL SELECTION-SCREEN 170.
      ENDIF.
Material Storage Screen Call
    IF r_matstr = c_check.
      CLEAR p_werks1.
      sree = 'B'.
      CALL SELECTION-SCREEN 110.
    ENDIF.
Material Handling Screen Call
    IF r_mathan = c_check.
      CLEAR p_werks2.
      sree = 'C'.
      CALL SELECTION-SCREEN 120.
    ENDIF.
Material Pick/Up Delivery Screen Call
    IF r_pcdt = c_check.
      CLEAR p_werks3.
      sree = 'D'.
      CALL SELECTION-SCREEN 130.
    ENDIF.
Material Inboundlogistics Screen Call
    IF r_inlogs = c_check.
      CLEAR p_werks4.
      sree = 'E'.
      CALL SELECTION-SCREEN 140.
    ENDIF.
Material Packaging Screen Call
    IF r_pkng = c_check.
      CLEAR p_werks5.
      sree = 'F'.
      CALL SELECTION-SCREEN 150.
    ENDIF.
ENDIF.
Upload Screen Call
IF r_upld = c_check.
    IF ( r_matplt = c_check OR
       r_matstr = c_check OR
       r_mathan = c_check OR
       r_pcdt   = c_check OR
       r_inlogs = c_check OR
       r_pkng   = c_check ).
      CLEAR p_uload.
      sree = 'G'.
      CALL SELECTION-SCREEN 160.
    ENDIF.
ENDIF.
     s T A R T - O F - S E L E C T I O N
START-OF-SELECTION.
DOWNLOAD
CASE sree.
    WHEN 'A'.
Select Material Details
      PERFORM get_material_data.
      IF NOT tbl_matplt[] IS INITIAL.
        IF p_dalv7 = c_check.
Display list in ALV
          PERFORM setup_alv_report.
        ELSE.
Download Storage data into local file
          PERFORM download_file USING p_matdet.
        ENDIF.
      ELSE.
        MESSAGE s020.
      ENDIF.
      CALL SELECTION-SCREEN 170.
Select Material storage data
    WHEN 'B'.
      PERFORM get_storage_data.
      IF NOT tbl_matstr[] IS INITIAL.
        IF p_dalv1 = c_check.
Display list in ALV
          PERFORM setup_alv_report.
        ELSE.
Download Storage data into local file
          PERFORM download_file USING p_matstr.
        ENDIF.
      ELSE.
        MESSAGE s020.
      ENDIF.
      CALL SELECTION-SCREEN 110.
Select Material Handling data
    WHEN 'C'.
      PERFORM get_materialhandling.
      IF NOT tbl_mathand[] IS INITIAL.
        IF p_dalv2 = c_check.
Display list in ALV
          PERFORM setup_alv_report.
        ELSE.
Download Material Handling data into local file
          PERFORM download_file USING p_mathan.
        ENDIF.
      ELSE.
        MESSAGE s020.
      ENDIF.
      CALL SELECTION-SCREEN 120.
Select Pick/Up DayTime data
    WHEN 'D'.
      PERFORM get_pickup_delivery.
      IF NOT tbl_pcdel[] IS INITIAL.
        IF p_dalv3 = c_check.
Display list in ALV
          PERFORM setup_alv_report.
        ELSE.
Download Pick/Up DayTime data into local file
          PERFORM download_file USING p_pcdt.
        ENDIF.
      ELSE.
        MESSAGE s020.
      ENDIF.
      CALL SELECTION-SCREEN 130.
Select Inbound Logistics data
    WHEN 'E'.
      PERFORM get_inboundlogistics.
      IF NOT tbl_inlog[] IS INITIAL.
        IF p_dalv4 = c_check.
Display list in ALV
          PERFORM setup_alv_report.
        ELSE.
Download Inbound Logistics data into local file
          PERFORM download_file USING p_inlogs.
        ENDIF.
      ELSE.
        MESSAGE s020.
      ENDIF.
      CALL SELECTION-SCREEN 140.
Select Packaging data
    WHEN 'F'.
      PERFORM get_packaging.
      IF NOT tbl_pkng[] IS INITIAL.
        IF p_dalv5 = c_check.
Display list in ALV
          PERFORM setup_alv_report.
        ELSE.
Download Packaging data into local file
          PERFORM download_file USING p_pkng.
        ENDIF.
      ELSE.
        MESSAGE s020.
      ENDIF.
      CALL SELECTION-SCREEN 150.
    WHEN 'G'.
Material Details data upload
      IF r_matplt = c_check.
Free memory IDs corresponding to upload tables
        PERFORM free_memory.
Upload Material details from local file
        PERFORM load_file USING p_uload.
Prepare data
        PERFORM prepare_mat_data.
Get actual Material Details from ZP2_MATPLT
        PERFORM get_old_material_data.
Validate new data against database entries
        PERFORM validate_material_data.
Check Plant authorization
Move plants to itab.
        REFRESH tbl_plts.
        LOOP AT tbl_matplt.
          tbl_plts-werks = tbl_matplt-werks.
          APPEND tbl_plts.
          CLEAR tbl_plts.
        ENDLOOP.
        DELETE ADJACENT DUPLICATES FROM tbl_plts
        COMPARING werks.
Check authoriztions
        PERFORM check_plant_authorization1 TABLES tbl_plts.
        REFRESH tbl_plts.
        IF p_trun IS INITIAL.
Modify material data
          PERFORM modify_zp2_matplt.
        ENDIF.
Material Storage data upload
        IF r_matstr = c_check.
Free memory IDs corresponding to upload tables
          PERFORM free_memory.
Upload material storage data from local file
   PERFORM load_matstr_data USING p_uload.
          PERFORM load_file USING p_uload.
Get the material storage data from database
          PERFORM get_old_storage_data.
Get material plant data for the corresponding
Storage data.
          PERFORM get_matplt_data_storage.
Get data from table fields
          PERFORM get_tblfld_values.
Validate data against database entries
          PERFORM validate_storage_data.
Check Plant authorization
Move plants to itab.
          REFRESH tbl_plts.
          LOOP AT tbl_matstr.
            tbl_plts-werks = tbl_matstr-werks.
            APPEND tbl_plts.
            CLEAR tbl_plts.
          ENDLOOP.
          DELETE ADJACENT DUPLICATES FROM tbl_plts
          COMPARING werks.
Check authoriztions
          PERFORM check_plant_authorization1 TABLES tbl_plts.
          REFRESH tbl_plts.
          IF p_trun IS INITIAL.
Modify material storage data
            PERFORM modify_zp2matstr_table.
          ENDIF.
        ENDIF.
Material Handling data upload
        IF r_mathan = c_check.
Free memory IDs corresponding to upload tables
          PERFORM free_memory.
Upload material Handling data from local file
          PERFORM load_file USING p_uload.
Get the material Handling data from database
          PERFORM get_old_materialhandling.
Get material plant data for the corresponding
handling data.
          PERFORM get_matplt_data_handling.
Validate data against database entries
          PERFORM validate_handling_data.
Check Plant authorization
Move plants to itab.
          REFRESH tbl_plts.
          LOOP AT tbl_mathand.
            tbl_plts-werks = tbl_mathand-werks.
            APPEND tbl_plts.
            CLEAR tbl_plts.
          ENDLOOP.
          DELETE ADJACENT DUPLICATES FROM tbl_plts
          COMPARING werks.
Check authoriztions
          PERFORM check_plant_authorization1 TABLES tbl_plts.
          REFRESH tbl_plts.
          IF p_trun IS INITIAL.
Modify material handling data
            PERFORM modify_zp2mathand_table.
          ENDIF.
   ELSEIF sy-ucomm = c_s.
     LEAVE SCREEN.
        ENDIF.
Material Pick/Up DayTime data upload
        IF r_pcdt = c_check.
Free memory IDs corresponding to upload tables
          PERFORM free_memory.
Upload Pick/Up DayTime file data from local file
          PERFORM load_file USING p_uload.
Get the Pick/Up DayTime data from database
          PERFORM get_old_pickup_delivery.
Get Inbound logistics data corresponding to handling
          PERFORM get_inlogs_pcdel.
Validate data against database entries
          PERFORM validate_pcdel_data.
Check Plant authorization
Move plants to itab.
          REFRESH tbl_plts.
          LOOP AT tbl_pcdel.
            tbl_plts-werks = tbl_pcdel-werks.
            APPEND tbl_plts.
            CLEAR tbl_plts.
          ENDLOOP.
          DELETE ADJACENT DUPLICATES FROM tbl_plts
          COMPARING werks.
Check authoriztions
          PERFORM check_plant_authorization1 TABLES tbl_plts.
          REFRESH tbl_plts.
          IF p_trun IS INITIAL.
Modify Pick/Up DayTime table
            PERFORM modify_zp2pcdt_table.
          ENDIF.
   ELSEIF sy-ucomm = c_s.
     LEAVE SCREEN.
        ENDIF.
Material Inbound Logistics data upload
        IF r_inlogs = c_check.
Free memory IDs corresponding to upload tables
          PERFORM free_memory.
Upload Inbound Logistics file data from local file
          PERFORM load_file USING p_uload.
Get the Inbound Logistics data from database
          PERFORM get_old_inboundlogistics.
Get data from table fields
          PERFORM get_tblfld_values.
Get Vendor data
          PERFORM get_vendor_inlog.
Get material plant data for the corresponding
Inboundlogistics data.
          PERFORM get_matplt_data_inlog.
Validate data against database entries
          PERFORM validate_inlog_data.
Check Plant authorization
Move plants to itab.
          REFRESH tbl_plts.
          LOOP AT tbl_inlog.
            tbl_plts-werks = tbl_inlog-werks.
            APPEND tbl_plts.
            CLEAR tbl_plts.
          ENDLOOP.
          DELETE ADJACENT DUPLICATES FROM tbl_plts
          COMPARING werks.
Check authoriztions
          PERFORM check_plant_authorization1 TABLES tbl_plts.
          REFRESH tbl_plts.
          IF p_trun IS INITIAL.
Modify Inbound Logistics table
            PERFORM modify_zp2inlog_table.
          ENDIF.
        ENDIF.
Packaging data upload
        IF r_pkng = c_check.
Free memory IDs corresponding to upload tables
          PERFORM free_memory.
Upload Packaging file data from local file
          PERFORM load_file USING p_uload.
Get the Packaging data from database
          PERFORM get_old_packaging.
Get material plant data for the corresponding
Packaging data.
          PERFORM get_matplt_data_pkng.
Get Vendor data
          PERFORM get_vendor_pkng.
Get data from table fields
          PERFORM get_tblfld_values.
Load Primary container reference data
          PERFORM primary_container_data.
Validate data against database entries
          PERFORM validate_packaging_data.
Check Plant authorization
Move plants to itab.
          REFRESH tbl_plts.
          LOOP AT tbl_pkng.
            tbl_plts-werks = tbl_pkng-werks.
            APPEND tbl_plts.
            CLEAR tbl_plts.
          ENDLOOP.
          DELETE ADJACENT DUPLICATES FROM tbl_plts
          COMPARING werks.
Check authoriztions
          PERFORM check_plant_authorization1 TABLES tbl_plts.
          REFRESH tbl_plts.
          IF p_trun IS INITIAL.
Modify Packaging data
            PERFORM modify_zp2pckg_table.
          ENDIF.
        ENDIF.
      ENDIF.
   IF p_trun = c_check.
Display the Error list
    PERFORM display_result.
      CALL SELECTION-SCREEN 160.
ENDIF.
ENDCASE.
Another problem is If i press BACK on the report output, it is coming to the default selection screen. and my requirement is, it should come to the corressponding user defined selection screen and not the default selection screen.
PLz help me in this regard.. Iam breaking my heading, but could not able to solve it.
Thanks in advance
sree

Hello,
You must have defined user command for the radio button. This is not required. Just try putting it in at selection screen. AT SELECTION-SCREEN ON RADIOBUTTON GROUP rgp1.
the moment the user clicks the radio button it will go to this event and call the screen. Just use AT SELECTION-SCREEN.
Regards,
Shekhar Kulkarni

USER DEFINED FIELD ERROR

Hi,
The following is the setup.
1. I defined a DBAT - ORACLE CONNECTOR and was able to provision users to it.
2. Then I defined an user defined field in OIM i.e.
2.1 added in the User defined field list in Users form - branch
2.2 Added the entry with proper tags in formmetadata.xml
2.3 And also updated it in the xlWebAdmin_en_US.properties file
3. Restarted the server.
4. And in the DBAT provisioning process added a new task, attached a process task adapter in integration.
4.1 in Adapter variable mapping
Adapter return value
Map to - Process Data
Qualifier - DEFAULT_BRANCH ( I think target attribute name)
4.2 input value
Map to - user definition
qualifier - branch
5. Added the USR_UDF_BRANCH CODE , Update DEFAULT_BRANCH to the the lookup usr process triggers.
When an end user modifies from the account profile, it only reflects in the process form and not in the target table
It gives the following error and also an error for email notification which i have not configured. it is using OOTB user profile edit process.
ition xml of the connector 'DBPCAT'
16:10:23,609 ERROR [REQUESTS] Class/Method: tcEmailNotificationUtil/sendEmail encounter some problems: {1}
java.lang.NullPointerException
at java.util.Hashtable.put(Hashtable.java:394)
at com.thortech.xl.dataobj.util.tcEmailNotificationUtil.sendEmail(Unknown Source)
at com.thortech.xl.dataobj.util.tcEmailNotificationUtil.sendEmailNotification(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcRequestOperationsBean.createProfileModifyRequest(Unknown Source)
at com.thortech.xl.ejb.beans.tcRequestOperationsSession.createProfileModifyRequest(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionContainer.java:237)
at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstanceInterceptor.java:169)
at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
at org.jboss.ejb.Container.invoke(Container.java:960)
at sun.reflect.GeneratedMethodAccessor127.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:86)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659)
at org.jboss.invocation.local.LocalInvoker$MBeanServerAction.invoke(LocalInvoker.java:169)
at org.jboss.invocation.local.LocalInvoker.invoke(LocalInvoker.java:118)
at org.jboss.invocation.InvokerInterceptor.invokeLocal(InvokerInterceptor.java:209)
at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:195)
at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:61)
at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:70)
at org.jboss.proxy.ejb.StatelessSessionInterceptor.invoke(StatelessSessionInterceptor.java:112)
at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:100)
at $Proxy778.createProfileModifyRequest(Unknown Source)
at Thor.API.Operations.tcRequestOperationsClient.createProfileModifyRequest(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
at $Proxy806.createProfileModifyRequest(Unknown Source)
at com.thortech.xl.webclient.actions.tcModifyProfileAction.modifyUser(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:182)
at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:157)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:262)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:446)
at java.lang.Thread.run(Thread.java:619)
16:10:32,078 INFO [STDOUT] Running GENERICADAPTER
16:10:32,078 INFO [STDOUT] Target Class = com.thortech.xl.gc.runtime.GCAdapterLibrary
16:10:33,250 ERROR [APIS]
java.lang.NullPointerException
at com.thortech.xl.ejb.beansimpl.GCOperationsBean.getModelFromConnectorDefinition(Unknown Source)
at com.thortech.xl.ejb.beansimpl.GCOperationsBean.lookup(Unknown Source)
at com.thortech.xl.ejb.beans.GCOperationsSession.lookup(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionContainer.java:237)
at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstanceInterceptor.java:169)
at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
at org.jboss.ejb.Container.invoke(Container.java:960)
at sun.reflect.GeneratedMethodAccessor127.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:86)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659)
at org.jboss.invocation.local.LocalInvoker$MBeanServerAction.invoke(LocalInvoker.java:169)
at org.jboss.invocation.local.LocalInvoker.invoke(LocalInvoker.java:118)
at org.jboss.invocation.InvokerInterceptor.invokeLocal(InvokerInterceptor.java:209)
at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:195)
at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:61)
at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:70)
at org.jboss.proxy.ejb.StatelessSessionInterceptor.invoke(StatelessSessionInterceptor.java:112)
at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:100)
at $Proxy373.lookup(Unknown Source)
at Thor.API.Operations.GCOperationsClient.lookup(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
at $Proxy814.lookup(Unknown Source)
at com.thortech.xl.gc.runtime.GCAdapterLibrary.executeFunctionality(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpDBPCAT_GTC.GENERICADAPTER(adpDBPCAT_GTC.java:125)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpDBPCAT_GTC.implementation(adpDBPCAT_GTC.java:70)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.eventPostUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.checkChildrenIfCompleted(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.checkChildren(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.eventPostUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.adapterfactory.events.tcAdpEvent.updateSchItem(Unknown Source)
at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeProcessAdapter(Unknown Source)
at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeAdapter(Unknown Source)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpDBPCATPREPOPULATEADAPTER.implementation(adpDBPCATPREPOPULATEADAPTER.j
ava:52)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.client.events.tcTriggerUserProcesses.insertMileStones(Unknown Source)
at com.thortech.xl.client.events.tcTriggerUserProcesses.trigger(Unknown Source)
at com.thortech.xl.client.events.tcUSRTriggerUserProcesses.implementation(Unknown Source)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.eventPostUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcUSR.eventPostUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcUSR.updateProfile(Unknown Source)
at com.thortech.xl.dataobj.tcREQ.selfProfileEditUser(Unknown Source)
at com.thortech.xl.dataobj.tcREQ.launchEntityDERActions(Unknown Source)
at com.thortech.xl.dataobj.tcREQ.eventPostUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcREQ.checkRequestReceived(Unknown Source)
at com.thortech.xl.dataobj.tcREQ.eventPostUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.schedule.jms.requestapproval.InitRequestApproval.execute(Unknown Source)
at com.thortech.xl.schedule.jms.requestapproval.InitRequestApproval.execute(Unknown Source)
at com.thortech.xl.schedule.jms.messagehandler.MessageProcessUtil.processMessage(Unknown Source)
at com.thortech.xl.schedule.jms.messagehandler.MessageHandlerMDB.onMessage(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
at org.jboss.ejb.MessageDrivenContainer$ContainerInterceptor.invoke(MessageDrivenContainer.java:495)
at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
at org.jboss.ejb.plugins.MessageDrivenInstanceInterceptor.invoke(MessageDrivenInstanceInterceptor.java:116)
at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
at org.jboss.ejb.plugins.RunAsSecurityInterceptor.invoke(RunAsSecurityInterceptor.java:109)
at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
at org.jboss.ejb.MessageDrivenContainer.internalInvoke(MessageDrivenContainer.java:402)
at org.jboss.ejb.Container.invoke(Container.java:960)
at org.jboss.ejb.plugins.jms.JMSContainerInvoker.invoke(JMSContainerInvoker.java:1092)
at org.jboss.ejb.plugins.jms.JMSContainerInvoker$MessageListenerImpl.onMessage(JMSContainerInvoker.java:1392)
at org.jboss.jms.asf.StdServerSession.onMessage(StdServerSession.java:266)
at org.jboss.mq.SpyMessageConsumer.sessionConsumerProcessMessage(SpyMessageConsumer.java:906)
at org.jboss.mq.SpyMessageConsumer.addMessage(SpyMessageConsumer.java:170)
at org.jboss.mq.SpySession.run(SpySession.java:323)
at org.jboss.jms.asf.StdServerSession.run(StdServerSession.java:194)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:761)
at java.lang.Thread.run(Thread.java:619)
16:10:35,203 ERROR [APIS] An exception occurred while creating the GenericConenctor Model from the Connector Definition file
... 126 more
16:11:17,421 ERROR [FRAMEWORKPROVISIONING] An exception occurred while generating Generic Connector model from the connector defin
ition xml of the connector 'DBPCAT'
The other usecase is - when xelsysadm logs into idm console and updates the attribute on the user form, it updates the process form and the target table column also.
Please help me...
Thanks & Regards
Kunal Jain

You need to give permission to update the process form to any users who would be the source of the change. So if joe schmoe is updating the user, they need permission to update the process form for any user they update.
-Kevin

Performance restrictions using User-Defined Message Search in PI 7.1 EhP1

Hi Gurus,
We want to apply the User-Defined Message Search in our productive system.
We also want to set the extractors to run during Message Processing .
Do you have any inputs on how this might affect the system performance?
Any best practices, previous experiences or thoughts on that?
Some of my questions:
How many Filters/Extractors would be a limit to not affect too much the messaging processing performance?
Running the extractors during message processing would greatly affect the performance? When to run the extractors in a batch job instead of runtime?
Any input is greatly appreciated.
Regards,
José Omar

Hi José ,
We are also planning to use User-Defined Search feature in our PI system. Could you please let me know whether or not were you able to use this in your PI productive environment?
Additionally , if you were able to use it can you please let me know the performance?
Thanks in advance
Edited by: Ravindra Hegde on Jun 3, 2011 11:26 AM

Not getting alerts even after applied the monitoring policy on user defined group.

Hi,
recently we have installed OEM Ops center 12c for monitoring our oracle servers. I have created a user defined group and applied a userdefined monitoring policy on that group. I have threshold 70% as crtical and 50 % as warning in my monitoring policy.
Some of my servers are having 77% disk utlization and im not getting any alerts for that.
What will be the problem?
When i see the membership of particular group (group -> membership in center pane), im not able to see the monitoring policy name on the monitoring policy column but i have applied policy on that group.
Please help me to resolve the issue.
Thanks,
Veijar

Hi Stijn,
Thanks for the response.
You are right. I was sending personalized iBot to group 'Financial Analyst'. A non-OBI user(Reshmi) belongs to this group.
But still problem has not been completely resolved.Still users in group either Administrator/Financial Analyst not getting alert via mail.
Atleast the users in Administrator group should get alert via mail, since both are defined in rpd.
Now when i send non-personalized ibot to group 'Financial Analyst', All the users other than Reshmi get alert on their dashboard but they don't get alert
via mail.Also Reshmi does not get alert via mail and error file shows error like -
No devices for user: Reshmi.
Now i am not getting the error nQSError: 43001 Authentication failed for Reshmil in repository Star: invalid user/password. (08004)
which i was getting earlier while sending personalized ibot.
I have already defined the Mail tab contents using Job Manager. Also i have selected User Destinations both Interactive Dashboard and Active Delivery
Profile.
Why the users don't get alert via mail? What could be the problem?

Indexing Failed - User-Defined message search

Hi
I am trying to set-up a user-defined message search in our PI 7.3 system. After having created a filter and defined a search criteria, SAP says to "create an index of the messages that match the active filters and search criteria" [Link|http://help.sap.com/saphelp_nw73/helpdata/en/48/b2e0186b156ff4e10000000a42189b/content.htm]
Every time I try to run indexing it fails. I don't know why as there is no help-button available and I haven't found anyone experiencing the same issue. Anyone else experienced the same issue?
Also - using XPath - do I have to consider any particular namespace prefix etc for PI messsages? I have tested my XPath on payload XML in XMLSpy, but the search functionality seem to expect a different format on the XPath syntax...
Thank you!
regards Ole

Hello,
I have set this up for an interface now. I am not sure how important the index job is because
the indexing job worked in the dev system, never stopped in QA and failed in prod. Anyway the message search works in all three systems.
The following blog made me understand the namespace prefix:
http://scn.sap.com/people/abinash.nanda/blog/2011/08/17/pi-73--adapter-user-defined-message-search
Regards,
Per Rune

User defined message search criteria on ECC

Hi Experts,
I have configured UDMS-user defined message search under ECC (for message search in MONI) using T-code: SXMS_LMS_CONF and while defining extractors, I have selected both check boxes.
1. Extract during message processing
2. Extract with external Job
As per my knowledge, 1st option indexes all messages which are processed after we activate filters.
2nd option is used to index previous messages which are processed before defining filter.
For me 2nd option is working fine (I can search old messages which are indexed using a program: SXMS_EXTRACT_MESSAGES).
But 1st option is not working. I have created filters yesterday and activated also, but couldn't able to trace today messages using user defined search.
Please help in this regard.
SP.

Hi.
From SAP Note. 1600078
Solution
Most problems occur because you use the communication components or partners as the filter criteria in the filter even though you want the system to index only certain interfaces. In this situation, you must always set the components or partners to "*".
If you specify components or partners, you must consider how indexing of messages runs technically. If indexing is called at runtime, the system executes it at the start of the Integration Engine and at the end of the Integration Engine; this means that the value that the components or partners have at this point is definitive. For example, if you have defined a receiving component, this is not set at the start of the Integration Engine (except in special cases) and this is why the filter does not select the message. It also has no effect at the end because the message contains the receiving interface after the mapping. If you call the test function of transaction SXMS_LMS_CONF, the filter is used on each individual persistent version of the message (the same process as when indexing via a job). If the message is made persistent directly before the mapping, the sender interface exists there and the receiving component or partner is set. Therefore, the filter described above would be active here. As a result, this function is better defined to check the XPath than the filter criteria.
Check if you put * in the receiver component.
Regards
Lucho.

User defined fields reference in Matrix VB6

I have a couple of user defined fields on the Delivery Details Matrix that I need to update. I know that I need to reference them by index as follows:
Set oEditText = oDelDetMatrix.Columns("Index").Cells.Item(ivlRowCounter).Specific
oEditText.Value = CCur(dvlSomePrice)
The problem is even if I check Watch window for the indexes I can not be certain what indexes to use for these columns. Is there a way to get exact index number?
Is there a way to reference matrix columns by by field names?

Spoke too soon.....I just solved it ->
Set oEditText = oDelDetMatrix.Columns("U_DolPerOz").Cells.Item(ivlRowCounter).Specific
oEditText.Value = dvlSomePrice

LDAP search cannot find entry by user "defined attribute" or "sounds like

Hi, I have an JSP program that searches an LDAP Sun One Directory Server.
All of my search filters ( by givenname,sn,mail and phone #) work fine with the search base set at the very top (root ) of my DIT tree.
However with the same search base, searching by an "User Defined Attribute" fails to return anything (and note that my search filter includes the objectclass that goes with this user defined attribute)?
Yet, if I change the search base so it points all the way down the DIT tree (maybe near RDN?), the "User Defined Attribute" search works fine ?
Additionally, "sounds like" search filter (givenname~=) fails to find anything at
the upper root search base of DIT. If I change the search base to point down in the DIT tree as I did above, the "sounds like" filter will work?
I've tried everything I know?

Hi Dora9,
Thanks for your reply.
I am glad that you have solved the problem and thanks for your share us the solution
here, so it would be helpful for other members who get the same issue
and we will close this case.
In addition, I suggest you could try to get
the issue confirmed and diagnose by product team. Would you please create connect report for it? You will get email notification for update from the product team experts:
http://connect.microsoft.com/VisualStudio/feedback/CreateFeedback.aspx,
if you submit it, you could share us the link here, so we could know the latest information from the Product team expert. And I will help you to vote it.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

User Defined Stock Removal Strategy

Hi,
We want to define a user defined stock removal strategy while creating TO for delivery using transaction LT03. This can be done in user exit MWMTO004. Although we modify the output table T_QMAT in this exit as per requirement , the TO is not split as per the table.
SAP proposes all the batch bins in table T_QMAT , but if all the delivery quantity is found in first bin itself , the TO is created with that bin only , no Split. We wish to split the TO as per table T_QMAT.
How to split the TO as per proposal from the exit ?
Please provide some ideas.
Regards,
Tushar

Hello,
You can change the Storage unit type in this exit EXIT_SAPLL03A_005 of TO creation transaction.
I am not sure, If this helps you.
Thanks and Regards
Reddy

User defined delivery filters?

Similar Messages

Maybe you are looking for