User.dir variable

My applet have to read and write some files. JVM always read and
write those files to path pointed by user.dir variable. The picture is
that IE and Netscape has different values to this variable, and I want to know how to set it to a unique value.
Regards
Rafael - [email protected]

You can't set that variable. However you don't need to anyway, because the statement you made
"JVM always read and write those files to path pointed by user.dir variable."
is not true. You can specify any directory at all to read from and write to.

Similar Messages

Ide.user.dir in Jdeveloper 12c

Hi Gurus,
I am just installing Jdeveloper 12c 64 bit for windows. There is another Jdeveloper 10.1.3.3.0 already in placed which i want to keep for EBS R12 OAF extendsion development.
Jdeveloper 10.1.3.3.0 was installed in D:\JDEV\1213\jdevhome\jdev and environment variable JDEV_USER_HOME is set to D:\JDEV\1213\jdevhome\jdev
Jdeveloper 12c was installed in D:\oracle\Middleware\Oracle_Home\jdeveloper
I created new environment variable JDEV_USER_DIR and set it to D:\JDEV_121200_win64\jdevhome\jdev, but notice some different behavior for ide.user.dir entry after Jdeveloper launched.
Scenario 1: Launch Jdeveloper 12c with command : jdev.exe -J-Dide.user.dir=D:\JDEV_121200_win64\jdevhome\jdev
                   In Help->About->Properties, value of :
                   ide.user.dir = D:\JDEV_121200_win64\jdevhome\jdev
                   ide.pref.dir = D:\JDEV_121200_win64\jdevhome\jdev
                   Systemxxx folder created in D:\JDEV_121200_win64\jdevhome\jdev\system12.1.2.0.40.66.68
Scenario 2: Add ide.user.dir entry = D:\JDEV_121200_win64\jdevhome\jdev in jdev.boot
                   Launch Jdeveloper 12c
                   In Help->About->Properties, value of :
                   ide.user.dir = D:JDEV_121200_win64jdevhomejdev
                   ide.pref.dir = D:JDEV_121200_win64jdevhomejdev
                   JDEV_121200_win64jdevhomejdev folder created in D:\oracle\Middleware\Oracle_Home\jdeveloper\jdev\bin
Question : Why ide.user.dir and ide.pref.dir entry are not created with "\" ? Why JDEV_121200_win64jdevhomejdev folder is created whereby i wanted to be in
                  D:\JDEV_121200_win64\jdevhome\jdev?
Scenario 3: Launch Jdeveloper 10.1.3.3.0
                   In Help->About->Properties, value of :
                   ide.user.dir = D:JDEV_121200_win64\jdevhome\jdev
Question: How to keep the ide.user.dir for this version remain to point to D:\JDEV\1213\jdevbin instead of D:JDEV_121200_win64\jdevhome\jdev?
                 Is there any impact when i leave it to point to D:JDEV_121200_win64\jdevhome\jdev?
Regards,
Fendy

I change ide.user.dir in both files and it works.

User.dir Web Logic Server

Can I set an environmental variable like user.dir in the Web Logic Server ?
Thanks in advance
Edited by: Xavi on Apr 30, 2010 3:48 AM

Yes ...It is possible.
Just open the Server start Script (<DOMAIN_HOME>\bin\startWebLogic.cmd) and then set the following JAVA_OPTION There like :
 In WINDOWS based OS (startWebLogic.cmd) Code Snippet 
set DOMAIN_HOME=C:\bea103\user_projects\domains\base_domain
for %%i in ("%DOMAIN_HOME%") do set DOMAIN_HOME=%%~fsi
call "%DOMAIN_HOME%\bin\setDomainEnv.cmd" %*
set SAVE_JAVA_OPTIONS=%JAVA_OPTIONS% -Duser.dir=E:/MyDirectory 
 In UNIX based OS (startWebLogic.sh) Code Snippet 
DOMAIN_HOME="/opt/app/bea103/user_projects/domains/base_domain"
. ${DOMAIN_HOME}/bin/setDomainEnv.sh $*
SAVE_JAVA_OPTIONS="${JAVA_OPTIONS}" -Duser.dir=/opt/app/MyDirectory 
If you are starting your Servers from AdminConsole with the Help of NodeManagers then you can set the JAVA_OPTIONS like mentioned in the below Link:
http://jaysensharma.wordpress.com/2010/03/26/nodemanager-based-managedservers-setting-mem_args/

Need help in creating a user exit variable

Hi all,
I have created a query in which a key figure needs to be automated with an user exit variable.I want to derive the value of this key figure 'x' based on calender month.
This key figure should get the cumulative value from the first month of the fiscal year till the calender year month entered while executing the query.
I got a basic understanding on the User exits from SDN. But Im not sure how to implement this logic.
I would really appreciate if you could provide me a detailed explanation of how to do this.
Thanks in advance,
Vinoth

Hi
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/208811b0-00b2-2910-c5ac-dd2c7c50c8e8
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6378ef94-0501-0010-19a5-972687ddc9ef
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2d99121a-0e01-0010-e78c-b1ae566a2413
http://sap.ittoolbox.com/groups/technical-functional/sap-bw/how-can-i-set-bex-variables-in-i_step3-exit_saplrrs0_001-335232

How to select several values from a user exit variable in a planning folder

Hello,
I have created a user exit variable for limiting the values only to which the user need to access.
For a simulation part, it is then necessary for him to select several values from these values (not only one, and not all)
But It seems in this case the user has only two possibilities :
- keep all the values without any restriction
- restrain the selection to only one value.
It seems possible for the user to access to a multiple choice window, but this possibility doesn't seems to work : in all tests we did, only the first value was taken into account by BPS.
If this method is not good do you know an other manner to permit the user to choice several values amongst a set of pre-selected (because the original set is too important) values ?
Thanks for your help.

Hi Mayank,
Thanks for your response, but I don't think it corresponds to my problem.
I my case, I use a user exit variable to filter some data. It seems BPS offers the possibility to the user to select several values amongts the pre-selected values presented by the user exit variable, but it doesn't work. We can use a popup in which we enters the required values, but in final, only the first value is taken into account.
I don't know if it is due to a BPS bug or if it is not a good solution in regard to BPS philosophy. In this case, the concerned caracteristic isn't in the header but in lead columns.
I must present a solution to my client next monday, so I have not enough time to open an OSS message.
An alternate solution should be interesting too.
My need is to present to a user a selection of values amongst all values from an infoobject (the user exit variable seemed to be a good solution) and the user must have the possibility to select some values amongst these as filter.
Regards

Pass user selected variable to Entity implementation class

Guys,
I need to pass the user selected variable to Entity class. and looking for the best way to do this ......
If user selected process1 or process2 then I need to call stored procedure right before the commit. So i need to pass the user selected process to entity class file.
I am thinking about having a transient attribute on entity and set the value on front end..... so that value will be pass to the entity class file and in beforeCommit method i can check the value of transient variable and then call stored procedure
is this a good approach or any other suggestions are greatly appreciated....
thank you
-Raj

Thank you Timo and Jobinesh....
Good suggestion Jobinesh... will start the implementation
Thank you
-Raj

User-Exit Variable

Hi, I created a simple user-exit variable and for some reason the variable seems to get executed around 16 times and then the query gives me the below error messages.   Any ideas why my variable would have I_STEP = 2 many times before it bombs out?
Note: This variable is based on a Virtual Characteristic I just implemented and is probably related. The query did not fail before trying to implement this user exit based on the Virtual Characteristic.
Error for variable in customer enhancement ZVRSR_001
Incorrect call of OLAP layer CL_RSR_OLAP; error in BW-BEX-ET
*~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-
* Load Variable with NCI Authorized Sales Rep (Sales Group)
*~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-
WHEN 'ZVRSR_001'.
    IF I_STEP = 2.                         "after the popup
      DATA: LT_REP    TYPE /BIC/AZ_P_O04300.
      DATA: LV_REP    TYPE /BI0/OISALES_GRP.
      SELECT SINGLE * FROM /BIC/AZ_P_O04300 INTO LT_REP
           WHERE USERNAME = SY-UNAME.
      IF SY-SUBRC = 0.
        W_L_S_RANGE-LOW = LT_REP-/BIC/ZSHTO_GRP.
      ELSE.
        W_L_S_RANGE-LOW = '???'.
      ENDIF.
      W_L_S_RANGE-SIGN = 'I'.
      W_L_S_RANGE-OPT = 'BT'.
      APPEND W_L_S_RANGE TO E_T_RANGE.
    ENDIF.
ENDCASE.

OK, It looks like because it is a Virtual Characteristic that the User Exit Variable Code will be called every time the "Virtual Characteristic" code is executed as well. The real problem seemed to be that I had used a BT in the Variable User Exit Range. Once I changed that to "EQ' it works fine now. Thanks

Using user defined variables in SAP BPC 7.0 NW

Hi,
I am using BPC 7.0 SP2 NW version. I want to do some calculatioins and/or comparision in the script logic by using user defined variables.
For Ex: I want to assign the property TIMEID of TIME dimension to a variable and then use this variable in my IIF statement.
I have tried a lot but not getting any solution.
Can anyone guide me in how to use user defined variables in Script Logic.
Your valuable reply is appreciated.
Thanks & Regards
Manoj Damle

Hi,
Thanks for the valuable reply.
But i want to define variables in the Script Logic and not in the Data Manager.
The scenario is like this:
I want to check the value of the DUMMYACC1 member of GL_ACCOUNT dimension with a constant and depending on the condition i want to update a user defined variable. This variable will further be used in the *SELECTCASE statement for decision making.
The Code is as follows:
*XDIM_MEMBERSET COMP_CODE = COMP_CODE_1
*XDIM_MEMBERSET BUS_AREA = BUS_AREA_1
*XDIM_MEMBERSET VERSION = VERSION_1
*XDIM_MEMBERSET CURRENCY = AUD
*XDIM_MEMBERSET DATASRC = DATASOURCE_1
*XDIM_MEMBERSET GL_ACCOUNT = SALESREVENUE,PRICE,QUANTITY,DUMMYACC1
*XDIM_MEMBERSET TIME=2009.MAY,2009.JUN
*XDIM_MEMBERSET CUSTOMERCATEGORY = CUSTOMER_CAT_1
*XDIM_MEMBERSET PROFIT_CTR = PROFIT_CTR_1
*XDIM_MEMBERSET SEGMENT = SEGMENT1
*XDIM_MEMBERSET MEASURES = PERIODIC
*FUNCTION PRO(%VAR1%,%VAR2%)
    [%VAR1%].CURRENTMEMBER.PROPERTIES("%VAR2%")
*ENDFUNCTION
*FOR %GL_ACC% = DUMMYACC1
    *FOR %CV_TIM% = 2009.MAY,2009.JUN
        #CUR_MTH = IIF(([GL_ACCOUNT].[%GL_ACC%],[TIME][%CV_TIM%]) = 1.,1,NULL)
    *NEXT
*NEXT
*SELECTCASE #CUR_MTH
*CASE 1
    #CURRENTMTH = PRO(TIME,TIMEID)
*ENDSELECT
The errors which system gives is:
1. Duplicate formula found
2. Invalid MDX statement
3. #CUR_MTH & #CURRENTMTH is not a valid member
Please give your valuable suggestion.
Thanks and Regards
Manoj Damle

Value for user-exit variable is invalid

Hi Gurus,
My Value for a Fiscal Year Prd returns a invalid value for the 12th month of each year( for Example 12/2004, returns the error "Value 200313 for User-exit variable is invalid.
This is the code that is being used.
*Rolling 12 months for entered month
when 'ZCALM12'.
 clear: v_mth, v_yr.
 REFRESH E_T_RANGE.
 CLEAR L_S_RANGE.
 LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
 WHERE VNAM = 'ZCALMON'.
 exit.
 endloop.
 v_yr = LOC_VAR_RANGE-LOW+0(4) - 1.
 v_mth = LOC_VAR_RANGE-LOW+4(2) + 1.
 L_S_RANGE-SIGN = 'I'.
 L_S_RANGE-OPT = 'BT'.
 concatenate v_yr v_mth into L_S_RANGE-LOW.
 L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW.
 APPEND L_S_RANGE TO E_T_RANGE.
Thanks in Advance.

Hi Ravi,
when 'ZCALM12'.
clear: v_mth, v_yr.
REFRESH E_T_RANGE.
CLEAR L_S_RANGE.
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'ZCALMON'.
exit.
endloop.
-->> Here, you are not checking any thing. On which logic you are reducing year by one and increasing month by 1..?
v_yr = LOC_VAR_RANGE-LOW+0(4) - 1.
v_mth = LOC_VAR_RANGE-LOW+4(2) + 1.
-->>IF month is 200512 you will get output from above code is : please check.
v_yr = 2005 - 1 = 2004
v_mth = 12 +1 = 13.
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'BT'.
concatenate v_yr v_mth into L_S_RANGE-LOW.
L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW.
APPEND L_S_RANGE TO E_T_RANGE.
Try to debug the code by keeping break point after When. and execute the report, you will be debugging mode.
Hope it Helps
Srini

Retrieving user created variables from multiple instances using PAPI-WS

Hi,
I'm using PAPI-WS to retrieve a list of instances from Oracle BPM 10.3.1.0.0 using ProcessGetInstance. These are modeled as external tasks. ProcessGetInstance returns an InstanceInfoBean which has no place for user defined variables that were set when the instances were started.
The only way to get user defined variables seems to be to iterate through the entire list and send an InstanceGetVariable request for each one. InstanceGetVariable does not seem allow more than one instance id to be specified in a call from my testing. This is very inefficient since we could easily have hundreds of instances that we're trying to display. Is there some way to get the list of instances to include the user defined variables, or to get the user defined variables for more than one instance in a single call?
Thanks,
Steve

I can't reproduce the problem. This is what I see:C:\temp>javac -cp . Ttest.java
C:\temp>java -version
java version "1.6.0"
Java(TM) SE Runtime Environment (build 1.6.0-b105)
Java HotSpot(TM) Client VM (build 1.6.0-b105, mixed mode, sharing)
C:\temp>java -cp . Ttest
1
3
3

How To guide...for Flat File upload for User-Defined variables

Has anyone got link to the guide that describes how to do a flat file upload for populating User-Defined Variables ?
Any assistance will be appreciated.
Uche

SAP BW Business Planning and Simulation "How To" Guides
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ab9fd590-0201-0010-2590-be78eb70015c
How to Upload User-Specific Variable Selections in BW-BPS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how to upload user-specific variable selections in bw-bps.pdf
this is what you are looking for ?
Message was edited by: Murali

Read the value of user input variable during calculation of virtual char

Hello
Virtual characteristics is populated in custom BAPI based on values specified by user in the variable screen.
How to read the value of user input variable outside the user exit for custom variables?
The one way is to create faked user exit variable, read the value of user input variable in corresponding FM and insert it into table. Then value of this variable will be derived from the table.
Thanks

no answer

User entry variable with exclude values

Hello All,
I created a user entry/ default value variable, which allows multiple single values and is optional entry. And I also got to exclude few values from this infoobject as well as have a variable. When I select and exclude my value from selsction and run the report, I get a system error and the varibale is converted to mandatory entry. The detail error message is displayed below. Any useful input will be awarded
Diagnosis
Variable &V1& is used in the query in such a way, that an optional entry is not possible.
For example, you might be using an "Exclude", or the variable might be connected using OR to additional selections for &V2& in the global filter, but is still displayed in the columns selections.
It is also not possible to use an optional parameter variable to fill an interval selection in either the from-field or the to-field.
System response
Procedure
If you are able to accept the mandatory entry, you need not do anything. Otherwise you must work with several variables in the query. You can use an optional interval variable to do this.
Procedure for System Administration

Hello ,
I did try creating a variable with the foll details:
Variable Type : User Entry / Default Value
Variable Represents : Multiple Single values
Variable entry optional
When I run the query it converts my variable to mandotary entry. but I want to have optional user entry variable.
Any help will be awarded

BI 7 Bex Query - User exit variables after variable screen re-processed

User exit variables are not re-calculated after the variable screen is called up to re-run report with a new selection. Is there some way to force the user exit variables to change? I am aware of note 1064273 but this doesn't seem to help in these circumstances.
Example:
My Bex Query uses OI_FYPER for a static characteristic selection and I have defined a customer exit formula variable which uses the values in OI_FYPER.
All works fine when the query is run first time but if the user calls up the variable screen to change the selection and re-run the query, the customer exit formula variable is not re-calculated (customer exit is called but only with ISTEP = 3).
Software version is NS2004S (BI 7.0) SPS10, BI ABAP SP11, BI JAVA SP10, BI Front End Package 1401 rel 354.

hi.. i just came to know about this in another thread..
I_STEP 3 does not have I_VNAM stored. So, to access values at I_STEP3 :
data: l_range TYPE RRS0_S_VAR_RANGE.
if I_STEP = '3'.
read table I_T_VAR_RANGE into L_RANGE with key VNAM = 'OI_FYPER'
if SY-SUBRC = 0.
...code as required...
endif.
endif.
Customer-Exit for analysis Authorizations: i_step = 3, i_vnam is empty

How to create an user input variable for customer exit variable? - BW3.5

Hi Guru,
I have a requirement for the selection period of my reports. There are 3 possible reporting periods which should be user selectable:
1. Month: Current reporting month
2. Fiscal Year to Date
3. Project Year to Date
Here I need 2 variable to do these, 1 customer exit and 1 user input variable. I have created a variable customer exit to calculate all these requirement. But can any1 tell on how to create the user input variable for my customer exit? I need a user input variable with drop down list like below.
01-Current month
02- Fiscal Year to Date
03-Project Year to Date
I have create a new master data for this variable, but it's not working. What I need now is a standalone master data which do not need to link to any exiting records. Can any1 tell me how to create this?

Just go to the definition of the variable for which you have created a customer exit. There you will find a check box for "Ready for Input". Just tick that checkbox and the variable will be available as a selection variable in the reports selection screen.
Regards,
Yogesh

User.dir variable

Similar Messages

Maybe you are looking for